[release] WST v0.3.0.3 - Wizard Service Tool

[mestrini]

WST - Wizard Service Tool is aimed at those not comfortable with command lines and perl installations since it packs most of itsme's tools and presents them in a 'easy-to-use' graphical interface

You won't be getting anything new from it since it suffers from same limitations as all the tools stuck with DOC chips write protections and since it's still in development stage there are some options disabled and some procedures not completed.

Anyway... i hope you enjoy it.

cheers
mestrini

PS:
Read the 'Readme.txt' file inside the archive as it contains instructions regarding the installation

PS2:
ALWAYS make a backup of different ROM/DOC zones in case something goes wrong or you'd like to return to previous condition!!

EDIT:
28-02-2007 - released version 0.2.01
05-05-2007 - released version 0.3.00 (bit bigger since it includes typho5.exe to decrypt nbf files)
16-05-2007 - released version 0.3.0.2 with some minor additions
31-05-2007 - released version 0.3.0.3 with a bug fix (Key index #0 wasn't recognized - tx Zzan)
12-09-2007 - released version 0.4.0.0 (http://forum.xda-developers.com/showthread.php?t=329170) <== CLICK THERE
(http://forum.xda-developers.com/showthread.php?t=329170%29)

[mestrini]

Check some pictures of the tool :cool:

[hanmin]

very nice...

[kull]

Can it be used to CID unlock?

[mestrini]

Can it be used to CID unlock?

Only G3 devices downgraded to 1.x IPL/SPL since it depends on DOC write protection

[kull]

Ah ok... thanks

[Skwyk]

"Write IMEI"?
Can this application change IMEI of my phone?

o.O

[mestrini]

"Write IMEI"?
Can this application change IMEI of my phone?

o.O

It can as long as it is a downgraded (SPL 1.x) CID unlocked G3 device :D

Once again i remind you all that it relies on itsme's tools which work with m-systems TrueFFS that (so far) can't bypass the DOC write protection

PS:
I'm sure that anyone with C knowledge and will to study extendedromunlocker.cab sources by itsme could manage a way to unprotect the DOC partitions. :p
Unfortunately i'm not a C guy :(

[foxenesys]

I'm maybe missing something.

See what it gives me after setup (this is the same on two different configuration).

I've checked the ./files subdirectory and all files exists.

NB : Running a french Windows XP

[foxenesys]

OK.
Procmon tells the RXLaunch.exe process is seeking for the files into the "C:\Program files\Reginald\files" directory.

[mestrini]

OK.
Procmon tells the RXLaunch.exe process is seeking for the files into the "C:\Program files\Reginald\files" directory.


maybe it's missing an installation file and not a support file. :confused:

I'll review the routine to check for files and make it report the specific missing file(s)

[fuzion]

same error here.

[XDAWizard]

The Same here

[cyberdrakula]

The Same here


Same Error.

[mestrini]

Same Error.

Sorry guys :p. Looks like an installer bug :confused:

Can you check if the desktop shortcut link points to the installation folder?

Anyway, check new version (0.2.01) on first page but remember to unnisntall old version

[foxenesys]

Flawless.
Works OK.

[niall0s]

Has anyone used this to sim unlock a g4 device?

[ultraprimeomega]

Cool tool:cool:

[mestrini]

Has anyone used this to sim unlock a g4 device?

The SIM unlock feature has same limitations as CID unlock since it's not possible to write the modified data to the CID zone. I've tried to reach machinagod to know if he could unveil the process of calculating the SIM unlock code but he didn't respond any of my contacts :(

So the answer is: NO, it's not possible to SIM or CID unlock G4 devices

[chemu]

can this tool be used to flash the extended rom of a G4 CID locked device from a .nb file? and how.

[mestrini]

can this tool be used to flash the extended rom of a G4 CID locked device from a .nb file? and how.

Yes it can. Just get the 10MB *.nb file and use the "Write ROM" option to flash the "Extended ROM (BDTL - TFFS1)" zone. After a soft reset you'll see the files; after a hard-reset it will install the stuff (in case it's an ext-rom with autorun ;))

You can also follow faria's tutor to create your own extended rom by using a tool like Winimage and flash it same way as above :D

cheers

PS:
Unless the extended_rom DOC chip zone is write protected as the CID zone is...

[chemu]

Thankyou very much for your help and for your great tools.

PS:
I guess the extended_rom zone is not write protected because it worked.

[mestrini]

Thankyou very much for your help and for your great tools.

PS:
I guess the extended_rom zone is not write protected because it worked.

And i thank you for your feedback :) Now i know that it is indeed possible

cheers

[zerocool09]

my case/Vario when reading CID

[mestrini]

Did you enable RAPI and Applications Policy before trying that? Is Vario same as Wizard?

pls reply

[zerocool09]

Did you enable RAPI and Applications Policy before trying that? Is Vario same as Wizard?

pls reply

1/ Sure to enable RAPI and Applications Policy before trying that.
2/ they are the same

[mestrini]

can you please read the CID block to a file and send it to me?

mestrini_gsm-at-gsmhelp.info

tx

[zerocool09]

can you please read the CID block to a file and send it to me?

mestrini_gsm-at-gsmhelp.info

tx

pls advise if the following is correct :

CID Actions -> Write custom CID -> to File -> GO

then, the answer still the same "Could not determine a key index!! Aborting operation."

[mestrini]

pls advise if the following is correct :

CID Actions -> Write custom CID -> to File -> GO

then, the answer still the same "Could not determine a key index!! Aborting operation."

hmmm, looks like you can't take that path as it always looks for the key...

You must use the "Read ROM" button and select the CID block then ;)

[zerocool09]

hmmm, looks like you can't take that path as it always looks for the key...

You must use the "Read ROM" button and select the CID block then ;)

I try all buttons with all function fm buttons but there's no choice than "Aborting operation!!"

Now I have to change my Vario to another G3 Vario.

[mestrini]

I try all buttons with all function fm buttons but there's no choice than "Aborting operation!!"

Now I have to change my Vario to another G3 Vario.

:confused: I'ma bit lost. Can you even read the IMEI of the phone?

[zerocool09]

:confused: I'ma bit lost. Can you even read the IMEI of the phone?

No, even with reading IMEI. I cannot perform any action fm you tools with my Vario (G4) but it works with my new G3.

[zerocool09]

btw : yr tool can read my Ext_ROM but cannot unhide it

[mestrini]

No, even with reading IMEI. I cannot perform any action fm you tools with my Vario (G4) but it works with my new G3.

I have the feeling that you are missing the RAPI and Apps policy procedure. That's the only explanation i find for not being able to read your phone. Btw, what OS does your G4 have?

[zerocool09]

I have the feeling that you are missing the RAPI and Apps policy procedure. That's the only explanation i find for not being able to read your phone. Btw, what OS does your G4 have?

surely I run RAPI and Apps first, however , it couldn't help.
After post my question, I run RAPI and App even after SR, not HR. Still the same.
My ROM
RUUminiS_Prodigy_2210206_22102109_021911_TMO_UK_WW E_Ship

[zerocool09]

attached the enbale RAPI picture

I don't know the difference between yr uploaded pictures and mine :
_____________ ________________
|nbf extracter | |.......................|
--------------- ------------------

[mestrini]

attached the enable RAPI picture

I don't know the difference between yr uploaded pictures and mine :
_____________ ________________
|nbf extracter | |.......................|
--------------- ------------------

As i said in first post, the program is still in development state so the pictures are for the first released version and the one you post now is from an earlier version with some, not yet implemented, features.

[zerocool09]

now, it works well with my new Vario G3.
Thks for yr support and yr useful tool !!!

[GateArray]

my case/Vario when reading CID

Same problem in a WIZA200 QTEK with IPL-SPL 3.08 G3 dev.

[GateArray]

bumb...

no news?

[mestrini]

bumb...

no news?


I just installed a WM6 ROM and found out that itsutils.dll isn't being copied to the Windows folder. Please check if you have that file in there. In case you don't then copy it from WST folder via ActiveSync and then try again.

post results

EDIT:
To be more precise it's the RegSetValueEx() ,used to change a registry value, that isn't being accepted by a device with WM6. This means that, for now, one must change the registry policies by hand or upload and run the cabs (Cert_SPCS.cab and EnableRAPI.cab) to make it work.
cheers

[mestrini]

Strange, i thought that itsme's pregutl.exe didn't need RAPI to be enabled in order to work :confused: but it looks like in WM6 it does (maybe i must dowgrade to WM5 again and recheck.)
Anyway, i'm almost finishing a new version (v0.3.00) that will cover this (I hope).

sorry for that :rolleyes:

[goggel]

Hi!

Thank you for a great tool but how exactly do I install the extended ROM on my G4 CID locked device?

[mestrini]

Hi!

Thank you for a great tool but how exactly do I install the extended ROM on my G4 CID locked device?

First you must get the 10MB file either from a backup or decrypted from an nk.nbf file (extracted from an RUU)

Then select the option "Write ROM" and scroll down the list until the Extended Zone and flash the file. As simple as that :D

[GateArray]

mmm I got the problem with WM5.

Can I test / try something else?

[mestrini]

mmm I got the problem with WM5.

Can I test / try something else?

Yes, check first page with version 0.3 since it has a fixed detection routine; maybe it'll help.

cheers

[uzak]

hi
i make imei change my Rom imei 15 digit but new imei 14 digit i am not understand?
please ansver

[mestrini]

hi
i make imei change my Rom imei 15 digit but new imei 14 digit i am not understand?
please ansver

The IMEI number consists on 14 digits being the 15th a checksum digit calculated with Luhn's Algorithm (http://www.orate.co.uk/Mobiles/imei.html - http://en.wikipedia.org/wiki/IMEI - http://en.wikipedia.org/wiki/Luhn_algorithm)
This means that all you must provide is the 14 digits that my application calculates the last one automatically :cool: and displays the full 15 digits IMEI after the job is done

[freeyayo50]

Only G3 devices downgraded to 1.x IPL/SPL since it depends on DOC write protection

Since you updated the program. Can CID be unlocked on G3 devices with 2.xx IPL/SPL??
Also, can the IMEI be changed now??

Or is all this still not possible

[mestrini]

Since you updated the program. Can CID be unlocked on G3 devices with 2.xx IPL/SPL??
Also, can the IMEI be changed now??

Or is all this still not possible

Still not possible, sorry :(

That protection is enforced by the SPL and unless someone with ARM knowledge decides to study it there is nothing any tool based on itsme work can do.

[eltornado]

bonsoir j'aimerai bien savoir svp si on px utiliser le wizard service toll en mode bootloader pcq je n'arrive pas a accedé au systeme pr installer enablerapi

[mestrini]

Man, you are annoying. Why don't you write in English? A lot more members could try to help you (not needing to spam the forum) and i already gave you an answer in another post.

NO. My program doesn't work in boot loader mode but the upgrade utilities do, so you must use them to solve your problem. I'm sorry.

Good luck


French version:

Sacré bleu, vous ennuyez. Pourquoi vous n'écrivez pas dans l'anglais ? Beaucoup plus de membres pourrait essayer de vous aider (n'ayant pas besoin de spammer le forum) et je vous ai donné déjà une réponse dans une autre poste.

NO. Mon programme ne travaille pas dans le mode de chargeur de botte mais les utilités de montée fait donc vous devez les utiliser pour résoudre votre problème. Je suis désolé.

Bonne chance

[mestrini]

New version bump :p

[freeyayo50]

Is that the only fix/update for v0.3.0.3??

[mestrini]

Is that the only fix/update for v0.3.0.3??

Yes. If you're using it your phone you don't need it but in case you want to use it in someone's with keyindex #00 you won't be able to do the CID actions, that's all.

[GateArray]

Now it works...
great job m8!

[rysio123]

i have hermes 300 , what next i cant unlock cid etc, i upgraded wm 5 to wm 6,
when i install the wst v03 and v02 all the time that same, i put a picture how look that when i press read info when i press unlock cid, Mestrini tell me how i can unlock that htc ? i try many solution and nothing :( if it is just use imei-check to unlock for 20Ł tell me

[luiggi]

i have hermes 300 , what next i cant unlock cid etc, i upgraded wm 5 to wm 6,
when i install the wst v03 and v02 all the time that same, i put a picture how look that when i press read info when i press unlock cid, Mestrini tell me how i can unlock that htc ? i try many solution and nothing :( if it is just use imei-check to unlock for 20Ł tell me

Go to the right forum
http://forum.xda-developers.com/showthread.php?t=293665
It´s a very useful tool and very simple to use, good luck

[freeyayo50]

I got a question....wouldn't CID unlocking with your tool be the simplest and easiest method??

Someone can just grab a 1.xx SPL, than flash it to thier device. After, CID unlock it, than flash there original SPL back to thier device. There would be no need for flashing a person's ROM. Am I right??

[starkwong]

It's true, if you can get a RUU with only IPL and SPL, and you successfully make your IPL and SPL both downgraded to 1.xx. Then you can just CID unlock and put back other IPL and SPL or just flash other ROM that with IPL and SPL.

[mestrini]

It's true, if you can get a RUU with only IPL and SPL, and you successfully make your IPL and SPL both downgraded to 1.xx. Then you can just CID unlock and put back other IPL and SPL or just flash other ROM that with IPL and SPL.
Be carefull with what you advise. It's dangerous to downgrade IPL/SPL to 1.xx and keep OS 2.xx. I had to use the SD recovery routine in order to get my wizard back because of an IPL/SPL 1.06 and an OS 2.17. Always downgrade IPL/SPL AND OS to 1.xx (that's why Button's ROM is the most used ;) )

I got a question....wouldn't CID unlocking with your tool be the simplest and easiest method??

Someone can just grab a 1.xx SPL, than flash it to thier device. After, CID unlock it, than flash there original SPL back to thier device. There would be no need for flashing a person's ROM. Am I right??

Well, it's what happens with G3 devices. One downgrades and the uses my tool, lokiwiz or itsme's scripts (not forgetting that the latter is always present)

As for G3 2.xx and G4 the problem is that the SPL issues a command that write-protects some of the DOC chip zones, more precisely the CID block and the gsm_data zone (IMEI protection)

[freeyayo50]

So it's not possible to just downgrade the SPL and CID unlock without the OS being downgraded to 1.xx as well??

[mestrini]

So it's not possible to just downgrade the SPL and CID unlock without the OS being downgraded to 1.xx as well??

I won't say for sure that it can't be done but people usually use the Button ROM which has IPL/SPL 1.01 and OS 1.05 and from my own experience i tasted the "Frozen at splash screen" problem no matter what RUU (Official or not) i flashed.

[freeyayo50]

Alright, thanks. I was asking for the sake of, CID unlocking your device without losing your installed OS and/or apps/info. That is what I was thinking.

[mestrini]

Alright, thanks. I was asking for the sake of, CID unlocking your device without losing your installed OS and/or apps/info. That is what I was thinking.


Only imei-check tool can do that since they use the SPL directly to apply the changes so no need to ever load the OS. WST instead uses winCE to write to DOC and for that the OS must be loaded (hence the need for the SPL/OS correspondence ;) )

cheers

[freeyayo50]

Only imei-check tool can do that since they use the SPL directly to apply the changes so no need to ever load the OS. WST instead uses winCE to write to DOC and for that the OS must be loaded (hence the need for the SPL/OS correspondence ;) )

cheers

1) Is the IMEI Check Tool here on the forums??

2) With your tool, when writing a ROM (GSM, OS or Ext), the device does not enter bootloader mode correct? That's what you mean by SPL/OS correspondence.

[mestrini]

1) Is the IMEI Check Tool here on the forums??

2) With your tool, when writing a ROM (GSM, OS or Ext), the device does not enter bootloader mode correct? That's what you mean by SPL/OS correspondence.

1- imei-check is a paid unlocking service. You must buy the sw at their site;

2- Yep, the phone must be operational. Like when using it on everyday tasks.

If i can find the time this weekend i'll try to make a picture with the way things work regarding boot and operation.

cheers

[freeyayo50]

Ok, thanx mestrini. Yea pictures would be good to see.

[luiggi]

I used WST to read the OS of a G4 Wizard locked with IPL/SPL 2.26.0001, then I used WST to write this same OS in another G4 Wizard locked too with IPL/SPL 2.25.0001. Everything worked smooth and great. Great job mestrini !! :)

[Andy Phillips]

Hi Mestrini,
Great tool!
I'm using it to make a backup of my fone in entirely..one question tho!
When making a backup of the user area does it backup current data or only whats installed by default?
Many thanks,
Andy. :D

[mestrini]

I can't tell for sure since it's been a long time since i used that feature.
The problem is that unless you 'read' the dump with an hexeditor you won't have much use for it since it's not possible to writ back to the phone. The reason? WinCE is using that area while phone is ON and won't allow to write to it via RAPI. Unlike any other areas that are loaded to RAM at boot this one is actually being used at runtime.

sorry

[Andy Phillips]

I can't tell for sure since it's been a long time since i used that feature.
The problem is that unless you 'read' the dump with an hexeditor you won't have much use for it since it's not possible to writ back to the phone. The reason? WinCE is using that area while phone is ON and won't allow to write to it via RAPI. Unlike any other areas that are loaded to RAM at boot this one is actually being used at runtime.

sorry

Oh well...thanks anyway!
What got me started on this was a tool from SPB that'll 'clone' everything thats installed on your OS and write it to another device with the same hardware/firmware. They want around $500 for it!!! Would love t know how they do it!:D
Another question...probably dumb but here goes..is there no way to take the OS.fls/nb and the UA.fls/nb files and merge them into an nk.nb?

[freeyayo50]

Is there any tool that can do what your app does but while the device is in the bootloader mode so you can have access to do more things??

[mestrini]

Is there any tool that can do what your app does but while the device is in the bootloader mode so you can have access to do more things??

Yes. The mtty but it requires CID unlock or security level 0 since bootloader (SPL) checks it :p

Another question...probably dumb but here goes..is there no way to take the OS.fls/nb and the UA.fls/nb files and merge them into an nk.nb?

With OS you can do it the way Luiggi did (previous page in this thread); simply read from one and flash to another, being carefull with differences between SPL and OS.
As for UA the problem is that its location isn't mapped in the bootloader and thus not possible to flash via RUU (the installer wouldn't know where to write to). I believe that except when using it at runtime the only other ocasion this area is written is at hard-reset when it gets formatted.

[PURESKILLZZZ]

Great work MAte...
Just had to come by and say I like it ... Waiting to see the upgrades you add next .

[MrCyberdude]

@Mestrini

If you do update your tool and if any of the following are possible?
Here are some suggestions if you were after any.


1. Dump all screen outputs to a readme_log.txt file
so there is a record of what people have either done,
at least there will be a key record in the file if they ever need it.
Or at least allow copying and pasting from the WST window
I'm Sure you can make the IEMI number an option for the dump,
but i'm sure it will not matter as people can read it in clear text anyways.


2. A DUMP_ALL_ROMs Button Please so i can go make dinner, come back and have all ROMs dumped.


3. Have the dump files Autoprompt the name, Something like
WST_YyyyMmDd-HhMm_ReadROM-CID
WST_YyyyMmDd-HhMm_ReadROM-EXT
WST_YyyyMmDd-HhMm_ReadROM-GSMCAL
WST_YyyyMmDd-HhMm_ReadROM-GSMRADIO
WST_YyyyMmDd-HhMm_ReadROM-OS
WST_YyyyMmDd-HhMm_ReadROM-UA

4. increase the delay for the "Wizard not detected" or "Device is not a Wizard" error that i get quite often.

5. How about a 2 second exit so we can read your goodbye message.

or Feel free to do nothing and leave it as it is. ;)


Love your Tool............. That really sounds so wrong... :o

[PURESKILLZZZ]

@Mestrini

If you do update your tool and if any of the following are possible?
Here are some suggestions if you were after any.


1. Dump all screen outputs to a readme_log.txt file
so there is a record of what people have either done,
at least there will be a key record in the file if they ever need it.
Or at least allow copying and pasting from the WST window
I'm Sure you can make the IEMI number an option for the dump,
but i'm sure it will not matter as people can read it in clear text anyways.


2. A DUMP_ALL_ROMs Button Please so i can go make dinner, come back and have all ROMs dumped.


3. Have the dump files Autoprompt the name, Something like
WST_YyyyMmDd-HhMm_ReadROM-CID
WST_YyyyMmDd-HhMm_ReadROM-EXT
WST_YyyyMmDd-HhMm_ReadROM-GSMCAL
WST_YyyyMmDd-HhMm_ReadROM-GSMRADIO
WST_YyyyMmDd-HhMm_ReadROM-OS
WST_YyyyMmDd-HhMm_ReadROM-UA

4. increase the delay for the "Wizard not detected" or "Device is not a Wizard" error that i get quite often.

5. How about a 2 second exit so we can read your goodbye message.

or Feel free to do nothing and leave it as it is. ;)


Love your Tool............. That really sounds so wrong... :o

Its not my tool but I like those ideas ....

[mestrini]

@Mestrini

If you do update your tool and if any of the following are possible?
Here are some suggestions if you were after any.

Love your Tool............. That really sounds so wrong... :o

It's always nice to have feedback and suggestion m8; very welcome and they all look feasible. :)

Last comment... yeah, a bit tricky choice of words :D

EDIT:
psst, look at the pic ;)

[PURESKILLZZZ]

It's always nice to have feedback and suggestion m8; very welcome and they all look feasible. :)

Last comment... yeah, a bit tricky choice of words :D

EDIT:
psst, look at the pic ;)

Nice program ..... Shreads meaning gov erase ...

[starkwong]

It is weird that I can't use the program.
When I click any of the buttons, the log is showing "Detecting device", then it waits forever.

My Wizard is a Dopod 838 G3 Unlocked.
Desktop is using Traditional Chinese language of Windows XP (Installed in drive E, however mapped drive C back to E so they looks like the same).

The REXX Interpreter is installed in default location (E:\Program Files\Reginald)

[PURESKILLZZZ]

It is weird that I can't use the program.
When I click any of the buttons, the log is showing "Detecting device", then it waits forever.

My Wizard is a Dopod 838 G3 Unlocked.
Desktop is using Traditional Chinese language of Windows XP (Installed in drive E, however mapped drive C back to E so they looks like the same).

The REXX Interpreter is installed in default location (E:\Program Files\Reginald)

Does any other program see your phone ? Does activesync see your phone ?

[mick.j]

Does any other program see your phone ? Does activesync see your phone ?

First, thanks for integrating these fine tools into an easy to use package. :D

Don't know if this is related but I found that if the filename to be saved to has spaces in the filename then WST will report a device problem. Reports "couldn't get any data from phone." I am running 0.3.0.3 on W-XP

For info, when first installed I had a problem re. the working folder, I use the start menu and applied the fix given at the beginning of this thread for the Desktop shortcut to the shortcut in All Programs section and all works OK now. :)

[PURESKILLZZZ]

First, thanks for integrating these fine tools into an easy to use package. :D

Don't know if this is related but I found that if the filename to be saved to has spaces in the filename then WST will report a device problem. Reports "couldn't get any data from phone." I am running 0.3.0.3 on W-XP

For info, when first installed I had a problem re. the working folder, I use the start menu and applied the fix given at the beginning of this thread for the Desktop shortcut to the shortcut in All Programs section and all works OK now. :)

So everything on your phone is good or is there still a problem mate .

[mick.j]

So everything on your phone is good or is there still a problem mate .
No problem re. loading the program following the shortcut working folder fix as mentioned and only a problem when saving if spaces used in the file name otherwise OK but mentioned because it gives a similar error that makes it look like there is a problem with the wizard.

[weresgyufa]

Hy, this toll Works whit Universal or its ani toll that can change the IMEI number, change te CID .
Thx 4 the help.

[mestrini]

No problem re. loading the program following the shortcut working folder fix as mentioned and only a problem when saving if spaces used in the file name otherwise OK but mentioned because it gives a similar error that makes it look like there is a problem with the wizard.
Next version will be portable and with the scripts compiled in a EXE so REXX install won't be required and shortcut issues won't happen (i hope :p)
I'll check that 'name with spaces' issue and see if it requires fix.
tx

Hy, this toll Works whit Universal or its ani toll that can change the IMEI number, change te CID .
Thx 4 the help.

No it doesn't. This is EXCLUSIVELY for Wizard. It may work with Prophet (SIM and CID unlocking, and maybe changing IMEI) but no support from me (unless someone is willing to work with me in testing)

[Noonski]

So any time soon you are going to integrate changing the page pool?

[mestrini]

So any time soon you are going to integrate changing the page pool?

huh? What do you mean? I'm sorry but i'm not familiar with it except that there are different cooked ROMs with different page pool.

[freeyayo50]

huh? What do you mean? I'm sorry but i'm not familiar with it except that there are different cooked ROMs with different page pool.

He means, are you going to have function in the next version that easily modifies the part of the ROM that controls the size of the paged pool. All it takes is 2 hex values to change it, i believe.

[PURESKILLZZZ]

huh? What do you mean? I'm sorry but i'm not familiar with it except that there are different cooked ROMs with different page pool.

When will the full version of the new version be ready sir ?

[Noonski]

huh? What do you mean? I'm sorry but i'm not familiar with it except that there are different cooked ROMs with different page pool.

Yes indeed freeyayo50 (http://forum.xda-developers.com/member.php?u=331596) was right.

I meant this development over here:
http://forum.xda-developers.com/showthread.php?t=323538

That shouldn't be to hard to intergrate (not that i know any thing)

[mestrini]

Yes indeed freeyayo50 (http://forum.xda-developers.com/member.php?u=331596) was right.

I meant this development over here:
http://forum.xda-developers.com/showthread.php?t=323538

That shouldn't be to hard to intergrate (not that i know any thing)

tx for the tip ;)
looks pretty easy to implement, guess i'll do it and maybe some other reg tweaks who knows (if someone finds it useful)

[starkwong]

Does any other program see your phone ? Does activesync see your phone ?
Sure, I use that PC to flash new ROMs to my Wizard without any problems, and ActiveSync works fine.

[starkwong]

Integrating PagePool customization is good, however are there any methods to determine if the OS in Wizard is particular version? It may be dangerous because pagepool size location in different ROM build are different.

[freeyayo50]

Integrating PagePool customization is good, however are there any methods to determine if the OS in Wizard is particular version? It may be dangerous because pagepool size location in different ROM build are different.

True. But, his implementation of this feature should be for official ROMs...as the page pool location is usually in the same place.

[starkwong]

It is not a big deal to change Page Pool size on official ROMs...

[PURESKILLZZZ]

Sure, I use that PC to flash new ROMs to my Wizard without any problems, and ActiveSync works fine.

So then you have a very strange issue . Show me a particular file to be exact on that you doing . I want to try the same file in my phone.

[Noonski]

Well than it's good most cooks use a Base unofficial Wizard Rom.

[MrCyberdude]

i haven't read up on the page pool byte hex edit but its probably easy to search for the surrounding hex and patch the middle bytes.
It wouldn't matter about it being in a different address in each rom then.

This would be another reason for peoplet use WST as there is always ppl asking for different size versions.

[mestrini]

i haven't read up on the page pool byte hex edit but its probably easy to search for the surrounding hex and patch the middle bytes.
It wouldn't matter about it being in a different address in each rom then.

This would be another reason for peoplet use WST as there is always ppl asking for different size versions.

Tx for the 'tip' m8. I've been working on it already and i do know the pattern and that there are two equal patterns in every ROM - WM5,WM6, Cooked or Official - but i'm expecting a response for the guy that showed it to us to see if he has more info about it.
If not then i'll have to rely on my feeling that it's always the second pattern that matters ;)
cheers

[starkwong]

So then you have a very strange issue . Show me a particular file to be exact on that you doing . I want to try the same file in my phone.
I may try on other PC later to see if this is a problem of that PC or my Wizard...

[PURESKILLZZZ]

I may try on other PC later to see if this is a problem of that PC or my Wizard...

Okies mate .. Do that and I should be around .

[km230580]

Thanks verrry cool tool fr my wizard

[PURESKILLZZZ]

I may try on other PC later to see if this is a problem of that PC or my Wizard...

Was wondering mate if you have tried this on another machine yet .

[kingsizeriz]

Very nice application :)

[mestrini]

Very nice application :)

Tx m8. Version 0.4 should be released next week :D (stay tuned)

[PURESKILLZZZ]

Tx m8. Version 0.4 should be released next week :D (stay tuned)

You know I've been waiting....

[mestrini]

You know I've been waiting....

I hope you find the wait worthwhile :rolleyes:

WST log changes:
---> v0.4.0.0 (??-09-2007)
Cleaned up some code and fixed a lot of errors resulting from new rexx interpreter version;
WST is now PORTABLE, i.e, no longer requires the install of Reginald interpreter and doesn't write to registry;
Replaced the log window (list control) with a text entry to allow selecting and copying the information;
Added more info to "Device Info" feature: cleary states if it's a G3 or G4, shows date of SPL, shows name and visibility status of extended_rom;
Removed 'Repair IMEI' section and placed the button in 'General options' (works the same way as previous);
Eliminated the Extended_ROM window and moved the functions to the main script; Added 'Format ROM' option;
Added a patching for the PagePool that doesn't rely on a fixed address (looks for pattern);
Added option to read IPL from memory;
Fixed the read SPL routine to detect G3 or G4 device (now produces a replica of the SPL.nb);
Added an option to read ALL ROM sections at-once and also automatic file naming;
Finished routine to write SPL (detects if G3 or G4);
Fixed an issue with files being saved with spaces in their names (pdocread limitation, though);

[PURESKILLZZZ]

I hope you find the wait worthwhile :rolleyes:

IS it ready and I already know its worth the wait. :D :D :cool:

[mestrini]

IS it ready and I already know its worth the wait. :D :D :cool:

Released version 0.4.0.0 http://forum.xda-developers.com/showthread.php?t=329170 :D

[jbnh2000]

:confused: please i would like cidunlock my g4 with your soft.
:mad: are you sur it's possible ?
:p if yes whow to do this ?
thanks

[mestrini]

:confused: please i would like cidunlock my g4 with your soft.
:mad: are you sur it's possible ?
:p if yes whow to do this ?
thanks

There's no free G4 CID unlocking. My tool can't do it, period.

[PURESKILLZZZ]

Released version 0.4.0.0 http://forum.xda-developers.com/showthread.php?t=329170 :D

Thanks mate ... Time to go play with it ....

[dominicanodcora]

when clicking on device info it goes to reading values and i get this message

"GUISETCTLVALUE" reported "Error fetching the value for control LOGWINDOW"

in the rexx script named:

at line number: 2219

[mestrini]

when clicking on device info it goes to reading values and i get this message

"GUISETCTLVALUE" reported "Error fetching the value for control LOGWINDOW"

in the rexx script named:

at line number: 2219

get version 4. Link's in first post

[dominicanodcora]

get version 4. Link's in first post

i have the latest one. 4.2.1

[mestrini]

i have the latest one. 4.2.1
so why are you posting here? :confused:

[dominicanodcora]

so why are you posting here? :confused:

cuz i have this error
when clicking on device info it goes to reading values and i get this message

"GUISETCTLVALUE" reported "Error fetching the value for control LOGWINDOW"

in the rexx script named:

at line number: 2219

where else would i post???

[jgdorado]

have you created a Wizard Tool for G4??

[commander5555]

May i flash only splash screens using this on a G4 cidlocked device?

[cinar22]

Hi

I have WST v4.2.1 - Wizard Service Tool

I start it with Async Ok.
First button also works Enable Rapi

Uploading files...
Running Cert_SPCS.cab to change Unsigned
Prompt policy...
Running EnableRAPI.cab to remove restrictions
on RAPI communications...
All Done!

You can fully use this service tool now.
Repeat procedure only after a hard-reset.

From here I get error messages Red!
On click Device Info

Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.

Use first button for that purpose and try again

Can someone tell me what I am doing wrong
Thanks

[mestrini]

Are you using this tool on a HTC Wizard model? (aka Qtek9100 amongst others)

[cinar22]

Are you using this tool on a HTC Wizard model? (aka Qtek9100 amongst others)


Wizard is now Work!
I have hw6916 WWE, G4


Klick on Device Info
It works to some zeule, then breaks it off with an error message

[mestrini]

Wizard is now Work!
I have hw6916 WWE, G4


Klick on Device Info
It works to some zeule, then breaks it off with an error message

Come on guys! Don't complain if you're not using a HTC Wizard :mad:
Isn't hw6916 a HP device?

[PURESKILLZZZ]

Come on guys! Don't complain if you're not using a HTC Wizard :mad:
Isn't hw6916 a HP device?

Well hello as I been away for a while....

I am not complaining as I have loved your work from the beginning ... But a good question is does it work well on G4 or are you planning on making a G4 tool .

[shuaige100]

think you:rolleyes:

[PURESKILLZZZ]

think you:rolleyes:

He maybe busy but I am sure he will say .. You are welcome....

[ndumiso]

Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.

Use first button for that purpose and try again

[mestrini]

http://forum.xda-developers.com/showpost.php?p=2223035&postcount=322

Please use WST 4.2.2 thread next time.
thanks :)

[korus74]

hi ,just a simple question can i use WS Tool with a HTC touch dual ? i'm trying but the program doesn't seem to read the device! thx

[Pisca]

WST means "WIZARD" "SERVICE" "TOOL"

so for the 1.000.000.000 times only for Wizard devices - G3 only

[PURESKILLZZZ]

WST means "WIZARD" "SERVICE" "TOOL"

so for the 1.000.000.000 times only for Wizard devices - G3 only

Thank you for clarifying that mate ..... ROFLMAO .... :D

[usef80]

Actually I did download WST_v4.2.2_setup but unfortunately when I try to start the application it says that has failed because MSVCR71.dll was not found.
Can you please tell mewhat instructions should I follow ?

[mestrini]

If you downloaded WST 4.2.2 from the original post then you should have read that the package includes the dll file you're missing. Also the read me file tells to copy it to the system folder.

Please use WST 4.2.2 thread next time
http://forum.xda-developers.com/showthread.php?t=329170

tx

[rakster007]

I have already posted this but so far no one has come back and I am getting in dire need to upgrade to WMP6. Basically i used lockiwiz to perform the unlock. Then I thought that i will use WST for backups. However when i click on CID Actions it is returning the following:

Decrypted stored sum: 65D57D5BBD55D8A6
Decrypted calcd sum: 2AC3CA3FD8FFA039

Checksums did NOT match!!
Could not determine a key index to decrypt it.

Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.

Device is a Wiza200:G4
IPL 2.21
SPL 2.21

many thanks

[serhiy_asd]

I phone i-mate SPL.
WST program does not work with my phone
http://i.piccy.info/i4/09/06/4434e34fe5f08e2a660cc0babd41.jpeg

[akemi]

This software is working with HTC T8585 (Leo) ? what versions of other software is needed?