sugerbugar007@comcast.net
5th April 2007, 07:48 PM
SAMSUNG
Unlocking:
If you have Rev 1.5 (x426) or earlier and most older models
Use the *#9998*3323# Trick (look for it on the forum)
The *#1111*WHATEVER# code will NOT work
If you have Rev 1.6 (x426) or later and most newer models
You MUST use unlocking software. Codes WILL lock your phone FOREVER
Locked: Return for Servicing
There is only 1 working solution, you must flash a copy of the firmware that is not in the locked status. (Most) Unlocking programs will NOT disable this issue, and your service provider cannot give you a code
If you do not plan to use your phone with another service provider, there is no real point to unlocking your phone other than to sell it. If you don't need to unlock it, don't take the risk of disabling the phone altogether
The *#9998*3323# Method:
1. If you have changed your phone password, change your password back to the default 8 zeros (00000000).
2. Put a SIM card that is from a network other than the one your phone is locked to
3. When Incorrect SIM error comes up, type *#9998*3323#.
4. White screen will appear with an exit option. Press the right softkey.
5. From the menu that appears, select the Malloc Fail option. This will reboot the phone and the normal service screens will appear.
6. Type *0141# and then press the green call key. "Personalization" or "Personalized" will appear.
7. Turn off your phone and put the original SIM back in.
8. Turn on your phone. You will receive a prompt to enter a password.
9. Type 8 zeros (00000000)
10. Completed. You have now unlocked your phone.
Cerebros Instructions:
1. Make sure phone is plugged into cable, cable is plugged into computer, drivers are installed, and phone is on.
2. Start Cerebros Unlocker 1.5
3. Click the "Models" drop-down box
4. Select your model from list (q100 = x426/x427)
5. Press Unlock
6. Wait until finished and unplug phone
7. Remove battery, replace, and turn phone on
8. Phone is now unlocked
WinIMEI Instructions:
1. Make sure phone is plugged into cable, cable is plugged into computer, drivers are installed, and phone is on.
2. Start WinIMEI
3. Make sure U.S.A. (Voicestream), A Line, 1 PC, and the com port you are using are selected from the appropriate drop-down menus.
4. All selection boxes should be unchecked
5. Click Write IMEI in the bottom center
6. From the new screen that appears click RD IMEI Setting
7. Wait for TestModeOn Pass and the box in the upper right to display Pass and turn green before proceeding
8. Click UnLock from the button cluster in the bottom right
9. Click both Exit buttons and disconnect phone
10. Your phone is now unlocked
Note: All previously listed programs and an unlocked version of the x426 rev 1.6 firmware and optiflash (for flashing it) are available at my site: http://www.personal.psu.edu/sjs342/Midnight/index.html
================================================== ================================================== ======================
1. Turn off your phone, put in a SIM of a provider that it is NOT LOCKED
(difference company's SIM card) to, and turn it back on.
2. At the wrong card message, type *#9998*3323#. A message will pop up telling you to press exit,
so hit the right soft key. Choose number 7 . Your phone will
reboot and your SIM will work.
3. Type *0141# and then hit call. This will give you a message saying your phone is personalized.
4. Power down your phone and insert a SIM card other(another company) than the one that is in it.
Then power back up your phone.
5. At the SIM pass code prompt type 00000000, that is 8 zeroes. So that will totally UNLOCK your phone.
Model: Samsung SGH2100
*2767*3855#
*2767*2878#
Model: Samsung V200
*2767*7822573738#
Samsung SGH-E700 new model and X100
#*7337#
Model: Samsung SGH600
*2767*3855#
*2767*2878#
Model: Samsung A300
*2767*637#
Model: Samsung A400
*2767*637#
Model: Samsung A800
*2767*637#
Model: Samsung E500
*2767*688#
================================================== ================================================== ===============
Some of the other codes listed (besides 3323) can damage your phone.
Also, Not every phone is capable of the 3323 method and there is no guarunteed way to unlock these phones using codes alone
================================================== ================================================== ====================================
Thu Feb 22, 2007 5:29 am
Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
if the 1st didnt work try putting a non accepted sim and type *2767*3855# phone will reboot and should b ok
:p
Unlocking:
If you have Rev 1.5 (x426) or earlier and most older models
Use the *#9998*3323# Trick (look for it on the forum)
The *#1111*WHATEVER# code will NOT work
If you have Rev 1.6 (x426) or later and most newer models
You MUST use unlocking software. Codes WILL lock your phone FOREVER
Locked: Return for Servicing
There is only 1 working solution, you must flash a copy of the firmware that is not in the locked status. (Most) Unlocking programs will NOT disable this issue, and your service provider cannot give you a code
If you do not plan to use your phone with another service provider, there is no real point to unlocking your phone other than to sell it. If you don't need to unlock it, don't take the risk of disabling the phone altogether
The *#9998*3323# Method:
1. If you have changed your phone password, change your password back to the default 8 zeros (00000000).
2. Put a SIM card that is from a network other than the one your phone is locked to
3. When Incorrect SIM error comes up, type *#9998*3323#.
4. White screen will appear with an exit option. Press the right softkey.
5. From the menu that appears, select the Malloc Fail option. This will reboot the phone and the normal service screens will appear.
6. Type *0141# and then press the green call key. "Personalization" or "Personalized" will appear.
7. Turn off your phone and put the original SIM back in.
8. Turn on your phone. You will receive a prompt to enter a password.
9. Type 8 zeros (00000000)
10. Completed. You have now unlocked your phone.
Cerebros Instructions:
1. Make sure phone is plugged into cable, cable is plugged into computer, drivers are installed, and phone is on.
2. Start Cerebros Unlocker 1.5
3. Click the "Models" drop-down box
4. Select your model from list (q100 = x426/x427)
5. Press Unlock
6. Wait until finished and unplug phone
7. Remove battery, replace, and turn phone on
8. Phone is now unlocked
WinIMEI Instructions:
1. Make sure phone is plugged into cable, cable is plugged into computer, drivers are installed, and phone is on.
2. Start WinIMEI
3. Make sure U.S.A. (Voicestream), A Line, 1 PC, and the com port you are using are selected from the appropriate drop-down menus.
4. All selection boxes should be unchecked
5. Click Write IMEI in the bottom center
6. From the new screen that appears click RD IMEI Setting
7. Wait for TestModeOn Pass and the box in the upper right to display Pass and turn green before proceeding
8. Click UnLock from the button cluster in the bottom right
9. Click both Exit buttons and disconnect phone
10. Your phone is now unlocked
Note: All previously listed programs and an unlocked version of the x426 rev 1.6 firmware and optiflash (for flashing it) are available at my site: http://www.personal.psu.edu/sjs342/Midnight/index.html
================================================== ================================================== ======================
1. Turn off your phone, put in a SIM of a provider that it is NOT LOCKED
(difference company's SIM card) to, and turn it back on.
2. At the wrong card message, type *#9998*3323#. A message will pop up telling you to press exit,
so hit the right soft key. Choose number 7 . Your phone will
reboot and your SIM will work.
3. Type *0141# and then hit call. This will give you a message saying your phone is personalized.
4. Power down your phone and insert a SIM card other(another company) than the one that is in it.
Then power back up your phone.
5. At the SIM pass code prompt type 00000000, that is 8 zeroes. So that will totally UNLOCK your phone.
Model: Samsung SGH2100
*2767*3855#
*2767*2878#
Model: Samsung V200
*2767*7822573738#
Samsung SGH-E700 new model and X100
#*7337#
Model: Samsung SGH600
*2767*3855#
*2767*2878#
Model: Samsung A300
*2767*637#
Model: Samsung A400
*2767*637#
Model: Samsung A800
*2767*637#
Model: Samsung E500
*2767*688#
================================================== ================================================== ===============
Some of the other codes listed (besides 3323) can damage your phone.
Also, Not every phone is capable of the 3323 method and there is no guarunteed way to unlock these phones using codes alone
================================================== ================================================== ====================================
Thu Feb 22, 2007 5:29 am
Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
if the 1st didnt work try putting a non accepted sim and type *2767*3855# phone will reboot and should b ok
:p