How do I fix my operator on my phone

[cobrabite]

I had my I-mate PDA2k with WM5_ArtZ_upgrade_WWE 1.7.1.3400_SD_ROM and it would not boot. So I found a fix on the forum using mtty 1.42. Know when I try to change my Rom back or change it to something else I get error 100: model id error 12-N-10-N-N. My operator should be T-Mob101, but when I get the data from the phone it says 0000A0000T%CID?.
Can I fix the opereator on the phone directly or can I get around this some how?

[bakasamaz]

I have exactly the same problem!!! but mine is SX66 Siemens phone

[imatrix]

I had my I-mate PDA2k with WM5_ArtZ_upgrade_WWE 1.7.1.3400_SD_ROM and it would not boot. So I found a fix on the forum using mtty 1.42. Know when I try to change my Rom back or change it to something else I get error 100: model id error 12-N-10-N-N. My operator should be T-Mob101, but when I get the data from the phone it says 0000A0000T%CID?.
Can I fix the opereator on the phone directly or can I get around this some how?

well i dont know how to fix this operator thing, but u can get around with by using MaUpgradeUt_noID tools.

if you are using helmi_c's rom, it's located under folder PH20B1. so just copy the rom file in there, set the oeprator as your T-Mob101 and flash.

u should also take out the SD card while flashing, just in case.