PDA

View Full Version : Huge issue ...

beerfoot
25th October 2006, 08:06 PM
Guys,
I have been trying to find solution on forum, but it seems it will not be so easy ... My MDA1 shows only Wilkommen bei TMobile and soft version G32S54, R3.23.00, 3.16.45 and that is all :( It does not response on power or anything - it simply shows me Wilkommen or not (if power is unplugged and battery empty). You may see how it looks here: http://www.jester.it.pl/mda/MDA1.jpg I have only USB cable - so if there is any chance to solve this problem having only this cable - please show me the way.
What is the most important - my Active Sync does not see connection :(((
Help ...
TIA
B
LumpiStefan
25th October 2006, 10:39 PM
I think your ROM is corrupt. Try reflashing.
Instructions can be found here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD

Stefan
beerfoot
26th October 2006, 07:19 PM
Hi there,
Thanks for your help - right now I need to find appriopiate ROM Image and it should work...
BR,
B
beerfoot
26th October 2006, 07:43 PM
It seems that I do not have ROM file ;((( and one I found does not work....
Any suggestions?
beerfoot
26th October 2006, 08:25 PM
I will try to cook sth. and let you know ;)
archeon
26th October 2006, 09:46 PM
When I first tried to image my device, the usb flash mode using XDA tools didn't work. I think this was because I was using windows vista. Anyway this forced me to use the direct sd flash method, and thus I didn't get the instructions to cold reset my device after the flash, which does seem to make a difference. Have you tried that?

<edit>What do you mean it does not work? What happened exactly when you tried?</edit>
beerfoot
26th October 2006, 09:54 PM
OK - first time did not work, because Hard reset did not worked :) My mistake ... after reset it seems fine - I made some cooking and I have nice ROM right now :) but... After another reset and after second upload Boot appears and Wallaby starts making tests. After last test made Diagnostics screen appears and to be honest I do not know what to do :( Hard reset just shuts down MDA and I cannot switch it on - I can start from the same begining - tests etc. I know I am really close to solve that ... and we will see.
Guys, thanks for your help :)