PDA

View Full Version : How to use P3600 as HSDPA Modem


mobiler2
14th December 2006, 05:31 PM
I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.

I can:
- Activesync using USB
- Activesync using bluetooth

Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.

Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.

mobiler2
15th December 2006, 04:16 PM
Eventually, I figure it out myself.

Forget all the HTC modem dialer or wireless modem program as in Xda.

1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.

Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.

remixme
15th December 2006, 08:48 PM
Thanks very much for reporting this info back, it will come in useful when I get my trinity!

hlt
20th December 2006, 05:28 AM
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.

just 2¢...

Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.

SecureGSM
20th December 2006, 05:43 AM
for VPN purposes you can always use old good wireless modem mode. it works well.

mobiler2
20th December 2006, 04:39 PM
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.

Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!

Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.

Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE

shefful
17th July 2007, 04:20 PM
Hello,

This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.

Thanks!

adamwolfe
18th July 2007, 09:52 AM
Hello,

This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.

Thanks!

Hi shefful,:)

I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.

regards

Adam

adamwolfe
18th July 2007, 09:52 AM
Hello,

This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.

Thanks!

Hi shefful,:)

I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.

regards

Adam

shefful
18th July 2007, 11:27 AM
Hi adamwolfe,

Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs. :(

ayhansan
28th July 2007, 10:16 PM
Hi shefful,

Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.

Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?

Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.

shefful
31st July 2007, 09:34 AM
Hi ayhansan,

For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.

pisko
23rd October 2007, 11:46 AM
same problem here

i am connecting to laptop thru USB

after I disconnect UMTS phone syaing still connected

and want kill Internet Sharing

???

thanks

regards

sfaguy
3rd November 2007, 08:55 PM
Eventually, I figure it out myself.

Forget all the HTC modem dialer or wireless modem program as in Xda.

1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.

Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.

does this work with Mac as well?