PDA

View Full Version : Breeze Stuck In Bootloader Mode

ramram
30th December 2006, 07:27 PM
Hello,

While flashing the SP-JAS computer freezed on 15% of completion and now the device is stuck in BOOTLOADER MODE, I'm not able to flash it normally, I even tried the SD Method, and it hangs on Checking...


Here's the RUU log file.


20:06:19:875 [msg] : Version : [5.10 - 20060412].

20:06:22:937 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.

20:06:27:156 [msg] : Disconnect ActiveSync .... [2]

20:06:27:156 [msg] : Start Get Connect Port.

20:06:27:343 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.

20:08:47:984 [err] : BL Get Device Data Error.

20:08:47:984 [msg] : START UnInitialization !

20:08:48:500 [msg] : END UnInitialization !

Here are also some results from the MTTY

USB>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: B, Bootloader Version : 2.05
Built at: Jul 12 2006 15:32:49
Copyright (c) 1998-2006 High Tech Computer Corporation

CPU ID=0x41129200
Main CPLD version=0x8
Main Board version=0x4

USB>checkimage
IPL CRC checksum = 0x9352B5E9

SPL CRC checksum = 0x42F889A1

CE CRC checksum = 0x3197DD93

ExtROM is None.

Radio Image CRC checksum = <-- There's no result here and it freezes.

Help appreciated...
mingw
30th December 2006, 09:50 PM
Not sure if it will help but have you tried using the latest HTC ROM update ? I had a similar problem on my Dopod and eventually got it back with latest HTC ROM update.
ramram
30th December 2006, 11:35 PM
Well actually the latest HTC ROM was installed I wanted to revert back to the Imate rom, while the flashing procedure the computer freezed on 15%...

I'm not able to flash the device anymore, it's stuck in the bootloader....
NosekJ
16th January 2007, 06:40 PM
Please help me!
I have done upgrade MTeoR with rom RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR.
After the upgrade my qtec went shutdown and after this froze and have clear white screen.
I did try left+right soft key+power and selected restore to default factory, but the situation is same, phone don't working
I did try jog wheel+camera+power and ran upgrade, USB on PC detect phone as HTC device, but the ActiveSync don't find device and RUU program don't work and waiting to connect.
madwarlock
21st February 2007, 12:28 AM
I have the same problem! My PC freezed on 3% and now the device stuck in BOOTLOADER MODE! :eek: I tried to update after this, update fails! INVALID VENDOR ID:mad: I want to try SD METHOD, but i don't know where to find ROM in .nbf format:confused: Please Help...
kammiz
19th March 2007, 09:46 PM
i also have the same problem.. stuck in bootloader... even though i try installing the original rom it says invalid vender id.....

does nobody know what to do?
MrPhoni
20th March 2007, 03:53 PM
When you see "invalid vendor id" ignore this error and start ROMUpgradeUT.exe again without changing anything on your device.

Starting ROMUpgradeUT.exe two times often brings this to a solution.

HTH, MrPhoni
kammiz
23rd March 2007, 09:27 PM
When you see "invalid vendor id" ignore this error and start ROMUpgradeUT.exe again without changing anything on your device.

Starting ROMUpgradeUT.exe two times often brings this to a solution.

HTH, MrPhoni

didnt work for me....
eViL D:
23rd March 2007, 09:37 PM
Try to re-Flash with the same ROM currently installed or down/upgrade using the same vendor ROM.
kammiz
24th March 2007, 08:32 PM
Try to re-Flash with the same ROM currently installed or down/upgrade using the same vendor ROM.

didnt work for me..