Where i can get this files for KITL mode

[RIPin@]

According to the http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES i need to have "any valid signed dlls from a hermes/tytn device. You will need to copy that file 3 times and rename them to stk_service.dll, ril.dll and rilgsm.dll".

Please help me to find this files.

[Ninja1]

According to the http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES i need to have "any valid signed dlls from a hermes/tytn device. You will need to copy that file 3 times and rename them to stk_service.dll, ril.dll and rilgsm.dll".

Please help me to find this files.

It's this "file"...not "files". Grab a Hermes. Copy a valid dll three times. Rename each copy. Do the kitl thing.

Ninja1

[RIPin@]

Could you please clearify what do you mean by.
Grab Hermes.
Copy a valid dll three times. Rename each copy. Do the kitl thing.

Another problem is that i have bricked HTC Tytn.

[RIPin@]

Help me please.
Another problem is, where i can get Full Version of Microsoft Plaform CE 5.0.

[malrose]

Help me please.
Another problem is, where i can get Full Version of Microsoft Plaform CE 5.0.

http://www.microsoft.com/downloads/details.aspx?familyid=486E8250-D311-4F67-9FB3-23E8B8944F3E&displaylang=en

if you try this method, you dont need valid rills.dll,
Here you are just creating dummy rills. This method will take some 2-3hours to compile but it should get you out of the sh!t if you have no valid files..

this quote taken from JBO

"I've unbrick my phone!! Type 2 i think (stuck on windows screen).

I've used the superdave's method with Platform Builder. So, the steps:

- Download Windows CE 5.0 Trial Edition. It's a 2.6Mb file but others components will be downloaded during install (around 2 Gb for me, so be patient!). Choose to install ARMV4I processor platform (not the x86 selected by default).

- Run Platform Builder, File menu -> New Platform
Select "SAMSUNG SMDK2410: ARMV4I"

- Build OS menu -> check "Copy files to release directory after build"
- Build OS menu -> check "Make run-time image after build"
- Build OS menu -> click "Build and Sysgen"

One more time, be patient, tyhe compilation may take 20min.

After compilation successfull:
- Build OS menu -> Open Release Directory.
Copy 3 DLL's from this directory and paste in another (i.e. your Desktop). Rename them as stk_service.dll, ril.dll and rilgsm.dll
Copy the renamed DLL's back in the Release Directory

- Target menu -> Release Directory Modules -> Add the 3 DLL's

- Run your Hermes in KITL debug mode (COM MANAGER + POWER + RESET)

- In Platform Builder, Target menu -> Attach device

- Wait that the phone starts (may take 10min)

- You are in Windows Mobile !!

I had copy SSPL_HERM.exe to my MicroSD card before the operation. For that, I've used the SDcard adapter shipped with my MicroSD card and connect on a colleague PC with a 7-in-1 card reader.

So, once my phone was started, i've clicked SSPL_HERM, and after, I've followed the procedure for the pof' UNLOCKER v3.
Then flash a new ROM

So, for all who have an Hermes stuck on the windows screen, follow this method and unbrick it in 30min !!

Have a good day

PS: sorry for my approximative english!"

Mal..

[RIPin@]

malrose - thanks for your detail instructions.
I will try do this tomorrow.

[Zgembo]

i'm sorry, but this is very unclear to me...

Or, this KITL mode... I've never seen one on my phone so far, just can not activate it at all! :(
Anyone, please report, is KITL mode possible at all on DoCoMo and Softbank japanese ROMs...
Also, when one enters KITL mode using "healty" phone, what's displayed on screen?!?

sorry again.

[malrose]

i'm sorry, but this is very unclear to me...

Or, this KITL mode... I've never seen one on my phone so far, just can not activate it at all! :(
Anyone, please report, is KITL mode possible at all on DoCoMo and Softbank japanese ROMs...
Also, when one enters KITL mode using "healty" phone, what's displayed on screen?!?

sorry again.

Not all roms have kitl enabled. Press either power+comm+reset or comm+ok+reset..

[RIPin@]

I have just installed Microsoft CE 5.0.
Now try to do all you says.

[ketelhuis]

Hi,

I allready posted this in the Bricked Hermes Thread, but that thread is getting a bit busy ;)

When trying the method of Superdave as described in http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES i get:

3195 PID:39ceb52 TID:39ceb2e !ERROR: NK!SC_CreateLocalView: failed opening "\windows\wince.nls"; error=2. Expect boot failure!
3198 PID:39ceb52 TID:39ceb2e !ERROR: NK!SC_CreateLocalView: make sure "wince.nls" is present in your image.
3201 PID:39ceb52 TID:39ceb2e Data Abort: Thread=839ce8ec Proc=802b3410 'filesys.exe'
3202 PID:39ceb52 TID:39ceb2e AKY=00000003 PC=03f8e83c(coredll.dll+0x0002e83c) RA=03f8e814(coredll.dll+0x0002e814) BVA=04000000 FSR=00000007
3206 PID:39ceb52 TID:39ceb2e Data Abort: Thread=839ce8ec Proc=802b3410 'filesys.exe'
3208 PID:39ceb52 TID:39ceb2e AKY=00000003 PC=03f8e83c(coredll.dll+0x0002e83c) RA=03f8e814(coredll.dll+0x0002e814) BVA=04000000 FSR=00000007
3464 PID:39ceb52 TID:39ceb2e Data Abort: Thread=839ce8ec Proc=802b3410 'filesys.exe'
3466 PID:39ceb52 TID:39ceb2e AKY=00000003 PC=80016e5c(NK.EXE+0x00016e5c) RA=80016e3c(NK.EXE+0x00016e3c) BVA=03f31528 FSR=00000007

Any ideas of fixing this?

[RIPin@]

Ooohhh yeahhhhhhhhhhhhhh.
HTC Tytn was recovered.
Thank all for help.
This method realy works, when devices hang on Windows Mobile Screen.

[Rise]

hi
i try to open microsoft window ce 5.0 through my pc but it shows error and can't open
i also download .net framework but same problem shows
any solution that how to use this software

[romeu]

Not all roms have kitl enabled. Press either power+comm+reset or comm+ok+reset..

Where can I find a ROM that has KITL enebled. I've tried two different, none has.

[optyqus]

So how can I use this method if my hermes is not kitl enabled? In fact I have two dead hermes devices and I cannot enter in KITL mode on none of them. To flash other roms is impossible... as I'm writing this I'm installing on my pc the Win Ce platform builder and I really really hope not to waste time in trying this recovery method for two hermeses wich cannot start in kitl mode.

[dvdaio]

how to enable KTL MODE i can not enter this mode i tried
COMM manger - softreset
and
Comm manger - ok - soft reset
Comm manger - ok - power - softreset
all this is not work to me
why or how to enable this mode on my phone