Hard-SPL, Or How to Not Brick Your PDA Ever Again And Fix Bad Blocks!

[Olipro]

OK, new version of Hard-SPL, this one is based on an MFG; seems HTC popped a stealth CID-check process in this, bastards, found and patched it anyway though.


CURRENT FEATURES
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-rtask commands enabled
-lnb command enabled
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.30.Olipro

Version 1.30:
-Fixed SPL protection bug
-rtask commands enabled
-based on an MFG SPL

Version 1.20 - initial release
-Initial version; has all features except those in newer version


Download below, enjoy!

[ZakMcRofl]

Awesome, looking forward to it! fuckwit-proof TM

[ausdim]

Great work Olipro but is there any away to unlock the rtask b command??
Like the 1.01. mfg spl??

Cmd>rtask b
Command error !!!

Thank's for your great work... :D

[Olipro]

Great work Olipro but is there any away to unlock the rtask b command??
Like the 1.01. mfg spl??

Thank's for your great work... :D

it might be possible, that's something for future thought though, if it can be done, then I will.

[lvsw]

Ok, well, since Hard-SPL has been released for Hermes, I've ported the same features over to Trinity;


CURRENT FEATURES
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.20.Olipro


Download below, enjoy!


Thanks!!!!!!!!!!!!

[copysat]

thanx ....

[Hajaz]

so basically i run the romupdate utility without transfering anything to my p3600, the once its in bootmode just run the regular htc update?

[Olipro]

so basically i run the romupdate utility without transfering anything to my p3600, the once its in bootmode just run the regular htc update?

yep, that's exactly it, once you have Hard-SPL, there's no need to bother with CustomRUU any more.

[mun_rus]

Great job man!!! Thanx a lot!

ps. lnb command was missed( It's too nessesary for me...I need often to reflash roms (via mtty it takse about 3 min)
How can i return original spl to make 1.01 MFG from it? Or can i make unlock procedure with your spl? Just want to know, coz i don't want to get bricked device.

[Olipro]

Great job man!!! Thanx a lot!

ps. lnb command was missed( It's too nessesary for me...I need often to reflash roms (via mtty it takse about 3 min)
How can i return original spl to make 1.01 MFG from it? Or can i make unlock procedure with your spl? Just want to know, coz i don't want to get bricked device.

what the fucking hell are you talking about? 1.01MFG for Trinity? LNB command?

as for bricking your device... this is supposed to fucking PREVENT IT.

[mikesol]

Thanks for this, man. Appreciated. I'd give you money if I didn't have rent to pay :-)

[mun_rus]

what the fucking hell are you talking about? 1.01MFG for Trinity? LNB command?

as for bricking your device... this is supposed to fucking PREVENT IT.

why are you so agressive?
im talking about mfg spl for trinity. i see you don't know anything of it.
when i used imeicheck unlocker i got this spl.
and i use lnb command to flash os.nb via mtty.
i have only one question how to return original spl? just flash whole original rom?
btw, my battery drains very quick with your hard spl.

[Olipro]

why are you so agressive?
im talking about mfg spl for trinity. i see you don't know anything of it.
when i used imeicheck unlocker i got this spl.
and i use lnb command to flash os.nb via mtty.
i have only one question how to return original spl? just flash whole original rom?
btw, my battery drains very quick with your hard spl.

hah, that's a funny one... maybe it's the ultra secret battery draining routine I coded into it... honestly, what a fucking stupid comment.

[pof]

ps. lnb command was missed( It's too nessesary for me...I need often to reflash roms (via mtty it takse about 3 min)
Takes the same time to flash an OS in NBH with non-MFG bootloaders if you put only an OS in the NBH file.

How can i return original spl to make 1.01 MFG from it? Or can i make unlock procedure with your spl? Just want to know, coz i don't want to get bricked device.
If you run imie-check's unlocker again you'll have 1.01 again, but this will remove HardSPL from your phone.


how to return original spl? just flash whole original rom?
Put the SPL you want to load in a NBH file (header type 0x200 for trinity SPL) and flash it using SSPL, this will overwrite Hard-SPL.
If you flash from bootloader Hard-SPL will not be overwritten.

btw, my battery drains very quick with your hard spl.
As oli said, this is non-sense... will drain the same with retail's HTC 1.07 spl.

[mun_rus]

pof, thanx a lot for your reply and help.
just knew a litle about spl's...

@Olipro
thanx for your job once more. my comments were really stupid, sorry

[stepw]

On contrary, 1.01 MFG is likely to be drawing more power, successors are better optimized for power conservation.

[Dead Cell]

I'm really baffled. I've got my device SIM and CID unlocked, thanks to pof, and installed the latest HTC Rom...

But what is all this for? :o

Would appreciate it if someone could explain.

Thanks in advance.

D.C :cool:

[Olipro]

I'm really baffled. I've got my device SIM and CID unlocked, thanks to pof, and installed the latest HTC Rom...

But what is all this for? :o

Would appreciate it if someone could explain.

Thanks in advance.

D.C :cool:

well, mainly to allow you to flash unsigned ROMs to the device without Soft-SPL. and secondly to allow you to recover the device if anything gets fucked up during a flash... such as the radio, or the OS.

[turchino]

Thanks Olipro for your efforts, very nice one!

[Dead Cell]

Thanks Olipro.

Can I just download the file and just install it? Will it change anything on my device? Bearing in mind that my device is CID unlocked.

Thanks

D.C

[rydel12]

Ok, well, since Hard-SPL has been released for Hermes, I've ported the same features over to Trinity;


CURRENT FEATURES
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.20.Olipro


Download below, enjoy!

Hi,

I'm sorry for asking such an ignorant and stupid question....
How do i install the Hard-SPL on my device? I couldn't open the zip file whenever i download it onto my device...
Thanks for spending your time on this!!! Cheers!

[Olipro]

Hi,

I'm sorry for asking such an ignorant and stupid question....
How do i install the Hard-SPL on my device? I couldn't open the zip file whenever i download it onto my device...
Thanks for spending your time on this!!! Cheers!

open it on your computer dumbass.

[rydel12]

open it on your computer dumbass.

Hi,
thanks for your reply... i've tried to open it on my computer but it still doesn't work for me..message reads "unexpected end of archive" i guess you're right, i'm such a dumbass... thanks anyway and sorry for bothering you.. keep up the good work.. Cheers my mate!:)

[Olipro]

Hi,
thanks for your reply... i've tried to open it on my computer but it still doesn't work for me..message reads "unexpected end of archive" i guess you're right, i'm such a dumbass... thanks anyway and sorry for bothering you.. keep up the good work.. Cheers my mate!:)

no, that's not your fault, that's due to this fucking forum software; when the site is playing up, the zip files don't download properly.

your option is as follows; keep trying till it works, or 2) download FlashGet and use that to download it instead; flashget can tell it's corrupted and redownloads continuously till it gets the file.

[rydel12]

no, that's not your fault, that's due to this fucking forum software; when the site is playing up, the zip files don't download properly.

your option is as follows; keep trying till it works, or 2) download FlashGet and use that to download it instead; flashget can tell it's corrupted and redownloads continuously till it gets the file.

Thanks alot! i'll try it today!:)

[jpogge]

I had the same problem with the archived files, my winrar program states the end of the archive is incomplete, unexpected what ever that means, underthe tools menu there is an option to repair, this has worked every time for me. http://www.rarlab.com/

[rydel12]

I had the same problem with the archived files, my winrar program states the end of the archive is incomplete, unexpected what ever that means, underthe tools menu there is an option to repair, this has worked every time for me. http://www.rarlab.com/

Thanks for the tip! I've got it working already... followed Olipro's instruction to just try and download it again and again... Thanks Olipro, you're great! :)

[Matterhorn]

Hi,
thanks for your reply... i've tried to open it on my computer but it still doesn't work for me..message reads "unexpected end of archive" i guess you're right, i'm such a dumbass... thanks anyway and sorry for bothering you.. keep up the good work.. Cheers my mate!:)
I'm glad you got the file to work. You are a real good sport, and not a dumb ass :) .

[vasil]

Ok, well, since Hard-SPL has been released for Hermes, I've ported the same features over to Trinity;


CURRENT FEATURES
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.20.Olipro


Download below, enjoy!

If you flash it on a CID Locked device, will it become CID Unlocked or do you need to unlock separatly???
I'm just looking at the first Feature on the list.

[Olipro]

If you flash it on a CID Locked device, will it become CID Unlocked or do you need to unlock separatly???
I'm just looking at the first Feature on the list.

it gives you the same benefits... except for ExtROM unlocking; I'm afraid that you can only have that if you get my ExtROM patch working.

[garydempsy]

Olipro, could the updates that you made to the Hermes Hard-SPL be ported over to the Trinity?

[Olipro]

Olipro, could the updates that you made to the Hermes Hard-SPL be ported over to the Trinity?

at this point, I don't feel that's really necessary, why, what's wrong with it?

[garydempsy]

I just was curious to see if the Trinity would also benefit from your updates. I haven't had one problem with hard-spl, but you know how it is to always want the newest and most up to date. After having to get a X01HT repaired, I have an enormous amount of appreciation for your work on this :)

[Olipro]

I just was curious of the Trinity would also benefit from your updates. I haven't had one problem with hard-spl, but you know how it is to always want to newest and most up to date. After having to get a X01HT repaired, I have an enormous amount of appreciation for your work on this :)

well, I'm bored, what do you want me to add from the Hermes one that isn't in the Trinity?

[garydempsy]

I just saw on the hermes hard-spl page that there was a white screen issue and the spl being overwritten bug addressed. I am not sure if these were already addressed in the trinity 1.20 hard-spl, or if they are even needed. If this isn't really applicable for the trinity I am sorry for wasting your time.

[Olipro]

I just saw on the hermes hard-spl page that there was a white screen issue and the spl being overwritten bug addressed. I am not sure if these were already addressed in the trinity 1.20 hard-spl, or if they are even needed. If this isn't really applicable for the trinity I am sorry for wasting your time.

well, I don't personally think you guys are going to encounter this issue, but if someone proves me wrong then I'll remove a few patches.

[varden]

Does this change the CID permanently (voiding the warranty) or can we flash a shipped ROM with no sign of cooked ROM's presence?

[RebelShadow]

Does this change the CID permanently (voiding the warranty) or can we flash a shipped ROM with no sign of cooked ROM's presence?

It changed the CID permanently to it would void your warranty. :o

[Olipro]

It changed the CID permanently to it would void your warranty. :o

no... you idiot, it doesn't touch the CID, it ignores it.

[Toxic17]

Olipro.

I have already updated and unlocked my SPV_M700 (versions in Signature) is there any realy benifits for me to update using your HardSPL? will this affect any of my current roms?

Thanks in advance

[ZakMcRofl]

Has the issue where Hard-SPL would have problems with os.nb's made by Tadzio's toolchain been adressed yet? Some people get whitescreen after flashing those "improper" os.nb files.
Is it something you (Olipro) can fix/prevent in a future version or must Tadzio fix his toolchain?

[Olipro]

Has the issue where Hard-SPL would have problems with os.nb's made by Tadzio's toolchain been adressed yet? Some people get whitescreen after flashing those "improper" os.nb files.
Is it something you (Olipro) can fix/prevent in a future version or must Tadzio fix his toolchain?

some people get the error due to bad NAND... others don't.

the issue lies with tadzio creating bad images at this point.

[arvind09]

Olipro any chances of you making something similar for the Artemis?Would be really great if you could.

[Antimus]

Ok, got your hard SPL on my phone, just flashed MUN's ROM onto the phone, it's not working right (images dont open for some reason) so I'm going to either put mun's rom back on or try LVSW's, problem is, as soon as the flash application drops my trinity into the bootloader, it drops the connection, now why would this be happening?

[Antimus]

Well, after many attempts to get it reflashed, still nothing, it will not sync to my PC while it's in the bootloader, so I guess I'm stuck.

What's going on?

[Antimus]

fixed it now, had to run SSPL, then run the hardSPL rom updater through that.

Thought things like this werent supposed to happen?

[racerx_]

i'm kinda curious about something related to antimus' question..

i loaded hard-spl on my trinity.. but have upgraded to windows mobile 6. However, the RUU is pusshing sspl on to my trinity. So am i still getting the advantages or hard-spl?

[pof]

the RUU is pusshing sspl on to my trinity. So am i still getting the advantages or hard-spl?

You can put device in bootloader mode manually and start update after, then u'll use HardSPL instead of SSPL. And yes, you're getting the advantages of it, because if flash process is interrupted, you'll be locked on HardSPL and be able to reflash again even if your radio is corrupted.

[racerx_]

ahhh... got it.. Thanks POF! (slowly becoming un-noobed)

[tahit1]

-version displays 1.20.Oliprohi, my bootloader display : SPL-9.99.CP
is this normal ? and is it possible to go back to original SPL?

[biogrei]

how I make to see that version I have?

[MontAlbert]

Stoopid noobie question:

cant find any instructions for the hard SPL. On the hermes instructions it only has 2 files but the trinity one has 6 files.....

which to use first? do i use them all before installing the new WM6 ROM?

Can anyone help?

thanks
Scott

***UPDATE****
OK, ran the ROMUpdateUtility.exe file..... got so far as to update the radio version but was going to change the current version back to 1.20.... nothing to do with olipro or anything...... said it was going to update my ROM image and SSPL is tranferred to your trinity.....I dont want to go back with my rom image, just update the SPL before i try and load on WM6.....

[MontAlbert]

ok. now i feel really stooopid.....

after doing the above i checked my bootloader and it is now: IPL-0.50 and SPL-1.07.0000

So, i now have hardspl on my trinity?

so to now install the new rom i just double click on the new rom file?

thanks

[ZakMcRofl]

some people get the error due to bad NAND... others don't.

the issue lies with tadzio creating bad images at this point.

Apparently you found a fix for this problem, from Hermes changelog:

Hard-SPL-1.35
-addresses an issue for those with Real Bad Blocks to prevent whitescreens.


Could you please port this over to Trinity to prevent whitescreens there as well?
Thanks in advance, Zak

[geek92i]

hello


i have trinity and bad block on my htc , could someone have a fix to recover this fix ?

[Benzin]

(Already posted in the SIM-Unlock thread) :o (I know it's no good posting it twice - please disregard if already read but I'm more blocked than my PDA).:(

Hi,

I have bought an Orange SPV M700 unit from Orange (France) with the best will to contribute to evaluate ROMs or whatever without risking my main unit HTC P3600.

But the first day, I've fallen into deep trouble. I've done the following steps:

- Install Olipro's Hard-SPL. (OK)
- RUN Pof's procedure without loading SSPL first (apparently the radio ROM was installed, then I ran the PDA utility and sim-unlocked and superCIDed the PDA. SIM is unlocked.

Now I have the problem. I cannot flash a new ROM. If I run Hard-SPL or SSPL the PDA screen fades off in a few seconds until the PDA looks off.
If I run a ROM update procedure (I've tried official Spanish HTC update and also official HTC WWE ones and they start looking to work but... around 13% of the process, the PDA screen fades off and dissapears. The PC utility keeps running until the end and indicates the ROM update was successful. At PDA re-start, my PDA is still running the original Orange French ROM.

Could anyone help?

[nonexxx]

hi, my bootloader display : SPL-9.99.CP
is this normal ? and is it possible to go back to original SPL?

I have the same SPL-9.99??????

I install the Rom Dopod because work very good with BBC, and now is posible back another Rom with WM6, when the BBC work with WM6 I change.

Thanks.

[Benzin]

I have tried to update the ROM with your ROMUpdateUtility (Olipro) and I get the following:

- When trying to update a new GSM ROM section the screen fades out and the trin looks like going off.

- When trying to update any other ROM sections everything looks like working, the Trinity remains on and the bar reaches 100% but, at re-start, ROM remains the original one. Nothing changes (splashscreen, OS, etc).

Any help would be appreciated.

[Benzin]

Hi, I am not 100% sure that the reason of my case actually is the 4GB Mini SD TOPRAM inserted in it during the process or just a kind of 'bad contact' within my Trinity.

Anyway, I recommend you avoid having a memory card while updating ROMs.

THANKS POF FOR HIS SUPER SUPPORT, HIS TIME AND HIS PERSONAL ATTENTION.

[geek92i]

Block 0x180(384) is BAD block !!!

this is what i have after flash with mun and lsw rom ....

I can boot correctly with lsw , but mun and others rom displayed white screen , i follow somes post with same problem but don't find how to fix it with my trinity ....if someone can help .?:confused:

sorry for my poor english :(

[tahit1]

I have the same SPL-9.99??????


Hello, i just come back to this version question: why spl display: SPL-9.99.CP ?
Cheers

[pof]

why spl display: SPL-9.99.CP ?
Because you have flashed Des CrashProof SPL.

[oufledingue]

hello olipro,

i hope you can help me.

when i flash some of the cooked rom available in that forum, i got the whitescreen symptom (the background is completely white and i can see only the active part of the screen and some application don't wan't to launch at all !)

my Trinity has your hard-spl. Does it prevent those symptom by marking the bad nand sector ? or maybe i did not understand how your hard spl work.

thanks in advance for your help

[oufledingue]

hello olipro,

i hope you can help me.

when i flash some of the cooked rom available in that forum, i got the whitescreen symptom (the background is completely white and i can see only the active part of the screen and some application don't wan't to launch at all !)

my Trinity has your hard-spl. Does it prevent those symptom by marking the bad nand sector ? or maybe i did not understand how your hard spl work.

thanks in advance for your help

when i launch the task 2a and just after the info8 commands, here are the results


Cmd>task 2a
Check block : 75 - Bad

Check block : 76 - Bad

Check block : 915 - Bad


Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x4B(75) is BAD block !!!
Block 0x4C(76) is BAD block !!!
Block 0x393(915) is BAD block !!!

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19D00
Partition[3], type=0x4, start=0x1CD00, total=0x1DB00

CE Total Length(with sector info) = 0x3A86800
CE CheckSum Length(without sector info) = 0x39A0000


any idea what to do ?

[piluco]

[QUOTE=Olipro;1188555]Ok, well, since Hard-SPL has been released for Hermes, I've ported the same features over to Trinity;


CURRENT FEATURES
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.20.Olipro


I have problems to flashare mine p3600 in as far as the end of the procedure I have always the monitor white man bringing back report of the TTY the
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x149(329) is BAD block !!!

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19300
Partition[3], type=0x4, start=0x1C300, total=0x1E500

CE Total Length(with sector info) = 0x3941800
CE CheckSum Length(without sector info) = 0x3860000

Cmd>task 2a
Check block : 329 -

someone can help me?

[Olipro]

Ok guys, I haven't forgotten about you, I'll be releasing a *new* Hard-SPL shortly.

The computer I do the reverse engineering on unfortunately had a mishap that resulted in the graphics card popping its clogs, so I'm afraid I won't be releasing it until I get a replacement one.

Cheers guys!
Olipro,

[vanydotk]

OK guys, ready for a noob question? How do you install this onto your phone? I didn't see a step by step readme in the zip file just about 6 files.

Also, let's say after installing this and I flashed my phone and failed in the middle, how would you recover it after having this installed?

After installing this, and let's say I wanted to install the the offical ROM off of HTC's website, would I just install it like I normally would or would you have to take some special steps after installing this?

Lastly, will this void the warranty? Thanks in advanced.

[maevro]

Thanks for this. I have never changed a ROM on a phone and this is all new to me. I really don't want to screw it up. I have no issue donating a few bucks to help your cause. I just want to know exactly what I am doing and not screw this up.

[jasonchiu]

hello all,

when i run this i get "ERROR [246]" and its telling me that its not connected to my PC.

I previously ran Pof's Unlock and CID unlock, is this the cause of my problems? if so how can i revert this?

thanks for the help in advance

jason

[Olipro]

ok, I have my replacement card, I'm working on a new Trinity SPL as we speak

[shym]

Same player ... try again and it should work ... ;)
when i run this i get "ERROR [246]" and its telling me that its not connected to my PC.

[Xtacy]

Just a quick question how to do the Hard SPL when the PDA is brick there is no connection to USB what so ever then that the point how to UN-Brick that :(
Thank you all

[stepw]

Just a quick question how to do the Hard SPL when the PDA is brick there is no connection to USB what so ever then that the point how to UN-Brick that :(
Thank you all

See http://forum.xda-developers.com/showthread.php?t=308691, one other member had some positive experience recently

[racerx_]

Olipro-

even though i had your hard-spl on my device, official upgrade to WM6 from Dopod replaced it with their new bootloader, version 3.03.0000


will there be any problem reloading your Hard-spl back to my device now?

[mxlaser]

Thats basically what i did, and its fine on my Dopod.

Hard 1.20 HARD SPL, updated to official WM6, replaced SPL to 3.00??? whatever, then flashed HARD SPL over that afterwards. Worked perfectly

[Xtacy]

See http://forum.xda-developers.com/showthread.php?t=308691, one other member had some positive experience recently
Thanks Stepw but I am really confuse now How to run the splxploit.c . Now my Dopod really stuck in the boot load in the green with the Windows logo and stay there
The reason is if the device is brick then CAN NOT sync (activesync ) that mean no communication from device to computer and I see this in the readme from zip file
To run use './splxploit -F YourSPL.nb' Sorry I got no idea how to do it please some one help me out i m stuck . After upgrade from this link
http://forum.xda-developers.com/showthread.php?t=312499 from AX3L very good upgrade there but dont know what reason now it turn my Dopod to BRICK

[Xtacy]

Oh no your guys using Linux that why I don't know how to do it then Is there anyway I can do it in Windows XP Please
Anyway your guys the best I m appreciated all the jobs here :D

[BlackBeauty]

hello all,

when i run this i get "ERROR [246]" and its telling me that its not connected to my PC.

I previously ran Pof's Unlock and CID unlock, is this the cause of my problems? if so how can i revert this?

thanks for the help in advance

jason


same here - find any solutions for this jason? someone replied to you and said to try again but i've already tried half a dozen times :confused:

[vanydotk]

same here - find any solutions for this jason? someone replied to you and said to try again but i've already tried half a dozen times :confused:

I had this problem and what I did was try to do the romupgrade while the pda was in windows then when it asked to launch bootloader I pressed yes, after that it would give me another error while the pda went into bootmode, while in bootmode, I ran the romupdate again and it updated without any problems. Hope that helps.

[BlackBeauty]

thanks vanydotk - i don't even know if i have a bootloader to launch though???

when i check the spl version at the moment, i get:

trin100
ipl-0.50

trin100
spl-1.07.0000

[Shadowmite]

New version at:
http://forum.xda-developers.com/showthread.php?t=316441

[sunnycheng]

Please help. I have installed hard spl 1.3, and I got an error while updating WM6, now I am trying to revert to the original rom, but it keeps on giving me an error saying VENDER ID error. But this is the official rom for my phone. The SPL on the PPC is still HARD SPL 1.3, can anyone please help?

[motin]

hi pof and all

can u help me and teach me how to install hard spl 1.01 on my trinty please

thanks

[aaa]

i had problems with Hard SPL v7 with my trinity (Spanish version). The error is 246. With active sync 4.2 push RUUWrapper.exe (Hard SPL v7) The PDA go to bootmode but the program show the error 246. Which is the problem)

I want put WM6 Faman 2.4. My trinity had
IPL 0.50
SPL 1.07.0000
ROM 1.23.412.3

Thank you

[greenba]

hello, i am trying to install hard spl oli 1.2
after download i launched romupgrade utility but i got ERROR 246.
I laucnhed again and got again error 246 and my device is in bootloader with following data displayed:
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds

is this OK? or shld is suspct i previously loaded hard spl by des?
actually i did try to install a Hard spl last week but after error message i quitted installation and dotn remember if was olipro's or des

what shall i do

appreciate if somebody can help

thks

[ZakMcRofl]

The new version is back up:
http://forum.xda-developers.com/showthread.php?t=316441
Hopefully this will work without whitescreen issue so we can replace DES' Hard-SPL with one that has protection against overwriting.

[Olipro]

Ok, the main post has been updated, please download from the first page on this thread.

Sorry about the wait, I only got round to figuring out the bug last night; it seems the usual SuperCID patch doesn't work since this SPL uses a different way of returning the CID, rather stealthy in fact, but I found (and patched) it anyway.

[racerx_]

oli-

thanks for this! a lot of ppl are asking how to go back to original spl after hard-spl.. with your new 1.3, can they simply run the RUU without manually placing it in bootloader? or they need to do something else first

[vasil]

seems HTC popped a stealth CID-check process in this, bastards, found and patched it anyway though.
:D :D :D
Great job.

[fantomex]

oli i am probably a total moron, but after a screen that detects my version as 1.23.405.2 and the one that should be flashed as 1.30Oli then the unsigned note to run some software appears on the PDA, if i press the hotkey the trinity gets "restarted" and into a red-green-blue-white screen and connection gets lost with error 264.

[racerx_]

just keep the device connected to usb, leave it in the tri-color (bootloader) screen and restart the Rom Update Application. if in doubt, follow this guide (http://trinityguides.info/index.php?option=content&task=view&id=21)

[fantomex]

ii tried that, the progress bar appears, but the update is "done" in like 5secs and apparently nothing ever gets updated.

[racerx_]

put your device manually in to bootloader and tell me what it says...

also, i know it sounds weird, but just try running it again. I think mine did that to me once when i changed spl's to 1.30.. second time it worked. Either way, though, the flash to new bootloader is very fast.

[mikhe69]

put your device manually in to bootloader and tell me what it says...

also, i know it sounds weird, but just try running it again. I think mine did that to me once when i changed spl's to 1.30.. second time it worked. Either way, though, the flash to new bootloader is very fast.

Now I'm having the same problem... the 246 error message...:mad:
In the screen appears the following information:
TRIN100
IPL-SSLP by Des
TRIN100
SPL-1.07.ds

And also I cannot manually put the bootloader, so I don't know what kind of version I have.
I press power & camera button and with stylus press the reset button, but the trinity only makes normal reset operation...:confused:

[racerx_]

just restart the ruu after seeing the error 246..

[belek]

Upgrade process is starting after SPL-Olipro.

But now status bar is waiting at %13 on device and computer screen.

What is wrong???

[mikhe69]

just restart the ruu after seeing the error 246..

I did and works, the device updated, but is this information correct???

TRIN100
IPL-SSLP by Des
TRIN100
SPL-1.07.ds

thx

[racerx_]

no.. you should see spl 1.30.olipro

try again :D

[pena_leve]

Hi, need some help.
I'm stuck in bootloader.
Tried everything to put a rom on it.
Nothing works. I see the bootloader, every time i reset or hardreset still in boot. I was tryong this method but still stuck.
Any paths to follow to just put a rom on it?

[racerx_]

follow this splxploit guide (http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=60)

and everyone... please read before you flash..

[fantomex]

i am dumb, the short update really worked (the 10minute notification is for flashing whole ROM =), i thought it will change in the ROM update utility from 1.23 do 130Oli, but it only changes when you run the bootloader manually =) it worked like a charm.... i put latest ax3l in it - and it's 100% working everything - you guys ruleeeeeee:)

[uzih]

Hi,

I have updated the SPL to spl 1.30.olipro, ran the CID/SIM unlocker successfuly, but when I flush the ROM, It still fails on 28%

any idea?

Thanks in advance

[Arilexed]

Hi,

I have updated the SPL to spl 1.30.olipro, ran the CID/SIM unlocker successfuly, but when I flush the ROM, It still fails on 28%

any idea?

Thanks in advance

Yes, use this CID unlocker instead: http://forum.xda-developers.com/showthread.php?t=293957

[racerx_]

Olipro-

a couple of people are posting that their radios didn't update when they used hard-spl 1.30. could this be a bug in the hard-spl, or unrelated issue?

they posted here (http://forum.xda-developers.com/showthread.php?t=316098&page=7).. see post #66

[Olipro]

Olipro-

a couple of people are posting that their radios didn't update when they used hard-spl 1.30. could this be a bug in the hard-spl, or unrelated issue?

they posted here (http://forum.xda-developers.com/showthread.php?t=316098&page=7).. see post #66

unrelated issue

[stebbo69]

Olipro-

a couple of people are posting that their radios didn't update when they used hard-spl 1.30. could this be a bug in the hard-spl, or unrelated issue?

they posted here (http://forum.xda-developers.com/showthread.php?t=316098&page=7).. see post #66

I wouldn't necessarily call it a bug in hard-spl as there are too many variables at play, but putting on Des' SPL triggered something to allow my radio to finally update, first time, after it failed with hard-spl1.30 installed probably 30 times trying different combinations of radios, ROMs, locks and update methods.

If your radio refuses to update despite the upgrade procedure going smoothly,
and you've got guts, temporarily pop on Des' SPL for the radio upgrade, then put hard-spl back on - it might work for you too.

[cicciocant]

Olipro-

a couple of people are posting that their radios didn't update when they used hard-spl 1.30. could this be a bug in the hard-spl, or unrelated issue?

they posted here (http://forum.xda-developers.com/showthread.php?t=316098&page=7).. see post #66

I confirm this

With HARDSPL 1.30 no upgrade radio.
With sspl yes upgrade radio..

If I have in the .nbh file rom+radio+extended, rom + extended rom upgrade but radio don't upgrade.

[racerx_]

unrelated issue

thanks for your reply.. any thoughts on this issue? we've got threads popping up now in the forums about it, and noobs flashing radios without hard-spl to get around the problem...

[sammy_deluxe]

I wouldn't necessarily call it a bug in hard-spl as there are too many variables at play, but putting on Des' SPL triggered something to allow my radio to finally update, first time, after it failed with hard-spl1.30 installed probably 30 times trying different combinations of radios, ROMs, locks and update methods.

If your radio refuses to update despite the upgrade procedure going smoothly,
and you've got guts, temporarily pop on Des' SPL for the radio upgrade, then put hard-spl back on - it might work for you too.switched back to Hard-SPL 1.20 and now i can flash radio rom.

[nizoudj]

file not worked
damage your poket

[atropo]

What file?

[eelpout]

so, god help me, I'm about to embark on flashing my P3600 to WM6, because I just can't help myself and I need more stress in my life. :p

but I'm wondering if anyone out there *has* successfully flashed their radio using Hard-SPL 1.30? or should I save myself some time, flash with 1.20 first, then the radio, then 1.30 before doing the main ROM? any negatives to doing it that way?

thanks.

[eelpout]

OK, I'll reply to my own post. I gave it a go with 1.30 first... it didn't work for me either for the radio flash. I had to fall back to 1.20. :(

[Cookie999]

Soooo..............

I have read the whole of this thread and fully admit to being totally confused now as to which way is best!!!!!!!

If I am only wanting to flash a new Radio (currently have a vanilla Orange M700) and NOT a new ROM, would I be better:-

- using Hard-SPL v1.20?
- try using 1.30 & see what happens?
- using Des's SPL?

Cheers

[Olipro]

Seems a lot of you can't flash a radio; tell me, is there anyone who can?

to give you guys a bit of background to the issue:

the SPL has built in codes that it reads from the NBH which it uses to determine how to handle each segment of the NBH, for example, 400/401 is for the OS and is accordingly flashed to the OS space. the radio is 300 (if memory serves) and hence if the MFG SPL is configured with a different code, it won't recognise it.

pof sent me the SPL and I had no reason to suspect there would be anything different in it.

unfortunately (for you guys) I'm currently on holiday and so I don't have access to my dump of this SPL, so you'll have to wait till September for me to check it out. what I think I'll do is once I discover why the radio won't flash (hopefully due to a different code) I'll patch the code to match the one of regular SPLs, which should fix the issue.

Cheers,
Olipro

[Sub-Woofer]

Hi! I hope this question is not too silly .... :rolleyes:

I have to return my trinity to the service and have already flashed the original WM5-ROM (german) to my trinity, but I can't get rid of the Hard-SPL V1.30. I would like to return to the original bootloader. I think I have searched many articles, but I didn't found a solution. Can anybody help me, perhaps with a link to the needed files?
Thanks in advance!

Bye, Peter

[lumzum]

thank you for innovation

[sammy_deluxe]

Hi! I hope this question is not too silly .... :rolleyes:

I have to return my trinity to the service and have already flashed the original WM5-ROM (german) to my trinity, but I can't get rid of the Hard-SPL V1.30. I would like to return to the original bootloader. I think I have searched many articles, but I didn't found a solution. Can anybody help me, perhaps with a link to the needed files?
Thanks in advance!

Bye, PeterYou have to flash the german rom with the english RomUpdateUtility.

[Sub-Woofer]

You have to flash the german rom with the english RomUpdateUtility.

You're my hero ;)
Thanks al lot, it worked (of course).

Bye, Peter

[usman3206]

hi
i just flashed my HTC3600 to windows mobile 6 but lost my tomtom besides i m ipakistan these days; so can some one help me how can i restore GPS on my device and how can it work in pakistan or saudi arabia: thanks

[T-Rob]

Hi! I hope this question is not too silly .... :rolleyes:

I have to return my trinity to the service and have already flashed the original WM5-ROM (german) to my trinity, but I can't get rid of the Hard-SPL V1.30. I would like to return to the original bootloader. I think I have searched many articles, but I didn't found a solution. Can anybody help me, perhaps with a link to the needed files?
Thanks in advance!

Bye, Peter

check: http://trinityguides.info/index.php?option=com_content&task=view&id=29&Itemid=67

[walterjm]

yep, that's exactly it, once you have Hard-SPL, there's no need to bother with CustomRUU any more.

OK I don't get it????

I followed the instructions and it worked and then I ran the official AUS / NZ WM6 rom and it keeps stopping at 28%

am I missing somthing else??

[mobark]

Thanx man and good gob

[ale.agos]

Hello everybody and thanks for all info you gave us on this forum...

I'm totally new to Trinity and as first job to do I was trying to upgrade mine Radio ROM. For doing that in a safe mode I've read that could be better have Trinity upgraded to Hard-SPL 1.3 (now mine SPL is 1.23).

Doing that by using files on this forum I've got the problem of "246 error" and also if I try to re-load Hard-SPL when Trinity is in bootloader mode (three colours screen) anything happen or better I've the slider on screen who tell me that upload is going OK but it is faster ad reach 100% in few seconds and anything change...

I did the above operetions many times so I don't think that if I will try again I will able to solve...

Maybe could be better if I use Hard-SPL 1.2 instead 1.3? If yes where can I find it?

Thanks a lot for every suggestions!

Alex

[racerx_]

if your trinity is manually put in bootloader mode with hard-spl on it, then even though you run the RUU for a new hard-spl it won't be overwritten..

if you want to overwrite the hard-spl, you need to load it without manually entering bootloader

[lolek74]

I have HTC P3600i unit and I cant upgrade to hard-spl. Everytime I try Defice blanks out and loses connection to PC and then few seconds later I get connection error and have to soft reset unit to get it running again.

HTC P3600i
ROM version: 3,00.707.18
ROM date: 24/07/07
Radio version: 1.46.30.11
Protocal: 32.79.7020.19H

TRIN100
IPL-1.00
TRIN100
SPL-3.03.0000

[stepw]

HSPL is actually relying on SSPL to bypass firmware image signature verification.
SSPL doesn't work if your current SPL is 3.0.

[ssamth2003]

HSPL is actually relying on SSPL to bypass firmware image signature verification.
SSPL doesn't work if your current SPL is 3.0.


Then , what solution to do pls advise urgentely. thks in advance.

[daeveman]

HSPL is actually relying on SSPL to bypass firmware image signature verification.
SSPL doesn't work if your current SPL is 3.0.

I was just about to Hard SPL my Dopod when I came across this information. Thank you.

Is there anyway to solve this issue?

[dorittos]

Have just got my trinity, so here a very newbie question.
My phone is factory uncloked, so do I need to use hard-spl before trying to upgrade my rom to wm 6?

Thanks

[ssamth2003]

keep searching and waiting for the solution, still dont find....

[megatron7]

I had the same problem with loosing connection and error 46. Starting the ROMUpdateUtility again (with this funny colored screen on the trinity) solved the problem. Even without connection from active sync (this program crashed while restarting), the update continued.

Not sure if this is also your problem or just a solution to a lamer problem :D

[ViVaViVa]

Pardon me if this was asked before, but how do I get Hard-SPL on my Trinity under Windows Vista? I keep having the 260 error (no connection) after the tri-color-screen appeared.

[zkhmcknol]

Hi,

I followed the intructions on the screen and confirmed on the device (which the installer suggests) to accept the file for installation, had an Activesync connection , battery charged 80%, USB cable connection was working. Then the screen chaged to the simple USB color scheme (for the ROm update i guess) the Amber light which was constantly on (as charging status though USB), switched off and nothing happened anymore. The installer came back with an error and said that i should check my USB connection as it couldn't communicate with the device.Restarted phone. The Phone is NOT dead and working as the ROMupdate was not competed. When i tried it again, the phone doesn't ask to confirm the installer but goes straight to the simple USB color scheme for the ROMupdate and doesn't respond, the ROM update utility again comes back that i should check the SB cable as it could not establish a connection

Any suggestions?!?!??!?

Running Windows Vista 64 (legitimate), Intel DUAL core E4350, 2Gb internal memory, Gigabyte P35 DS4 motherboard.

Greetz,

zkhmcknol

[battaglia99]

You have to start a second time the upgrade process without disconnect the pda after getting the non connection error... i guess!

[ViVaViVa]

zkhmcknol asks the same thing as I did above, and no it does not work the second time. I know some rominstallers DO work with Vista, it's just a matter of updating the rominstaller-exe.

[ViVaViVa]

zzzzzzzzzz

[Polletje]

Hi all, first of all big thumps up for all the hard work everyone is putting into this forum.

I'm trying to upgrade my M700 to WM 6 and not brick it I'm using Hard-spl 1.2
but during the installation of it I receive the following error:
error [270]
the image file is corrupt

Anyone an idea how to fix this?

[Polletje]

Well I do, now....

I hard reset my M700 and now I have WM 6!

[msoleil]

thans a lot:)

[Jackuuuuu]

Hi all, first of all big thumps up for all the hard work everyone is putting into this forum.

I'm trying to upgrade my M700 to WM 6 and not brick it I'm using Hard-spl 1.2
but during the installation of it I receive the following error:
error [270]
the image file is corrupt

Anyone an idea how to fix this?

I have the same problem with my HTC p3600i (WM6)

Help

[c4b3l3r4]

Thanks!
so, to install the hard SPL i need first use the Splxploit to unbrick and enter the trinity in bootloader mode, is that correctly?

bye

[fazluke]

if your trinity is manually put in bootloader mode with hard-spl on it, then even though you run the RUU for a new hard-spl it won't be overwritten..

if you want to overwrite the hard-spl, you need to load it without manually entering bootloader

I have the same problem, could you please explain how to load hard spl without manually entering the bootloader.
I am trying to load 1.3 over

TRIN100
IPL-SSPL by Des

TRIN100
SPL-1.07.ds

Thank you,

[racerx_]

well, what you wrote doesn't exactly make sense.. 1.07 is the default factory bootloader, so just run the Hard-spl installation..

if you're having trouble, put SSPL on your phone (there's a sticky in this forum) and run it.. then run the RUU for the hard-spl you want.

for more info go to trinityguides

[racerx_]

olipro-

just curious.. are we ever going to see an update on hard-spl since 1.30 was causing some problems?

[hungusa]

Please help !
I have error on HTC P3600 "270" when I try to Hard_SPL 1.2
I also try 1.3 and Des's Crash-Proof SLP. It has same error.

Thanks

[Chrismo]

Hi,

I'm a newbie to flashing but i got a HTC Tyn II and i followed every guide i could find and i keep comming that i first need to do the HARD-SPL. But when i do this it say's on my HTC that it needs to run the hard-spl. So i click yes then the screen turns white and it does not response on anything. I Need to take my batry out of it and back and then it just start windows mobile but i can still not flash it.

Please help me!

[moradb]

Thanks for your solution :)
For one second I thought your solution works.:(
My PDA show me 100% but after that I had an error Message 270.:confused:


OK, new version of Hard-SPL, this one is based on an MFG; seems HTC popped a stealth CID-check process in this, bastards, found and patched it anyway though.


CURRENT FEATURES
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-rtask commands enabled
-lnb command enabled
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.30.Olipro

Version 1.30:
-Fixed SPL protection bug
-rtask commands enabled
-based on an MFG SPL

Version 1.20 - initial release
-Initial version; has all features except those in newer version


Download below, enjoy!

[twoace]

Thanks a lot for your great tools! :)

BR,
TwoAce

[liamhere]

deleted post got my m700 working again :)

[garlog]

Could someone tell me the difference between Hard-SPL and SSPL?

[ronny4321]

just keep the device connected to usb, leave it in the tri-color (bootloader) screen and restart the Rom Update Application. if in doubt, follow this guide (http://trinityguides.info/index.php?option=content&task=view&id=21)

Thankyou this seems to have worked
ronny

[xxx000xxx]

OK, new version of Hard-SPL, this one is based on an MFG; seems HTC popped a stealth CID-check process in this, bastards, found and patched it anyway though.


CURRENT FEATURES
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-rtask commands enabled
-lnb command enabled
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.30.Olipro

Version 1.30:
-Fixed SPL protection bug
-rtask commands enabled
-based on an MFG SPL

Version 1.20 - initial release
-Initial version; has all features except those in newer version


Download below, enjoy!
good ,i will try it and help me solve my bricked problem

thx

[Alechsej]

Hi,
i have a problem, everytime i try to flash, i get a question on my phone"do you want to allow unrecognized programms to...." if i press yes the tri-color display appears, but the programm on my Laptop doesnt progress and there isnt any progressbar on the trinity anymore, after about 30 sec i get a notification on my laptop that the connection is lost?!

what do i wron or what can i do bether ?

[raf1987]

ok, just want to make it short: (P3600 user)
1. I have WM6.1 ROM (FleNover 3.3 Black edition) installed.
2. When I want to downgrade to WM6 official, after 20% it goes error.
3. Now, it only shows 3 colors.
4. Here is my PDA information in 3 colors:
TRIN100
IPL-1.00

TRIN100 MFG
SPL-1.30.Olipro
5. When I want to upgrade with WM6 official, after my PDA shows the progress bar, it restarted and the update screen shows Error 286.
6. How do I fix it?

thank you very much

[drnibbles]

I'm trying to upgrade my p3600i I'm using Hard-spl 1.2
but during the installation of it I receive the following error:
error [270]
the image file is corrupt

Anyone an idea how to fix this?

[XL3N7]

This is for P3600, not P3600i.

[drnibbles]

Oups... sorry... and i just saw the thread about the fact that one can't HradSPL the 3600. Thanks..

[guille1977]

First of all, I'ld like to thanks all of you for your great work.
I'm sorry about my english, I'm spanish, and there isn't easy to me to explain my problem.

Well I have a htc s300 that a friend of mine gave to me because he could't repair. He tall me what happens until the pda stop working.

1. First, he change de rom of vodafone for one of wm6 and the pda become bricked.

2. After he try to restore with other rom, he don't remember which one, and the screen was black working only with de leds.

3. Finally, he try to open de pda to watch if all its component was right.

At the end, when he gave me de pda, the screen wasn't working, no leds, nothing on screen.

I try to make soft reset, hard reset event boot menu, the one of 3 color, I think the pda is working because the usb is enable when I put the pda in boot menu, but i don´t see anything. I olso try to see the screen to find something broked, but the screen is perfect.

I try everything a read, splxploit, mtty, and several hard spl, olipro 120, crashproof, etc.

I would like to ask you if you think there is a problem with spl ipl or maybe screen broken or maybe other problem.
Thanks anyway for the help you can bring me and I'm sorry again about my poor english

[guille1977]

with the splxploit i saw that the information of the ipl wal 0.50 but the information of the spl was error in memory position.

with the mtty, i try several times task 28, i think is format command, well, the most of my tries, the mtty was brocked, some of then it finished the task, maybe the problem is in the board.

I would like to know if I can try anything, or if just brocked as well. Thanks.

[hackers4]

Ok...I am thoroughly confused. I've read all 16 pages of this thread and have no clue where to go. I tried updating my p3600 to wm6 w/o hard-spl and it locked...then unlocked with splxploit, then tried to run hard-spl to then update to wm6 but i am getting the "error 270 image file is corrupt" message. I then saw a post saying that you cannot hard-spl the p3600 (trinity). Can someone please clarify this for me? Either in this post or in a pm. Thanks a ton.

[Sethide]

Hi,

Which Hard-SPL are you using?
If 1.3 Olipro, revert o 1.2 by following this:
http://trinityguides.info/index.php?option=com_content&task=view&id=10&Itemid=67
Good Luck

[elmagnifico2bad]

Hello,

I currently have OliPro 1.30 and for some reason I am unable to boot normally. My Trinity is stuck in Windows booting screen. I can however enter the bootloader and do anything in there.

I was thinking of uploading a new radio but the upload process just remains at 0%. After canceling the process the phone is stuck in bootloader and I have to "unbrick it" with splxploit. When it first restarts from splxploit I can see in the bootloader SPL-1.20.Olipro but this reverts to Olipro 1.30 after another reset.

Is there any way I could downgrade to Olipro 1.20 from bootloader?

Thanks

[shym]

You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632

And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66

[demon83ft]

Hi Olipro,

Could you look into this :

http://forum.xda-developers.com/showthread.php?t=399827

and this :

http://forum.xda-developers.com/showthread.php?t=399791

when you get a chance?
It seems the HARD SPL for P3600i is not working on all P3600i. Is that possible?!

Can you help by any chance?

Rob

[wssoo]

I think it is best to PM olipro as well.. But anyhow I did PM olipro before.. Still waiting for his reply..

[puiutz_bv]

I tried updating my p3600 to wm6 w/o hard-spl and it locked...then unlocked with splxploit, then tried to run hard-spl to then update to wm6 but i am getting the "error 270 image file is corrupt" message.
TRIN100 IPL-0.50 SPL-1.07.0000
help me please

[Goranchen]

hi , anyone ,
Pls , help , I think I f...d my pda: I don't know what I did exactly, ths morning but it stunned at the beggining ; the only thing I can see on the screen is :

m05 R 1.29.00.01
G 32.62.7020.06H
B05 D 3.18.YK

I realy don't have a clue what do do : I kept doing the soft reset but it is not helping ; I think I have a brick in my hands . Can somebody please advise ... ?
:eek:

[gsmhackerns]

Finaly work

Cmd>rtask 4

Cmd>rtask 7
Enter Radio Image
AT-Command Interpreter ready
0
atv1

OK
AT@talk?1

@TALK: 00003B3F

OK
AT@talk?0

@TALK: 00005176

OK
AT@TALK=270F,270F

OK

[zoko]

hello ppl recently a had a litle problem run my roms, few worked fine, others don´t boot!
a run the the mtty (task 2A) = Block 0x52(82) is BAD block !!! i don´t now if this is responsable for that! i would like to somebody give me a help! for that question!
tks

[yoenoesz]

Does this only flash Trinity or more HTC's? (Every HTC) ?

Thanks

[Andre_Santarell]

can I have hard-spl 1.20 link?

[limlaw]

Hi Oilpro, thank you for putting up this, I had been working my dumb P3600 for 12 hours still no luck getting this up, in the end i manage to find out it was due to bad block that seats on on radio rom itself! The moment I power up my device it goes to flash the logo and stays black screens. I had tried running task 2A in mtty.exe keeps showing. Check block : 102 - Bad nothing is done.

info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x66(102) is BAD block !!!

Appreciate if you could help me, I am handicapped without my lovely P3600, now I am bad back to early 2000 using the dumb nokia phone.

Thank you.
Cheers buddy.

[cellularry]

any hard spl for Touch 3G 1.40

[esmeraldalm]

ok, so everytime i try to download the HardSpl my phone turns off. I get this message "The program is from an unknown publisher. Running it can possibly harm your device. Do you want to continue?" When i hit yes my phone turns off.

[beond86]

hi everyone. When I start olipro 1.20 in the end of operation i'll have the error 270... how i must to do?
tnx

[jochemr]

IT & Smartphones at http://www.comcom.nl ;)

Why not?

[dankpb]

Is there any way of making this work using Vista and it's device manager? Or does it need to be done usind XP and autosynch, or could it be done using mini-SD. I'm pretty much a newby at this kind of thing - and have posted on several threads, so replying in only one of them will be fine (sorry if I'm a bother)

Dankpb

[bigrockshow]

i've upgarded to custom rom but the rom does not go pass the HTC screen and hangs there.

Could someone help me out ?

i'm using SPL 1.3olipro and upgraded radio

[bilal shah]

Thanx Dear

[dasferg]

Hi

Managed to brick my phone when updating the rom. I have tried to use splxploit but I a noob (an old one at that!) and I seem to keep getting an error that says "The Image file is corrupt" when trying to load a new rom.

The process I have been using is
1. run splxploit
2. when it finds an exploit it asks me for the path of a file

My question is, what file to use. I tried olipros and des crashproof but to no avail. What should the file look like?.For eg RUU#$@$%^^^ I have tried to show the screen

Any help appreciated THANK YOU

[dasferg]

Haaallllpppp!!!:eek::eek:

[vjmobile]

thank :):):):):)

[ZakMcRofl]

Do NOT use Hard-SPL 1.30. It has a bug that prevents flashing of radio rom.
Instead use Hard-SPL 1.20 (http://www.mediafire.com/file/jmmrmqj2yjm/Hard-SPL_1.20.rar) or DES' Crash-Proof SPL (no link, sorry).

@Olipro: this is a major bug, why is 1.30 still linked in your original post? Reflashing radio rom is one of the most frequent recovery tasks.
Please consider adding this info to your first post and discourage users from using 1.30.
Thanks

[M@rcop2]

hy i have the same problem , splash screen stopped, bad blokS...,and i can't installed any other coocked rom... i've olipro 1.20....... anyone resolve this problem PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE !!!!

[xiyan2127]

Do NOT use Hard-SPL 1.30. It has a bug that prevents flashing of radio rom.
Instead use Hard-SPL 1.20 (http://www.mediafire.com/file/jmmrmqj2yjm/Hard-SPL_1.20.rar) or DES' Crash-Proof SPL (no link, sorry).

@Olipro: this is a major bug, why is 1.30 still linked in your original post? Reflashing radio rom is one of the most frequent recovery tasks.
Please consider adding this info to your first post and discourage users from using 1.30.
Thanks

I flashed the 1.30 hard spl and now i cant flash the 1.20 hard spl. when i try to flash the 1.20 it just restarts to the tri-color screen. how can i fix this help please i cant install any roms too.

[xiyan2127]

switched back to Hard-SPL 1.20 and now i can flash radio rom.

How did you switch it back to hardspl 1.20. i cant get back to hard spl 1.20. i flashed 1.30 and now my radio doesnt upgrade. pls explain how you did it. when i try to do it the process starts but then it just restarts and goes back to tri-color screen.:mad:

[xiyan2127]

Guys i figured how to go to back to hard spl 1.20 from bootloader stuck hard spl1.30 mode. here is what i did:

1. i was stuck on bootloader with the 1.30 hardspl and neither soft reset or hard reset helped me kick off bootloader mode ( tri-color mode)

2. i flashed my original windows mobile 5.0 ROM (RUU_Trinity_DOPODASIA_WWE_1.23.707.6_6275_1.35.00 .11_108_Ship) using the sspl rom update utility onfor vista since i am using windows 7x64 bit, to my trinity and god helped me. my trinity kicked out of bootloader and rebooted in to windows mobile 5.0.

3. downloaded hard spl 1.20 and flashed. Phew!!!
and my radio is upgrading now.

one more question will the hard spl be removed or messed up if i use the sspl rom update utility for vista i found when i was searching the forum?

other than that everythings fine now. thank god and the super duper xda dev forum for helping me.:D

[bruno r]

update error [270]

[bruno r]

Hi

Managed to brick my phone when updating the rom. I have tried to use splxploit but I a noob (an old one at that!) and I seem to keep getting an error that says "The Image file is corrupt" when trying to load a new rom.

The process I have been using is
1. run splxploit
2. when it finds an exploit it asks me for the path of a file

My question is, what file to use. I tried olipros and des crashproof but to no avail. What should the file look like?.For eg RUU#$@$%^^^ I have tried to show the screen

Any help appreciated THANK YOU

Same problem here.. i'v tryed almost everithing..:mad::mad:

[durbanite]

Hi am new to all this , can someone explain to me that when I try to run I get this message-"VISTA_RUU_TRINITY\EnterBootloader.exe is not a valid Win32 Application"
I have VISTA OS on my Laptop and I want to redo the rom on my Trinity Phone
Many thanks Keith
Durbanite

[Nummer5]

Hi!

I use my two Trinity since a long time with different ROMs without problems.
On my TRIN i have HSPL 1.2. But now one drives me crasy :eek:

It crashes some times, so i flash back org. WM5 but it doesn´t work over USB.
I try to update with SD and it works. Looks like original, old RADIO and SPL.
Next i try to install again HSPL 1.2 but i always get a connection error after SoftSPL comes up.
So i flash Olipro 1.2, Radio 1.56.70.11 and WM6.1 by SD.
Now all looks and works fine but i can still not flash over USB.
What did i wrong?

Greetings,
Nummer5

[SergioKool]

hi it always giving me the error 206 when trying to flashing when is in tricolor booloader can somebody help me get through this :( i want to update my radio on this htc :(

[stray]

i got a problem with my p3600

when i go to bootloader i get this:

TRIN100
IPL-0.50

TRIN100
SPL-1.07.0000


i tried to install the olipro 1.3 and i get error 270. I tried the splxploit and i get it right 2 times in 10 tries, and then when i tried to install olipro e get error 260 or error 270.

anyone got any ideas how to fix it ? and install the last version of olipro?

tks
stray

[davidmore]

i got a problem with my p3600

when i go to bootloader i get this:

TRIN100
IPL-0.50

TRIN100
SPL-1.07.0000


i tried to install the olipro 1.3 and i get error 270. I tried the splxploit and i get it right 2 times in 10 tries, and then when i tried to install olipro e get error 260 or error 270.

anyone got any ideas how to fix it ? and install the last version of olipro?

tks
stray

Ok ,
you can find to install this SSPL by Des on your device and then run it.
After that, you can upload your HSPL.
It have solved many my similar situation.

Here is the tread:
http://forum.xda-developers.com/showthread.php?t=293632

David More :)

[benjyto]

thnk's, :)

[limesoft]

My p3600 able to go in to bootloader (tricolor mode) but it always show serial, no mater how many time i try to switch my USB port, my P3600i able to detect USB under bootloader mode