Big problem with Activesync by Bluetooth on JasJar

[Pozzame]

Hi,
I have already red more forum on this question.

I have e problem trying to connect to ActiveSync by bluetooth .

When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".

Therefore ActiveSync, on JJ, can't connect to my PC.

I have already configure ActiveSync on PC to connect on right Com port.

Please help me, i have lost some night to try it.

[alexatwocltd.com]

had same problem,you have to get rid of all phantom bt ports there is some stuff on windows support

[Pozzame]

Thanks for reply,
How can I remove phantom bt port?

[Pozzame]

Hi,
I have already red more forum on this question.

I have e problem trying to connect to ActiveSync by bluetooth .

When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".

Therefore ActiveSync, on JJ, can't connect to my PC.

I have already configure ActiveSync on PC to connect on right Com port.

Please help me, i have lost some night to try it.

Please, can someone help me?

[cktlcmd]

On my computer and Universal, I find it easy to setup BT Active Sync if I activate the setup on the Universal first using active sync app. There is an option within the active sync app to sync via BT. The computer will then recognize the device and will ask you if you want to pair it. On the other hand, if I try to pair them beginning with my computer to search for the Universal, after pairing and ticking all necessary boxes, it still won't sync.

After pairing and ticking all necessary boxes. Make sure you reset BOTH your computer and the Universal.

[Pozzame]

The problem is that when I pair my Universal to PC, not appear the service "ActiveSync", but "Serial Port".

I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.

But I've not obtained any result.

I don't know what to make.

Can someone help me?
Please.

[Pozzame]

Nobody has had my same problem?

Any idea, please?

[raad]

I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).

[joannaex]

Things I have learned:

- If UNI is connected via USB then AS service will not show in device pairing on PPC.
- You need to create an incoming COM port on PC and set AS to allow connections to this port.

[Pozzame]

I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).

I haven't change the bletooth stack.

Until some week it makes worked regularly, but an evening, I was configuring my Laptop to use the JJ like BT modem, when the AciveSync service has begun not to recognize more like such, but like “Serial Port”.

I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.

But I've not obtained any result.

Yesterday, I have tried the synchronization with an other PC with a fresh installation of windows, but the result has been the same one.
Therefore the problem is on JJ, even in the registry.

I don't know what to make.

Please, can someone help me?

[Pozzame]

Up
Please help me...

[leblan]

Don't know if this will help and I claim no credit because this solution was written in some other threads. For the universal with a Toshiba bluetooth on your PC:

first, pair your Universal with your PC, you get "serial"

On your PC, create the following "bluetooth local com" (Control panel)

- COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
- COM6 Toshiba BT Port (COM6) LocalCOM-Client

In your activesync, allow connection to COM7

Now comes the fun part. On your universal, go to your bluetooth settings, devices, edit your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync.

It worked for me.

Eric

[joannaex]

Also got to the control panel on PC and delete the bluetooth modem that was created. When u add a new incoming port on PC make sure it's not COM8 because that is used by JJ for USB modem connections.

[yannick]

I have the exact same problem on my Palm treo 750v. Searched the whole internet for a solution and found some other people with the same problem but no resolution. The only recommendation that seems to work is to do a hard-reset.

The problem started on my device after I played around with the Soft GPS port. It seems that it screwed up some COM port references for good...

[Asrar]

I had the same problem on my notebook with Toshiba's BT drivers. I uninstalled them and connected an external USB BT which fired up the MS default BT stack.

After I completed the pairing using Bluetooth Devices (in control panel) and clicking Add in the devices tab, I used the COM Ports tab and added an incoming port and copied the number of this com port in the AS connection settings.

Now, I initiated the AS over BT from the Jasjar and it said something like "it cannot find the service or whatever and would you like to create one". I clicked yes, when it took me to the list of paired devices. From here I did what leblan has also noted "your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync." I too found that the serial port changed to ActiveSync. The key, IMHO is to hit that "Refresh" button; i.e. once your device and PC are paired and connected, going to the BT devices and editing (press & hold)the device name (the notebook or PC in this case) you will get the services which will initially say serial port, but when you click refresh, it will change to AS.

[vdl]

both from PC and JJ :
delete eventually existing pair between them;

from PC:
if there isn't create a local service COM port. I created COM8 not protected, automatic start;

from PC activesync:
remove flag both for USB and other connections;

from JJ activesync:
try to connect, it ask for pairing, reply yes;
In "mode" flag on turn on bluetooth & make this device visible;
search for new devices, when PC has discovered complete the pairing;
after paired, you can see a serial port and other PC's services;
stay there;

from PC activesync:
now turn flag on other connections setting COM8;

from JJ:
refresh and You can see that serial port begin activesync;

tip OK for close all bluetooth setting windows, You are redirected in activesync.
enjoy start to sync

[duall]

15hours of crying and knocking the device. i've successfully fixed it...

i did this (credits to google)..


Delete all paired bluetooth devices from PC and from MOBILE.

CAUTION - USE IT AT YOUR OWN RISK <--- I used a registry editor for the mobile phone (google for regeditSTG2) and opened the Branch "HKLM\SOFTWARE\Microsoft\Bluetooth\ActiveSync" There might be a Key with a hex-String like this "0016cxxxxxx" --> delete it. Change the View to display the values in this Registry Branch, then delete the "LastConnected" Value and set the "Initialized" value to "0"

Turn bluetooth OFF>ON
Pair from PC
Confirm on DEVICE (dont need to select anything just enter code and press OK)
Go START->Active Sync->Connect via Bluetooth
Voilla worked for me..
hope this helps someone else