Jabra JX10 with Tytn?

[simonk12]

heard the jx10 has problems with ppcs. anyone tried it with a tytn?

[100thMonkey]

nope, TyTN is good with Ax2, PLantronics 510 and Jx-10..,I prefer the 510 though

[rzanology]

it works fine with my 8525....i also used it with my 8125 no problems.

[nutnbolt]

Interesting. I guess I need to pair this again. I thought I had some issue with it. It connects but no sound or anything.

[HHumbert]

Interesting. I guess I need to pair this again. I thought I had some issue with it. It connects but no sound or anything.

I have a JX10 from my old Treo650. Worked fine. I tried it on my new 8525 and no dice. Same symptoms. Connects, and I can hear the connection beep, pairing beep and even volume control beeps. But I don't get the actual audio from the connection. Nor does my connected party hear me trying to speak.

Nutbolt... any more luck? I've deleted and re-paired the JX10, but the same symptoms.

Thanks,
-Humbert

[nutnbolt]

I have a JX10 from my old Treo650. Worked fine. I tried it on my new 8525 and no dice. Same symptoms. Connects, and I can hear the connection beep, pairing beep and even volume control beeps. But I don't get the actual audio from the connection. Nor does my connected party hear me trying to speak.

Nutbolt... any more luck? I've deleted and re-paired the JX10, but the same symptoms.

Thanks,
-Humbert

Humbert:

It is working for me now. I actually called jabra about it and they got it working for me. You have to reset your Jabra jx10. They pair it again. Basically you need to clear all the settings.

[r111]

also note that the JX10 does not have a mute function, this was a deal breaker for me.

[slimsaturn]

I had a jx10 till this weekend but lost it...so now going with a blue ant x3 I have two phone is the main reason I am trying this headset

[guess88]

mine works ok with o2mini, 818pro and dopod 838pro

[HHumbert]

Humbert:

It is working for me now. I actually called jabra about it and they got it working for me. You have to reset your Jabra jx10. They pair it again. Basically you need to clear all the settings.

Interesting... that makes sense. Do you know the button/key combination necessary to reset the JX10? That would be very helpful for me, and I'll try it.

Thanks,
-Humbert

[fc959]

Anyone know how to reset the JX10 ?

Also there is a firmware upgrade available here
http://www.jabra.com/JabraCMS/EM/EN/Misc/Softwarejx10
but i can't manage to install it as you can't go into pairing mode while charging via usb...

[dwella]

I could sure use the reset code myself as I have the same no sound problem. Thanks

d

[slimsaturn]

Just spoke with Jabra. that upgrade was never meant to be released.

[debonairone]

The procedure to reset the Jabra JX10 is fairly straightforward (once you know) and only requires the headset (naturally) and the power cable that is attached to the charging cradle... This should be the AC adapter cable and not the usb charging cable (although, not sure if that would work or not)... Anyway, simply connect your headset directly to the charging cable for approx. 10 seconds and then disconnect it... Everything should be fine...

I still haven't been able to get sound with it and my TyTn, but it works fine with my Sony Ericsson W610... If any one knows of a way I can fix that, I would appreciate it... I have read several posts in the Wiki for it, but they haven't worked for me....

[xyzzyx]

Just spoke with Jabra. that upgrade was never meant to be released.

I have been having a lot of trouble with my jx10 as well. It works fine on my old SE T630 and on a nokia 6680, it used to work somewhat with the HTC Mteor I have, but after I paired it with a SE K610i, it just caused trouble.

I could answer the phone, hang up and trigger voice dialling with the button on the jx10 but I would the voice would stay in the mobile and never get transferred to the jx10.

It took me a bit of trial and fail to get the upgrade installed, but after that, for the first time, it actually works as is should with my Mteor. There is some hiss in it, which is annoying, but at least it works!

To get the upgrade installed, I had to:
1. Start the upgrade application before plugging in the USB cable in my PC. Let me repeat that! Before plugging the _cable into the PC_!
I have problems fully accepting this, but unplugging the jx10 from the cable and putting it in again never had the same effect. I actually had to pull the cable from the PC. Don't ask me why, its the kind of things that makes you believe red cars are faster than green ones.

2. I had to quit the program four times, pull the cable, start the program and insert the cable (with jx10) before it actually got upgraded.

First time, it installed some driver. After install, there was a warning from XP that one of my USB devices had stopped working normally.

Unplugging and restarting program and plug back in and the upgrade tool discovered my jx10 and started. It hang during initialization of communication before it got to download the new firmware

I then did the restart/replug thingy again. No luck, tried one more time and then finally it upgraded the darned thing.

800KB+ into that little thing in my ear. Feels heavier now that I know :)

[DAFTEK]

Same with me, i cant get it paired with the firmware update. I start the software then plug in the jx10 push power it blinks once blue, it go's into green then i push the pair button and it turns blue then blue and green but the software wont update it.

[xyzzyx]

Make sure you try what I experienced. Plug the cable into the PC after starting the software. That is, don't plug the cable into the PC first and then plug the other end to the JX10.

Something magic about this cable. I could never get the software to react if the cable was already in the PC and I just plugged it into the JX10 afterwards.

Always had to plug the cable itself into the PC after starting the software or nothing happened.

[DAFTEK]

Did you notice any improvements after the update?

[xyzzyx]

Yes, as I wrote earlier, my jx10 now works exactly as it should with my MTeor, for the first time.

[DAFTEK]

WARNING DO NOT ATTEMPT THIS WITHOUT A FULL CHARGE OR YOU WILL BRICK YOU JX10

I did not have a full charge and it bricked, so be warned, lucky my bud works at the store and got mine replaced under warranty :D after a full charge the upgrade went fine...

[khammo01]

Humbert:

It is working for me now. I actually called jabra about it and they got it working for me. You have to reset your Jabra jx10. They pair it again. Basically you need to clear all the settings.

How to reset the JX10?

[terminatordk]

can any body upload the update so i ca d/l it thanks