Jwrightmcps Crossbow ROM Update 2.02.00 WWE

[itschemistry]

Hi just wanted to ask if its possible to Instal an I-Mate Jasjar rom on the XDA exec

and one more prob , i installed the rom And its great loving it the only thing is sometimes a message pops up saying Low Storage memory ( only showing 0.2mb free) where as i havnt got anything installed at all on the device , can any1 help please :(

Thanx

[aniel1]

I personally feel this is one of the best roms on the forum. Jwright hope to see your next rom with video call soon.And it should be another version.:)

[dadio22]

Hello,

I've got a strange problem. It happens when the battery is severely drained and my sd card can not be supported anymore because of it. When I recharge the battery I get the message Unknown usb device. You can input a name and then get unable too install USB device I haven't got the correct name in yet. But when that happens nothing works. You get a lot of errors.

The only thing that works is a soft reset. I'm happy that a soft reset brings it around but it is still annoying. Does someone else have that problem?

[iggi007]

G'day all.
Ok, I'm new to the forum but not to PC's / PPC's.
The installation of the ROM was a breeze, really. And playing with it the last couple of day's was even more fun - been running the stock latest release iMate JASJAR ROM till now. REALLY like the interface, really like the new app additions and generally everything about it. BUT; in my experience at least, she ain't that stable.

I only installed two apps HandySwitcher and MemMaid and no registry hacks and frankly, I was not impressed with the performance or the stability. Now after reading through the posts and getting the general feel I seem to be the only one… that speaks up anyway.

So, what am I missing? I would really like to use this new version as I like the interface and the added features but; being a full time user - this is my phone, diary, planner, toy, book case, document library and basically my life – I cant afford to boot in the middle of a mail or sit and wonder if I will ever get out of this freeze.

How about it, am I missing something?

PS. Just finished loading ROM 1.30.76 and my it's ugly...

[marcDVDer]

I recently changed from the WM5 to the WM6 Crossbow.
I found out that I often accedently delete mails and SMS messages, because the WM5 Outlook left Softkey was "New" message.
But know they have changed that to "Delete"... why does Microsoft changes something like that suddenly?

Is there a way to change this back to "new" in the registry for example? I don't find settings to be able to control the default softkey behavior for Outlook to do this from the menu for example.

[cktlcmd]

G'day all.

PS. Just finished loading ROM 1.30.76 and my it's ugly...

I'd suggest you look for the QTEK ROM 1.30.77 or the TMobile ROM 1.30.115

Better than the IMate ROMs, plus they both support A2DP, if you use BT Stereo. I don't think IMate released a version with A2DP support.

[iggi007]

Thanks for the reply cktlcmd, but I think you misunderstood: the ROM I was referring to that i installed is Jwrightmcps Crossbow ROM Update 2.02.00 WWE.

My PS statement was simply an observation of the iMatae ROM I had to revert to after all my stated problems with Jwrightmcps's ROM...

[Goldry]

Thanks for the reply cktlcmd, but I think you misunderstood: the ROM I was referring to that i installed is Jwrightmcps Crossbow ROM Update 2.02.00 WWE.

My PS statement was simply an observation of the iMatae ROM I had to revert to after all my stated problems with Jwrightmcps's ROM...

I guess you're in the minority - not that that's a consolation!

Unless someone here has a bright idea I think there are only three things you can try:

1) Try a different version of the Radio. I can't really help with a surefire winner here because it seems to depend on who you are with and where you are, but 1.09, 1.13 and 1.15 all have their fans. You should be able to get the Radio ROMs on the FTP site. I'm using 1.15 and I'm very pleased with it, but YMMV.

2) Do a hard reset - hold down both soft keys on the keyboard and poke the reset hole with the stylus. Then at the prompt press 0 for a reset to factory defaults. This will give you a clean copy of the ROM.

3) Reflash the ROM. I know it sounds silly, but it can work. Just don't connect your phone to the PC through a USB hub!


G

[aniel1]

I'd suggest you look for the QTEK ROM 1.30.77 or the TMobile ROM 1.30.115

Better than the IMate ROMs, plus they both support A2DP, if you use BT Stereo. I don't think IMate released a version with A2DP support.

hi . will it work on imate jasjar? do have a copy of the rom as per your signature or a link. I would like to have that as a final backup copy if all goes too bad.:)

[casouzaj]

Hello,

I've got a strange problem. It happens when the battery is severely drained and my sd card can not be supported anymore because of it. When I recharge the battery I get the message Unknown usb device. You can input a name and then get unable too install USB device I haven't got the correct name in yet. But when that happens nothing works. You get a lot of errors.

The only thing that works is a soft reset. I'm happy that a soft reset brings it around but it is still annoying. Does someone else have that problem?

Hi dadio22,

Yes, I do experience such an issue sometimes, the last one being some 3 days ago, but, unforunately, I don't have a solution for it.

I noticed it first in J's 2.01.06 ROM, but it keeps showing up in 2.02.00. It starts just the way you have reported, but if you tried to play a little bit with it, perhaps you might have noticed the very strange behaviour I have posted on that old ROM's thread, which you could find at http://forum.xda-developers.com/showpost.php?p=1164485&postcount=868. It is really annoying !

I hope Jwrightmcps is able to track its causes down for his next release.

Cheers !

Carlos

[dadio22]

Heey,

I tries 2.01.06 for a few weeks and not once did i get the unknown usb device error. And I always plug in my phone on the net when i absolutely need to.

So I'm a little stumped as too what the problem is. I heard rumors about new roms coming from t-mobile (my provider) for the device but haven't heard it from anyone else. The roms were AKU 3.3 and a crossbow rom.

anybody know if it's true??

[marcDVDer]

I had the same thing happening while deleting a few hundred megabytes from the SD card. Suddenly my screen went totally white, and the SD card was not recognised until a second soft-reset. My IMate JasJar was connected to the charger, it had nothing to do with the battery in my case.
Works fine again after the soft-resets.

[cktlcmd]

hi . will it work on imate jasjar? do have a copy of the rom as per your signature or a link. I would like to have that as a final backup copy if all goes too bad.:)

Hi,

Here is the TMobile NL link: http://www.t-mobile.nl/zakelijk/htdocs/page/service/hardware_updates/mda_pro_update.aspx

I am tired of trying WM6 ROMs. I want something I can depend on. So I went back to the Official WM5 ROM.

[cktlcmd]

Thanks for the reply cktlcmd, but I think you misunderstood: the ROM I was referring to that i installed is Jwrightmcps Crossbow ROM Update 2.02.00 WWE.

My PS statement was simply an observation of the iMatae ROM I had to revert to after all my stated problems with Jwrightmcps's ROM...

Yes, I undersdtood you correctly, that is why I suggested the 2 Official WM5 ROMs from 2 different operators, because IMHO, those 2 are better than the latest IMate Official WM5 ROM you posted you want to revert back into.

[grayme]

I am tired of trying WM6 ROMs. I want something I can depend on. So I went back to the Official WM5 ROM.

I know what you mean, I made my own WM6 (I figured that nobody else was going to make me a ROM that had what I wanted and not things I didn't) :)

[cktlcmd]

I know what you mean, I made my own WM6 (I figured that nobody else was going to make me a ROM that had what I wanted and just what I wanted) :)

WM6 is good and stable with the following ROMs I tried: Dark Force, JWright, PDAViet, Helmi, and any ROM based on Helmi's ROM Cooker (like yours and Laurentius). My gripe is the instability of switching from GPRS. All WM6 I tried had the same problem. WM5 don't have it. So rather than spend time performing a soft reset just so I can reconnect to GPRS without any problem, I downgraded to a ROM I know I can depend on so as not to loose the connection. I also tried different radio ROMs with WM6, but to no avail. The only combination that I found works is WM5 and any radio ROM. Now, I'm happy again. :D

[wout]

WM6 is good and stable with the following ROMs I tried: Dark Force, JWright, PDAViet, Helmi, and any ROM based on Helmi's ROM Cooker (like yours and Laurentius). My gripe is the instability of switching from GPRS. All WM6 I tried had the same problem. WM5 don't have it. So rather than spend time performing a soft reset just so I can reconnect to GPRS without any problem, I downgraded to a ROM I know I can depend on so as not to loose the connection. I also tried different radio ROMs with WM6, but to no avail. The only combination that I found works is WM5 and any radio ROM. Now, I'm happy again. :D

Hi Cktlcmd,

I have the same problem with gprs/umts not connecting/switching.

please do as I do and install "profiles for Windows"
search the net ppcwarez.org for instance, and look for filename pwm_eng.

THIS really works great !!
changing from gprs connection to umts WITHOUT having to softreset !

greetings,

Wout

(or drop me a pm. for emailing)

[cktlcmd]

Hi Cktlcmd,

I have the same problem with gprs/umts not connecting/switching.

please do as I do and install "profiles for Windows"
search the net ppcwarez.org for instance, and look for filename pwm_eng.

THIS really works great !!
changing from gprs connection to umts WITHOUT having to softreset !

greetings,

Wout

(or drop me a pm. for emailing)

Thanks for the tip, I'll check it out. Can this application allow automatic switching, for example if GPRS is down, will it automatically switch to UMTS without to manually press any button?

[aniel1]

Hi,

Here is the TMobile NL link: http://www.t-mobile.nl/zakelijk/htdocs/page/service/hardware_updates/mda_pro_update.aspx

I am tired of trying WM6 ROMs. I want something I can depend on. So I went back to the Official WM5 ROM.

Thanks. Is there an English link to it and will it be compatible with Imate Jasjar. On 2nd thoughts I too am thinking on moving back to WM5.:rolleyes:

[wout]

Thanks for the tip, I'll check it out. Can this application allow automatic switching, for example if GPRS is down, will it automatically switch to UMTS without to manually press any button?


Yes !

you can choose "use GSM band only" in low coverage areas.
and it works in auto mode if you don't choose "gsm band only"

(you can also let it switch do different "profiles" at pre determined time )

small cab file of 316kb.

grt.

Wout

[cktlcmd]

Thanks. Is there an English link to it and will it be compatible with Imate Jasjar. On 2nd thoughts I too am thinking on moving back to WM5.:rolleyes:

I believe that is already the WWE ROM, although the link is not in English.

[cktlcmd]

Yes !

you can choose "use GSM band only" in low coverage areas.
and it works in auto mode if you don't choose "gsm band only"

(you can also let it switch do different "profiles" at pre determined time )

small cab file of 316kb.

grt.

Wout

Thanks.

I hope the next WM6 version should include this app if they can't solve that built-in issue.

[aniel1]

I believe that is already the WWE ROM, although the link is not in English.

Thank you cktlcmd. You have been great help. I only hope it will work on my jasjar.:)

[arnab]

:) AWSOME DUDE KEEEP IT UP...I SAW THE BETA OF VIDEOCALLING FUNCTION IT HAS GOT SOME BUGS...CN U GUYS TELL ME WHEN IS THE FINAL VERSION OF THE VIDEOCALL FEATURE WILL BE AVAILABLE ??????:D CHEEERS JwRIGHTS

[HeadgeaR]

I have a problem with a Spanish Qtek 9000, i download the crossbow rom for Qtek 9000 and have a country ID error when i proccess to install...

How to install this release????

Thanks.

[aniel1]

I have a problem with a Spanish Qtek 9000, i download the crossbow rom for Qtek 9000 and have a country ID error when i proccess to install...

How to install this release????

Thanks.

All help and methods are in the WIKI

Check it out.;)

[aniel1]

:) AWSOME DUDE KEEEP IT UP...I SAW THE BETA OF VIDEOCALLING FUNCTION IT HAS GOT SOME BUGS...CN U GUYS TELL ME WHEN IS THE FINAL VERSION OF THE VIDEOCALL FEATURE WILL BE AVAILABLE ??????:D CHEEERS JwRIGHTS

Still under development but will be out soon with the next update. Stay tuned.:)

[HeadgeaR]

All help and methods are in the WIKI

Check it out.;)


The problem are this rom all are a unique "FILE".EXE cant use MaUpgradeUt_noID.exe....

[southernint3l]

The problem are this rom all are a unique "FILE".EXE cant use MaUpgradeUt_noID.exe....

Actually you can use the upgrade tool if need be.You just need to follow directions.I will be honest.I have had my JasJar for a year now and bricked it 1 time,how and why?NOT READING THE DIRECTIONS!I let my jasjar actually sit for a few months untouched and unused since december from the last JW upgrade.When i got the word that there was another ROM upgrade to WM6,what did i do?Tried to install the new ROM using an external hub (which i know myself was and is a NO NO!!)and bricked my device.After a a couple of hours of reading,finally figured out that it was my own fault.Taking the time to read the wiki pages are very useful and some if not all questions are answered here on the forum in a more than timely fashion.If you are new to upgrading your device,and you are unsure about something,ASK BEFORE YOU DO IT!Because once you start upgrading,this voids your precious warrenty.So take the time to ask and read posts before upgrading and pointing fingers at someone that is bringing nothing but the best to the table.My hats off to you JW!Aniel1-i have been very busy my friend,glad to see that you are still very active here in the forums!
Regards

[aniel1]

.Aniel1-i have been very busy my friend,glad to see that you are still very active here in the forums!
Regards

I am indeed glad to see yousouthernint3l. You have been missing for a while. There is lots happening in here.:)

[pride429]

Thank you so much for this fantastic ROM. I was very nearly going to dump my M5000 as there are no obvious upgrades for this otherwise superb phone but this ROM update has refreshed my interest in keeping this phone. It seems faster than the old Orange ROM and I love all the new found functionality (having voice command as standard is great!).

Looking forward to any updates that may be coming.

Great work!!

[almerchant]

Hi John
Great To have u back
There is no greater cheer in one as talented as you to be among us
I installed yr new rom, It was going great but i forgot to take out the Mem card and it stalled, stuck at BL screen did a MTTY and re started the procedure, this time around i was in the car and my Laptop battery died on me :(,well there i was with a semi finished JJ and i did a MTTY (set 14 0)again and this time went on smoothly. I face a strange problem my Radio seems to skip and fade out frequently, Is this a common problem. I cant place my hands on yr older AKU3.2 ROM as well so i cant downgrade as well.
Any help or suggestions would be appreciated. Even if u dont I am looking around..
Thanx for doing such a great job for a multitude of PPC afficiondos
Bye
Almerchant

[iggi007]

Goldry Quote:

I guess you're in the minority - not that that's a consolation!

Thanks for the reply Goldry. I did not think of doing a hard boot, surely will. I'm going to load the Jwrightmcps ROM again and try this, failing which I will try a couple of radio ROM's

cktlcmd Quote:

Yes, I undersdtood you correctly, that

Thanks for the reply cktlcmd .
Even though I'm back om the - fairly - stable WM5 relase I got the phone with I migt look at this in case I cant get my Jwrightmcps ROM stable enough.

chat soon.

[pride429]

Anyone know what the settings are for the UK contract SPV 5000 MMS settings? I can't exactly ask Orange themselves due to what using this superb ROM.

[Goldry]

Anyone know what the settings are for the UK contract SPV 5000 MMS settings? I can't exactly ask Orange themselves due to what using this superb ROM.

Off-topic, I know, but here's a link to a software downloads page for the HTC P3600. Scroll down the page for the Network Settings Wizards. I downloaded the UK wizard which works perfectly on the Universal, at least for O2. I'm pretty certain that Orange's settings are in there too.

http://www.europe.htc.com/support/software/htcp3600.html


G

[pride429]

Thanks for that - everything is now 100% and functioning. Superb!! Well pleased!!!

[robertwebbe]

Today I received the HTC S710, since today it is available in The Netherlands at BelCompany stores.

So, now the first official WM6 devices are on the market! Let's hope there will be better ROM updates soon available.

The versions on this S710 (smartphone) are:
Windows Mobile 6 Standard
CE OS: 5.2.1235 (Build 17740.0.2.0)

[aniel1]

Today I received the HTC S710, since today it is available in The Netherlands at BelCompany stores.

So, now the first official WM6 devices are on the market! Let's hope there will be better ROM updates soon available.

The versions on this S710 (smartphone) are:
Windows Mobile 6 Standard
CE OS: 5.2.1235 (Build 17740.0.2.0)

or one can use some tool already mentioned in the forum to extract the wm6 rom and the developers can then cook it for the universal.:)

[blueivy]

Hi,

I'm hoping somebody can help me with this bizarre problem.

My voicemail key no longer works after flashing this rom (and DARK FORCE WM6 ROM). I've now found out why and i'm hoping somebody can point me in the right direction AND hope that if anybody has the same problem this will help them.

My voicemail access number is +440697.... It's set in the phone correctly. However when using this ROM and the Dark Force ROM, the number ACTUALLY dialled is +44697 (ie. no 0 after the +44). This causes me not to have access to my voicemail (I get the response 'you have dialled an incorrect number').

I flashed the latest T-Mobile ROM back onto my phone and the voicemail access number is again the same +440697... HOWEVER, when I dial this it actually dials +440697 (ie. it does dial the 0 after the +44). I can then access voicemail every time.

So the problem is that one little 0 - however I have no idea what is causing the phone to skip it. Dialing rules somewhere that deletes the 0? But where!!?!?

Anybody any ideas at all? Any help? Anything? I really don't want to have to go back to Helmi's old ROM (which worked fine) or the T-Mobile ROM (which is full of crap as we all know).

[sultanholland]

hi every body i am in big trouble , i will really appreciate if any body could help me

please please.
i bought new mda t-mobile compact 3
yesterday i find in this page to upgrade

tom-art_v2.0for this

i upgrade ram artimes

when i upgrading it says you are sucessesfully upgraded.
my version is ipl - 1.13.000
spl-1.13
gsm-2.49.90
os - 1.13.00

after upgrading only rom changes os - 1.28.00

then my mda hangs in boot. i really dont know what to do
please any body can help me
my email basha_k3@hotmail.com


i heard in this xda- developers so many brilliant is there pls help me

thanks

basha

[jrronimo]

Hi and welcome!

The T-Mobile MDA Compact III is NOT an HTC Universal. This means you flashed it with a ROM for a completely different device... no wonder it hangs. I think that phone is known as the HTC Artemis.

What you will need to do is to re-flash your phone with a ROM meant for it. Since the phone at least starts to boot, I think you will be successful. For a WM6 ROM, You will want to go to this thread (http://forum.xda-developers.com/showthread.php?t=302955).

I don't know how to put your phone into bootloader mode, but that is probably what you'll have to do.

Good luck!

[blueivy]

Hi,

I'm hoping somebody can help me with this bizarre problem.

My voicemail key no longer works after flashing this rom (and DARK FORCE WM6 ROM). I've now found out why and i'm hoping somebody can point me in the right direction AND hope that if anybody has the same problem this will help them.

My voicemail access number is +440697.... It's set in the phone correctly. However when using this ROM and the Dark Force ROM, the number ACTUALLY dialled is +44697 (ie. no 0 after the +44). This causes me not to have access to my voicemail (I get the response 'you have dialled an incorrect number').

I flashed the latest T-Mobile ROM back onto my phone and the voicemail access number is again the same +440697... HOWEVER, when I dial this it actually dials +440697 (ie. it does dial the 0 after the +44). I can then access voicemail every time.

So the problem is that one little 0 - however I have no idea what is causing the phone to skip it. Dialing rules somewhere that deletes the 0? But where!!?!?

Anybody any ideas at all? Any help? Anything? I really don't want to have to go back to Helmi's old ROM (which worked fine) or the T-Mobile ROM (which is full of crap as we all know).

Anybody help? If not I'll need to go back to WM5 ROM's as they appear to work (at least the two I've tried have).

Maybe it's a phone pad problem (and I also HATE the new dial/phone pad - where is the contacts button?!?!))

[grayme]

Anybody help? If not I'll need to go back to WM5 ROM's as they appear to work (at least the two I've tried have).

Maybe it's a phone pad problem (and I also HATE the new dial/phone pad - where is the contacts button?!?!))

Have you tried using just 0697 as the voicemail number? (on O2 I just use 901)

Is it removing the 0 as it follows the UK dialing tone?

[blueivy]

Have you tried using just 0697 as the voicemail number? (on O2 I just use 901)

Is it removing the 0 as it follows the UK dialing tone?

Thanks for replying. There was a typo - my voicemail number starts 066, but anyway, the rest is still relevant.

I've tried:

0667
066

and in these cases the phone actually dials 0667 and 066. When I dial +440667... (either manually or by pressing the voicemail button) the phone shows +44667 (ie. the 0 is missing). When the call ends it shows 'Last call +440667...' (ie. the 0 is there).

So the phone is actually accepting +440667 but when it comes to actually dialling, it's removing the 0.

This to me sounds a bit like dialling rules (ie. skip the 0 after a +44 which is normal as it you're dialling a number in the UK from abroad, you do skip the 0).

I didn't know you could get dialling rules for normal numbers and the dialling rules under Connections is turned off, although I don't think these are applicable anyway.

I am at a complete loss as to what is going on. My phone isn't anything different from other MDA Pro's. I've flashed it and reflashed it. I've went from WM6 to WM5 and back the way and the two WM6 ROM's I've tried have this problem. The two WM5 ROM's I've tried (Helmi's and T-Mobile official one) work as they should!

[jasonkruys]

On t-mobile UK, if you dial your own mobile number from your number ie 0793xxxxxxx, then you will reach your voicemail. This is what I have done to overcome the problem until it gets fixed.

[grayme]

Some numbers I have in my contacts begin +4477xxx and they get through fine.

Have you simply tried dialing the voicemail number without the +44? (sorry, I can't see if you have from your post)

[grayme]

On t-mobile UK, if you dial your own mobile number from your number ie 0793xxxxxxx, then you will reach your voicemail. This is what I have done to overcome the problem until it gets fixed.

I just tried on my O2, I got to leave a message as the other person was unable to take my call! :D

Virgin used to have a number that you put in front of your whole number less the 0, +44065, I wonder if that would become +4465 on WM6?

[blueivy]

On t-mobile UK, if you dial your own mobile number from your number ie 0793xxxxxxx, then you will reach your voicemail. This is what I have done to overcome the problem until it gets fixed.

So it is a problem for all UK T-Mobile users! Why didn't anybody pipe up before now!

Anyway, thanks for that. It does appear to work. Thank **** for that!

Now that I know it's not just me, how do I submit this as a bug?!

[blueivy]

Some numbers I have in my contacts begin +4477xxx and they get through fine.

Have you simply tried dialing the voicemail number without the +44? (sorry, I can't see if you have from your post)

Not sure why that is. I've only tried the voicemail number and that's not working.

I have tried dialling the voicemail number without the +44 and it doesn't work.

[grayme]

Now that I know it's not just me, how do I submit this as a bug?!

You could PM Jwrightmcps, but he's seemed a bit busy of late (maybe he's got a new toy?) ;)

I just pushed and held 1 the first time I flashed and it asked if I wanted 901, I guess I could have put in anything.

[mavrik64]

So it is a problem for all UK T-Mobile users! Why didn't anybody pipe up before now!

Anyway, thanks for that. It does appear to work. Thank **** for that!

Now that I know it's not just me, how do I submit this as a bug?!

Mate, I don't know what your going on about. My XDA Exec loaded with this Jwrightsmcps WM6 rom has not had any probs with voicmail. I just press and hold 1 and it calls voicemail (T-Mob). All I did was select T-Mob during set up and all has been well.

Mav

[mavrik64]

In fact, I have got to say thanks to Jwrightmcps for an excelent effort. I held off upgrading from Helmi's AKU3.5 for a while, but took the plunge a couple of weeks ago. Bloody glad I did now. Works a treat. Not had to reset as often as I did b4 (touch wood).

Many thanks

Mav

[blueivy]

Mate, I don't know what your going on about. My XDA Exec loaded with this Jwrightsmcps WM6 rom has not had any probs with voicmail. I just press and hold 1 and it calls voicemail (T-Mob). All I did was select T-Mob during set up and all has been well.

Mav

Mav,

I'm not sure if you meant that to sound quite as confrontational, but it did! If you read the original post you'd know what I was 'going on about'.

I've done everything you've just mentioned (installed T-Mobile UK when the ROM finished) and it doesn't work. As I said it keeps missing out the 0 after the +44.

Maybe your phone dials your mobile number when you press voicemail, which as some kind soul pointed out, actually works. That's what I'm using now.

I'm glad yours works. Mine doesn't. That's why I'm looking for help. As I've pointed out this is the second WM6 ROM I've tried that does this so it's obviously not the ROM that's the problem (unless they are both based on the same base ROM) but probably WM6.

[blueivy]

In fact, I have got to say thanks to Jwrightmcps for an excelent effort. I held off upgrading from Helmi's AKU3.5 for a while, but took the plunge a couple of weeks ago. Bloody glad I did now. Works a treat. Not had to reset as often as I did b4 (touch wood).

Many thanks

Mav

So have I. It is one of the best ROM's I've used (but then this is only my fourth so maybe my opinion doesn't count).

It works a treat although I hate the new dial pad, but that's WM6's fault not Jwrightmcps's!

Keep up the good work. I'll PM him about the problem I've been discussing!

[Darthbelmont]

So have I. It is one of the best ROM's I've used (but then this is only my fourth so maybe my opinion doesn't count).

It works a treat although I hate the new dial pad, but that's WM6's fault not Jwrightmcps's!

Keep up the good work. I'll PM him about the problem I've been discussing!

jejeje another dial pad

[jasonkruys]

I'm fairly certain that problem has been reported, and confirmed, previously...no harm in reporting it again just in case..:)
Also worth noting is that I think the voicemail number is taken from the simcard, not from the settings cab at the end of setup.It is probably that Mav's voicemail number doesn't start with +44050xxxxx or whatever, possibly just his own mobile number as suggested

[a3b]

jejeje another dial pad

Can you show some screenshots of the dialpad ?

[aragorn771]

I'm fairly certain that problem has been reported, and confirmed, previously...no harm in reporting it again just in case..:)
Also worth noting is that I think the voicemail number is taken from the simcard, not from the settings cab at the end of setup.It is probably that Mav's voicemail number doesn't start with +44050xxxxx or whatever, possibly just his own mobile number as suggested

I had the problem with the voicemail too, here in U.S....talked to T-Mobile and re-entered the number voice mail has to dial...no problems since.

[blueivy]

I had the problem with the voicemail too, here in U.S....talked to T-Mobile and re-entered the number voice mail has to dial...no problems since.

Hi,

I spoke to T-Mobile here in the UK as I did think it was a problem at their end. They did fob me off with 'we have a problem with our voicemail system today if you try again tomorrow it will be okay'. When I told the guy at the other end this had in fact been going on for weeks, he didn't quite know what to say :-)

[grayme]

I used to be on Orange with a Nokia and got terrible reception.

I called over six times about it over several weeks, each time there was a temporary problem with a local transmitter. :rolleyes:

I'm not with them anymore and won't go back.

[Darthbelmont]

Can you show some screenshots of the dialpad ?

jeje there is!!

[ashishpalsingh]

hi ive got a O2 exec

ROM version 1.90.96 WWE
radio version 1.13.00
ext rom 1.95.05 WWE

wts the latest ROM that i can upgrade it too, moreover last time i upgraded to this rom my batt went for a toss, and i had to get a new one. While upgrading it was fully charged, think was because of batt meter or something, so what precautions can i take for the same

[Jwrightmcps]

Guys,

I have finally finished the next release 2.02.02 WWE.

I will be posting it on Monday in a new thread "Jwrightmcps Crossbow ROM Update 2.02.02 WWE". So keep your eyes open...

Take care,

-Jwrightmcps

Below is the change log for those that are interested:

Added support pages for HTC applications (help files).
Added extra ring tones (including "OldPhone").
Added extra themes.
Added backlight button assignment.
Added support for "Flight" mode (via Comm Manager).
Corrected password lockout issue.
Corrected button assignment for record button (press & hold).
Corrected Microsoft Voice Command startup issue.
Corrected "Remote SIM Access" service startup issue.
Corrected GPRS resume from standby issue.
Corrected lock-up on soft-reset issue.
Corrected default notification sounds.
Corrected storage card encryption feature.
Corrected phone call waiting issue.
Enabled ClearType as default font.
Improved Comm Manager application.
Improved power management.
Improved phone application response times.
Improved system response time and stability.
Replaced ClearVue PDF viewer with Adobe Reader LE.
Updated Java MIDlet Manager with new icons.
Updated HTC Zip application with new icons.
Updated Microsoft Office applications with new icons.

[willy792003]

Guys,

I have finally finished the next release 2.02.02 WWE.

I will be posting it on Monday in a new thread "Jwrightmcps Crossbow ROM Update 2.02.02 WWE". So keep your eyes open...

Take care,

-Jwrightmcps

Below is the change log for those that are interested:

Added support pages for HTC applications (help files).
Added extra ring tones (including "OldPhone").
Added extra themes.
Added backlight button assignment.
Added support for "Flight" mode (via Comm Manager).
Corrected password lockout issue.
Corrected button assignment for record button (press & hold).
Corrected Microsoft Voice Command startup issue.
Corrected "Remote SIM Access" service startup issue.
Corrected GPRS resume from standby issue.
Corrected lock-up on soft-reset issue.
Corrected default notification sounds.
Corrected storage card encryption feature.
Corrected phone call waiting issue.
Enabled ClearType as default font.
Improved Comm Manager application.
Improved power management.
Improved phone application response times.
Improved system response time and stability.
Replaced ClearVue PDF viewer with Adobe Reader LE.
Updated Java MIDlet Manager with new icons.
Updated HTC Zip application with new icons.
Updated Microsoft Office applications with new icons.

great news jwright! btw, is it based on newer os (>5.2.318)?

[Jwrightmcps]

great news jwright! btw, is it based on newer os (>5.2.318)?

No it is the same core: 5.2.318

I did look into the 5.2.1413 but found it to be fake. So sorry guys no new core yet...

However the core we have is working good now (except video calling) :)

-Jwrightmcps

[tailazoom]

Nothing about bluetooth problems?

[Jwrightmcps]

All I have released 2.02.02 WWE!

the thread can be found here:

http://forum.xda-developers.com/showthread.php?t=303685

please post any questions or issues about version 2.02.02 there...


Enjoy,

-Jwrightmcps

[aniel1]

No it is the same core: 5.2.318

I did look into the 5.2.1413 but found it to be fake. So sorry guys no new core yet...

However the core we have is working good now (except video calling) :)

-Jwrightmcps

Great Going -J. We have faith in you. :)

[tailazoom]

Bluetooth went off in 20 minutes

[mavrik64]

Mav,

I'm not sure if you meant that to sound quite as confrontational, but it did!

Sorry mate, It was not ment to be confrontational. (funny, I have the same problem at work too, mabey time to take a chill pill!).
FYI, when using the international format for CLIs, you always miss out the first 0 in the actual CLI. So, 0044(0)77300..... or +4477300.... are one and the same, the first 0 of the actual CLI (077300...)is not dialed. Just verified this on my XDA, it dials +44795300...
My XDA is not dialing it's own number to get to voicemale.

Does this help at all

Rgds

Mav

[grayme]

Have you tried +440077300 to access voicemail; maybe you end up with +44077300 when it calls? :)

[grusvs]

hi every body
I have I-MATE JASJAR AND I wanna update all system.. what can I do ?

ROM VERSION :1.30.76 WWE
ROME DATE : 02/20/06
RADIO VERSION : 1.09.00
PROTOCOL VERSION : 42.42.P8
ExtROM VERSION : 1.30.164 WWE

SAVAS TOYATA

[hrb]

hi every body
I have I-MATE JASJAR AND I wanna update all system.. what can I do ?

ROM VERSION :1.30.76 WWE
ROME DATE : 02/20/06
RADIO VERSION : 1.09.00
PROTOCOL VERSION : 42.42.P8
ExtROM VERSION : 1.30.164 WWE

SAVAS TOYATA

Go here and READ !

http://wiki.xda-developers.com/index.php?pagename=HTC_Universal

Cheers

[peak_99999]

Hi Jwrightmcps,

Thanks so much for sharing this I've download it already.:)

However, I've trouble to upgrade to my O2 XDAii. I did follow instruction dialog box but it keep return error that no device was detect!!:(

I did hard reset and place it on credle but somehow still no detect!! What step did I miss??? If it not much troublesome for you, could you please tell me why I can't upgrage to my O2?

version I download: XDA-EXEC_WWE_20200_203005_11300.zip

please help! anyone?

[grayme]

Hi Jwrightmcps,

Thanks so much for sharing this I've download it already.:)

However, I've trouble to upgrade to my O2 XDAii. I did follow instruction dialog box but it keep return error that no device was detect!!:(

I did hard reset and place it on credle but somehow still no detect!! What step did I miss??? If it not much troublesome for you, could you please tell me why I can't upgrage to my O2?

version I download: XDA-EXEC_WWE_20200_203005_11300.zip

please help! anyone?

This is not for your device; yours is not a universal. Go to the forum root and look for yours.

[peak_99999]

This is not for your device; yours is not a universal. Go to the forum root and look for yours.

:) Hi! Grayme, thanx for the advice but which version I suppose to search for? Could you pls advice? :D

[grayme]

:) Hi! Grayme, thanx for the advice but which version I suppose to search for? Could you pls advice? :D

I advise you go here http://forum.xda-developers.com/index.php and look for XDA II and before you touch your machine read this http://wiki.xda-developers.com/index.php?pagename=Himalaya.

[peak_99999]

I advise you go here http://forum.xda-developers.com/index.php and look for XDA II and before you touch your machine read this http://wiki.xda-developers.com/index.php?pagename=Himalaya.

:eek: WoW!! Thanx Grayme for your quick reply. I'm now into the right place :) Thanx again for the advise :o

[rugbug]

I need some proper help here!

Have tried to install this ROM update as per your instructions, to the letter, on my O2 Xda Exec, but the phone has just gone black and lost the connection with ActiveSync and now I cannot re-connect as the device is no longer recognised as it has been wiped!!!

How can I re-install the ROM in this situation, with ActiveSync no longer recognising the phone and with the phone in this state?

Bit peeved, hoping you can help.

Many thanks.

Tim.

[grayme]

I need some proper help here!

Have tried to install this ROM update as per your instructions, to the letter, on my O2 Xda Exec, but the phone has just gone black and lost the connection with ActiveSync and now I cannot re-connect as the device is no longer recognised as it has been wiped!!!

How can I re-install the ROM in this situation, with ActiveSync no longer recognising the phone and with the phone in this state?

Bit peeved, hoping you can help.

Many thanks.

Tim.

Did you try to upgrade through a USB hub?

Try flashing with the official O2 ROM and you can reflash over that.

[rugbug]

Hi Graham,

no the connection was direct into the pc's usb port.

I will try to re-flash, but how can I do this when the Xda is now no longer recognised as being connected to the pc!!

Hope you can still help.

Tim.

[markymanxxx]

Hi Graham,

no the connection was direct into the pc's usb port.

I will try to re-flash, but how can I do this when the Xda is now no longer recognised as being connected to the pc!!

Hope you can still help.

Tim.

Disable USB connection in Activesync, put phone into bootloader moade (which it probably is), then run the upgrade.

[rugbug]

Okay, I will need a little help here. How do I put the phone into bootloader mode?

Thanks for your help btw!

Tim.

[grayme]

Hold the backlight and power buttons whilst resetting.

[rugbug]

Okay,

worked that one out - thanks!!

Am going to try to re-flash and install the software again. Will keep you posted. Unless I need to do anything else at this stage.

Tim.

[grayme]

Are you trying the official O2 ROM?

[rugbug]

Hi Graham,

no, am going with the Crossbow version and trying that again. Hoping it works.

You think not?

Tim

[tatathing]

Hi, i´m new here, i got a Qtek 9100 WM5 Freedom Edition, with this soft versions:

Rom Version : 2.26.10.2 WWE
Rom Date : 6/07/06
Radio Version : 02.47.11
Protocol Version : 4.1.13.24
Ext. Rom Version : 2.26.10.105.

IPL : 2.26
SPL : 2.26
GSM : 02.47.11
OS : 2.26.10.2

I´ve got the following question:

Are my versions too old???
Can i update to WM6???, according to your experience, that would be any good????

Please help, sorry for WM 5/6 ignorance.

Thx.

[rugbug]

Hello Graham,

miracle of miracles, Crossbow loaded up!!! And now the phone works super quick too. pretty impressed with it so far I must say!!

Thanks for your help.


Tim.

[fnordelus]

First off, JWright; in the PPC world your like a god when people mention your name. You don't know how ofte I hear people say "I'll put that JWright" or "I'll put that on JRom" to help them prove their point on any given subject. "If it ain't Wright it ain't right" is another one. Keep up the good work JWright.

Does anyone have a screenshots of this ROM? I would love to se em. Also If I have the Vodafone V1640 using it on a T-Mobile US network, which rom version should I use? Any help would be appreciated

[Tadeusz]

First off, JWright; in the PPC world your like a god when people mention your name. You don't know how ofte I hear people say "I'll put that JWright" or "I'll put that on JRom" to help them prove their point on any given subject. "If it ain't Wright it ain't right" is another one. Keep up the good work JWright.

Does anyone have a screenshots of this ROM? I would love to se em. Also If I have the Vodafone V1640 using it on a T-Mobile US network, which rom version should I use? Any help would be appreciated

I agree.
I have only the problem with voice dialing. I need the old voice tags, because MS Voice Commands does not speak Polish. I do not know which one should I use, instead.
Aha, I am in wrong thread. I mean version 2.02.02. I did not try the previuos one.

[cubasemaster]

I was just wondering, even though brought up before: is there support in the latest release for video calls? (and if so how to go about it) and if there was a way to set the text message hotkeys back to default so in oppose to the left soft key being 'delete' upon opening the inbox, it can be changed back to 'new' for speedy ness...

[Maxya]

my 9000 on WM 6.0 not connected with bluetooth CDMA modem.Last time,before upgrade WM5.0-->6.0 i'm not have problem with connection, now-:( " NO modem at above nomber....." help! Please!

[Maxya]

my 9000 on WM 6.0 not connected with bluetooth CDMA modem.Last time,before upgrade WM5.0-->6.0 i'm not have problem with connection, now- " NO modem at above nomber....." help! Please!

[centella]

Can anyone tell me
which rom is for cing 8525

[pride429]

have been using this rom for sometime and love it but found an error tonight. I have a 4gb sd card which works fine but when I took a piccy with the phone and had it set to store images on the sd card I got an error saying there was not enough memory. changing the storage to phone sorted it but am wondering if anyone has this problem or has a solution?

[jasonkruys]

have been using this rom for sometime and love it but found an error tonight. I have a 4gb sd card which works fine but when I took a piccy with the phone and had it set to store images on the sd card I got an error saying there was not enough memory. changing the storage to phone sorted it but am wondering if anyone has this problem or has a solution?

That happens on all roms, WM5 also. The camera app cannot recognise 4gb only 2, so if you fill half your card up it will work!

[pride429]

thanks - will shove some video files onto the card & get back if it does the same error

[flamebourne]

Can you provide one for hp ipaq rw6828 too?

[grayme]

Can you provide one for Ford Focus TDCi Estate too?

.....



What do you mean I should have read the wiki? :D

[ultravox]

sorry... wrong thread

[grayme]

I think it would be better a moderator block the other thread so that we don't have double posting and information split.

Maybe could be useful to write on the 1st page that this kitchen is for Universal, so that people don't get confuse.

I'm a bit lost with some many kitchen uploaded: It's better to create a link to the one that is working .

Cheers

Wrong thread ultravox? ;)

[Vomithaus]

Can someone re-post this rom, possibly on fileshare. I want to try it to fix my wifi problem. Someone else had success with it.

[pillo78]

ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/WM6/Jwrightmcps/2.02.00WWE/9000_WWE_20200_20305_11300.zip

after flashing import the reg settings i've attachedin reg.zip file, you will have a better memory management and less battery drain.



p.s. jwrightmcps roms are coocked for every universal device, i've posted qtek 9000's link if ur device is not qte 9000 u can download the specific rom for ur device here : ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/WM6/Jwrightmcps/2.02.00WWE/

[Vomithaus]

Thanks. I tried it. The flash works fine.. no wifi.

ugh.

Thanks a lot for taking the time to re-post that link for me. I really do appreciate it.

[pillo78]

what radio have you installed? i've no problem with 1.15 and this rom... if you cannot resolve pheraps you have an hardware failure...

[Vomithaus]

I think so. I have tried 1.09 1.18 and now 1.13 (possibly a few others I have not kept track of.)

I'll try 1.15, but I don't hold out too much hope. I think it is hardware failure...

[pakistan]

After update to this rom, I have error massage to run some program.
What can I do?

Please anybody knows?

[Ra_ko]

Hi I have laded this rom but the problem is that I can’t make any call. The phone is seeing the network but I can just make the call only few seconds after the system is started. After that I can’t recive or make any call. What that can be??

[Rarest_Kind]

Is there any new ROM soon expected after 20202_20307_11500?

I installed that one but unable to connect to the dial-up internet, so flashed back to 2.02.00/2.03.05 ver.

[z0d1ak]

As promised, here is the next release…

This new ROM is a continuation of my previous ROMs 2.01.06 and 2.01.08. It has been patched to address the issues that were reported from the previous releases.

You will find below the ROM details and download links, please read all information before installing any ROMs (including the enclosed “Readme” file)

Enjoy,

-Jwrightmcps

ROM Details:

Windiws Mobile 6 (CROSSBOW)
OS 5.2.318 (Build 15341.0.0.0) AKU 0.0
Storage Memory: 43.72
Program Memory: 48.07
Page file: 6MB

What's new in this Windows Mobile 6 ROM Update

************************************************** **********************

CE Rom: (2.02.00 WWE)

- Adobe Reader LE 2.0
- CompactFramework 3.0 SP1
- Device Page Pool set to 6.0 MB
- GPS receiver Control applet
- Revamped outlook, refined icons
- Totally re-mastered sound theme
- Increased interface speed
- Bundled IP-telephony (VoIP, SIP standard)
- Smart Dial 2.0, fast search through contacts, call history
- Any tune can be assigned to any event
- Support for shortcuts in Outlook Mobile
- Full-fledged meetings arrangement system
- Support for HTML in messages
- Smart Filter – handy and fast search through messages
- Numerous MS Exchange 2007-tailored changes
- Integration with Windows Live online-services
- Marketplace – purchase, download, and install directly from the device
- Encryption – bundled memory card encryption
- Improved Remote Desktop, supports true full screen and sound
- New Bluetooth stack including A2DP
- Better integration of SIM / USIM contacts
- Alphabetic sorting of SIM / USIM contacts in contacts list view
- Auxiliary display support native in OS
- Improved 'Internet Sharing'
- Much improved quick start wizard with 'skip' for tutorial, settings setup at boot time
- Pre-provisioned email accounts
- vCards over SMS
- SMS Multiple Recipient improvements
- Save SMS to SIM
- One handed PPC folder navigation improvements
- WMP full screen video on all devices
- Smart-type search
- Larger number of preconfigured email providers (including GMail!)
- USB Hard-drive emulation updated (for sharing storage card contents via USB connection)
- Bluetooth Mouse support (Stowaway Driver set)
- Bluetooth car-kit SIM access
- Added Battery Icon at bottom
- IA Zip update

Extended Rom: (2.03.05 WWE)

- Mobile Operator settings for all major carriers (including the U.S.)
- Skype 2.1 (with Today Plug-in)
- Virtual Earth Mobile

Radio Rom: (1.13.00)

************************************************** **********************

Dopod 900 WWE Download:

ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/Jwrightmcps/Crossbow/2.02.00_WWE/900_WWE_20200_20305_11300.zip

i-mate JASJAR WWE Download:

ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/Jwrightmcps/Crossbow/2.02.00_WWE/JASJAR_WWE_20200_20305_11300.zip

Orange SPV m5000 WWE Download:

ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/Jwrightmcps/Crossbow/2.02.00_WWE/SPV_M5000_WWE_20200_20305_11300.zip

O2 XDA Exec WWE Download:

ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/Jwrightmcps/Crossbow/2.02.00_WWE/XDA_EXEC_WWE_20200_20305_11300.zip

QTEK 9000 WWE Download:

ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/Jwrightmcps/Crossbow/2.02.00_WWE/9000_WWE_20200_20305_11300.zip

T-Mobile MDA Pro WWE Download:

ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/Jwrightmcps/Crossbow/2.02.00_WWE/MDA_PRO_WWE_20200_20305_11300.zip

Vodaphone V1640 WWE Download:

ftp://xda:xda@ftp.xda-developers.com/Uploads/Universal/Jwrightmcps/Crossbow/2.02.00_WWE/V1640_WWE_20200_20305_11300.zip


NOTE: The installs have been digitally signed for your confidence and safety!
(Digital Serial Number: ec b8 10 3b e7 65 19 ba 4f 05 48 14 e3 34 97 61)

---------------------------------------------------------------------------------------
How-To Verify a digitally signed file against a known serial number
---------------------------------------------------------------------------------------

Step 1

Download the file you wish for your device.
(i.e. "JASJAR_WWE_20108_20301_11300_wwe_ship.zip")

Step 2

Unzip the download.
(double-click the ".zip" file and then click on "Extract all files")

Step 3

Open the directory that you un-zipped the download to.
(i.e. folder "JASJAR_WWE_20108_20301_11300_wwe_ship")

Step 4

Locate the InstallSheild setup program in the ROM folder, then right-click it and choose "Properties".
(i.e. "JASJAR_WWE_20108_20301_11300_wwe_ship.exe")

Step 5

Once the file properties is open select the "Digital Signatures" tab, then in the "Signature List" double-click the "HTCCertificates signing authority" signature.

Step 6

Once the "Digital Signature Details" is open select the "Advanced" tab then compare the "Serial number" with the known one.
(My S/N: “ec b8 10 3b e7 65 19 ba 4f 05 48 14 e3 34 97 61”)

Step 7 (Results)

If the serial numbers match then rest easy because you are using a "TRUE" Jwrightmcps ROM that has not been altered and is virus-free.

If the serial number does not match then it is not my original work and should not be used!

NOTE: I did this is case these files make it onto other sites, it will give you guys a way to tell if it is really mine or not. I will always use this serial number (ec b8 10 3b e7 65 19 ba 4f 05 48 14 e3 34 97 61) from now on to sign all my work, so please make note of it!
hey man it dosent work actually when ever i try downloaing it it says no gateway reply or 550 failed to change directory help me how shud i download this rom i m having a wm5 n wan to upgrade it to wm6 using ur rom ! i have an imate jasjar

[z0d1ak]

hi man i got a wm5 rom for my imate jasjar and i wanna upgrade it to ur provided rom but when ever i try to download it it gives an error message saying that " 505 failed to change directory" or "NO GATEWAY REPLY" help me download this rom or send me a more accessable link where i can download ur latest provided crossbow rom for my device. plz


thanx


.!::!__(--,)__!::!,

[farryinn]

hello,can I download this rom, I am new user and need advice before upgrade rom. following device information for my imate kjam:
Rom version: 1.1.9.3
ipl/spl: 1.xx G3 device
radio version: 01.01.10
Extnd Rom: 1.1.9.105

kindly advice for if I downloaded without any facing prb l.e cid/sim lock and if rom not for my device plz let me know for exat latest rom plz....

regard
farry

[casouzaj]

hello,can I download this rom, I am new user and need advice before upgrade rom. following device information for my imate kjam:
Rom version: 1.1.9.3
ipl/spl: 1.xx G3 device
radio version: 01.01.10
Extnd Rom: 1.1.9.105

kindly advice for if I downloaded without any facing prb l.e cid/sim lock and if rom not for my device plz let me know for exat latest rom plz....

regard
farry
Universal ROMs you'll find on many threads here are meant to be flashed into HTC Universal devices only, the branded models like i-mate Jasjar, O2 Xda Exec, SPV-M5000, Dopod 900, Qtek 9000, etc.

So, don't flash any of them into your device. Otherwise you'll, most probably, brick it!

Your i-mate k-jam is one of the HTC Wizard's versions. Please, take a look at this site (http://wiki.xda-developers.com/index.php?pagename=Wizard_New) for further details.

Cheers!
Carlos

[nizarikka]

Dear friends..I really appreciate your awsome efforts. I am looking for the wm6 update for my wm5 installed IDO-NEON (S601) POCKET PC..
If there is any chance to help me please inform here or drop me ur reply in my inbox. nizarikka@gmail.com
Thanking you in advance...;)

[erskinemay]

What if I have an HP ipaq rw6815 Personal Messenger...is there anyway I can upgrade to WM6?

[krishnachait]

HI

Is there WM6 upgrade available for IMATE JAQ??

Thanks for the help in advance

[playboy7]

It is a shame that the links to the downloads are dead.

[Harrysingh]

hi there , i have bought this htc on ebay which got wm6
rom version 2.12.08 wwe
rom date 12/15/07
radio version 1.18.00
protocol version 42.54.p8
extrom version 2.12.010 wwe

everything so far is working fine but voip (internet calling) show its connected , after configuring it connect to sip server , recieves call but can't hear the person on otherside and they cannot hear me please help what to do

many thanks

Harry Singh

[ChRONO5]

plz update link

O2 XDA Exec WWE Download:

ftp://xda:xda@ftp.xda-developers.com...0305_11300.zip

[Tahmaseeb]

HI

Is there WM6 upgrade available for IMATE JAQ??

Thanks for the help in advance

please check the home page of the forum to see which categorize ur device falls into n then go to that devices forum...or u can go to the XDA-WIKI

and sorry guys the rom cooker is buzy with his life...try some other rom...read around n see which one u like

[dannyt84]

Yes, this is the forum for our beloved universal...take a look at xda-wiki, there is all instructions for you. Another thing: this is an old rom, take a look at tomal and luca work (wm6.1)!!!