How do I check the CID status?

[yegor]

Is there a guide somewhere? Im really noob.

[Aero]

http://wiki.xda-developers.com/index.php?pagename=Trinity_BootLoader

[yegor]

Yah I tried this. I installed mtty, but I cant connect to the device. I tried connecting on COM1, it opens a black window, and just sits there. Cant type anything inside it. Yes I disabled the USB connection.

[ausdim]

Try this....

Scrroll down and set it as usb.

:D

[Aero]

Yah I tried this. I installed mtty, but I cant connect to the device. I tried connecting on COM1, it opens a black window, and just sits there. Cant type anything inside it. Yes I disabled the USB connection.

disable usb in activesync, then choose usb in mtty. The reason (so its a little bit clear) is that you disable usb in activesync so that it will not connect. You need the device to connect to the pc using mtty.

[yegor]

Ok, now Im getting a connection. In the terminal window, it says

CLIENTCLINETCLIENTCLIENT

I still cant enter commands.

[Azamat]

I wanted to find out my CID.
But when i enter the Boot-Loader (power-button + camera-button + Reset-button) I get this Red Green Blue White screen with the following text:
----------------------------
TRIN100
IPL-0.50

TRIN100
SPL-1.06.0000

(at the bottom is says "Serial")
----------------------------

What does this mean?

And it didn't matter which button I pushed, nothing happened.
Only a soft-reset helped.

[Aero]

I wanted to find out my CID.
But when i enter the Boot-Loader (power-button + camera-button + Reset-button) I get this Red Green Blue White screen with the following text:
----------------------------
TRIN100
IPL-0.50

TRIN100
SPL-1.06.0000

(at the bottom is says "Serial")
----------------------------

What does this mean?

And it didn't matter which button I pushed, nothing happened.
Only a soft-reset helped.

You dont need to push any button in the device after that.

turn off activesync, plugin the usb, open up mtty, put it in usb then info 2.

complete info at link below.

http://wiki.xda-developers.com/index.php?pagename=Trinity_BootLoader

[Azamat]

Mine returns: HTCSHTC__E11scÑlHTCE
I understand that "HTC__E11" is my CID?

I also did "task 2" it told me "Level = FF" so it's CID-locked...

[anonimo]

Mine returns: HTCSHTC__E11scÑlHTCE
I understand that "HTC__E11" is my CID?



Yes it is.

[yegor]

Oh! It needs to be in bootloader mode for it to work, Im stupid.

Looks like mine is CID locked too.... :(