One more brick to the Cathedral

[pauloviegas]

This is my first Thread and unfortunately for the worst reason, that’s right … my WISA200 (Qtek 9100) is officially a brick.

For one week now that I’m surfing this forum looking for a solution. No success. :(

Long story short….

I’ve “see the light” with XDA and got so addict that I’ve started to make all the ROM’s I could get my hands on…last I got RUU_Molski.Biz_226102_22610105_022511_WWE-30MB (G3 Device. IPL/SPL like: 2.xx) and I was a very happy person, thanks to Molski.

The problem was that my enthusiasm did not stop and I made the big mistake …my own ROM.

My idea was quite simple, use the 3.0 Molski Rom thaking out the extended and that’s it, clean OS … I’ve tried sereval times and versions without any problem until one week ago...

I got the boot screen and never got read of it. The strange thing is that when previously the IPL and SPL were 2.26, now is IPL 2.26 and the SPL 2.18.0001.

I’ve already tried everything, without success …..

Downgrade:
http://forum.xda-developers.com/attachment.php?attachmentid=33177&stc=1&d=1168906645
Old Molski great job (how I miss it):
http://forum.xda-developers.com/attachment.php?attachmentid=33178&stc=1&d=1168906645
and even MiniSD image:
http://forum.xda-developers.com/attachment.php?attachmentid=33179&stc=1&d=1168906645

Nothing works …..

I’ve Google search (it always goes back here) and nothing……

Has any one got this boot screen before?

Thanks in advance even for those who just will read my post and … why not …laugh on me ….brick nerd….
Obrigado,
The Nerd

[AlanJC]

If it's getting as far as the boot screen, you should still be able to get into the bootloader (see wiki) and try a flash that way.

[pauloviegas]

Alan, thank you for your care and time reading my post.

Unfortunatelly I've spent my day using the different bootloaders tools and solutions and nothing works .... or I'm making the wrong procedure. I've even created (I think) a MiniSD SPL upgrade, but it did not work.

It seams the phone stops responding when I try to make any think.

MTTY without error, seams not to do anything although it connects to the phone ...

If anyone else has any ideas I would apriciate a lot.

Once more thanks Alan.

[pauloviegas]

I did not stop trying even though the bootloader did not work properlly, so still I insisted on inserting a rom, and I've tryed this one:

Qtek_9100_Telia_Danish_2.18.7.9245

Now it is on 98% I am really happy.

I'll keep you guys posted.
Nerd!

:D :D :D

[da_jojo]

now that u got that far.... go as alan points out to this thread with unlock advice and follow the procedure to get a good bootloader unlocked and all

[pauloviegas]

the process went all the way to the end but it came back again to the bootscreen rgb screen without any change still the IPL is 2.26 and the SPL 2.18.0001, does this mean my wizard is G4 and all the problems come from there? .....:confused:

I've made the format procedure, but still gives me FAT error.

Also I made a huge digging in the wiki and all posts to get in to the bootloader to change it or correct the SPL nothing has worked for me. Does any one has a SD image (any langue dont care!) which might solve me the problem?

Thanks a million.
Nerd ....
I promisse if I solve this I will never make a rom again!!!!

[pauloviegas]

The issue was a new motherboard ... yes... hardware failure.

As anyone expirenced similar issues?
Thanks to all support.

[vippie]

When you tried to flash to molski's rom it gave you an error 300 message. This message is usually displayed on a G4 device (you're SPL is a G4 SPL now). I think it could be flashed to you're device if you replace the "ROMUpdateUtility_Wizard_NoID.exe" with the one that works on G3 and G4 devices from this thread:

http://forum.xda-developers.com/showthread.php?t=291215

If this doesn't work, try flashing the wizard_love rom. It seems to flash to almost every device out there.

Good luck!