problem with with 5._Underground_edition_Crossbow_ROM.exe

[gujju]

hi all,

I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.

Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".


Please help me out.....


before update

IPL : 1.08
SPL : 1.08
OS : 1.8.10.2

after crowbow update

IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811


my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?


thanks in advance.

[hdubli]

u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition

[gujju]

but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.

[mfrazzz]

You should take time to read and search the forums. There are numerous posts with similar issues...

You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.

Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).

[gujju]

thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.



Thanks once again.