afullana
6th April 2007, 09:36 AM
Hello,
it was updating the ROM of my s200 and failure to load, since then it only leaves the welcome screen and it does not get to load SO never.
I have read threads of xda-developers, download romupdate, mtty and ntrw, with romupdate i connect with s200, but I cannot restore the ROM.
Also I have tried it the other way around: to overturn a new ROM in card SD and to put it in s200 so that carge of automatic form, but does not make case. Attached log of romupdate, in seems that it connect thes200 and in a while it even says to me that puts the SD card. If attempt the command usb says that this to me in usb already. somebody has been able to happen of this point? Thanks and greetings.
Sorry for my english.
-------------------------
IPL 2.09
SPL 2.20
------------------------
Cmd>info 0
GetDeviceInfo=0x00000000
Prophet
Cmd>info 1
GetDeviceInfo=0x00000001
2.20.0000
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x7AC00000 Bytes
HTCSPROQTK35 RHTCE
Cmd>usb
I already connect to USB!
Cmd>l
clean up the image temp buffer at 0x8C100000 Length 0x03900000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>d2s 80000000 02000000
Invalid command : d2s 80000000 02000000
For a help screen, use command ? or h
Cmd>r2sd all
R2SDBackup() Pls. insert SD card !!
Cmd>r2sd all
***** user area size = 0x7AC00000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
it was updating the ROM of my s200 and failure to load, since then it only leaves the welcome screen and it does not get to load SO never.
I have read threads of xda-developers, download romupdate, mtty and ntrw, with romupdate i connect with s200, but I cannot restore the ROM.
Also I have tried it the other way around: to overturn a new ROM in card SD and to put it in s200 so that carge of automatic form, but does not make case. Attached log of romupdate, in seems that it connect thes200 and in a while it even says to me that puts the SD card. If attempt the command usb says that this to me in usb already. somebody has been able to happen of this point? Thanks and greetings.
Sorry for my english.
-------------------------
IPL 2.09
SPL 2.20
------------------------
Cmd>info 0
GetDeviceInfo=0x00000000
Prophet
Cmd>info 1
GetDeviceInfo=0x00000001
2.20.0000
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x7AC00000 Bytes
HTCSPROQTK35 RHTCE
Cmd>usb
I already connect to USB!
Cmd>l
clean up the image temp buffer at 0x8C100000 Length 0x03900000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>d2s 80000000 02000000
Invalid command : d2s 80000000 02000000
For a help screen, use command ? or h
Cmd>r2sd all
R2SDBackup() Pls. insert SD card !!
Cmd>r2sd all
***** user area size = 0x7AC00000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>