charmer dead...

[Nelix]

flashed charmer with wizard...an now its totally dead...cant enter boot....anyone can help...

[nocturne.op.15]

dead - can you describe it better? is it freezing in the splashscreen? or not powering on completely? have you tried to charge it using normal charger, not usb sync cable?

what about bootloader, dead too? try to hold camera button and press reset. if three color bars appears, you have a reason to stay calm.

[Nelix]

dead - can you describe it better? is it freezing in the splashscreen? or not powering on completely? have you tried to charge it using normal charger, not usb sync cable?

what about bootloader, dead too? try to hold camera button and press reset. if three color bars appears, you have a reason to stay calm.

complitely dead...not powering...cant enter boot...

[nocturne.op.15]

hmm, it looks bad. I don't have any valuable ideas...but:

maybe you may try to charge battery in another charmer. When I bought my one, directly after unpacking the box, it wasnť able to start. I was angry, but then ve have tried to charge the battery in my friend's charmer and it worked (the battery was not completely discharged, but maybe some electronics inside was somehow blocked)

otherwise, you can try to diagnose electric circuits inside - but do it carefully, you may easily damage it!

[repair htc]

:cool: it has production defect. the HTC has knowledge of this... and is about one reparation in warranty. [[]]

[After9]

dead - can you describe it better? is it freezing in the splashscreen? or not powering on completely? have you tried to charge it using normal charger, not usb sync cable?

what about bootloader, dead too? try to hold camera button and press reset. if three color bars appears, you have a reason to stay calm.


I have a problem with my mda compact II and it was almost like describe.
after i tried to upgrade my pda, the update went to the end and finished successfully, the pda doesn't turn on, it shows the t-mobile image and then goes off, if i press camera button and turn on button i can see the tree colors, but what should i do now?
help me please.

[hanmin]

use official t-mobile rom (in t mobile official page, difficult to find, get the link from the XDA-Wiki).

1. put your charmer into the 3 colour screen mode
2. kill your activesync in your PC (or just disable USB link)
3. run the EXE of the offical ROM

Do it before your battery went dead.

[After9]

use official t-mobile rom (in t mobile official page, difficult to find, get the link from the XDA-Wiki).

1. put your charmer into the 3 colour screen mode
2. kill your activesync in your PC (or just disable USB link)
3. run the EXE of the offical ROM

Do it before your battery went dead.



But my pda just shows for 3 seconds the 3 color screen, perhaps my batery went down..
i was trying to update from a t mobile update...
dammm
how can i try to put original again if i can him on?
regards

[After9]

if i conect with the power cable i can go to the 3 color screen, but how can i put the original rom?
the mda must be syncronize with activesync? if i take off power cable e shut down, with the power cable on, if i try a normal start is allways restarting...
ideas?

[dave106]

if i conect with the power cable i can go to the 3 color screen, but how can i put the original rom?
the mda must be syncronize with activesync? if i take off power cable e shut down, with the power cable on, if i try a normal start is allways restarting...
ideas?

try leaving it off with the battery in and plugged in for about an hour to see if you can get a charge, otherwise use another battery that is fully charged. Only other way is to use a SD backup which you can then install with the power cable plugged in.

also you do not need an activesync link to install ruu rom packages. also long as your in bootloader with usb showing in the corner, the ruu will be able to find it.

[After9]

try leaving it off with the battery in and plugged in for about an hour to see if you can get a charge, otherwise use another battery that is fully charged. Only other way is to use a SD backup which you can then install with the power cable plugged in.

also you do not need an activesync link to install ruu rom packages. also long as your in bootloader with usb showing in the corner, the ruu will be able to find it.


i'm using another charge battery 100% but in the 3 color screen is allways rebooting, so i can connect the usb cable.
i just can see the 3 color stable with the power cable.
Can i connect directly to pins where battery connects?
can i install in bootloader from sd card?

[After9]

well, now i can turn on the bootloader but when i'm trying to install the rom from t-mobile gives me some errors in the nk.nbf...
what should i do?
it stays on 1% and give me error 326 invalid command...

[claroscuro]

dead - can you describe it better? is it freezing in the splashscreen? or not powering on completely? have you tried to charge it using normal charger, not usb sync cable?

what about bootloader, dead too? try to hold camera button and press reset. if three color bars appears, you have a reason to stay calm.


I Have the problem whit de boot, is stay in tree color.
I have do the hard reset and the soft reset and donth work.
canth you help.
I have the cingular 8125

[vlodeck]

claroscuro: First of all, this is not 8125. Second of all, just flash an official rom while in bootloader mode.

[retina76]

[. Only other way is to use a SD backup which you can then install with the power cable plugged in.

[/QUOTE]

i have similar problem how can u use SD RUU when power cable is attached and mda compact 2 is in 3 coloured bootable screen.
i have a fully cahrged batter but mda is not detecting battery, mda only start+ bootable mode when power cable is plugged in( battery is 100% charger in another MDA but MDA is not recognising battery.

PLZ help

[vlodeck]

You can buy an adapter for charmer in which you can insert USB cable, power cord and headphones jack.

[retina76]

can you please recommend what it is called as search for MDA COMPACT 2 USB cable, power cord and headphones jack on ebay doesnot come up with any thing.

Cheers

[retina76]

http://cgi.ebay.co.uk/MDA-Compact-II-2-USB-Sync-Cradle-Desk-Stand-Charger_W0QQitemZ280156191840QQihZ018QQcategoryZ56 166QQcmdZViewItem

do u mean this item, i am not sure from description if it can sync using a usb cable at the same time being charged by main power source.

[tbw]

HI, I have the same problem, and even with the battery been on charge for a full day, as soon as a try the updates it comes back saying there is under 50% charge. When I try in the sync holder with power as soon as the USB is connected it powers off.
Did you find a answer to the problem ?
Cheers

TBW

[retina76]

this is nothing , my friend , MY BATTERY DOES NOT EVEN CHARGE AT ALL:)
IT IS NOTE DETECTED AT ALL.
i have tried fooling the device by using the cradle with power supply and usb connected with pc but it neither cahrges the device nor it is deted=cted by the pc.