XDA IIs screen replacement instructions

[webtronix]

Hi guys, ok heres a problem i am left with , i have an XDA IIs with what i think is a cracked lcd ( bleeding badly ) i m sure the touch screen is ok as there is no crack as such - question i have is is it easy enough to replace the screen ?, and or where can i get instructions from - i have never dimantled a pda - but repaired many fones and other brown goods --cheers in advance

[bukwit]

this pdf helped me when I had to dismantle my BA...

Link broken

[webtronix]

this pdf helped me when I had to dismantle my BA...

ftp://xda:xda@ftp.xda-developers.com...el/sx66_09.pdf

please help - seems this is a dead link ...

[bukwit]

working link is in this thread...the 23rd post...

http://forum.xda-developers.com/showthread.php?t=230049&page=3

[cyberdrakula]

I have done it myself with my BA and it was quite easy.

[zybercynic]

this pdf helped me when I had to dismantle my BA...

ftp://xda:xda@ftp.xda-developers.com...el/sx66_09.pdf

Can anyone help - please.

[zybercynic]

Can anyone help - please.

http://pdasmart.zftp.com/instructions/sx66_09.pdf

For all of those who are performing case surgery - please note that the BA (M2000) has extra screws to remove before the case will separate.

You will need T5, T6 and an ultra fine Philips head screwdrivers to remove screws.

[Mustangman]

I have dismantled a XDA IIs, but am not sure how to get the LCD out of the front cover, there seems to be some plastic welds holding the front cover together?
Can any one assist please?

[BlueDragon747]

ok try to explain

1. take off battery

2. unscrew the four torx4/torx5 screws including the one under warning label but no need to touch the phone idenity label ;)

3. unscrew the two side screws located near top

4. take out pen and any card in device

5. carefully remove back (now you will be able to see the circuit board)

6. looking at the phone lcd down so you see the circuit board remove screws (small philips/ crossheads silver in color)
1.top left
2. top right
3. midle right near small cable

now you should be able to move the circuit board (do not force apart)

the lcd cable and keyboard cable are attached to the underside of the board

1. slide the phone 50% open (but keep phone lcd face down so you are look at the board phone the (keyboad being closest to you than main speaker))

2. carefully lift left side of board (you should see the cables) using a small screwdriver Very Carefully pry them off the board (the should pop off with no force needed)

3. slide phone fully open and now you are able to see all 4 torx screws that hold the front part of the phone on just under the circuit boad

* bottom 2 are in small cut out boxes just under to circuit board you may need to slide the front up or down to align with the screws

*the top 2 you should have notice when you fully opened the phone in normal use and looked at the back of the lcd at top behind speaker

4. the front surround and lcd and buttons will come off carefully remove from bottom near the navigation buttons

5. the phone should now be able to split into the two halfs with cables

6. you should be able to unscrew the the lcd and the cable 2 top 2 bottom for lcd but you have to also remove the button ribbon cable

replace lcd and reverse process

*the lcd cable needed to be pushed into the socket on the underside of the circuit board (this can be tricky take ur time)

*the keyboard cable is simular to the lcd cable but it has a smaller socket that it clips into

maybe this is a quick help I should have looked about a bit maybe someone done it better with pictures than me hey it only took 10mins :D

[webtronix]

ok try to explain

1. take off battery

2. unscrew the four torx4/torx5 screws including the one under warning label but no need to touch the phone idenity label ;)

3. unscrew the two side screws located near top

4. take out pen and any card in device

5. carefully remove back (now you will be able to see the circuit board)

6. looking at the phone lcd down so you see the circuit board remove screws (small philips/ crossheads silver in color)
1.top left
2. top right
3. midle right near small cable

now you should be able to move the circuit board (do not force apart)

the lcd cable and keyboard cable are attached to the underside of the board

1. slide the phone 50% open (but keep phone lcd face down so you are look at the board phone the (keyboad being closest to you than main speaker))

2. carefully lift left side of board (you should see the cables) using a small screwdriver Very Carefully pry them off the board (the should pop off with no force needed)

3. slide phone fully open and now you are able to see all 4 torx screws that hold the front part of the phone on just under the circuit boad

* bottom 2 are in small cut out boxes just under to circuit board you may need to slide the front up or down to align with the screws

*the top 2 you should have notice when you fully opened the phone in normal use and looked at the back of the lcd at top behind speaker

4. the front surround and lcd and buttons will come off carefully remove from bottom near the navigation buttons

5. the phone should now be able to split into the two halfs with cables

6. you should be able to unscrew the the lcd and the cable 2 top 2 bottom for lcd but you have to also remove the button ribbon cable

replace lcd and reverse process

*the lcd cable needed to be pushed into the socket on the underside of the circuit board (this can be tricky take ur time)

*the keyboard cable is simular to the lcd cable but it has a smaller socket that it clips into

maybe this is a quick help I should have looked about a bit maybe someone done it better with pictures than me hey it only took 10mins :D
these instructions i will cherish , cheers for the detailed breakdown...

[lancas]

I bought the BA with a broken touchscreen, the LCD is fine, I got a new touchscreen and disassemble it, I don't know how to do next, can anyone tell me how to seperate the LCD and touchscreen? and how to unplug and plug the touchscreen cable? Thank you very much!!

[eric429]

i have detailed instructions PDF with pictures.
drop me an email

[belize2004]

try www.htclcd.com for lcd replacement instructions

[mehmetali_vet]

could you send me that pdf file please (instructions PDF with pictures xdaIIs touch replacement)
thanks