Qtek S100 -> Crasy Bluetooth?

[filmoiletrucetfoumoilapai]

Hi,

With my S100, (ROMs 1.12...)the Bluetooth works only if the USB cable is connected and synchronized with computer!!!! If I don't connect it, the bluetooth radio works a few secondes then turn off! :mad: (Of course I have tried everything: softreset, hardreset, SHOUTreset...) but the radio bluetooth ever turn off after a few seconds...

And if I use Bluesoleil (+switch bluetooth, see ''stack post''...) it only works when connected with USB cable!!! If not, Bluesoleil doesn't work too!!! :(

My question is:

IS IT NORMAAAAAAL??? (bluetooth works only with usb cable)

If yes, the bluetooth on a PDA is completely stupid, isn't it?? :eek:
(IF I WANT A BLUETOOTH PDA, IT'S TO USE IT WITHOUT A CABLE!!)

Please Heeeeeeeeeeeelp!

[zerimar]

How old is your device? Have you considered that most probably your battery is already defective?

[filmoiletrucetfoumoilapai]

Thanks for your answer!

How old is your device? Have you considered that most probably your battery is already defective?

Well, no I bought it in december 2005...
I didn't notice any problem of battery when I use the qtek...

(How could I see if my battery is defective?)

:confused:

I noticed that sometimes Bluetooth works a few seconds before the GPRS connexion starts... the BT blinks, turns on & off... then stays on... then blinks again... then turns off !

Does the radio bluetooth use the same "channel" as the GPRS to work???

Thus, I have the impression that I must choose between telephoning and using the bluetooth… and moreover that the qtek must be connected with an usb cable to work! This is exasperating! :-(

[filmoiletrucetfoumoilapai]

PS : If I connect and synchronize my s100 with the usb cable, bluetooth (and bluesoleil too) works. A soon as I disconnect the cable, I loss the bluetooth radio after a few seconds... And the S100 (when I use Bluesoleil) say to me:

"Your Bluetooth device initialization fails! Do you want to configure it manually?"

So, it means that bluetooth need usb cable ant that is foolish!

:(

[zerimar]

I have BT on all the time and have no problems using TT and phoning at the same time. BT consumes a lot of power thus to check if the battery is the problem, fully charge your battery then start using BT. When the problem occurs check for the battery status.

[filmoiletrucetfoumoilapai]

Ok, thank you for this information (GPRS + BT together).
Regarding the battery, I have bought a new one on the web, I'm waiting for it... :cool:

[filmoiletrucetfoumoilapai]

Hi,

my Qtek S100 has always a problem: the bluetooth radio works fine when the S100 is connected with Usb Cable. But as soon as I disconnect the usb cable, the bluetooth icon blinks then become deactivated.

What could be the problem?

Thanks.

[zerimar]

If bt is on, the bt light blinks wether the device is connected (via usb or power charger) or not connected.

[filmoiletrucetfoumoilapai]

It's not the light but the icon

:confused:

[atLex]

I have similar problem with my T-Mobile MDA Compact!

1. I switch on Bluetooth. The blue light is blinking and bluetooth icon is blue.
I wait few seconds and click on the bluetooth icon.
But T-Mobile MDA Compact is freeze. I can't operate with device anymore.
(I can't press hard buttons, i can't use stylus, i don't have connection
to my bluetooth handsfree Motorola H3).

2. I connect my MDA Compact to PC with USB cable. I switch on Bluetooth.
Everithing is OK! I have bluetooth connection to my PC, to my Motorola H3!

P.S.
Bluetooth handsfree Motorola H3 is ok. I have tested it with other mobile phones and PC.