G4 WM6 BRICKED! please help ASAP!!!!

[nstefanelli]

I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help

[bwesty]

If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.

If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.

[ercave1]

I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help

Check your PM's

[nstefanelli]

If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.

If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.

i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs

Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001

It doesnt get past bootloader, and I would really like to put WM6 on it.

At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.

[samy.3660]

gREETINGS,
Just follow this steps u will be out of it.

Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.

When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.

Thanks

[nstefanelli]

gREETINGS,
Just follow this steps u will be out of it.

Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.

When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.

Thanks

I cannot do that because the Carrier ROMs that I have aren't for G4, so they arent working. I have three different carrier ROMs for my phone.. and none of them work.

-Stefanelli-

[ercave1]

i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs

Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001

It doesnt get past bootloader, and I would really like to put WM6 on it.

At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.

Check your email, I downloaded and zip works fine here.

[a-h-t1]

i'm facing this problem right now , i will solve it with the original rom .

the problem started when i used shelltool to upgrade my G4 CID Locked to windows mobile 6 crossbow underground edition .

i will give it another try when i get my device alive again ,

any suggestions for the WM6 underground to make it work using shelltool on my wiza 200 ??

--------------------- Edit -----------------------

Finally i solved the problem and installed Crossbow WM6 underground edition .

all i did is to install the original rom from provider and then used shelltool to install WM6 . :D

i want to mention that my wiza200 is G4 and its CID Locked .

Huge thanx to mUn , you are da man ;)

[lobiik]

I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all :)

[a-h-t1]

I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all :)

whats your device and is it G3 or G4 ?

try to do as i did and it worked for me , install the provider flash , then try shelltool to flash WM6 underground .

WBR

[lobiik]

whats your device and is it G3 or G4 ?


Mine is G4, dunno if cid is locked or not. I've flashed it as I said with wizard love rom and working without problems. I've tried that again this morning, to flash from love rom, but the same. At 96% it hangs, error 302 Communication error, then starts recovery process, phone goes to bootloader mode. Then is possible to flash it with love rom again with no problem

[easymob]

i have a g4 wizard using the shell tool i have chaged my rom on my phone sometimes 3 times a week just to test them out

the shell tool works if you cant download from the forum here is the link for it

http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip

[lobiik]

yes, but when I run shelltool, and press get rom info, all fields states N/A

info from phone is:
ROM Version: 2.26.10.2 WWE
Radio: 2.25.11
ExtROM: 2.26.10.105
IPL/SPL: 2.17.0001

And anyway, dunno exactly which rom for WM6 I can put in (I've just 5.underground_edition_Crossbow_ROM.exe which stucks at 96% with 302 error)

[lobiik]

well, I'm dumb, mislooked one stupid thing. Everything passed without errors, Windows Mobile 6 is up and running :)

[a-h-t1]

happy to know that , the problem was installing rapi ha ??

WBR

[lobiik]

No, not really, rapi and that second cab was in device, it was restarted, but I did a mistake - i didn't copied that desired rom into updater directory - that was why were all fields N/A... did that, flashed on first try, without problem

[KamiKaaze]

I had the same problem, orginal rom from the provider, and I can reflash it again.....

THX for the info......

[ajaylulia]

Hi lobiik,

which ROM did you use for your device, as you comments above:
"i didn't copied that desired rom into updater directory "

can you please point me to location where i can get the ROM, also proper steps to install the same.


Thanks,
Ajay