missed upgrade

[sailors_be]

I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance

[rkwhyte2]

I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance

To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292

[kyphur]

When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.

Please state the following:

What Rom did you have prior to upgrading, include IPL/SPL numbers.

Do you know if your device is G3 or G4 flash chip?

Is your device CID Unlocked?

Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?

My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)

In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.

[sailors_be]

Thank you for you reaction

Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10

I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...

I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.

If tou need more info don't hesitate and thanks for helping.

[kyphur]

I'm going to give you some general info but you will have to do your own leg work to put this together.

The Wizard Wiki will contain some of the information you need:

http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard

Also see the stickied posts at the beginning of the Wizard upgrading forum.

I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).

First you will need to download an Operator Rom, I would suggest this one:

ftp://xda:xda@ftp.xda-developers.com/Wizard/Roms/Qtek/RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe

as it is an official Qtek AKU 1.x Rom.

Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.

At this point you are pretty close to where you were when you started.

Now, CID Unlock your Phone! Use this thread:

http://forum.xda-developers.com/showthread.php?t=249474

If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).

[Zzan]

Thank you for you reaction

Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10

I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...

I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.

If tou need more info don't hesitate and thanks for helping.

Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.

[sailors_be]

I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.

Merry christmas and happy new year

Jean-Michel