WM2005 install now XDA doesn't work

[jadegirl]

Hi

I installed wm2005 1.60c wwe and now my xda doesn't work. I have no phone, no calendar or contacts. camera & recorder buttons don't work and no gprs connection. I get an error saying cprog.exe isn't working.
Not sure what went wrong. Didn't fully understand the instructions being a brave newbie I went ahead regardless. Also didn't backup! (duh):mad:

These are the instructions I followed

Start your device in bootloader mode by pressing and holding down:

DPad + PowerButton + ResetButton

After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.

6. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.

Once your device is cradled, the text on the screen will change to "USB".


7. Run HimaUpgradeUt.exe

8. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.

9. Detach your device from the cradle.

10. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.

Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)

Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES

When done, press DPad and wait until OS starts.


At the end when I pressed the dpad nothing happened so I did a soft reset instead. Also at the beginning of the instructions it said this

Extract the decrypted versions of the nbf files
by entering the following commands at the command prompt:

xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306


2. Modify the operator ID in the nbfs to the value you require
by entering the following commands at the command prompt
substituting <operator> with the required value:

xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba


3. Update the crc values for each of the decrypted files
by entering the following commands at the command prompt:

xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba


4. Encrypt the files back into the nbf files by entering
the following commands at the command prompt:

xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306

which I didn't understand about the command prompt and ignored so thats probably why I have the problem. Can anyone help me with this?????

[Tabbe]

1.60?
why not try aku2 and abv
try getting tofclock 2.01 rom which i think is still the most stable rom and flash again

[pneuma]

Ignoring the command prompt stuff is fine and won't have messed up your device, it is simply to get the ROM to be in a language other than english, if you have trouble with putting an english ROM on your device (for instance if you own an Arabian handset you will have to do this part)

Did you format storage and wipe the registry? Did you get through the whole flash process properly? The instructions should have worked, but you should have been able to press DPAD after the wipe (dpad is the direction pad for up-down, left-right movement).

[xale]

Hi!

I've been having the same problem - along with the device no longer sync'ing with my pc. How do I wipe the storage and delete the registry entries?

Thanks,
Xale

[selangkahlagi]

R-cook the rom, and follow the instruction until the last step carefully

[xale]

Thanks for your help - could you be a little more specific? or link to where i can get r-cook and these instructions?

thanks,
Xale

[selangkahlagi]

Thanks for your help - could you be a little more specific? or link to where i can get r-cook and these instructions?

thanks,
Xale

Download c_shekhar rom, and cook the rom to try. There is instruction inside or in the first page..:)

http://forum.xda-developers.com/showthread.php?t=287941