Error 114 Upgrading Radio. No GSM. No IMEI.No Protocol. The CID is Locked (Level=FF)

[tomsan]

Error 114 when upgrading Radio an Vodafon V1640 (Spain).
Display "No GSM". No IMEI. No version Protocol...


Windows Mobile (CE) Run OK and Upgrading this OK.
Extended ROM run OK and Upgrading this OK.


The CID is Locked:

in mtty.exe:

USB>task 32
Level=FF
USB>


Impossible Mission upgrading all ROMS Radio (including Room of Buzz, 0.00.0 and the rest 1.04, 1.06, 1.08, 1.09, 1.11, etc etc).


And I Exec the tool of Buzz from the HTC Universal, it DOES NOT WORK.

I have tried everything. ...¿¿¿ Exists some solution for this problem ??? :( :( :(

[tripledes]

Hi, which method have you followed to upgrade your device?

[tomsan]

(Excuses for my bad English)



I have a Vodafone V1640 (Spanish) and unlock this with the tool of Buzz, (From Radio original version 1.09 TO Radio version 0.0.0.0). Soft Reset, and exec the Unlocker of Buzz from my HTC.

Up to here all OK. YES, I work the unlocker. All OK.


But, later 4 or 5 days, and various soft-reset and one hard-reset, I have a next message on the display at reboot:

"No GSM",

and not recognize my SIM Card, and not have IMEI, and not have Protocol...

In addition, either, I can not install other Radio ROM, because i have the next error:

ERROR 114 RADIO ROM UPDATED ERROR

this with all of radio roms possibles (1.03 , 1.04, 1.05, 1.06, 1.08, 1.09, 1.11...)

Desperate, also upgrade the Bootloader (from the original 1.00 TO 1.01)

All equal, Same error.


After 3 months I have seen that there is people who happen to him just like to my, but with other models of HTC (ex. Hermes), Unfortunately , I believe that there is no solution for the HTC Universal .


I believe that my error was no upgrade later the special radio 0.00.00 TO Radio 1.11 for example, AND Upgrade the Bootloader 1.00 TO 1.01 .


Now that the situation is this:

- The Radio does not work, ¿¿Is corrupted, Broken??
- I cannot update the Radio (Error 114)
- Wit the tool mtty, type:
USB>task 32
Level=FF (Not SuperCID !!!)
USB>

either, now, the tool of Buzz does not work ( it works, but it does not do anything ) .

This user have the same problem:
http://forum.xda-developers.com/showthread.php?t=289260

And the This classification I have Type 1a :
http://forum.xda-developers.com/showthread.php?t=286755
but this is for HERMES , Not for HTC Universal, I proved it but it did not work .

Please, can yo help me? ¿¿has solution this disaster for HTC Universal (Vodafone V1640 Spain)?

Excuses for my bad English!!

¡¡and thanks for any answer!! :(

[tripledes]

Ok, let's see ... what I really meant was are you upgrading with your device in "bootloader mode" or once WinCE is booted?

If you're doing it with the WinCE already running, please try putting your device on bootloader (Power+Light+Reset) and run again Buzz's unlocker (with Ma_UpgradeNoID.exe).

If this method doesn't work take a look to this thread:

http://forum.xda-developers.com/showthread.php?t=289260

It talks about reflashing your radio using an SD image dumped from another device, this could harm your Universal...so don't blame me! ;)

Currently there's not radio dumped in the ftp so I will try to get it tonight or maybe tomorrow, I have installed on my device 1.14.10.

Hope the first method will work! :)

[tomsan]

Please, you could explain to me like flash the radio with a SD Card (step by step).


I have all the Radio Roms, but never I upgrade by the SD Card, (the format that must have, etc etc). Always I upgrade flasheado by USB.


Thanks :)


And I have read if the CID is Locked (is my case) it will not work either because he command "lbl" from mtty.exe it not work .....
:(

Oh mon Dieuuu :((

[tripledes]

Ok, the dumped Radio rom 1.14.10 it's now here (ftp://xda:xda@ftp.xda-developers.com/Universal/Technical/XDA Exec ERROR 114/Universal-dump-radio-1.14.10.img.gz).

I have never perform this, but as far as I understand you have to make a raw copy of my dumped image to a blank SD card, insert it on your device and get into the bootloader.

Wait some seconds and something will be written on your display, just asking to press power to begin with the flashing.

But again I'm just guessing....:)

BTW, I did the image file using linux command 'dd' so if you use linux as well it should be easy to restore it to an SD card. Sorry I can't tell about windows.

Good luck! :D

[tomsan]

thanks , I download the file, and to copy a my Sd Card with ntrw.exe

F:\>ntrw write Universal-radio.img j:
NTRW v2.00
Removeable media
Cylinders: 0:62
TracksPerCylinder: 2
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
63569920 bytes written

ALL OK, (my SD Card is the 512 MB). Input the Card in the device, soft-reset, enter the bootloader... and Not Run. ¿?¿? :(

Any have idea? that I make bad?
I will continue investigating….

[tomsan]

Help, How to Load the Rom by SD Card?

In mtty 1.42 and 1.16 , the command s2d

Level = FF
USB>s2d
Invalid command : s2d
For a help screen, use command ? or h
USB>


Howto load the ROM from SD Card to the device?
And with the format?

Please help, this is my last hope... :(

[tripledes]

Hmm maybe I did something wrong....may I assume you're Spanish? If so please feel free to contact me privately and I could send you my little 64MB SD card, I have tested it and works, I mean I didn't flash my device with it but I've seen the option to do the flashing :)

[Midget_1990]

as far as i know the card MUST be 128mb (taken from the service manual and my personal experience)

[tripledes]

as far as i know the card MUST be 128mb (taken from the service manual and my personal experience)

I thought it was more a matter of space than a real requirement cause I just dumped the full radio (~16MiB).

Could someone please confirm this?

Thanks.

[tomsan]

I obtaining a card of 128 MB and I have repeated the process.

F:\>ntrw.exe write uni.img j:
NTRW v2.00
Removeable media
Cylinders: 0:15
TracksPerCylinder: 255
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
63569920 bytes written

F:\>

I enter bootloader with the sd card and it does not pass anything. :(



Not to be because the security level is Level = FF (and not is SuperCD) ???

From mytt, type task 32:

USB>task 32
SD:Waiting for card insert.........

CMD3 for SD, it's OK, ready to get RCA from response.

SD:Detected one card

SD:ready for transfer OK

d.total_lba=3BF00
d.block_size=200
d.RCA=1
d.drv_type=40000000
d.busWidth=1
Total card size=77E0000

Wait interpreter timeout
Level = FF
USB>

[tomsan]

Tripledes, I have sent you a private message :)

[tecumseh]

Tripledes, I have sent you a private message :)

I have the same problem of "no GSm",could you please send me the massage too. Thanks

[tecumseh]

thanks you guy! I have step by step, and when I updated by sd card, the screen show me "sections=1 not allow update". who can give me more advise,
I have same problem.

[hdubli]

the rom headers r differrent..u need to copy the headers.I know that for a ce rom first 416 bytes r to b copied..for radio i don't know..may be someone can tell here

[ruirego]

I have the same problem of "no GSm",could you please send me the massage too. Thanks

Hello,

Same problem here, http://forum.xda-developers.com/showthread.php?p=3187581#post3187581

Did you solved??? How

Rui