Update Rom Radio

[lchagas]

Hi, I have an hw6515 with a corrupted original Rom (0.92) and that it is imposible to upgrade via USB using the Huu rom upgrade application from HP. Then I´ve tried many things and discover that I can upgrade an entire image. I tried a hw6515c image, bigrom, Ipaqdisk from file farmer and everything works. Except my radio rom that is not recognized when I use the HP asset application.
So, how can I upgrade the original NBF files from HP not using activesync connection and not using HUU rom update utility from HP? How can I use the Romupdate utility (mtty) to update only Rom radio OS and Radio File system? Is there any command in DOS, Windows or Linux. How can I map the entire rom?

[londere]

this cant be done with a corrupted rom i think the only thing can you do is reboot the device in bootloader mode and try it

enjoy it!!!!
***nEuEzIeL***

[tk3w]

I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...

[londere]

I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...

Tell me how can you change your language ??(becouse i know this cant be done )
try it with th same language of your device

enjoy it
***nEuEzIeL***

[tk3w]

Yes, the change of language dont can be done.
but I did not know it and I have forced the flashing with an crakked program.
The flashing is go bad and now I have no image of old device.
The reflashing of the rom with upgrade of HP fail at %1 and the only way for to return at the old operative system is the restore the OS from the SD.
Please, can you share a backup of 6515d (english ) ?
Tank.

[londere]

no i dont have the 6515d i have the 6515b and your device are bricked you need to send to hp for a warranty or mailme to zerstoren_666@hotmail.com and the topic need 6515 im from mexico and you can send me your device if you want but your device are briked

[dim920]

I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.

I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..

The Rom dump via d2s : doesn't include the gsm parts

We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.

But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.

I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)


I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.

So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.

[londere]

I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.

I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..

The Rom dump via d2s : doesn't include the gsm parts

We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.

But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.

I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)


I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.

So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.


Is better Honestly buy a new Morher Card or a New Device SEll That in a Spare pices

[tk3w]

Hi, dim920.
I would be pleasing you of to receive material and informations about.
My email is tk3w@tele2.it but you can share your package of tools also
elsewhere on the web.

Tank

[dim920]

For download my package with :



- Radiodump (adress 60000000 800000)
- Special hpruu for incorrect device sku or other error messages
- Beetles Radio Patch
- Bigrom

- Ntrw to write to sd
- Romupdate & mtty
- usb monitor trial
- winhex trial
- Hx 4700 bootloader to modify the header

- At command guide


go here : http://dl.free.fr/TOErXwWr/package6515rom.rar



THE Bootloader PASSWORD level 0 is : "BOOTLOADER"
the level 1 (pass1) is 0000000000000000 (zero x 16)

I exclude all official Hp rom package,
my device is french and a 6515a.




For change Your phone language,
Download special rom & read here :

http://mobilitytoday.com/forum/showthread.php?t=12231


I post in few moments all an short description of what i do
,what i think and what are the solutions for the same problem
on other device.

[dim920]

I try to regroup all i have for tomorrow night if you want to
speak before and have msn :

dimitri_paris@msn.com

[tk3w]

Tank you for your share.
I am trying to flash the rom from sd card.
I have downloaded a rom image of 6515 and I must put it in the SD card.
After to backup the PDA over SD with romupdate.exe dowloaded from :
http://www.filefarmer.com/2/dmc8742
with d2s, I have put the card ( SD 512 MB ) into card reader and ran
ntrw ( hw6515_bigrom112.zip in the link above ) for write bigrom112.nb1
into SD, but something does not work!!! My SD is blank.
I have an image of rom : IPAQROM.img and I could also try to mount it on the SD but I know that I have to use IPAQDISK.
I have tried to find it for many days on the web but I have not found it!!!!
I think that the single way for to resolve the problem is to make the flash from the SD card.

Makes to know your news me.
The single way that we have to resolve the problem is to work together.

Excuse for my English

Hi.

[dim920]

- For the problem of Dead Radio, nos gsm, and asset info blank,
A Classic Rom dump doesn't take the radio Gsm part.

- Flashing Bigrom or RomDump of a working device can only help you
to have extended memory on External rom, or to change language.

- When you do d2s, Romupdate format the sd in a special format when writing your rom. After copy backuped rom to your pc and finish by copy the new Rom on Sd via Ntrw. Move the sd from pc to pda, Finish via hard reset (1/Power 2/joystick down 3/Reset stay 5 sec, you see bootloader lightly, unpress in good order
1/ Reset 2/ Others. You see bootloader HP v0.21.
After few seconds "press action buttons to flash"

It's normal that the sd is blank, because it's a special formatted via d2s
for the pda can boot so pda os & os pc ask you if you wat to format.
So you can't see the file writed by ntrw, but she is ready for flash, if you follow steps & the bootloader stuck in bootloader and don't propose to flash, it's a problem of rom compatibility.


- So the D2s command don't take the gsm part.
I think we have to specify the good adress range, it's why
the file radiorom in my package is a rom dump d2s 60000000 800000 of a working device. If i copy back on the working device, he says upgrade radio stack and ok so solution is not too far.

Try it but my device don't wan't to take back this rom, stucked on "calculate checksum" on the pda and nothing never happen. If i do checksum command it's ok, but if i do a checksum 60000000 800000 he stuck too on "cal checksum".

So i think we have to erase manually with erase command & wdata, but really not sure to not brick more the devices but it's how they can solve the problem on other device...

[shaker308]

How can I access bootloader menu on my hp ipaq hw 6515?

I tried all combinations POWER + Joystick + Camera + Reset

I only get a screen with message: Serial - hp - v0.21
This was because a ROM update went wrong...

Thx,
shaker308

[cluurk]

That screen you see with Serial -HP - v0.21 IS the bootloader screen. You need to then connect the ipaq to a computer and use a terminal software to access the bootloader menu

[shaker308]

ok... I didn't know that was the bootloader screen. I'll try what you told me.

Thanks cluurk.

shaker308

[shaker308]

Can anyone tell me where can I find iPAQDISK.exe.

If you can please send it to my e-mail.

jumpdf@aim.com

Thnx,
Shaker308

[anupvix]

Can anyone tell me where can I find iPAQDISK.exe.

If you can please send it to my e-mail.

jumpdf@aim.com

Thnx,
Shaker308

http://blogs.unbolt.net/media/blogs/brinley/iPAQDISK.zip

found it just now.. Trying to play around with a H6365.

[driversat]

hi,
please help restore my device(spanish movistar hp),
it doesn't recognize Radio GSM after upgrading to 1.29sp

Radio presente: Si
Version del firmware:
Version protocolo de la radio:
Version de Cargador de inicializacion:
Version del sistema de archivo de la Radio:
Version GDFS predefinida de la radio:
Numero IMEI:

anything i can do please?
i need radio rom file to restore from sd card