Menneisyys
29th October 2006, 07:15 PM
Teksoft, developer of the excellent BlueMusic application (see for example this article & the links (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1304&more=1&c=1&tb=1&pb=1)), has just come out with a brand new suite, Smart Bar, of system management applications. I decided to give it a try as it’s a pretty capable suite of utilities with some really excellent modules.
http://www.winmobiletech.com/102006SmartBar/SmartBar10Main.bmp.png
They even promise (http://www.teksoftco.com/products/phonerec/index.php) an application capable of recording both (!) parties in a phone conversation (so far, this has been impossible (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=513&more=1&c=1&tb=1&pb=1) with all Pocket PC Phone Edition devices of both HTC and ASUSTeK (Fujitsu-Siemens T8x0 (http://www.ppc-welt.info/community/showthread.php?t=99055))); I think it’ll work by directly “tapping into” the Bluetooth unit as can be seen for example in here (http://teksoftco.com/forum/viewtopic.php?t=34).
Availability, price
The suite is available here (http://www.teksoftco.com/products/smartbar/index.php). To review the (pretty good and recommended) manual, visit this link (http://www.teksoftco.com/products/smartbar/help/help.html). There is a(n unfortunately, pretty restricted) trial version too.
The “price” of the suite is 200 credits; that is, between 20 and 25 euros (depending on the amount of money you transfer to your online credit account). The registration is a one-device only (that is, CPU ID- and not PPC owner name-based); licenses can be transferred to other devices in case of a device change (for example, when the previous one bites the dust and gets exchanged).
Install
Use smartbar_setup.exe for pre-WM5 and the CAB files for WM5; see install.en.txt for the latter case.
Compatibility
It’s stated to be compatible with strictly QVGA devices with at least the WM2003 operating system. (I’ve also tested it on Pocket PC 2002; it indeed doesn’t work.)
You can, of course, try to install it on VGA devices, but I don’t think you should give it a go. I’ve tested it on three different VGA devices (Dell Axim x51v A12, WM5 iPAQ hx4700 2.01, WM2003SE Pocket Loox 720). On the hx4700, the PowerPlugin Today screen plug-in was absolutely useless; on the two other devices, it was shown, but not anything else. On the Dell Axim x51v, I’ve received frequent gwes.exe crashes after a reboot, because of which I had to entirely disable PowerPlugin.
Of the PowerPlugin, few features were accessible on these VGA devices; in the following chart, I’ve summarized all this (note that it also contains HTC Wizard-related info):
http://www.winmobiletech.com/102006SmartBar/t1.png
Note that, as far as the Wizard is concerned, I’ve listed two ROM’s: the O2 2.21.4.1 WWE (3/9/0) ROM and the “cooked”, widely known AKU3.2 one by KTamas / bepe (http://forum.xda-developers.com/showthread.php?t=276799). This means there are differences between different ROM versions / builds – all icons may work with your particular ROM version. The developer has promised they would test the suite with other ROM versions.
As can clearly be seen, the majority of the features PowerPlugin has can’t be used - not even on the QVGA HTC Wizard (with some ROM versions).
One of the central features of the application, Smartbar, wasn’t accessible either on any of my VGA devices. Self-standing apps like the screen capture, the network troubleshooter and the task manager applications, however, did work on VGA devices.
Also, it’s very important that you BACKUP (see the Backup Bible (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1270&more=1&c=1&tb=1&pb=1) if you’re unsure) your device before installing the application. My absolutely clean, freshly hard reset WM2003 HP iPAQ 2210, after the install, couldn’t boot in at all and I ended up having to hard reset the PDA (I’ve tested this two times). I haven’t tried to boot into Safe Mode (read this roundup & tutorial (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1255&more=1&c=1&tb=1&pb=1) if interested in Safe Mode on the Pocket PC); it may have helped .
Today plug-in (PowerPlugin)
It’s a simple plug-in with shortcuts to en/disable wireless units, suspend the device, show whether it's connected to the Net (IMHO, this is pretty useless on a WM2003+ device - after all, the Connectivity icon is always visible on the taskbar) and a backlight slider. It doesn’t contain for example battery or memory meters, unlike most other Today launchers (please see this iLauncher review (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=561&more=1&c=1&tb=1&pb=1) and the links to earlier reviews to find out what a decent Today launcher should offer.)
Unfortunately, the majority of the functionality it’s supposed to offer didn’t work on my test devices. For example, as far as en/disabling wireless functionality is concerned, it was only on the x51v that it was able to both en- and disable Wi-Fi; on the Wizard, it was only able to enable it and on the PL720, wasn’t able to do anything. As far as Bluetooth is concerned, it didn’t work on any of my test devices in any direction. The backlight slider only worked on the PL720. (See the chart at the top, in the Compatibility section for more info.) The only exception is the HTC Wizard with the O2 ROM, where everything worked. (Again, more information on the compliance with other HTC Wizard ROM versions will be published / announced later.)
Also note that, while it has, in addition to the backlight slider, a backlight icon. It, now, doesn’t do anything. Hope the Teksoft folks wire it to the backlight / brightness applet of the device as is the case with all the other, similar Today plug-ins.
Task manager
This is one of the best features of the suite.
http://www.winmobiletech.com/102006SmartBar/SmartBar10TaskManager.bmp.png
Pretty cool. Better than the built-in task manager: it lists the memory used, whether it’s a windowed app/process and if yes, is it visible; the title and the window class name (http://www.winmobiletech.com/102006SmartBar/SmartBar10TMTitle.bmp.png). However, it doesn’t display other advanced & useful stuff like CPU usage and has no “Stop all processes”. Also, it’s not possible to “hide” system processes either – that is, for a newbie, this task manager can prove pretty dangerous.
Ultra Keyboard
This is probably the most unique feature of this suite: it allows for controlling some functionality using the keyboard. The most important of this is text insert macroing capabilities, which has always been missing from Pocket PC’s (except for some, not very capable Software Input Panels (SIP's) like Resco Keyboard Pro (http://www.resco.net/pocketpc/keyboard/default.asp) and Biomobility’s CopyText Pro (http://www.biomobility.com/copytextpro.htm); also see this thread (http://pocketpcmag.com/forum/topic.asp?TOPIC_ID=20542) for more info if interested).
When you use text insert macroing and assign a macro to, say, the series of characters “bye”, Smart Bar will constantly monitor the keys you press on the built-in (or external) keyboard of your PDA and when it sees the keys b, y and e pressed in order, it’ll delete back the three characters and insert the replacement text.
http://www.winmobiletech.com/102006SmartBar/SmartBar10Ukeyb.bmp.png
It's really cool but, unfortunately, only works with built-in keyboards or external ones (like those of desktop-based PDA controllers; see this roundup (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=514&more=1&c=1&tb=1&pb=1) for more information on them.) Even in this case it can prove useful - most built-in thumb boards are pretty awkward to enter text on them.
You can initiate the following functionality from the keyboard: Replace with phrase; Execute a file; Turn device off; Reset device; Call number and Screen Capture. Note that if your keyboard has a different layout than your current ROM language, the default layout will be used. For example, if you have a German MDA Vario (= HTC Wizard) with English ROM but use the keyboard in German mode so that you find all keys at once, you will need to enter ‘bze’ instead of ‘bye’ for the ‘bye’ script to be executed. Also, note that not even in this case will everything execute – that is, try not to use anything that have relocated letters.
In my tests, all these functions worked OK.
Smartbar
This is a shortcut bar at the bottom of the Today screen for accessing active apps (closing / activating them) and activating other built-in apps (and the Desktop mode) of the Smart Bar suite. Unfortunately, task control-wise, it is probably the worst module in the entire suite; hope this will be greatly enhanced in subsequent releases.
http://www.winmobiletech.com/102006SmartBar/SmartBar10Main.bmp.png
They even promise (http://www.teksoftco.com/products/phonerec/index.php) an application capable of recording both (!) parties in a phone conversation (so far, this has been impossible (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=513&more=1&c=1&tb=1&pb=1) with all Pocket PC Phone Edition devices of both HTC and ASUSTeK (Fujitsu-Siemens T8x0 (http://www.ppc-welt.info/community/showthread.php?t=99055))); I think it’ll work by directly “tapping into” the Bluetooth unit as can be seen for example in here (http://teksoftco.com/forum/viewtopic.php?t=34).
Availability, price
The suite is available here (http://www.teksoftco.com/products/smartbar/index.php). To review the (pretty good and recommended) manual, visit this link (http://www.teksoftco.com/products/smartbar/help/help.html). There is a(n unfortunately, pretty restricted) trial version too.
The “price” of the suite is 200 credits; that is, between 20 and 25 euros (depending on the amount of money you transfer to your online credit account). The registration is a one-device only (that is, CPU ID- and not PPC owner name-based); licenses can be transferred to other devices in case of a device change (for example, when the previous one bites the dust and gets exchanged).
Install
Use smartbar_setup.exe for pre-WM5 and the CAB files for WM5; see install.en.txt for the latter case.
Compatibility
It’s stated to be compatible with strictly QVGA devices with at least the WM2003 operating system. (I’ve also tested it on Pocket PC 2002; it indeed doesn’t work.)
You can, of course, try to install it on VGA devices, but I don’t think you should give it a go. I’ve tested it on three different VGA devices (Dell Axim x51v A12, WM5 iPAQ hx4700 2.01, WM2003SE Pocket Loox 720). On the hx4700, the PowerPlugin Today screen plug-in was absolutely useless; on the two other devices, it was shown, but not anything else. On the Dell Axim x51v, I’ve received frequent gwes.exe crashes after a reboot, because of which I had to entirely disable PowerPlugin.
Of the PowerPlugin, few features were accessible on these VGA devices; in the following chart, I’ve summarized all this (note that it also contains HTC Wizard-related info):
http://www.winmobiletech.com/102006SmartBar/t1.png
Note that, as far as the Wizard is concerned, I’ve listed two ROM’s: the O2 2.21.4.1 WWE (3/9/0) ROM and the “cooked”, widely known AKU3.2 one by KTamas / bepe (http://forum.xda-developers.com/showthread.php?t=276799). This means there are differences between different ROM versions / builds – all icons may work with your particular ROM version. The developer has promised they would test the suite with other ROM versions.
As can clearly be seen, the majority of the features PowerPlugin has can’t be used - not even on the QVGA HTC Wizard (with some ROM versions).
One of the central features of the application, Smartbar, wasn’t accessible either on any of my VGA devices. Self-standing apps like the screen capture, the network troubleshooter and the task manager applications, however, did work on VGA devices.
Also, it’s very important that you BACKUP (see the Backup Bible (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1270&more=1&c=1&tb=1&pb=1) if you’re unsure) your device before installing the application. My absolutely clean, freshly hard reset WM2003 HP iPAQ 2210, after the install, couldn’t boot in at all and I ended up having to hard reset the PDA (I’ve tested this two times). I haven’t tried to boot into Safe Mode (read this roundup & tutorial (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1255&more=1&c=1&tb=1&pb=1) if interested in Safe Mode on the Pocket PC); it may have helped .
Today plug-in (PowerPlugin)
It’s a simple plug-in with shortcuts to en/disable wireless units, suspend the device, show whether it's connected to the Net (IMHO, this is pretty useless on a WM2003+ device - after all, the Connectivity icon is always visible on the taskbar) and a backlight slider. It doesn’t contain for example battery or memory meters, unlike most other Today launchers (please see this iLauncher review (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=561&more=1&c=1&tb=1&pb=1) and the links to earlier reviews to find out what a decent Today launcher should offer.)
Unfortunately, the majority of the functionality it’s supposed to offer didn’t work on my test devices. For example, as far as en/disabling wireless functionality is concerned, it was only on the x51v that it was able to both en- and disable Wi-Fi; on the Wizard, it was only able to enable it and on the PL720, wasn’t able to do anything. As far as Bluetooth is concerned, it didn’t work on any of my test devices in any direction. The backlight slider only worked on the PL720. (See the chart at the top, in the Compatibility section for more info.) The only exception is the HTC Wizard with the O2 ROM, where everything worked. (Again, more information on the compliance with other HTC Wizard ROM versions will be published / announced later.)
Also note that, while it has, in addition to the backlight slider, a backlight icon. It, now, doesn’t do anything. Hope the Teksoft folks wire it to the backlight / brightness applet of the device as is the case with all the other, similar Today plug-ins.
Task manager
This is one of the best features of the suite.
http://www.winmobiletech.com/102006SmartBar/SmartBar10TaskManager.bmp.png
Pretty cool. Better than the built-in task manager: it lists the memory used, whether it’s a windowed app/process and if yes, is it visible; the title and the window class name (http://www.winmobiletech.com/102006SmartBar/SmartBar10TMTitle.bmp.png). However, it doesn’t display other advanced & useful stuff like CPU usage and has no “Stop all processes”. Also, it’s not possible to “hide” system processes either – that is, for a newbie, this task manager can prove pretty dangerous.
Ultra Keyboard
This is probably the most unique feature of this suite: it allows for controlling some functionality using the keyboard. The most important of this is text insert macroing capabilities, which has always been missing from Pocket PC’s (except for some, not very capable Software Input Panels (SIP's) like Resco Keyboard Pro (http://www.resco.net/pocketpc/keyboard/default.asp) and Biomobility’s CopyText Pro (http://www.biomobility.com/copytextpro.htm); also see this thread (http://pocketpcmag.com/forum/topic.asp?TOPIC_ID=20542) for more info if interested).
When you use text insert macroing and assign a macro to, say, the series of characters “bye”, Smart Bar will constantly monitor the keys you press on the built-in (or external) keyboard of your PDA and when it sees the keys b, y and e pressed in order, it’ll delete back the three characters and insert the replacement text.
http://www.winmobiletech.com/102006SmartBar/SmartBar10Ukeyb.bmp.png
It's really cool but, unfortunately, only works with built-in keyboards or external ones (like those of desktop-based PDA controllers; see this roundup (http://www.pocketpcmag.com/blogs/index.php?blog=3&p=514&more=1&c=1&tb=1&pb=1) for more information on them.) Even in this case it can prove useful - most built-in thumb boards are pretty awkward to enter text on them.
You can initiate the following functionality from the keyboard: Replace with phrase; Execute a file; Turn device off; Reset device; Call number and Screen Capture. Note that if your keyboard has a different layout than your current ROM language, the default layout will be used. For example, if you have a German MDA Vario (= HTC Wizard) with English ROM but use the keyboard in German mode so that you find all keys at once, you will need to enter ‘bze’ instead of ‘bye’ for the ‘bye’ script to be executed. Also, note that not even in this case will everything execute – that is, try not to use anything that have relocated letters.
In my tests, all these functions worked OK.
Smartbar
This is a shortcut bar at the bottom of the Today screen for accessing active apps (closing / activating them) and activating other built-in apps (and the Desktop mode) of the Smart Bar suite. Unfortunately, task control-wise, it is probably the worst module in the entire suite; hope this will be greatly enhanced in subsequent releases.