PDA

View Full Version : a big problem on my 838pro


kwokyingho
7th April 2007, 09:07 PM
i have same problem on my Dopod 838pro(HK ver),
my 838pro shows "No GSM" when booting..
i tried the solution from http://wiki.xda-developers.com/index...blems#problem5,

i download 838pro rom(HK ver) to SD card and boot it, just shows "Checking....." message, i wait for long times still no respons.......

all upgrade programes (e.g. ROMUpgradeUt.exe,MaUpgradeUt_noID.exe) can't connect with 838pro.....

when i open mtty.exe and i try to type below command
------------------------------------------------
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3FB(1019) is Reversed block

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x1EB00
Partition[3], type=0x4, start=0x21B00, total=0x18D00

CE Total Length(with sector info) = 0x446D800
CE CheckSum Length(without sector info) = 0x4360000
===============================================
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation

CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
============================================
but another command(task32, info 2,info 3....etc ) is no respone and hang......


any expert can help me?thanks

compuman
8th April 2007, 12:38 PM
You can get your 838Pro to SIS(Dopod International Hong Kong Authorized Service Centre) to repair.
I have the same problem(No GSM).They said my 838Pro's mainboard damaged......need to change(but need to wait coz no board to change.....:( :( :( )

kwokyingho
8th April 2007, 08:05 PM
You can get your 838Pro to SIS(Dopod International Hong Kong Authorized Service Centre) to repair.
I have the same problem(No GSM).They said my 838Pro's mainboard damaged......need to change(but need to wait coz no board to change.....:( :( :( )

needs any charge? ...............

mrvanx
8th April 2007, 08:20 PM
Could you run mtty and run the "checkimage" command.

Post the results here for us??

Olipro
8th April 2007, 08:20 PM
go to the wiki, recover using the KITL method.

pof
8th April 2007, 11:06 PM
Please do not open new threads for bricked devices, use this thread:

http://forum.xda-developers.com/showthread.php?t=286755

btw, you have bootloader 1.04, your problem is easy to fix. READ.