JOGGR Config Utility

[am-imate]

Hmmm, anyone know how to silence the ringer when a call comes in and you just want to "shut the phone up" without declining the call? With my Wizard you can just hit the volume slider, and it'll make the ringer go off.

Thanks for your help in advance.

[JwY]

i don't have mine yet, but did you try the joggr when the call comes in?

[am-imate]

Yep tried that.. Even put the JOGGR in volume only mode, and that didn't shut it up either... I know on a lot of other phones you tap the power button to shut it up, but no button's will do it. :(

I'll keep trying..

[am-imate]

Argh, I've still not had any luck in finding a way to shut it up when a call comes in.. *sigh*

[john1027]

I don't think there is a feature to do what you want. Ignore or the end button send it directly to vm as you no doubt have figured out already.

[themandlh]

I can touch the volume strip on the dash and it mutes the phone call.
I know, not very helpful, but thought i'd let you know.

[davidology]

Hmmm, anyone know how to silence the ringer when a call comes in and you just want to "shut the phone up" without declining the call? With my Wizard you can just hit the volume slider, and it'll make the ringer go off.

Thanks for your help in advance.


Look in the registry around:

\HKEY_CURRENT_USER\ControlPanel\JogBar\Settings\

There's a key there called EnableRingVolumeMute

If there isn't, try creating it and setting it to 1. Mine seems to mute the call fine with that setting.

[Manzil]

Hitting the "reduce volume" slider on my dash silences the ringer -- no registry hacks needed. Don't know if this works on HTC unit...

[am-imate]

El Perfecto!!!!!!! The registry hack worked on the S620.. Apparently it comes with EnableRingVolumeMute set to 0.

Muchas thanks!

This needs to go in a FAQ.

[jse75]

Has anyone figured out how to change the JOGGR's launch outlook button (bottom button) to launch something else, say, FlexMail? Even though I have FlexMail set as the default mail program, it still launches Outlook...any ideas?

I hate Outlook email (it does not work well with IMAP, like, it won't delete things unless you resync it manually. Painful!)

jason

[jse75]

Got this from www.smartphonethoughts.com just now:

Well that sure didn't take long. Just 1 day after the Dash hit the streets, akil, staulkor, and some others over at Howard Forums has found a way to change the functionality of the volume jogger on the Dash to include scrolling and launching programs. You'll need to modify the registry to get this to work. So, make sure you back things up before making any changes. Here are the changes you need to make to get this working.

To Enable Scrolling:
• HKCU\ControlPanel\JogBar\Settings\SwitchToAudioFun c = 0

Tap on Bottom Key Launches IE Mobile:
• HKCU\ControlPanel\JogBar\Settings\BottomKeyApplica tionName = \Windows\iexplore.exe

Tap on Top Key Performs Back
• HKCU\ControlPanel\JobBar\Settings\TopKeyApplicatio nName = BACK

You can replace any these with your favourite applications. Other common applications would be START (to Launch the Start menu), \Windows\tmail.exe to launch Outlook Mobile, or http://www.SmartphoneThoughts.com to launch IE Mobile with your favourite website Wink Let us know how you make out!

[mrf1022]

Here is a utility I wrote that will let you change almost all of the JOGGR settings on the phone. It will also let you change the apps that launch when you press the Camera key and the T-Zones key. The app shortcuts must be in the shortcut file format because I didn't know enough about the Windows CE LNK format to simply let you pick an EXE.

I am going to add support to let you change the apps that launch from the JOGGR bar, but wanted to get this version out now so you don't have to dig through the registry to get scrolling working.

It requires the .NET CF 2.0 or higher.

[am-imate]

Sweet, good job! Will give it a shot.

This would be a good base for a simple DASH/S620 tweak util.. 'Cause there's a couple good tweaks out there as well.

[etperez22]

Is there a way to do this on the Dash without having the touch strip/jogger enabled. So basically all I want it to do is silince the ringer.

[pphi]

which compact framework .net am I to install? I tried installing the ARM versions but they refused to install on the Dash.

[mrf1022]

which compact framework .net am I to install? I tried installing the ARM versions but they refused to install on the Dash.
The version for the ARMV4I is the correct one. Try the installer at http://www.microsoft.com/downloads/details.aspx?FamilyID=0c1b0a88-59e2-4eba-a70e-4cd851c5fcc4&DisplayLang=en. That link will take you to the .NET CF 2 SP1 MSI file.

[jcjdoss]

Works like a charm. Very nice job

[etperez22]

I have .NET CF 2.0 spk1 with a T-Mobile DASH.

But still does not work

[mrf1022]

I have .NET CF 2.0 spk1 with a T-Mobile DASH.
But still does not work
What doesn't it do? Does it even run?

[etperez22]

Basically when I run it it gives an Error.

An unexpected error has occurred in the DashConfig.exe
Select Quit and then restart this program or select Details for more information.

When I hit details:

UnauthorizedAccessException
at System.IO.__Error.WinIOError()
blah blah blah.. basically a whole lot of errors

I would love for this to work..

[pphi]

I get the same error too. I had to install the .net cab by beaming it instead of using activesync since I'm on a mac.

[xandermac]

I'm just getting an UnauthorizedAccessException running Dashconfig.exe

[DanITman]

You probably have to Application Unlock the Dash before you can run this software.

This is for the SDA so I'm not sure if it will work on the dash or not. It's worth a try.

http://www.bengalboy.com/modules/newbb/viewtopic.php?topic_id=598&forum=8

[pphi]

That worked! Although I couldn't alter the second registry entry as the tutorial states, nor could I find naked women to hang around while I did it :D

but the JOGGR utility works now.

Strangely enough, when I enable the JOGGR icon option, it only shows up if I soft reboot but then goes away shortly afterwards. Must be T-mobile ROM thing that's interfering with that.

Also, is there a switch between JOGGR functions and system volume?

[.PoNeH]

I have been unable to install (drag the registrySTG.exe) onto the device. It doesn't allow me to drag it or copy and paste it. Is there something I have to enable on the device?

[mrf1022]

You probably have to Application Unlock the Dash before you can run this software.
Yep. I completely forgot about that. I signed the app with the MS developer certificate, which T-Mobile doesn't have as a trusted source.

Also, is there a switch between JOGGR functions and system volume?
You can use the Dash Config app to change the JOGGR's function by changing the option under "JOGGR Mode".

Would you guys want to be able to map the camera key to toggle the JOGGR from scroll mode to volume mode?

[.PoNeH]

How do I enable Data Connection. It isn't highlitable in Comm Manager...

[GuardianZX9]

Is there any way to remap the Email key?

I wold like to to go right to text messaging or something else if possible.

Thanks
G

[etperez22]

is there a way that the only thing that the joggr can do isdo a call rejection when an incoming call in comming?

[sp4rky]

I had to AppUnlock and then it worked. Awesome tweak! Thanks

[RazrV3]

Yep. I completely forgot about that. I signed the app with the MS developer certificate, which T-Mobile doesn't have as a trusted source.


You can use the Dash Config app to change the JOGGR's function by changing the option under "JOGGR Mode".

Would you guys want to be able to map the camera key to toggle the JOGGR from scroll mode to volume mode?

It would be nice to design the interface to allow the enduser to map any key to the jogger. Also provide a config file the user can define the keys and reg settings. This way you won't have to build 10,000 different versions or manage different configurations soley by code.

Just a suggestion.

[googcs]

Can we share this utility?

[desertratshorty]

I get the same error too. I had to install the .net cab by beaming it instead of using activesync since I'm on a mac.
How were you able to extract the cab file out of the msi file? I am on a Mac as well and I haven't been able to figure this out.

[pphi]

Would you guys want to be able to map the camera key to toggle the JOGGR from scroll mode to volume mode?

Yes! On the fly is what I was looking for. even possible to map the toggle to one of the virtual top or bottom buttons on the JOGGR would be nice too.

[pphi]

How were you able to extract the cab file out of the msi file? I am on a Mac as well and I haven't been able to figure this out.


I didn't. I had to run it on Virtual PC and execute the exe file and then dig for the cab file.

[mrf1022]

Also provide a config file the user can define the keys and reg settings. This way you won't have to build 10,000 different versions or manage different configurations soley by code.

Just a suggestion.
The thing is that there is more logic to this app than simply being a registry editor. What other kinds of things would you want to edit?


Can we share this utility?
Sure. You can redistribute it as much as you want.

[googcs]

Thanks...I have posted your utility on HoFo.

[swivel]

Is there any possible way to completely disable the in-call volume function, while retaining the scrolling functions? I am CONSTANTLY bumping the volume up and down during calls with my ear/face, etc. This is the only thing I absolutely hate about the Dash. If you could come up with a solution, even if it involved triggering something with a remapped key, I would be very grateful.

[inkdemon]

^^^Ditto^^^ Volume function is a pain unless you remember NOT to hold it on the bar while in a call.

[dkurk]

Love the utility. I'm having some unexpected behavior from the Jogger in that every now and then I'll bruch my finger by the lower button and it will open up messaging. Anyone else experience this?

Also, basic functions? I understand the scroll up, scroll down and double click. Is there a way to go back and forward in the application you're using Jogger?

[sp4rky]

Love the utility. I'm having some unexpected behavior from the Jogger in that every now and then I'll bruch my finger by the lower button and it will open up messaging. Anyone else experience this?

Also, basic functions? I understand the scroll up, scroll down and double click. Is there a way to go back and forward in the application you're using Jogger?

Yes I am experiencing this also, I just figured it was a feature.

[JwY]

double pressing the bottom is supposed to bring up outlook
double sliding but holding it is continuous scroll and you can control the speed by moving it up or down

[silverpassat]

I need to disable the JogBar becuase I keep changing the volume inadvertently during calls and it's annoying. How do I adjust the volume during calls if I have the JogBar disabled? Thanks.

Kennie

[.PoNeH]

Same here. I use the speakerphone a lot, so I am constantly needing to turn it down. I need something easy to switch, but the jogbar is just always changing by mistake.

[monakh]

Hi, mrf1022. Any update :> ?

[.PoNeH]

Sorry for my ignorance, but where do I install the Compact .NET application? Do I send it to the device and install on it? When I try to run it on the laptop, I get a message saying that it is already installed.

[monakh]

No problem man :)

Yeah, you copy the file on the device and run it there.

Sorry for my ignorance, but where do I install the Compact .NET application? Do I send it to the device and install on it? When I try to run it on the laptop, I get a message saying that it is already installed.

[silverpassat]

Well, I tried making a call and basically pressed every button. No luck changing the volume without the jogbar. Looks like the only option is to set the Dash to full volume then turn of the jogbar...

[mrf1022]

Hi, mrf1022. Any update :> ?
Soon. I'm working on a way to allow for another volume control method (not JOGGR), and a hotkey to toggle the JOGGR modes without launching the config utility.

[swivel]

Soon. I'm working on a way to allow for another volume control method (not JOGGR), and a hotkey to toggle the JOGGR modes without launching the config utility.

You're awesome

[.PoNeH]

Good! I despise the JOGGR on the Dash. It is really irresponsive and I am always catching myself manipulating the volume when talking on the phone. It would be neat to be able to use others keys to manipulate the volume instead.

[swivel]

Yeah. Up and Down keys on the directional pad don't serve any in-call function. It would be great to use those keys instead.

[mrf1022]

Yeah. Up and Down keys on the directional pad don't serve any in-call function. It would be great to use those keys instead.
That's the plan.

[swivel]

That's the plan.
You could be my hero.

[sp4rky]

agree

mrf1022 to save the day!

[battleangel6]

Im getting the same error. im about to install .net 2. Ill let you know how it goes

[swivel]

I take it this app hasn't been updated yet?

[sp4rky]

Ya I'm curious too. I finally just decided to turn the Joggr off because it was more a problem. Im interested in the other volume feature in this application that mrf1022 is planning.

[mrf1022]

No, it hasn't been updated yet. I am still trying to find a good way to have the volume is controlled by the d-pad. I will have time this weekend finish it, so no updates till then.

[swivel]

No, it hasn't been updated yet. I am still trying to find a good way to have the volume is controlled by the d-pad. I will have time this weekend finish it, so no updates till then.
Sweet. Your work is very much appreciated. Getting a replacement Dash on Monday so I'll be spending a good portion of the day setting up my new one like I have my current one set up. Sadly, I'll actually enjoy doing so.

[Caspian]

Would you guys want to be able to map the camera key to toggle the JOGGR from scroll mode to volume mode?

I would love the JOGGR to be active only for maybe a second after a specific keypress. I want to like the JOGGR, but it gets activated far more often when I don't want it than when I do.

Thanks,

LD

[datacrime]

HI,
I have a S620 and not a dash. I was wondering what you type in to chane the camera button in order to launch comm manager?

Thanks

[swivel]

HI,
I have a S620 and not a dash. I was wondering what you type in to chane the camera button in order to launch comm manager?

Thanks

Windows\CommManager.exe

[swivel]

By the way, whatever happened to the update?

[dan24]

No, it hasn't been updated yet. I am still trying to find a good way to have the volume is controlled by the d-pad. I will have time this weekend finish it, so no updates till then.

can't wait for the update! have you also thought about a way to control system volume because when set as joggr, system volume cannot be changed. i have to disable joggr, change system volume, then change it back to joggr.

i think i can speak for everyone when i say that we appreciate your work!

[4mynikka]

use the 5-way, down button should work

[swivel]

use the 5-way, down button should work

Obviously that would be anyone's first try. But, no, it doesn't.

[nemesis202]

someone should make a program to change volume using the 5-way button. i am willing to pay a reasonable amount for it as it should be quite useful.

[swivel]

someone should make a program to change volume using the 5-way button. i am willing to pay a reasonable amount for it as it should be quite useful.

Someone was working on such a feature. Read the JOGGR utility thread a few down. I don't think he's having much luck.

[siii]

same problem here.. I'll check back to see if theres any luck..

[snudel]

this also gives me a hard time. the joggr is just to sensitive.

[Intergalactic]

Someone was working on such a feature. Read the JOGGR utility thread a few down. I don't think he's having much luck.
The new software fix is out for the volume slide bar. It turns the Dash into a super device. Somebody did T-mobile a big favor. Get this fix over at howardforums.

[snudel]

hm you have to be registered to search. strange forum. does anyone have a link?

[Intergalactic]

I need to disable the JogBar becuase I keep changing the volume inadvertently during calls and it's annoying. How do I adjust the volume during calls if I have the JogBar disabled? Thanks.

Kennie From Intergalactic Communications, I like what HTC and TMO did with the Dash, thanks for the volume control slide bar (ERROR), everybody is mad, because they think it does not work right, Wrong! Go to (http://www.1800message.com/default.aspx) Turn you Dash into the ULTIMATE INTERGALACTIC DEVICE and let your fingers do the walking and Slide in style. The SUPER FIX, first the DASH need to be (APPLICATION UNLOCK). This is not a (SIM OR CID UNLOCK FOR THE DASH) Secret places: go to http://www.htcwiki.com and look for SurrealNetwork App unlock cab file, this file will add super speed to your DASH. This will disable the volume control bar as the default JOGGR function (back, scroll, e-mail) and will turn it into the ultimate scroll bar and volume control system. Another must have (APP) ( THE DOPPLER WEATHER RADAR APP), GO to (dopplerradio.net/dopplermobile-beta). Live TV, the SLINGBOX works in full screen on the DASH, even using (GPRS/EDGE). Give my regards to MIKESPIKLE AND MENNEISYYS, children from outter space..............! You know me as STARGATE51.......................*****!

[Intergalactic]

This is FIX is the mother of all DASH hacks.........!

[fire00]

yeah but still we don't have any solution how to enable the direction pad to be working as volume buttons. Or how to solve the problem that you first need to push a button in order to activate the screen and then to be able to adjust volume with the Joggr..

[lezouave]

The new software fix is out for the volume slide bar. It turns the Dash into a super device. Somebody did T-mobile a big favor. Get this fix over at howardforums.

What exactly are you referring to?

[swivel]

From Intergalactic Communications, I like what HTC and TMO did with the Dash, thanks for the volume control slide bar (ERROR), everybody is mad, because they think it does not work right, Wrong! Go to (http://www.1800message.com/default.aspx) Turn you Dash into the ULTIMATE INTERGALACTIC DEVICE and let your fingers do the walking and Slide in style. The SUPER FIX, first the DASH need to be (APPLICATION UNLOCK). This is not a (SIM OR CID UNLOCK FOR THE DASH) Secret places: go to http://www.htcwiki.com and look for SurrealNetwork App unlock cab file, this file will add super speed to your DASH. This will disable the volume control bar as the default JOGGR function (back, scroll, e-mail) and will turn it into the ultimate scroll bar and volume control system. Another must have (APP) ( THE DOPPLER WEATHER RADAR APP), GO to (dopplerradio.net/dopplermobile-beta). Live TV, the SLINGBOX works in full screen on the DASH, even using (GPRS/EDGE). Give my regards to MIKESPIKLE AND MENNEISYYS, children from outter space..............! You know me as STARGATE51.......................*****!

I nominate this post as the strangest, stupidest, most useless, redundant and confusing post of recent months.

We already know about the various methods for enabling the JOGGR function of the Dash's touch-sensitive strip. You didn't even bother to read through this thread before posting that crap, did you? That post has no business in here and doesn't even answer the original poster's question.

[gorgol]

I am also getting errors trying to load DashConfig from the storage card.
I have Net CF2 sp1 loaded and being used by other programs,
The error message(s) follow

ERROR
An unexpected error has occured in DashConfig.exe
Select Quit and then restart this program, or select Details for more information.
(Quit and restart gives same results)
Details
DashConfig.exe
UnauthorizedAccessException

at System.IO._Error.WinIOError()
at System.IO.FileSysteInfo.set_Attributes()
at DashManager.frmMain.LoadCurrentSettings()
at DashManager.frmMain.frmMain_Load()
at System.Windows.Forms.Form.OnLoad()
at System.Windows.Forms.Form_SetVisibleNotify()
at System.Windows.Forms.Control.set_Visible()
at System.Windows.Forms.Application.Run()
at DashManager.Program.Main()




That's it.....does that help?

[swivel]

can't wait for the update! have you also thought about a way to control system volume because when set as joggr, system volume cannot be changed. i have to disable joggr, change system volume, then change it back to joggr.

i think i can speak for everyone when i say that we appreciate your work!

I think it's safe to say that this project has been abandoned.

[emilem]

Here is a utility I wrote that will let you change almost all of the JOGGR settings on the phone. It will also let you change the apps that launch when you press the Camera key and the T-Zones key. The app shortcuts must be in the shortcut file format because I didn't know enough about the Windows CE LNK format to simply let you pick an EXE.

I am going to add support to let you change the apps that launch from the JOGGR bar, but wanted to get this version out now so you don't have to dig through the registry to get scrolling working.

It requires the .NET CF 2.0 or higher.

most progs ask for .net 2.0 and some for 1.1 ... how do I install them ? can I install both ?
I cant get anything to work maybe you guys can help me out ?

[DaveD1978]

Somtimes the jogger acts on its one and stops when i reboot my device. Does anybody have the same problem?

[devGOD]

i completely disabled my jogger it was to annoying. when i pickup my phone when its ringing and if i touch the jogger it'll mute the ringing... i even try the jogger hacks to change it to a scroll bar, that's buggy as well. so i just turned off the jogger and use profile setting to change the system volume. if i want my phone to be silient i just hit the power button once and the quick menu screen comes up and i select profile. no more messing with the jogger

[adhussain]

I have a HTC s620 & I just use the Joggr for volume and to silence an incoming call.

[systdow666]

i think we may have come across the main reason tmobile disabled it is that bug wit the ringing being muted

[fishel]

If someone knew the command to bring up the volume app - that command can be assigned to a button.

[gorgol]

What utility? I have tried one utility that turns the volume strip into a jogger but did not care for it.
A link would also be nice.

[fire00]

What utility? I have tried one utility that turns the volume strip into a jogger but did not care for it.
A link would also be nice.

the next nomination as an useless reply.

what fishel was talking about is to find the command of volume and not an utility. for assigning commands to buttons you actually don't need an utility, this can be done by editing the registry.

[fishel]

Well I found such an app --- on XDA-Developers (http://forum.xda-developers.com/showthread.php?t=260213) also here (http://handheld.softpedia.com/get/System-Utilities/Enhancements/Volume-Ctrl-9249.shtml#)

So I mapped it to the bottom jogger button on my dash and the D-Pad up and down are volume up and down, to make it go away just tap the bottom jogger button again.

Now if it could mute the volume I would be a happy camper. :)

[chaznet]

...the post and download page both mention this being a PocketPC program, how'd you get it to work on your Smarthphone?

[fishel]

As long as the app is made to not need touchscreen input - often it will work. Maybe. :p

Anyway it works.

[lafester]

this works!!
I tried mapping to the joggr but it didn't work very well so i mapped it to the tzones key. works great :)

maybe someone can take this app and make it a little more dash friendly.

thanks for the link!

chris

[lafester]

only works for system volume but its better then nothing!

thanks, chris

[turtle10]

I've read about how to change the volume strip to do other functions but when reading the directions, I don't know what HKCU means?

What does that mean? Are there any easier instructions to follow?
I want to use it like the track ball of the Blackberry.
Thanks

[tomdot]

turtle10:

You have the modify the Registry of the device through a Registry Editor application to edit those keys.

HKCU refers to HKEY_CURRENT_USERS

***disclaimer***
If you are unfamiliar with the registry, it is highly advised that you don't modify the buttons.

[oplitic]

with this program you can make the jogger silence the ringtone, won't reject it unless you touch and hold it for 2 secs(you can change the duration or turn reject off) run it from your SD card or your device

http://rapidshare.com/files/23560774/DashConfig.exe.html


**note: it doesn't install to your start menu, you just run it from wherever you save it, each time. you can move it or make a shortcut of it in total commander and move it to the start menu to make it easier

[neggie]

so yeah i downloaded setjob bar and using slider as a the jogger BUT when i make calls or on the phone the volume still changes on me by accident. Has anyone come up with a way to use stip as jogger w/o ever having nothing to do with the volume control?? thanks know probley asked before but couldnt find it
neg

[lafester]

i was having the same problem with set jogbar.
i was thinking about trying the registry chages shown in the faq rather then using the program.

if you try it let us know how it works.

[richy240]

Is there a way to use the volume strip hack for scrolling AND silence incoming calls without immediately sending the caller to voicemail? I would like to use the volume strip as a scroll bar and still be able to silence the device when someone is calling.

Is this possible?

[chaznet]

It's a quick tap to the volume strip that'll mute the incoming call, without any changes at all. A tap 'n hold a bit longer and it goes to voicemail. Personally, I found a regedit somewhere to get rid of the longer tap to voicemail as it was so easy to accidentally send to voicemail instead of muting the incoming call. If you want to do the same, here it is:

Touchbar Reject Call setting
Set to 0:
HKEY_CURRENT_USER\ControlPanel\Jogbar\Settings\Ena bleRejectCallFunc

As far as using the touchbar for scrolling, good luck -- tried that and turned it off after 5 minutes -- what a pain.

[richy240]

I know, scrolling with the strip sucks. But I keep bumping the strip with my ear and turning the volume up/down unless I have the scrolling feature activated. Is there any way around this

Anyway, the touch strip sucks. If it weren't for that, this device would be *perfect*. Let's hope the next one has a real JOGGR instead of this crappy strip!

[ballr56]

When i run it i says an unexpected error in dashconfig.exe slect quit and then restart the program

[padrino]

Sorry to bring this up but is there a way to accomplish this with the JOGGR on Scroll? Also is there a way part from the JOGGR to do this? Cos it seems theres no way to silence a call.
edit: I have tried with the Jogger on other settings and it still doesnt work. I have the Rogers S621R.

[chaznet]

There is a way, but the Rogers version must accomplish it with different registry changes than the Dash or S620-- guess you'll have to wait for someone to figure it out, maybe that'll be you...

Sorry to bring this up but is there a way to accomplish this with the JOGGR on Scroll? Also is there a way part from the JOGGR to do this? Cos it seems theres no way to silence a call.
edit: I have tried with the Jogger on other settings and it still doesnt work. I have the Rogers S621R.

[padrino]

Guess i'm gonna have to read up on registry editing then. How does this work with the S620 rom? Cos then i might just go ahead and flash it to a s620. Anyone know if i can back up my rom? Sorry i'm new to this. Been a smartphone guy for only a year and i had a treo 650 so im trying to learn as much as possible from you guys.

[adhussain]

To mute an incoming call by double pressing hte Jogg on the s620 use the following regedit

Hkey_current_user-->control Panel-->Jogbar-->Settings-->EnableRingVolumeMute the value data should be set to 1

Hope this helps :)

[huemedia]

Has there been any progress here? I too find the jogbar too sensitive and given that Im left handed it doesnt work all that well for me. I really would like to be able to adjust in call volume using the D-pad. Any help would be greatly appreciated.

Thanks

[amadhoun]

Hi Dears,

I have a question, i just bought the HTC s620 and i saw somthing very strange, how can i silent a call if i dont want to answer?? in the previous Windows Mobile phones i was just scrolling the Volume Bar and it shut the ring.

Thanks for the help

Regards

[ichanz]

yeah, i want to know that to...
i have try anything but is doesn't work,

[lafester]

on the dash you hit the touch strip but since it doesn't work you have to send it to voicemail with the red key.

[padrino]

Yeh i have the same problem on my rogers device. I've searched everywhere and cudnt come up with anything. I think for Dash owners, they just hit the joggr and it goes off. We'll see if flashing to Excalibur Rom helps. Im waiting for the WM6 excalibur release, then i'll flash it.

[richy240]

That's how you do it: tap/touch the JOGGR and it goes silient. Unless, of couse, you've disabled it because it SUCKS (like I have). In that case, you can't silience a call, just ignore it. You can thank HTC for that.

[chaznet]

After flashing my Dash to WM6, I noticed the touchstrip defaults to not being able to reject calls. That's good, the first time around with WM5 it defaulted to being on for that and it was a pain until I found a registry entry that shut it off.

Previously, I could tap the strip during an incoming call to silence the ring, but not reject the call. I don't seem to be able to do that with WM6, or at least I haven't figured out how yet. The registry seems to have this turned on, but couldn't get it to work.

I have noticed the touchstrip is much better behaved for volume control in this version. Previously, you would just touch the uppper or lower part of the strip and the volume would change -- now, you must slide your finger upwards or downwards for volume to change -- harder to accidentally change the volume.

[jdhatt]

There is a regedit to enable the JOGGR to silence an incomming call, but not reject it. search the forum for a regediting program and you can make the following edit:

Mute Function:
\HKEY_CURRENT_USER\ControlPanel\JogBar\Settings\
EnableRingVolumeMute
change to 1.
(thanks to xda-developers)

then you want to tap the joggr once or twice to silence it - if you have vibe & ring, it might not silence until the current vibe sequence pauses (a bit of a delay)

[chaznet]

Have already done that -- doesn't work with the new 'release' WM6 ROM, at least not for me...

There is a regedit to enable the JOGGR to silence an incomming call, but not reject it. search the forum for a regediting program and you can make the following edit:

Mute Function:
\HKEY_CURRENT_USER\ControlPanel\JogBar\Settings\
EnableRingVolumeMute
change to 1.
(thanks to xda-developers)

then you want to tap the joggr once or twice to silence it - if you have vibe & ring, it might not silence until the current vibe sequence pauses (a bit of a delay)

[micrors4racer]

How do i get it working in WM6? Unless someone can tell me how to adjust the system volume with out using it haha.

[monakh]

How do i get it working in WM6? Unless someone can tell me how to adjust the system volume with out using it haha.

Settings-->More..-->More..-->Volume Strip Settings [Enable Volume Touch Strip].

[sp4rky]

Settings-->More..-->More..-->Volume Strip Settings [Enable Volume Touch Strip].

Doesnt work for me, I think that was the point of the thread.

[stevemw]

Have you installed the SetJobBar program from 1800Message.com? You may need to re-run SetJobBar and set up your volume settings any time you use the Volume Strip Settings applet.

[alfredtv]

is it possible to make it a scroll instead of assign a function like BACK so I can scroll through emails or something like that??

[bkeaver]

is it possible to make it a scroll instead of assign a function like BACK so I can scroll through emails or something like that??

follow this link and look for my post on the registry key edit.
http://forum.xda-developers.com/showthread.php?t=304579&page=14&highlight=joggr

[sandro.bertini]

Hi,

This is probably a stupid question but I searched for it in the foruns and on the internet and couldn't find an answer.

I used SetJogbar to change my Dash's Joggr back to act as the HTC Jogbar, but I am having a lot of trouble using the app buttons on the dash (the upper and lower portions).

I always start the mapped apps (Task Manager and Mobipocket) by accident, but when I want to use it it's always very dificult. I keep on tapping in diferent parts of the JOGGR, sliding my fingers slightly and making all kinds of crazy movements and eventualy the app is launched.

Is there a correct way to use it, I got a faulty unit or is it actualy very badly implemented?

Thanks for the help.

Sandro

[redwildebeast]

double tap the button quickly

[mmm, beer]

Look at the Joggr bar in this photo of the HTC S620...

http://www.pocket-expert.de/images/htc/HTC_S620.jpg

If you haven't seen this before, maybe it will help you visualize where the buttons actually are, which is what really helped improve my Joggr skillz.

[lafester]

setjogbar sucks!

of course the volume strip was poorly implemented but you aren't even using it the way it was intended. if you want a jogbar get the htc620.

[redwildebeast]

whats wrong with setjogbar? it makes the dash joggr perform exactly like it does on the s620. it just puts it in an easy to use app instead of havin to go in and edit the registry.

[lafester]

i tried using it in wm5 and it made the volume strip worse then ever.

the volume would still change and then you couldn't change it back.

[sandro.bertini]

Double-tap.....


Thank you very much, it's working perfectly.

Sandro

[UnicornKaz]

Did anyone noticed the wrong spelling that came with the default WM5 HTC ROMS within the JOGGR registry folder ???

HKCU\ControlPanel\JogBar\Settings\ResotreDefaultSe ttings


:eek: :eek: :eek:

[roback80]

Is there a way to tell what .net I have on my DASH?

And does that link for the app unlock actually work on the DASH?

[mistert1]

it wont let me run this on my cavalier..it says dash only then kicks me out. can you open this up so itll run on the cavalier...joggr is the same

[mobounce]

I just found this App...completely awesome!!! Thanks! Works great on my WM6 dash :)

[BleuTango]

FYI: The JOGGR configuration in the registry is located at:
HKEY_CURRENT_USER\ControlPanel\JogBar\Settings

You should be able to make most of the changes there using a registry editor.

[lesserknight]

Hi, after the update to WM6 my Joggr doesn´t work, what can i do?
please help meee...

[TheBlueOne]

You´re the one who has the s621 from telcel, right?
Did you upgrade with the T Mobile ROM??

[UnicornKaz]

Hi, after the update to WM6 my Joggr doesn´t work, what can i do?
please help meee...

so ... you finally got WM6 ROM working ?? :rolleyes:

BTW ... SEARCH is your friend ... "JOGGR"

I found this:
http://forum.xda-developers.com/showpost.php?p=1249129&postcount=133

[lesserknight]

You´re the one who has the s621 from telcel, right?
Did you upgrade with the T Mobile ROM??

Yes i´m... yesterday i upgrade my htc 621, but now the JOGGR doesn´t work. I don´t find the option of the JOGGR.

[lesserknight]

so ... you finally got WM6 ROM working ?? :rolleyes:

BTW ... SEARCH is your friend ... "JOGGR"

I found this:
http://forum.xda-developers.com/showpost.php?p=1249129&postcount=133

works perfectly ... thanks a lot...

[Rabia]

how can i mute the rining in an incoming call mode, i tried everything with the jogger, any advice on this? thanks in advance

[Pagemakers]

Is it possible to remove the JOGGR icon from the top of the home screen?

[r0p3]

Yes I did it at my S620 with WM5.
It's a Registry Entry but I don't remember the key.
Simply do a search for "joggr" in the registry with smartione or other PC-based Editor.
Would be sth. like HKLM/Software/HTC....

[Pagemakers]

Thanks.

It's:

HKCU/Control Panel/Jog Bar/Settings/Values/EnableHTCJogBarIcon/0

[r0p3]

sorry, I remembered completely wrong but you found it at least - thanks for the link

[Pagemakers]

No. Thank you :)

[ScAnY]

Nice Tip ! thanx !

[freakmax]

Is it possible to disable the back and the outlook button?
How can I do this?
I just want the scrolling ability.
Sometimes the back and the outlook button are annoying when accidentally hitting them.

[wm1]

I have a T-mobile Dash and T-mobile disabled the joggr ability and made it a volume button. using the attached program you can enable the Joggr to Scroll and you can assign functions and programs to the buttons (e.g. my top button opens pie and the bottom opens the task manager). I don't know if this will work for anyone else but it's worth a try.

[aameerp]

thnx 4 the fix

[aregaily]

When you have an incoming call alert you have one of two options, either to answer or to ignore and ignoring the call will cancel it and give busy tone to the caller. Is there any way to only make the alert goes silent and leave it without dropping it? most of all other phones do this, I don't know why this does not exist in WM smart phones.
I have HTC S620 with windows mobile 6 installed on it

[SecureGSM]

As far as I know the tap on the JOGGR will silent the call.
Hope it helps.

[aregaily]

I tried it now, the Jogger does not do any thing during an incoming call alret. so what do you mean?

[SecureGSM]

Yes, it does.

as of Excalibur ROM version V1.11.407.2:

...Implement the double click to mute ringer for scroll mode.



1. make sure that JOGGR is in scroll mode

2. during incoming call: make double-tap on the JOGGR between "up" and "down" arrows.

3. Call goes silent immediatelly.


I have verified that with latest WM6 official ROM and it works fine.


P.S. It works also in Adjust Volume Mode. I have verified that.

I tried it now, the Jogger does not do any thing during an incoming call alret. so what do you mean?

[johnnylavah]

Yes, it does.

as of Excalibur ROM version V1.11.407.2:

...Implement the double click to mute ringer for scroll mode.



1. make sure that JOGGR is in scroll mode

2. during incoming call: make double-tap on the JOGGR between "up" and "down" arrows.

3. Call goes silent immediatelly.


I have verified that with latest WM6 official ROM and it works fine.


P.S. It works also in Adjust Volume Mode. I have verified that.

works fine for me too...

[vince88]

Ok, I have the same problem, but the difference is that I read your post all the way and I see where the bug can be coming from. If HE like me is using WM5 and not WM6, that may be why the jogger does not let you silence the call.

QUestions now:

If I upgrade to WM6, is there any chance my phone will be locked?
(From what I can see, it was a factory unlock phone, since I have no logo from any carrier)

If I dont like WM6, how can I set it back to WM5?

Thanks a lot for your help every one!

[SecureGSM]

You do not have to upgrade your handset to WM6 just because of this minor issue.
Here is something for you to try first:

It will mute the ringer as soon as you touch the jogger.

\HKEY_CURRENT_USER\ControlPanel\JogBar\Settings\

There's a key there called EnableRingVolumeMute

If there isn't, try creating it and setting it to 1.

[vince88]

ok, I probably didnt specify this, but I got the phone 3 days ago. Im really new to this whole modding thing...
I looked every where in the phone for that HKEY thing and couldnt find it...
Now I'm guessing I need some kind of software to play with the registry right?

If yes, which one do I need and where do I get it...

Thanks a million for your help

[jonnala]

ok, I probably didnt specify this, but I got the phone 3 days ago. Im really new to this whole modding thing...
I looked every where in the phone for that HKEY thing and couldnt find it...
Now I'm guessing I need some kind of software to play with the registry right?

If yes, which one do I need and where do I get it...

Thanks a million for your help

Try phpregistry editor or total commander

[vince88]

okay, so I did it...
It was pretty simple, given how accurate your directions were, it only took about 30 seconds to do it all!!!! :-D

Thanks a lot every1... You guys are the best!
:p

[aregaily]

Thank you for your valuable information, it is working

[kc2607]

The version for the ARMV4I is the correct one. Try the installer at http://www.microsoft.com/downloads/details.aspx?FamilyID=0c1b0a88-59e2-4eba-a70e-4cd851c5fcc4&DisplayLang=en. That link will take you to the .NET CF 2 SP1 MSI file.

I downloaded NETCFSetupv2.MSI on my Dash and pressed Menu button on top of it using file explorer in my Dash (its on WM 5.0). I keep on getting message as 'there is no application associated with it' and it does nothing. Can you suggest how I can install this MSI file on my dash. Thanks!

[D1P53T]

does anyone know how to re-map the t-zones key so that i could make it go to my task manager??

[vince88]

Hey guys,
I find it pretty annoying that every time I take my phone in my hand, outlook turns on.
The Jogger button is a little problem with this phone, it should have had it's own button down there with the others...
Any suggestions as to disabling it?

thx.

[lubs]

I second this. I'm constantly opening up Outlook accidentally and I don't even use it. I believe I've seen regedits for the top and bottom 'buttons', but don't have the time to search for it right now.

[seu2002]

Hey guys,
I find it pretty annoying that every time I take my phone in my hand, outlook turns on.
The Jogger button is a little problem with this phone, it should have had it's own button down there with the others...
Any suggestions as to disabling it?

thx.

In WM6, u just goto HKCU\ControlPanel\JogBar\Settings\
clear BottomKeyApplication & BottomKeyAppParameter.

[nhlnut33]

Sweet Mother Of Jesus..that is my biggest Pet Peeve currently on my excaliber running htc wm6...I keep forgetting to post the solution to this one..I will give it a shot.

[nhlnut33]

I meant post the problem, wanting a solution to this:)

[vince88]

ok, so since it seems to b quite a problem and not only for me, let's try to kill 2 birds with one stone...
Can some1 post the regedits for WM5 and WM6?

[outphase]

The solution is the same, and it has already been posted.

[PhoenixAG]

Yes, the solution is the same and it works quite well. You can also use those parameters to set it to open any app u want.

[lubs]

Awesome. I also cleared the TopKey stuff, although it hasn't been nearly as annoying.

[aasifl]

hi everyone,
is there anyway that we can program the touch strip to use as a scroll bar or something.. it will be useful considering we could use it to scroll internet, word, excel or any other programs..
please letme know if this is possible & how ?
i am using dash with WMO6 currently.
thanks.
aasif

[stickman]

Well, mine scrolls :)

[shtits]

Well, mine scrolls :)

and mine too...:)

[wm1]

This program should allow you to scroll and set the buttons on the jog bar to work as intended.

[unknown123456]

Before you install SetJogBar (great program), make sure your phone is decertify. Also look around for DashConfig.exe which also works great with SetJogBar. It takes time getting use to and I would recommend if you use your Top/Bot buttons to open up programs that you set the setting to very fast so you don't accidently open it when you are listening to calls or whatever. With very fast sensitivity, it's like using your finger to double click on your mouse. As for the scrolling, I think we all know it's ups and downs on how reliable it really is. And for future references, please search before asking. I knew about SetJogBar before I even bought the phone by a simple google search. This was once of the VERY FIRST issues that many people wanted to know when they got their Dash and there's numerous threads and videos about it.

[mofoliar]

If you are using the new HTC Rom it gives you the option.. If your phone is CID unlocked.. under setting, more more, jogger, to choose scroll or volume option.. I like that feature for sure, they should have done that from the get go.... the tmobile rom didnt, you had to edit the reg to do it.. good luck..

[aasifl]

thanks guys specially WM1.. got my scroll working..
thanks again

[bookat]

could you pls tell me where you got the software from? phpregistry or total commander?
thx

[bookat]

i got the program. it wasn't that easy for me to install it and the plugins. but now i m good to go.
i found the location
windows->jogger.xml
i don't have the EnableRingVolumeMute key so could you pls tell me how to create it
thx

[poppa_john]

Any way I can change the Outlook JOGGR Shortcut (double-tap on bottom of the JOGGR)? I am using the latest HTC ROM with WM6 if that makes a difference...

[montai_hotmail]

You can change the below registry.

Registry Jogbar
\HKCU\ControlPanel\JogBar\Settings
- BottomKeyApplicationName
value = \Windows\tmail.exe
- BottomKeyAppParameter
value = -service "ActiveSync"

[poppa_john]

I found this in a different post in an unrelated matter...

I also found a way to change Jogbar button from mail to any.
Registry Jogbar
\HKCU\ControlPanel\JogBar\Settings
- BottomKeyApplicationName
value = \Windows\tmail.exe
- BottomKeyAppParameter
value = -service "ActiveSync"
You can change from tmail.exe to any or blank.

Thanks montai!

[max620]

Hi,

Before I updated my phone to WM 6 when someone called and I didn't wanted to pick up I could just touch the jogger and it would silance the ringer.

Now with WM6 it doesn't working. Is there some other way to do it?

I don't want to press "ignore", because then the person will know that I didn't wanted to answer him.

Someone have solution for me?>

[lubs]

Double tap the joggr. This has been answered many times.

[.PoNeH]

I don't know if anyone else can relate, but I find myself constantly hitting the lower portion of the JOGGR and accidentally opening Outlook E-mail. I would rather not disable JOGGR since I use it a lot to mute incoming calls. Is there a way that I can just disable the Outlook shortcut portion of the JOGGR to make it not do anything?

Thanks...

[angelgolp]

Try the file attached:
Then run it even if it says that your phone isn't a Dash.
Then for "Bottom Key App" leave blank
And for "Bottom Key Param" leave blank too.
And to finish save it.

[montai_hotmail]

You can edit the registry below. Remove \windows\tmail.exe.

Registry Jogbar
\HKCU\ControlPanel\JogBar\Settings
- BottomKeyApplicationName
value = \Windows\tmail.exe
- BottomKeyAppParameter
value = -service "ActiveSync"

[timothyjok]

can you replace it with another program like messages

[.PoNeH]

Thanks a lot for the help guys. The .CAB file worked perfectly.

[tizana]

excelent A+ the program set job bar work very well!!

[.PoNeH]

Now let me ask you guys. Is there a way to leave the Scroll function working, while preventing it from manipulating the Volume when in the middle of call. My cheeks are constantly altering the volume and it's getting quite annoying.

If not, is there a way to disable all the JOGGR's functions (including scroll and volume functions) except the "silence ringer" function?

Thanks in advance...

[hernlui]

Worked great with the new WM6 HTC ROM.
Thanks!

L.

[djnutz]

I searched but couldn't find how to set Joggr to scroll by line instead of page when scrolling in sms or e-mails. With SK Tools I changed the scrolling by d-pad for word and notes from page to line; however, can't find the setting to apply that to sms/e-mails. It changed after I did a hard reset last night.

Any thoughts would be appreciated.

[gottifour]

I have upgraded to the htc rom and it runs great...I cant seem to find the registry hacks to remove the jogger icon and the large edge icon at the top of the screen..Does anyone remember hoe to do that? Thanks in advance...d

[jhwo99]

I have upgraded to the htc rom and it runs great...I cant seem to find the registry hacks to remove the jogger icon and the large edge icon at the top of the screen..Does anyone remember hoe to do that? Thanks in advance...d

HCU-controlpanel-jogbar-settings- values -enablejogbaricon- set value date to :0

reset phone and this icon is gone.

I don't know how to remove the other..

good luck.

[jhwo99]

I have upgraded to the htc rom and it runs great...I cant seem to find the registry hacks to remove the jogger icon and the large edge icon at the top of the screen..Does anyone remember hoe to do that? Thanks in advance...d

Go to: HCU-controlpanel-jogbar-settings- push values- enablejogbaricon- set value date to 0.

reset phone and this icon is gone.

I don't now how to change the other.

good luck.

[gottifour]

Thanks jhwo99...That worked great...

[corrado85]

now which registry program do yall use for this? thanks

[gottifour]

I used PHM Registry Editor directly from the phone...

[corrado85]

thanks!

ok so now how we remove the edge :)>?

[NRGZ28]

Good "ceregeditor" download it and use it. It edits the phone's registry, from your desktop computer. No fiddling with the phone to edit the registry anymore :)

[gottifour]

Good "ceregeditor" download it and use it. It edits the phone's registry, from your desktop computer. No fiddling with the phone to edit the registry anymore :)

Thanks for the link....It's a lot easier to see things on my monitor...:)

[gr33k]

Here is something I found that breaksoft makes. It is freeware BUT you need MS .NET framework for this to work.

Mobile Registry Editor

[gottifour]

thanks!

ok so now how we remove the edge :)>?


I wish we knew...

[NRGZ28]

It's probably part of some DLL, just like it is on a PPC. Maybe someone can dig around and find it...

[phodo]

This may be common knowledge, but it is new to me. I am outside of T-mobile's coverage area today, and I see that the large E changes to a small E with a triangle, which I think means that I am roaming. If I recall, in WM5, the triangle was a large icon all by itself on the status bar. I have attached a screen shot. I wonder if anyone has compiled a legend of all the icons and their meanings.

[gottifour]

This may be common knowledge, but it is new to me. I am outside of T-mobile's coverage area today, and I see that the large E changes to a small E with a triangle, which I think means that I am roaming. If I recall, in WM5, the triangle was a large icon all by itself on the status bar. I have attached a screen shot. I wonder if anyone has compiled a legend of all the icons and their meanings.


Thats weird..Ive never seen that icon before.....

[AlexXF]

What mean this option in JOGGR settings?
Is there key unlock based on JOGGR (like on iPhone)?

[estranged_inc]

If the phone is locked, the JOGGR is disabled.

Has anyone managed to figure out how to silence an incoming call if the phone is locked?

[nicematt]

What if the JOGGR is disabled by choice?
My JOGGR is disabled because it usually is more of a hassle when it's in my pocket than it's worth.

Is it possible to remap a key to do this? Or a program that would do it?

[AlexXF]

Is there any other way to silence ringer without JOGGR using?

[SpringfieldXD45C]

Works fine on the Dash WM6.1 Kavana ;)

[basic914]

under the * HKCU\ControlPanel\JogBar\Settings\BottomKeyApplica tionName = \Windows\iexplore.exe

can anyone tell me the value date:

I changed that by mistake thanks :(

[Reeg]

Why does LowLight never run when I click the JOGGR Bar 3 times? I have it enabled and it never works unless I check the box for LowLight and click done. Then it will run. But if I lock the phone and unlock it, LowLight turns off and it's bright again, but it still shows the process in Tasks.

Any ideas?

[Profezza]

Because it is a bad app. It needs rebuilding from scratch. Sorry.

[Reeg]

Is there regedit or a hack that can make lowlight run all the time? i hate how bright the screen is.

[Profezza]

Lowlight overrides the screen-off functionality. So, when it runs all the time, it runs ALL the time! :(

[uccellino]

Lowlight overrides the screen-off functionality. So, when it runs all the time, it runs ALL the time! :(


Actually there are some registry changes that make it run permanently dim. The only problem I have is, after making the change, the display goes white (instead of turning off) after I unlock it... so I never lock it. If you're interested, I can tell you what I changed and you can play around too ;)

[yipcanjo]

Reeg --

What is the "NRG's Sliding Panels Fav's" that you reference in your signature? Is it anything like we're discussing on this thread?

http://forum.xda-developers.com/showthread.php?t=384000

Thx. Yip

[Reeg]

Reeg --

What is the "NRG's Sliding Panels Fav's" that you reference in your signature? Is it anything like we're discussing on this thread?

http://forum.xda-developers.com/showthread.php?t=384000

Thx. Yip

It's something NRG wrote to add a panel to WM6.1 for your favorite programs so you don't have to go to START all the time.

[Mikey1022]

I use BL toggler...i love it.
If you decide to use it...remember to run the default.exe in BL Toggler folder first.
Why? Cause it needs to know what the default settings are so when you toggle the program on/off it will actually keep the back light on or off.

It's great for when surfing the net or watching a movie....it will keep the back light on instead of dimming or turning of if you dont hit a key on the pad.

Back Light Toggler (http://www.mediafire.com/?wmjxdzuuo9b)

[Profezza]

If you're interested, I can tell you what I changed and you can play around too ;)

Been there did that. No thanks.

[uccellino]

Been there did that. No thanks.

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State

That's the base key - but yeah, a word of warning: you may have to hard reset your phone if you put crazy values in here. What I found worked, was copying the "bkl1:" value from the profile BacklightOff to On... I just can't lock my phone.

[-RotorDemon-]

I am running rickwyatt's v16 Kavana 080408. I disabled the JOGGR in the settings and it will re-enable itself randomly. The box is still unchecked. I will have to enable then disable it again to shut it off until it turns back on.

Does anyone have a permanent fix for this?

Thanks

[Rip Syntaxx]

I am running rickwyatt's v16 Kavana 080408. I disabled the JOGGR in the settings and it will re-enable itself randomly. The box is still unchecked. I will have to enable then disable it again to shut it off until it turns back on.

Does anyone have a permanent fix for this?

Thanks

After you disable the JOGGR, do you reboot? Sometimes rebooting is just the ticket... If that doesn't work, you may want to tweak the registry settings.

[JL.Medina]

Anyone know how to change the touch strip sound? I have ringtones and different sounds installed, like, AOL "You've Got Mail" sound everytime I get an email. But, I can't figure out for the life of me how to change the touch strip sound. Please help! I really want this to work. :D

[-RotorDemon-]

Still no dice. I'll do some searching through the registry so I can permanently disable the JOGGR. If someone knows right where to look and what to change I would appreciate the assistance.

I hate the darn thing. Phone rings, stick my hand in my pocket, JOGGR rubs on my hand or pocket and ignores the call. Getting a bit annoyed LOL...

Thanks in advance.

[Mikey1022]

Isn't one of the options for the Jogg to use it as a volume strip only? Incall volume i think is one option.

[Profezza]

How 'bout an option to not let bumping joggr screw up the volume, but still scroll? :D

[outerdepth]

In your Windows folder on your phone, there is a section of pics that say Click two and Click One Lower Down Scroll and Goutte Lower down Scroll. There are other pictures called Jogger Volume and popcork lower down that you might want to play with as well. Just make whatever sound you want to replace these with and change the name to the one you want to replace. Drop the new file into the Windows directory and that should do it.

[Rip Syntaxx]

Has anyone had any issues with their JOGGR strip malfunctioning with the Kavana 6.1 080408 ROM? I've already been using the ROM for about 4 weeks now with no problem. Now...my JOGGR strip won't scroll like it's supposed to. I've already double (and triple) checked my settings. Only when I reboot, will it work! Anyone ever had this issue???

[AbsoluteDesignz]

yea ive had it a few times....

[Rip Syntaxx]

yea ive had it a few times....

Okay... Any idea why this might occur?

[ryanh11]

Okay... Any idea why this might occur?
it's gotta be something in the rom because i didnt want mine on because of the volume accidently being turned down during a phone call...so i went into the settings and turned it off...it never turned off...so i went into the reg editor and turned it off that way...it then turned off, but only for a period of time and it started scrolling again and changing the volume...so its gotta be in the rom...other than that...props to you kavana! great rom

[megaxp]

:mad::eek:

same problems here guys... JoGGR seem to be untamable!!!!!

[JL.Medina]

Thanks! I'm gonna give it a try. Unfortunetely I just messed up the top part of my screen. So, I have to order a new phone.
Thanks again. I'll try it some time this week.

[Clydeistheshit]

Thanks! I'm gonna give it a try. Unfortunetely I just messed up the top part of my screen. So, I have to order a new phone.
Thanks again. I'll try it some time this week.

What do you mean by "just messed up the top part of your screen?" It may be fixable instead of ordering a new phone.

[skaroger867]

can you post that aol "you got mail" thing or point me in the right direction

[nlarge]

can you post that aol "you got mail" thing or point me in the right direction
\
http://www.ilovewavs.com/Events/GotMail/GotMail.htm

[ryanh11]

so how does one gong about putting one of these wavs on my phone? when i click to save target as...it tells me that it may be downloaded incorrectly

[nlarge]

look up wav to mp3 converter in google.... comvert to mp3 and good to go!

[skaroger867]

got a lot of great sounds from that site, thanks

[Mikey1022]

I wouldn't even convert them to mp3 if its a wav file. Just transfer them to your \application\sounds folder.

[nlarge]

I wouldn't even convert them to mp3 if its a wav file. Just transfer them to your \application\sounds folder.
what he said lol...... i havejust always been in habit of converting but you dont have to

[Mikey1022]

lol i dont convert wav files cause they are compressed, making them smaller in size. MP3 uncompresses the file and makes them larger. Since there are no vocals in a wav, useless space will be taken up. :p

[JL.Medina]

Here is the original link were I got it.
http://newmail.monsterserve.com/misc.htm

[ryanh11]

lol i dont convert wav files cause they are compressed, making them smaller in size. MP3 uncompresses the file and makes them larger. Since there are no vocals in a wav, useless space will be taken up. :p
problem is my phone says taht it is an unsupported wav file and it cannot be played can i fix that?

[nlarge]

problem is my phone says taht it is an unsupported wav file and it cannot be played can i fix that?

just convert to mp3 and no worries... unless someone else has a tweak to fix that.

[stylez]

Was going to post how do i delete post?
Sorry.

[sprime01]

is there a way to lock the sound aspect of the jogger while on the phone- i hate having to always put the volume back up because my face or hand causes it to make the volume low