Jasjar with TomTom 6 and Holox 321 BT GPS

[Big G]

Hi All

I have the above setup and am having a nightmare trying to get the bluetooth GPS to work. I have tried every setting I can find and even upgraded the ROM to 1.90.96 to see if that helped but still no joy. Basically whichever COM port I assign 0,4,5 or 8 (the only options allowed) it shows up in the "Other Bluetooth GPS receiver" catergory in TT6 but it will not connect. I have also noticed that the only time the BT LED on the Holox device flashes is during the initial pairing with the jasjar, before the device default password "0000" is added. Once this function has been completed tthe light remains solid and tt6 does not recieve the gps signal.

I know the Holox unit and the TT6 is working fine as I have tried it on an old HP 1940 with wm2003 and it works perfectly.

Has anyone got any ideas, suggestions or experienced the same problems :confused:

[pug]

When you set up the Pairing with the GPS receiver use COM0 and select the serial port. Once this is done, set up a new outgoing COM port and make sure that the "Enable secure connection" box IS NOT checked. My Exec never works with any BT GPS receivers if this box is checked.
Then in Tomtom set use other BT GPS receiver and select COM0.

Pug.

[Big G]

Hi Pug
No joy I'm afraid. Have tried this more times than i care to mention but TT^ will not recognise the gps device.

[pug]

Sounds like a problem with your BT stack then. If it worked on your other device then it's obviously a problem with the Uni. Seen as this isn't a common problem, might be some problem with your setup. Thinking about it now, Tomtom overwrites some BT files during install, as you seem to be using an AKU3.2 ROM which will have updated BT stack, try deleting these from the windows folder.
ttn6bt2003.dll
BtCoreIf.dll
BtSdkCE30.dll

If it doesn't work, you can always re-install TT6

[mavrik64]

Hi All

I have the above setup and am having a nightmare trying to get the bluetooth GPS to work. I have tried every setting I can find and even upgraded the ROM to 1.90.96 to see if that helped but still no joy. Basically whichever COM port I assign 0,4,5 or 8 (the only options allowed) it shows up in the "Other Bluetooth GPS receiver" catergory in TT6 but it will not connect. I have also noticed that the only time the BT LED on the Holox device flashes is during the initial pairing with the jasjar, before the device default password "0000" is added. Once this function has been completed tthe light remains solid and tt6 does not recieve the gps signal.

I know the Holox unit and the TT6 is working fine as I have tried it on an old HP 1940 with wm2003 and it works perfectly.

Has anyone got any ideas, suggestions or experienced the same problems :confused:


Try reading here:http://forum.xda-developers.com/showthread.php?t=283253
That should sort it.

Mav

[Big G]

Hi All

I've tried all fixes for the above problem suggested by pug and mavrik64 earlier on this thread but without success. This is a little frustrating to say the least. The Jasjar has had clean install with nothing loaded other than the default programs included with the latest ROM build 1.90.96 from Jwrightmcps, the UK 'O2' setup and TomTom 6. As I know the software and Holox unit work fine on my old HP1940 running on wm2003, I'm convinced it is something in WM5 that is giving me the problem. I have read other forums were other people appear to have similar problems.

Please note; the main reason I flashed the ROM from that previously installed 1.30.76 was to try and find a fix for this problem. The older version gave me exactly the same problem.

Anyone got any ideas :(

[pug]

I am using Ivans Beta 15 and no problems, try flashing with that.

You have a new PM in a few moments as well.

[Big G]

PUG

Any idea where I can get hold of a copy of Ian's Beta 15 ROM. I've trawled round this site but can't seem to locate it

[mavrik64]

Hi All

I've tried all fixes for the above problem suggested by pug and mavrik64 earlier on this thread but without success. This is a little frustrating to say the least. The Jasjar has had clean install with nothing loaded other than the default programs included with the latest ROM build 1.90.96 from Jwrightmcps, the UK 'O2' setup and TomTom 6. As I know the software and Holox unit work fine on my old HP1940 running on wm2003, I'm convinced it is something in WM5 that is giving me the problem. I have read other forums were other people appear to have similar problems.

Please note; the main reason I flashed the ROM from that previously installed 1.30.76 was to try and find a fix for this problem. The older version gave me exactly the same problem.

Anyone got any ideas :(

Sorry to hear this didn't work. I am using JCs current rom with TT6 and Holux GPSlim 236 and it works like a charm.
Good luck

Mav