mtty stuck after "start NB image download"

[niels26.b]

Hello,
i try to flash bootloader 1.01 mfg according to http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG

It hangs after
USB> lnbs SPL-1.01.nbs 50020000
...
start NB image download

According to other threads this behavior exists if mtty can not find the file. But the file is in the same directory as mtty.

Does anybody has an idea what is wrong?

Thanks
Andreas

[shogunmark]

did you do the "Task 32" first? and if you did did you get "Level = 00"

[niels26.b]

yes, but i only one 0

USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000

i got some output at this point, but i cannot remember exactly
???
? 50020000
? 00000000
????

The last line was: start NB image download

My device is SuperCID. SPL 1.09

[Olipro]

there's your problem then; you need SPL-1.04.

I suggest you load Hard-SPL and try again...

also, might I heartily recommend that instead you download my MFG pack and use SSPL with 1.01 rather than flash it to your device... or at least use my patched 1.01 (create an NBH)

[crazyut]

I get that message whenever I do not type the name of the file correctly, like for example, sp1-1.01.nbs instead of spL-1.01.nbs (the latter being the correct spelling). Just my two cents.. :)

[sinmae]

I had 1.09 before, coz I updated with full RUU versions of roms (like 2.06.502.3 cingy or 2.05.255.1 HTC), and I had no problem to downgrade to 1.01 MFG and now to 1.01 oli... I also used mtty, device was supercid, used commands was

USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
USB> task 8

If I remember correctly, task 8 automatically SW reset herm... maybe I am lucky one? :rolleyes:

[Sleuth255]

take a look at your mtty icon. Does it say MFC or does it look like a serial connector. If it says MFC then you have the wrong version of mtty.

my guess: it says "MFC" ;)

[niels26.b]

Thanks for all your answers. At the moment a'm at work and cannot try your suggestions.

But i have some further questions:

>olipro: there's your problem then; you need SPL-1.04.
According to the wiki:
"This is a very special bootloader which can be flashed in any bootloader version BUT to flash it your Hermes must be SuperCID first..."

...can be flashed in any bootloader... what does this mean? i thougt i can flash it from 1.09. sinmae was able to do it. (or did i miss something)

>crazyut: wrong file name
i checked this several times. i typed the right name, but i do not now whats the working directory of mtty. i put the nb-file in the same directory as mtty and startet mtty from a dos-prompt. so this should be ok.


>Sleuth255: wrong version of mtty

i tried to investigate this yesterday. somebody said he has version 1.11a. i have version 0.01. it says MFS. so this should be the problem. but this is the version from the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/uploads/mtty.exe

where can i get the right version? (at google i found mttty (3 t))


Thank
Andreas

[pof]

Use the mtty.exe included in this pack (ftp://xda:xda@ftp.xda-developers.com/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip), mtty and nbs file in the same dir.