Reset Simlock Count on Hw6515

[etellier]

Does it possible to reset the simlock counter try?:confused:
I've a problem with it : Simlock say i've tried 20 times to enter simlock code!
And now i can't valide new code : Ok button stay grey
This happened after i used vBar to kill Simlock task ! Number of try has reach 20 and now it seem to be lock for many days.:(

If someone can help me... Please cause now i've my simlock code but i can't valide if !:mad: :mad:

Ipaq Hw6515 French Bouygue telecom
Last ROM 1.23 French

vBar (great freeware but dangerous for simlock!) :
http://www.pocketpcfreewares.com/fr/index.php?soft=562

[pof]

Go into bootloader using mtty.exe, you need to access AT command interpreter, in some htc devices this is done by command 'rtask 7' on others is 'rtask b' (I don't know on the beetles). Should be something like this:


USB> rtask b <--- go into AT command interface
ate1 <--- type this to enable local echo
atv1 <--- type this to enable verbose output
AT@SIMLOCK=0,1,code <--- replace "code" with your MSL
AT@SIMLOCK=0,2,code
AT@SIMLOCK=0,4,code
AT@SIMLOCK=0,8,code
AT@SIMLOCK=0,16,code
AT@SIMLOCK=0,32,code
AT@simlock?40


If the last command returns simlock=00 means it's unlocked, other vaule means is still locked.
No need to reset the counter :)

[etellier]

Hi,
Thank for your reply but it doesn't work :

AT@SIMLOCK doesn't seem to be implemented :

USB>h rtask
Usage:

rtask [Type [Value]]
Type(hex) 0: Reset radio and [value](hex) is ignore.
Type(hex) 1: Turn on radio, lease use type 3 and 4 instead.
Type(hex) 2: Turn off radio and [value](hex) is ignore.
Type(hex) 3: Run radio image and [value](hex) is ignore.
Type(hex) 4: Run radio bootloader and [value](hex) is ignore.
Type(hex) 7: Radio AT Command Debug.
Type(hex) 8: GSM trace route.
Type(hex) 9: Run radio external bootloader and [value](hex) is ignore.
Type(hex) A: Radio image flash by external bootloader and [value](hex) is ignore.
Type(hex) C: Select debug path.
Type(hex) D: Radio AT Command with GSM trace route.
Type(hex) 10: Set radio external boot UART mode(fast(1)/normal(0)).
USB>rtask 7
Radio AT command debug.
Wait 177 ms

ATCmd Version 0.1

CAIF Init Done

ate1

0
atv1

aatv1

OK
at@simlock?40

aat@simlock?40

ERROR
AT@simlock?40

aAT@simlock?40

ERROR:confused:
AT@SIMLOCK?40

aAT@SIMLOCK?40

ERROR

ati

aati

Ericsson Mobile Platform:confused:

OK


And when i trie AT@SIMLOCK=0, facility(0 to 32), unlocking code => ERROR


I've tried with the first ROM 1.05 and the last 1.23, with the 1.23 the help for rtask disappear!

Does Someone know another methode or command to accomplish my unlocking action? Please I gonna be crazy, I've left my ipaq running simlock 7 days and Validation button stay grey!! I've reset to test at@simlock without success :(

[pof]

ouch, then hw6515 bootloader is different from what I've seen previously....

[azndude]

i have the same problems for months. my hw6515a 22 times. and i cannot have the button ok enabled. i cannot reset it. im still fresh on the boat. i downloaded the mtty.exe but i dont know how to use it. how to get my fone in the bootloader. Pof. you genius. plz show me how to unlock this fone. or reset the simlock count back. many thanks. Andrew. andrew@u-grab.com

[Khianto]

Go into bootloader using mtty.exe, you need to access AT command interpreter, in some htc devices this is done by command 'rtask 7' on others is 'rtask b' (I don't know on the beetles). Should be something like this:


USB> rtask b <--- go into AT command interface
ate1 <--- type this to enable local echo
atv1 <--- type this to enable verbose output
AT@SIMLOCK=0,1,code <--- replace "code" with your MSL
AT@SIMLOCK=0,2,code
AT@SIMLOCK=0,4,code
AT@SIMLOCK=0,8,code
AT@SIMLOCK=0,16,code
AT@SIMLOCK=0,32,code
AT@simlock?40


If the last command returns simlock=00 means it's unlocked, other vaule means is still locked.
No need to reset the counter :)

The bootloader are totally different, maybe the one that your are testing is on ipaq 6365...CMIIWW thanks

[NGOPHUSAI]

do HARD-RESET, that what i did to my H6515 USA version

[bcnboy]

Need a little help I am new with Ipaq 6515 but have unlocked other PDA and Pocket pcs, one thing how to put 6515 in bootmode and also how to hard reset it please can any one help.

thanks

bcnboy

[tramuyo]

need too to reset simlock counter.. this also can unlock beetles devices??

[ger77777]

Hi all. I have the hw6515 spanish, sim locked, and french, without sim lock. Iz it possible to make both english and unlock it???

[JC_BY]

How to reset unlock codes counter on HP 6515a?
How can I manage connection with mtty.exe and device. Because there is not any COM ports emulated by AS.

[lemming77]

Hi - this worked on the HTC Hermes (I have X01HT)

Before i started - AT@simlock?40 - returned - 01

I then ran AT@SIMLOCK=0,1,code (code= the code I bought off a member here)

Then AT@simlock?40 - returned - 00 (unlocked)

Thanks heaps

[Kevbodian]

Hi - this worked on the HTC Hermes (I have X01HT)

Before i started - AT@simlock?40 - returned - 01

I then ran AT@SIMLOCK=0,1,code (code= the code I bought off a member here)

Then AT@simlock?40 - returned - 00 (unlocked)

Thanks heaps

I think i need help with this. In mtty i get command error!!! all the time. Maybe I need to get the password? bootloader_pwn3d.pdf doesnt help.

I have my code, I just need to know how to input it. I have HardSPL installed maybe I will try flashing another rom to input the code?

[bolbol2005]

dear sir
HOW TO APPLY TO ELF & what is Msl that will be inserted instead of code

[luisyevelia]

The bootloader are totally different, maybe the one that your are testing is on ipaq 6365...CMIIWW thanks

DOES ANYONE KNOW HOW TO RESET COUNTS ON HERMES I TRIED LIKE THIS WITHOUT ANY RESULT
task 32
Level = 0

Cmd>28
Command error !!!

Cmd>task 32
Level = 0

Cmd>task 28
Storage format start

Write Nand Success

dwBlockToWrite = 13

Storage start block: 464

Storage Total block: 472

Total Bad Block in CE: 0

NeedToEraseBlockStart: 477

Storage format success


Cmd>task b

Cmd>task 7

Cmd>task b

Cmd>rtask b
Command error !!!

Cmd>rtask 7
Command error !!!

Cmd>task 7

Cmd>ate 1
Command error !!!

Cmd>ave 1
Command error !!!

Cmd>rask ave 1
Command error !!!

Cmd>task ave1

Cmd>task ate 1

Cmd>USB hrtask
Command error !!!

Cmd>hrtask
Command error !!!

Cmd>h rtask
Command error !!!

Cmd>task h rtask

Cmd>USB> rtask b
Command error !!!

Cmd>rtask b
Command error !!!

Cmd>rtask 7
Command error !!!

Cmd>'rtask b'
Command error !!!

Cmd>rtask 7'
Command error !!!

Cmd>AT@SIMLOCK=0,1,code <--- replace "code" with your MSL
AT@SIMLOCK=0,2,code
AT@SIMLOCK=0,4,code
AT@SIMLOCK=0,8,code
AT@SIMLOCK=0,16,code
AT@SIMLOCK=0,32,code
AT@simlock?40

Cmd>

Cmd>at@simlock=0,1,00000000
Command error !!!

Cmd>simlock=00
Command error !!!

NO USB JUST CMD BUT I READ IT WAS THE SAME THING.

THANK YOU ANYONE WHO KNOWS OR HOW TO DOWNGRADE SPL 1.4 OLIPRO TO 1.04 I HAVE SIM LOCKED 18 TIMES THX. AND I HAVE THE CODE.
AND ANYONBE KNOWS HOW MANY TIME I HAVE TO WAIT FOR OK BOTTON? OR IT CANT BE DONE