PDA

View Full Version : Worms World Party on P3600


jamesbest77
4th March 2007, 04:22 PM
Hi,

For those of you who have spent their hard earnt cash on possibly the best game out there for the Pocket PC platform (Worms World Party) only to find that you cant assign buttons for Fire, Jump and Backflip, I came across a fix I found at 4pda.ru (http://4pda.ru/4218/). Here I give details (in english) on how to make this work with the P3600.

I have Worms World Party version 1.04. You'll need to edit the file WWPSave.dat (with a Hex Editor) in your WWP installation folder. The bytes at locations: 10B, 10C and 10D correspond to the keycodes for Fire, Jump and Backflip respectively. I believe the default values are each in the range of C1-CF.

I noticed not all buttons can be assigned, in particular the start, ok and center-D buttons on the P3600 (perhaps I have the wrong key-codes). If someone could confirm the following keycodes are correct, it would help a lot:

Windows Button = 0x5b
Left Menu Button (above green call button) = 0x70
Right Menu Button (above red call button) = 0x71
Green Call Button = 0x72
Red Call Button = 0x73
center-D Button = 0x0d
OK buttons (both) = 0x75
Camera Button = 0xc4
Voice Recorder Button (next to power button) = 0xc1

Anyway, I have attached a modified WWPSave.dat file which should work with the P3600. The keys are as follows:

Fire = Left Menu Button
Jump = Voice Recorder Button
BackFlip = Camera Button

Hope this helps someone out there :)

PS: I'm not trying in anyway to claim this fix is my own work. Its pretty difficult to find (via search engine) if you dont know what you're looking for, so I thought more publicity is needed.

lulyxs
4th March 2007, 07:30 PM
work on my dopod D810 finally i can play my favourite Game
big thanks

mihaig
5th March 2007, 09:43 AM
Works for me as well. Big thanks :)

wishmaster82
5th March 2007, 10:32 AM
where i can find the game ?

The_Stranger
6th March 2007, 09:10 AM
where i can find the game ?

Probably in a online shop somewhere....

warnysouth
7th March 2007, 01:27 AM
does anyone find that wwp loads in a small corner of the screen and not full screen?

W

Elchinator
18th March 2007, 04:10 PM
Tanks a lot, jamesbest77! On my Hermes only the "Backflip" button didn't work and there was no way to assign any of the available buttons. But with your list of keycodes I could manually assign it to the red phone button and now everything works perfectly!

machaco
23rd July 2007, 01:31 AM
can someone upload the wwpsave.dat for an htc touch? i dont know how to use the hex editor :s

PLZ

denizg
23rd July 2007, 06:10 AM
Probably in a online shop somewhere....

I've been looking for this game so long now. Could any one PLEASE at least give a shop name where we can get it?

Is it like "Worms World Part PDA Edition" or someting?

garuda50
24th July 2007, 02:40 AM
Quote:
Originally Posted by wishmaster82
where i can find the game ?



Just click here (http://forum.xda-developers.com/search.php)

hotplainrice
5th August 2007, 08:52 AM
I'm having problems with changing preferences. Anyone else experiencing this?

Im on Ax3L's WM6 ROM.

yapa
6th August 2007, 08:14 PM
Thanks a lot, but could you tell us how do you modify your wwpsave.dat? I would like to know because a have this file with some scores that i don't want to lose. Could you which program did you do this modifications?

Thanks
yapa

Neo88
6th February 2008, 08:05 PM
Hi

I have a htc touch and wwp version 1.0.3. Does anybody have a keyhack for version 1.0.3 so that i can use the camerabutton as teh firebutton?

thx

jamesbest77
7th February 2008, 02:21 PM
In the first post there's a link to the author who discovered the fix. In that post, if you scan through the Russian text, there's a link to a file called "img-4430-keycode.rar". Download it and extract and copy it to your phone. Run the program then press the camera button - this should give you the button's keycode.

Then follow the instructions as I've described....

landshark
7th February 2008, 04:50 PM
Quote:
Originally Posted by wishmaster82
where i can find the game ?



Just click here (http://forum.xda-developers.com/search.php)

Heh, outstanding! If you don't mind, I'm going to use that reply in a lot of places.....

jackle2110
29th March 2008, 08:15 AM
thanks alot.. now i can kick AI butt

Siroibex
11th June 2008, 07:56 PM
Hi

I have a htc touch and wwp version 1.0.3. Does anybody have a keyhack for version 1.0.3 so that i can use the camerabutton as teh firebutton?

thx

Hi @ll,

i modified the .DAT File....

now Worms World Party 1.0.4 is playable on HTC Touch.
The Back flip jump is deactivated, cause there are not enough Keys....
Your Fire Key is set on Camera Key!

Sorry for my bad English, i'm german.... :cool:

Please write an eMail to me, if you want the modified DAT File
sirocool [a] gmx [dot] net

xTMODx
4th July 2008, 02:24 PM
Hi,

For those of you who have spent their hard earnt cash on possibly the best game out there for the Pocket PC platform (Worms World Party) only to find that you cant assign buttons for Fire, Jump and Backflip, I came across a fix I found at 4pda.ru (http://4pda.ru/4218/). Here I give details (in english) on how to make this work with the P3600.

I have Worms World Party version 1.04. You'll need to edit the file WWPSave.dat (with a Hex Editor) in your WWP installation folder. The bytes at locations: 10B, 10C and 10D correspond to the keycodes for Fire, Jump and Backflip respectively. I believe the default values are each in the range of C1-CF.

I noticed not all buttons can be assigned, in particular the start, ok and center-D buttons on the P3600 (perhaps I have the wrong key-codes). If someone could confirm the following keycodes are correct, it would help a lot:

Windows Button = 0x5b
Left Menu Button (above green call button) = 0x70
Right Menu Button (above red call button) = 0x71
Green Call Button = 0x72
Red Call Button = 0x73
center-D Button = 0x0d
OK buttons (both) = 0x75
Camera Button = 0xc4
Voice Recorder Button (next to power button) = 0xc1

Anyway, I have attached a modified WWPSave.dat file which should work with the P3600. The keys are as follows:

Fire = Left Menu Button
Jump = Voice Recorder Button
BackFlip = Camera Button

Hope this helps someone out there :)

PS: I'm not trying in anyway to claim this fix is my own work. Its pretty difficult to find (via search engine) if you dont know what you're looking for, so I thought more publicity is needed.

i think "center-D Button = 0x0d" is not correct on my touch diamond is it "86" u can look it with "PocketSNES"

PS: here the save file for the HTC Touch Diamond

scottycam
12th July 2008, 11:54 PM
Thanks works on my Trinity fine. Cheers.

paultje_007
21st August 2008, 04:41 PM
Kan iemand mij helpen met een dat.file voor Worms World Party die ik kan spelen met m'n slider uit, {HTC Touch Pro/HTC Raphael 100} zodat ik de pijltjes toetsen kan gebruiken en bijvoorbeeld Fire = Enter , Jump = Spatie , en Backflip = B

Anders, kan iemand mij vertellen hoe ik dit uit kan zoeken?
Ik heb het programma HDD HEX Neo om het .dat file te ontcijferen.
Ik zie daar dat onder 0x000010a t/m 10d moet worden verandert om de knoppen Fire, Jump en Backflip te veranderen.

Bij de HTC Touch Diamond .dat file (thanks to xTMODx) zijn deze gewijzigt in 86, 75, 76, 01
Maar hoe weet ik welk nummer de slider-keys Enter, Spatie en B is?

Groet
Paultje_007

Ik heb inmiddel het progje van de russische site gedownload en dit heeft onderstaande nummers bij de keys gegeven:
Front keys:
Left, Right, Up, Down = 0x84 (132)
Center button = 0xD (13)
Hang Up = 0x73 (115)
Answer = 0x72 (114)
Back = 0x75 (117)
Volume Up = 0x75 (117)
Volume Down = 0x76 (118)

Slider Keys:
up = 0x26 (38)
down = 0x28 (40)
left = 0x25 (37)
right = 0x27 (39)
Enter = 0xD (13)
TAB = 0x9 (9)
Left shift = 0x10 (16) (press again = 0xE5 (229) )
Del = 0x8 (8)
CTRL = 0x11 (17)
Space and all other keys = 0xE5 (229)



Ik heb inmiddels al iets veranderd:
Ook heb ik het scherm omgedraaid om het beeld de richting te geven naar de slider toe (oftwel linkshandig).
De front center knop is Fire
Op de slider:
TAB = Jump
Up = link
Down = rechts
Left = omhoog
Right = omlaag

Download deze instelling met onderstaand bestand:

paultje_007
21st August 2008, 05:38 PM
Ik heb nu:
TAB = Jump
CTRL = Fire
SHIFT (L of R) = Backflip

Pijltjes doen nog steeds omgekeerd Left=Up Right=Down Up=Left Down=Right

For HTC Touch Pro here is the file to make slider keys function with WWP:
copy wwpsave.dat to your wwp install folder on your mobile and replace old one.
Put slider out before opening Worms World Party!!!!

Keys so far are:
TAB = Jump
CTRL = Fire
SHIFT (L or R) = Backflip

The arrow keys are reversed, sorry can't find code for that one: Left=Up Right=Down Up=Left Down=Right

paultje_007
21st August 2008, 05:40 PM
...........................

Neo_79
22nd August 2008, 01:51 PM
For Trinity I set & I test this button:

Left Menu Button (above green call button) = 0x70 - >Backflip
Right Menu Button (above red call button) = 0x71 - > Jump
center-D Button = 0x0d ->fire

muhlatte
23rd August 2008, 11:34 AM
sry for the stupid question, but how can i change the direction and how can i walk on my diamond? The files are already overwrited!
cheers

syto203
6th September 2008, 08:46 AM
hi guyz this is my first post here n i hope its a helpfull one
here is the wwpsave.dat file to make it work on htc cruise and might work on all htc touch (post ur feedback here)

first in the hex editor the places are 10A(fire), 10B(jump), 10C(backflip)
i used pocketGBA to get the buttons

fire: D-Pad Center 0x86
jump: left menu button 0xC1
backflip: right menu button 0xC2

Addicteddddd
9th September 2008, 07:01 PM
can someone change the savefile so fire = center button,
jump = volume up
backflip = volume down,
turn crosshair up = phone call end
turn crosshair down = phone call begin

thanks!

(for a HTC Diamond)

syto203
10th September 2008, 04:23 AM
can someone change the savefile so fire = center button,
jump = volume up
backflip = volume down,
turn crosshair up = phone call end
turn crosshair down = phone call begin

thanks!

(for a HTC Diamond)
i can do that for u but would u try the one i did jst to know if they have the same mapping as my cruise or u can jst download pocketgba n tell me the adresses.

joshrys
17th September 2008, 02:37 PM
I have a samsung i760 and can't seem to get the buttons to work. I've tried editing the dat file myself with the buttons i found using pocketSNES and also using some of the dat files posoted here, but no luck. Any suggestions?

NVM, the only buttons that would work were the volume up and down buttons and the center OK button. works now! :)

davidjohnfarmer
7th October 2008, 10:37 PM
Ik heb nu:
TAB = Jump
CTRL = Fire
SHIFT (L of R) = Backflip

Pijltjes doen nog steeds omgekeerd Left=Up Right=Down Up=Left Down=Right

For HTC Touch Pro here is the file to make slider keys function with WWP:
copy wwpsave.dat to your wwp install folder on your mobile and replace old one.
Put slider out before opening Worms World Party!!!!

Keys so far are:
TAB = Jump
CTRL = Fire
SHIFT (L or R) = Backflip

The arrow keys are reversed, sorry can't find code for that one: Left=Up Right=Down Up=Left Down=Right

Almost perfect! - just a shame about the arrow keys (i'm using a HTC touch pro)

shipuuden
10th October 2008, 04:42 PM
does anybody have a cab file of this?

the .dat doesn't work for me...please...i'm addicted to this game:(

Addicteddddd
10th October 2008, 10:47 PM
this is Not a warez forum, google it.

And btw, im Addicted, not you ;)

AntonyA
12th October 2008, 02:19 PM
Got a HTC Diamond and had the same control issues. Tried editing it, but didn't seem to work well - not sure what it was - probably my Hex editing skills! Used the file attached (WWPSave.dat) by xTMODx and worked a treat!

Thanks :D

A :cool:

neil_swann80
10th November 2008, 04:45 PM
i can do that for u but would u try the one i did jst to know if they have the same mapping as my cruise or u can jst download pocketgba n tell me the adresses.

fire = center button = 0xD
jump = volume up = 0x75
backflip = volume down = 0x76
turn crosshair up = phone call end = 0x73
turn crosshair down = phone call begin = 0x72

neil_swann80
11th November 2008, 09:59 AM
Got a HTC Diamond and had the same control issues. Tried editing it, but didn't seem to work well - not sure what it was - probably my Hex editing skills! Used the file attached (WWPSave.dat) by xTMODx and worked a treat!

Thanks :D

A :cool:

Where is this file/attachment? Can't see a poster called xTMODx in this thread?

EDIT: Ignore me, I found it! D'OH!

EDIT2: xTMODx's file works very nicely on the HTC Touch Pro also, saves using the slide-out keyboard.

neil_swann80
12th November 2008, 04:16 PM
i think "center-D Button = 0x0d" is not correct on my touch diamond is it "86" u can look it with "PocketSNES"

PS: here the save file for the HTC Touch Diamond

I've slightly modified xTMODx's dat as having the center-D button as fire is not convenient for me as I kept firing when trying to move and blowing my own worms up!

Action (changed to):
Fire = Volume up
Jump = Volume down
Center-D = Backflip

Movement (the same):
D-Up/Down = Aim Up/Down
D-Left/Right = Walk Left/Right

Will work on HTC Touch Diamond/Pro

catohcat
8th December 2008, 10:06 AM
Ik heb nu:
TAB = Jump
CTRL = Fire
SHIFT (L of R) = Backflip

Pijltjes doen nog steeds omgekeerd Left=Up Right=Down Up=Left Down=Right

For HTC Touch Pro here is the file to make slider keys function with WWP:
copy wwpsave.dat to your wwp install folder on your mobile and replace old one.
Put slider out before opening Worms World Party!!!!

Keys so far are:
TAB = Jump
CTRL = Fire
SHIFT (L or R) = Backflip

The arrow keys are reversed, sorry can't find code for that one: Left=Up Right=Down Up=Left Down=Right
This is great! But anyone can fix the arrow keys?

Godrockdj
19th January 2009, 05:58 PM
Firstly, I finally have WWP installed and working in beautiful full VGA screen on my Fuze. Hooray! :D

Question 1: From what I can see in the game it appears we can't modify worm team options as in the PC game? Like their accent, flags, etc. Or even create new worms and teams?


I've slightly modified xTMODx's dat as having the center-D button as fire is not convenient for me as I kept firing when trying to move and blowing my own worms up!

Action (changed to):
Fire = Volume up
Jump = Volume down
Center-D = Backflip

Movement (the same):
D-Up/Down = Aim Up/Down
D-Left/Right = Walk Left/Right

Will work on HTC Touch Diamond/Pro

And Question 2: While I can load and see the game, my worms can't do much besides walk around and aim. No idea what the actual jump/backflip/fire keys are but they won't work on the Fuze. So I looked to install this very helpful aforementioned dat file and found something unusual - there is no .dat file already present in my Worms install folder to replace....So I said "Huh" and just put it there anyways. When I next started the game, nothing had changed - no remapped keys. What gives?

If it helps, the game installed in the main directory, not program files or anything. Just \WWP. Also, I'm using the stock ROM...

metalmaus
6th May 2009, 02:09 PM
everything .dat are fine, but on my HTC Touch Pro, when I select something in setting of this game, confirm (tick) and cancel (cross) icons are not respond :(

sailer1983
10th May 2009, 05:00 PM
thanks for the trick. I like this game.

eddie.harun
23rd July 2009, 09:36 AM
someone please help me.........
i'm using htc touch 3G n already install WWP version 1.03.....
touch 3G hex button :
enter = 0x86
receive call = 0x72
end call = 0x73
up =0x26
down = 0x28
left = 0x25
right = 0x27
but still cant play due no fire button...
please help me on the WWPSave.dat

petzku
12th August 2009, 01:34 AM
Please could some one help me remapping the play keys to my hrodium? I'll buy couple of beers for who ever make the buttons work for rhodium. And maybe to use fullscreen? I've installed version 1.04.

TheRem
19th August 2009, 07:31 AM
For HTC Touch Viva (Opal)...

Take your pick...

For Vivas with WM6.1:
WWPSave_BACKFLIP.zip
0x86 (134) = Fire (D pad center)
0xE5 (229) = BackFlip (volume)

WWPSave_JUMP.zip
0x86 (134) = Fire (D pad center)
0xE5 (229) = Jump (volume)

For Vivas with WM6.5:
WWPSave_JUMP_BACKFLIP.zip
0x86 (134) = Fire (D pad center)
0x75 (117) = Jump (volume)
0x76 (118) = BackFlip (volume)

Just overwrite your existing WWPSave.dat.

mahonyyy
6th September 2009, 05:04 PM
I've slightly modified xTMODx's dat as having the center-D button as fire is not convenient for me as I kept firing when trying to move and blowing my own worms up!

Action (changed to):
Fire = Volume up
Jump = Volume down
Center-D = Backflip

Movement (the same):
D-Up/Down = Aim Up/Down
D-Left/Right = Walk Left/Right

Will work on HTC Touch Diamond/Pro

Hi,
I tried both, your's and xTMODx's savefile, but none of them worked on my Touch Diamond :( Do these files only work on version 1.04? Because I'm using 1.03? :confused:
I can start the game (and play - except from jump/fire) with the original savefile but with the modded ones the game always crashes when coming up to the menu-screen ...

Hope someone can help me with that - Worms rule :D

darkreborn
12th September 2009, 06:48 AM
Sorry but how do these file work? i have a fuze/toouch pro and i pasted the file but none of the keys changed:confused: do i have to download the hex editor because i cant find it

arnierulezz
9th December 2009, 05:19 PM
Ik heb nu:
TAB = Jump
CTRL = Fire
SHIFT (L of R) = Backflip

Pijltjes doen nog steeds omgekeerd Left=Up Right=Down Up=Left Down=Right

For HTC Touch Pro here is the file to make slider keys function with WWP:
copy wwpsave.dat to your wwp install folder on your mobile and replace old one.
Put slider out before opening Worms World Party!!!!

Keys so far are:
TAB = Jump
CTRL = Fire
SHIFT (L or R) = Backflip

The arrow keys are reversed, sorry can't find code for that one: Left=Up Right=Down Up=Left Down=Right

can someone upload the russian file so i can find the code for the keys i want to use
i can do everything else myself
and can someone please fix the arrow keys or give the number where the up down etc keys are stored

lolage
23rd July 2010, 08:39 AM
I d like to have one!

zdzichu7777
13th January 2011, 01:12 PM
I have HTC Diamond and i can`t set fire button and jump <Wwp ver 1.0.4>.
Did anyone find a solution?

Marky76
18th February 2011, 08:33 PM
For Trinity I set & I test this button:

Left Menu Button (above green call button) = 0x70 - >Backflip
Right Menu Button (above red call button) = 0x71 - > Jump
center-D Button = 0x0d ->fire

thank you very much
realy