SSPL for Breeze

[oirad]

Is SSPL for Breeze anywhere to be found?

I'm having a gzillion problems with 1.29 Radio ROM (from 1.32.251.1_Test update), call drops, data drops, weak signal........ :mad:
After installing named update I'm unable to install any other due to INVALID VENDOR ID error. Of course I didn't SuperCID my phone... :( My mteor is QTEK_A07 CIDed.

If there isn't a SSPL for Breeze is there any other way I could force some other Radio ROM in it?

Thanks a lot!

[MrPhoni]

Yes, it works.

You can find further details here http://forum.xda-developers.com/showthread.php?t=282223

[oirad]

No, it does not on my MTeOR... :(

After starting SSPL-HERM.exe on device it just blanks the screen and locks... I have to remove the battery to restart it.

[MrPhoni]

Check that you are using the HTC MTeoR EnterBL.exe in der RUU directory of this Tool.

SIM CID Unlock V3 has Hermes version inside which doesn't work with MTeorR/Breeze.

[oirad]

so this is what I did:
1. transfer RUU\EnterBL.exe to device
2. run EnterBL.exe on device -- phone restarts and enters BL
3. disable ActiveSync USB connections on PC
4. connect phone with USB cable
5. run RUU\ROMUpgradeUt.exe

and keep getting Error 262 at this point... :(

[oirad]

This will solve INVALID VENDOR ID error, but cannot be used to flash with new RUU Updater which requires SPL 1.10.


1. Copy SSPL-HERM.exe to your Breeze
2. Extract SPL 2.05 from RUU (RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3 , you can use WinRAR and dutty's good NBH tool), copy this SPL.nb to the same folder on device as SSPL-HERM.exe
2. start SSPL-HERM.exe with SPL.nb you just copied as parameter AND immediately press POWER and CAMERA buttons.
3. device will enter Bootloader. Screen will say "IPL 1.00 by Des SPL 2.05"
4. Start any RUU on computer, when complains about INVALID VENDOR ID, just restart RUU Updater without touching the device

Enjoy!!!

-- Now I just need to find the way to load Radio 1.38 on my MTeoR... :confused:

[MrPhoni]

Just copy ROMUpgradeUt.exe from an older rom version into the directory of your 1.34 ROM and run it. Device will be update with the newer OS.

Secondly run ROMUpdateUtility.exe which is included inside the 1.34 ROM package. So your radio will be updated, too.

[oirad]

Just copy ROMUpgradeUt.exe from an older rom version into the directory of your 1.34 ROM and run it. Device will be update with the newer OS.

Yup... did that... and as already people wrote it didn't update the Radio...



Secondly run ROMUpdateUtility.exe which is included inside the 1.34 ROM package. So your radio will be updated, too.

Did that too... But with no result... If I start my phone in 1.10 Bootloader ROMUpgradeUt.exe exits with INVALID VENDOR ID. If I start in 2.05 Bootloader, ROMUpgradeUt.exe reports some other error... :(

As I see it, the solution would be to start the phone with patched 1.10 BL that doesn't check for CID... or somehow SuperCID it...

[gajda]

Hello, did you managed to downgrade radio? I would like to flash original radio version (1.16) to my phone but I'm stuck at 1.34.

[oirad]

nope, still stuck on 1.29 :(