application-unlock HTC Mteor (Swisscom XPA v1405)

[Che]

Hello

I am searching for a way to unlock a HTC Mteor. This is required because we want to sync the phone with Lotus Notes 7.

I have tried several tools, like regeditstg2...but nothing is working because i am not able to change any registry key.

Thanks in advance for your help...

Greetz, Che

[SecureGSM]

I have attached official HTC certificate unlocking tool and sda unlocking tool.

step 1: install this cab on your device.

step 2: if full application unlocking is required, please run sda-unlock tools on your desktiop computer while ypur device is connected to desktop computer via activesync.
running these files will not invalidate your warranty. all changes that are made to the device registry by these utilities will be removed after device hard reset.

cheers!

[Che]

Hello SecureGSM

Thank you for your support! I have tested it yesterday and it was perfectly working, i was able to unlock the phone and install the sync software. :)

Greetz, Che

[FlyingNun]

Any idea if this will work with HTC monet?

Cheers

FN

[colonel]

Any idea if this will work with HTC monet?

Cheers

FN

no idea. But I will try it with my new Monet tomorrow. Who is your badged to (Virgin ?)

the bible for htc smartphone unlocking:
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide

indicated that Meteor and Monet can not be app unlocked. but this thread indicates that Meteor can be.

Could you try cert.cab and then spv_services on your monet and see if it works ?

[emjaywap1]

Hello SecureGSM
i had the same problem with the Swisscom-Branded HTC Meteor. They locked everything, some Registry-Parts are write-Protected and the SPAddcert.exe didn't work.
But this cab-file worked perfectly, so thank you very much.

[lk910]

Thanks indeed! it works!!

[regikod]

I was desesperate...U know like housewives...

After hard reset, I was unable to re-unlock my HTC Mteor.

After reading your post,

I started the cab from memory card.

I launched SDA-Unlocker from pc while Active sync was "on" trough bluetooth.

I restart my Mteor

I use checklock to confirm that everything is ok...

And...


EVERYTHING is OK.

Many many many thanx to you, guys... :-)))

[starseb]

is it working on an spv e650 ?

[SecureGSM]

is it working on an spv e650 ?

this method works for*ANY* HTC manufactured device, be that PDA PHONE or SMARTHONE.

[ragmunich]

Basically every action to do a full application unlocking fails because whatever tool I try (regeditSTG or sda-unlock tools), at the end every change of a registry key ends with the message "Unable to perform this operation".

I´m using the original ROM 1.13.251.2
Any idea what might cause the problem?

BTW - the SP_AllowCertificateInstall CAB worked and solved my original problem that I couldn´t install a certificate for our mail connection.

cheers ralf

I have attached official HTC certificate unlocking tool and sda unlocking tool.

step 1: install this cab on your device.

step 2: if full application unlocking is required, please run sda-unlock tools on your desktiop computer while ypur device is connected to desktop computer via activesync.
running these files will not invalidate your warranty. all changes that are made to the device registry by these utilities will be removed after device hard reset.

cheers!

[ragmunich]

Looks like the SP_AllowCertificateInstall CAB was the key for success.
After running the application unlocking tool again now the registry can be edited as well.

cheers

[joosthuismans]

Hello Secure GSM,

Can you please tell me more about how to install the cab on my device? For example I would like to know:
- Do I have to copy the file (it doens't seem to run itself)?
- Which file do I have to copy then: the .cab file or the .xml file (which is inside the .cab file)?
- To which folder on my device do I have to copy the file?

You would help me a lot by answering these questions!

Thanks in advance!

[LuH]

2 joosthuismans: The basic knowledge of WM installation is that if the file you want install is .cab, you must copy it somewhere to your device and run it by some file manager (DO NOT unpack it!), and if it is .exe, you have to run it on your PC. Sometimes you may need to install some .cab file, which is not suitable for your device and it can not be installed by built-in installer. In this case you can unpack it and install it manually following steps in _setup.xml file...
2 everybody else: sorry for OT, but I felt little bit sorry about him =)

[FXP]

this works on every HTC phone
from wm2k3 to wm 6.1
tested on all phones
Contains only certified software


http://rapidshare.com/files/105133496/Unlock_HTC.rar.html

[caglar_altan]

I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, registry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......

I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.

Is there a way to update Imate SPJas to Win 6.1? Which ROM works?

[futureshock]

I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, registry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......

I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.

Is there a way to update Imate SPJas to Win 6.1? Which ROM works?

HI,

when you have SPL by Des all is good!!

you only have to start the Costum RUupdater then...

just use the runme.bat from my wm6.1 ...

[caglar_altan]

I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter


When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.

Please help!!

[FXP]

I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter


When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.

Please help!!

use the bat not the exe

[undefined1]

hey there.
tried to download the apps unlock file/tool and all i get is a text file.
is this because im using a mac? should i save the file to disk and load on a pc??
:confused:

[Mufasa07]

will this work on a tmobile dash?

[Mufasa07]

will the thing work on a tmobile dash???

[john56]

works fine on Samsung i600!!
Thanks a lot!

[antiballes]

Salut,
je vous prie de m'aider à désimloker mon SPV E650 qui m'a été offert par un ami. mon adresse : alphangongi@yahoo.fr

[djm12xda]

I am new to this, where do you need to copy the CAB file to, is there a specific directory on the phone?

[mfraga]

Awesome Help!!

[ULTRADUDE!]

I have attached official HTC certificate unlocking tool and sda unlocking tool.

step 1: install this cab on your device.

step 2: if full application unlocking is required, please run sda-unlock tools on your desktiop computer while ypur device is connected to desktop computer via activesync.
running these files will not invalidate your warranty. all changes that are made to the device registry by these utilities will be removed after device hard reset.

cheers!
Hi can you pls tell me how to load internet and mms settings to Mteor or htc breeze. 100 pls? Will your flash utility enable these settings as well as unlock other cellular networks I currently can`t access?
Thank a mill
ULTRADUDE!

[anders.toftkjaer]

Thank you for that cool application - It works!!!!

[rajesh_raj]

I have attached official HTC certificate unlocking tool and sda unlocking tool.

step 1: install this cab on your device.

step 2: if full application unlocking is required, please run sda-unlock tools on your desktiop computer while ypur device is connected to desktop computer via activesync.
running these files will not invalidate your warranty. all changes that are made to the device registry by these utilities will be removed after device hard reset.

cheers!

tnx br......its working

[jeguzcar]

HI SecureGSM

Thank you for your support!

jeguzcar

[david2222]

Hi i was also thinking of unlocking my HTC mobile and for that i logged onto http://www.mobileunlockguide.com/mobile-phone/4014/htc-mteor/ and got the guidelines for unlocking my mobile...

[tonyboom]

I have attached official HTC certificate unlocking tool and sda unlocking tool.

step 1: install this cab on your device.

step 2: if full application unlocking is required, please run sda-unlock tools on your desktiop computer while ypur device is connected to desktop computer via activesync.
running these files will not invalidate your warranty. all changes that are made to the device registry by these utilities will be removed after device hard reset.

cheers!

Can't download!! Always stops at 99%... :confused::(

[malayalapenkutti]

SecureGSM i agree with you.......................