stuck on bootscreen (Serial v2. 08/USB v2. 08)

[secur]

Hi to all,

My device is stuck on bootscreen:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)

I' ve tried the solution:
-use Mitty, when stuck on bootscreen
(http://forum.xda-developers.com/showpost.php?p=934239&postcount=12)
but without success.
I See again:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)

Before of this I've used:
-xdadev_all_unlock-v1.5 (with success);

-after I've copied EnterBL.exe to my device and execute it for stupid purpose only
and now my device stuck as mentioned before.

I cannot connect it through ActiveSync 4.2 and simply stuck

I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.

I'm a newbie and really I don't know if this is a bl mode or something else.

Someone can help me Please?

Thanks


My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK

[Biohead]

Have you tried a soft reset?

[nstefanelli]

you just need to find a different ROM and flash it using the file i attached. you are also going to have the change the htcruu files to ruu files. all u have to do is a simple renaming. try that and ur phone should be back to normal again soon.

[secur]

:D
Hi and thanks to all,

the problem was the version of mtty.
the version 1.16 works fine
the 1,42 doesent

so now I've done the step
please look the attached image

and now my device work again

but without radio
on the screen on boot I read:
NO GSM
D 1.40 ETC ETC

[secur]

I don't know if I can however I post the link for all that need the newer version of mtty

http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=file,40,file=186

HAVE A LOT OF FUN!

[Yasso]

Hi All,
thanks a lot for the great help,

I Have I-mate PDA2k with WM2003SE
I have ROM ver. 1.40.00
I tried to reflash my PDA2k as I found that the sound is no longer work as well as the SD card is no longer been recognized by the OS
Now I am stuck on bootloader (Serial v2.06/USB v2.06) screen after unsuccessful flashing my PDA due to power failure in my home electricity

I used MTTY V1.42, set 14 0, task 28 and task 0 commands and successfully the OS worked again, then I found new ROMs for WM2005, So I used XDAIII Ext. ROM unlock tool, after that the machine started to HANG so I made a Hard reset then it return to hang on BOOT splash screen again
so I used mtty again to reprepare the Disk On Chip to return to a clean OS
all above three commands executed successfully and after soft reset the PDA2k stuck in the boot screen, I tried hard reset as well but with no hope
I tried to use MaUpgradeUt_noID.exe to reflash the Rom nothing happen, I tried to use another official roms from I-mate but nothing happen I stuck in the bad bootloader screen, I tried to use d2s command to make a backup of my ROM but when the command is executed the USB v2.06 message disappers from screen

after all this, is there anyone can help me with a new idea on how to fix it.
Thanks alot on advance.

[jbodaa]

I have the same problem, could you help me?

Hi to all,

My device is stuck on bootscreen:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)

I' ve tried the solution:
-use Mitty, when stuck on bootscreen
(http://forum.xda-developers.com/showpost.php?p=934239&postcount=12)
but without success.
I See again:
- Serial v2. 08 (outside of cradle)
- USB v2. 08 (inside cradle)

Before of this I've used:
-xdadev_all_unlock-v1.5 (with success);

-after I've copied EnterBL.exe to my device and execute it for stupid purpose only
and now my device stuck as mentioned before.

I cannot connect it through ActiveSync 4.2 and simply stuck

I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.

I'm a newbie and really I don't know if this is a bl mode or something else.

Someone can help me Please?

Thanks


My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK

[Juggles]

I've read a lot of thing and suggestion on this forum and I've tried various solution but the device stuck and I'm too.

I'm a newbie and really I don't know if this is a bl mode or something else.

Someone can help me Please?

Thanks


My device:
Vodafone VPX v1620
Model PH2OB2
Language:UK



OK i know you are new.. and maybe, just maybe a bit nervous because you have a device you cant use..

READ THE DAMN WIKI ALREADY!


There are so many ways to upgrade a rom, or extract it,

Let me give you a little hint.. Use that really bright shiny search button up there.. (ok so its not bright and shiny, but it is there!)

Press the down arrow, choose advanced search,

then type in what you need help with,

then make sure that the forum is BlueAngel (on the right!)

then hit search...


That will bring all the posts with the words that you looked for in the BlueAngle section of the forum.




Multiple posting is stoopid.. This is the 6th post i have seen from you regarding your device that you could have solved using your own head, and searching for the answer istead of sitting on your backside waiting for someone to post the link to solve all your problems.


I know this sounds harsh, and scarcastic, and a tad evil... EVERYTHING I HAVE LEARNED ABOUT A HTC DEVICE, I HAVE LEARNED FROM THIS SITE,

and reading the wiki, and google, and all kinds of other services...

there is no shame in asking for help.. just exhaust all other options first!





@ jbodaa

please read above and take note as well! :)

[gun]

1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe

3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.

4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button

7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute

9. on next line you will see:

HTCST ÚÈÒHTCEUSB>

10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:

DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot

13.press enter to execute the command

14. take the device out of the cradle, and manually reset it if it does not do that already.

good luck.

[majnoonintl]

:confused: hi 2 all.i i have i-mate_PDA2k ppc.
i downloaded i-mate_PDA2k_Arabic_13100_112_10600_SHIP to my pc and clicked on it and got stuck on boot screen USB v2. 07.i tried soft reset & hard reset i tried Romupdate v1.11a and mtty1.42 i tried every thing i would whan to bring it back to factory setting can some one help me.thanx a million thanx in advance
----------------------------------------------------------------------------

Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it:D