Qtek 9100 (HTC Wizard) bricked :((

[Pulsedriver_cz]

I have upgraded my Qtek 9100 with new Windows Mobile 6 WWE. After restarting the device everything worked OK, i just setted up basic things (clocks, owner information etc..) - nothing peremptory. After this I restarted it with soft reset again and it still worked... But then i shortly pressed power button (just to turn off the display) and after 10 minutes i wanted to turn it on again, but nothing happened.. The GSM LED diode still winked, but I couldnt turn the device on. So I used soft reset and again nothing happened, just GSM LED diode stopped winking. - Since this it was totaly bricked. I also tryed hard reset and bootloader mode, but none of this appered. The battery was 100% charged and I tryed to charge it again, but it didnt helped. I also tryed to take out and insert again the battery, but it still was unsuccessful :( What should I do now? :(

[mfrazzz]

If the lights are still blinking then the phone still has life and appears to be operating (in some fashion). If you plug in the USB cable, does the charging light come on? If that does, then it is definetly still running.

I would suggest you taking the battery out and leaving it out for 5mins - 30mins. Then putting it back in and try turning it on. If nothing, try doing a hard reset after that. Also remove your SD card.

Good luck

[Pulsedriver_cz]

Lights arent blinking at all. When I plug in the USB cable or charger, also no lights. I also tryed hard reset after plugging the battery, but again unsuccessful :(

[mfrazzz]

Sorry, but its sure sounding like a bricked phone (although I've never heard of one that bricked sometime later. Usually its right after an upgrade).

Only other possibility is your battery has been completely drained. Can you get another battery to try in the phone? If not, then you can try jump starting the battery.
http://forum.xda-developers.com/show...38&postcount=9

[Pulsedriver_cz]

Yes, I know that is bricked. What should I do to unbrick it? ;)

[jwzg]

Temporary brick at most if it was still running after the update. Try the different combos of battery out and in. This sounds like what a device does when the battery is bombed. If nothing, a new battery is definitely in order before you assign it permanent doorstop status. Good luck.