PDA

View Full Version : very dead exec


towinguk
10th April 2007, 11:26 PM
Having not use my exec for a bout a month I now find it will not start or take a charge (battery has 3.8v ) but it will not power up ,it is still in warranty BUT I have changed the rom ,so don’t know if o2 will repair it
If I use the wall charger a LED flashes on for about 1 second ,if I plug in to usb lead on pc (with battery removed) red led comes on any ideas appreciated

SpyderTracks
11th April 2007, 12:25 AM
Having not use my exec for a bout a month I now find it will not start or take a charge (battery has 3.8v ) but it will not power up ,it is still in warranty BUT I have changed the rom ,so don’t know if o2 will repair it
If I use the wall charger a LED flashes on for about 1 second ,if I plug in to usb lead on pc (with battery removed) red led comes on any ideas appreciated

Problem indeed.... Firstly, I wish I could offer some constructive solutions, but afraid not.... it does sound like a worn battery, and maybe worth trying (or borrowing) another one to flash?

I take it as you refer to it as an 'Exec' that it is the O2 branded one? If it is, from my experience with the O2 technical support, they really don't have a clue. I would assume that they would send an exec straight to HTC for testing. It's a complete last resort, but if you were to tell them that your unit was dead and they were to take it in, they wouldn't be able to solve the problem before they sent it back to HTC. This is of course after you have clarified it's not just a dead battery cell.

Best of luck with the thread and hoping someone a bit more experienced can help.

kecido
11th April 2007, 09:11 PM
So, let me get this straight, your universal does not turn on (and by turn on I mean that you see the familiar wm5 screen with your apps, etc.), no matter what have you done, and the only way to have the charging led on is by connecting it to USB port with the battery removed?

If this is the case, you might have a dead internal battery charging/power supply circuit, i have repaired some old Ipaqs with this failure, most of them failed due to a defective battery, easily recognized by overheating when the unit was placed in charge, usually the overheating increased slowly in time (months usually).

I don't want to be misunderstood, but all these devices have a way of turning of the LCD backlight, a long pressure on the on button does this, it can restores with the same long pressure, see if this is not your case.

If you have some electrical problem with your PDA you might take it to repair or you could try to do it yourself -if you're able to do it obviously-.

Anyway, try to get yourself another battery (you might ask for it to someone else with a uni), put it on and see.
I'm also assuming that you have tried to hard reset your device.

good luck

Grilloman
12th April 2007, 05:23 AM
So, let me get this straight, your universal does not turn on (and by turn on I mean that you see the familiar wm5 screen with your apps, etc.), no matter what have you done, and the only way to have the charging led on is by connecting it to USB port with the battery remo....
good luck

Look maybe this will give you some hope. Yesterday I took my Htc Typhon (smartphone) after a long time, the battery was die. I tried to charge via usb, and nothings happened, then I tried to use a usb charger and nothing happened neither. Finally I charged the battery alone on an universal battery charger and after 30 minutes my phone was alive again.

Hope it will help you!

Felipe

towinguk
12th April 2007, 03:58 PM
So, let me get this straight, your universal does not turn on (and by turn on I mean that you see the familiar wm5 screen with your apps, etc.), no matter what have you done, and the only way to have the charging led on is by connecting it to USB port with the battery removed?

If this is the case, you might have a dead internal battery charging/power supply circuit, i have repaired some old Ipaqs with this failure, most of them failed due to a defective battery, easily recognized by overheating when the unit was placed in charge, usually the overheating increased slowly in time (months usually).

I don't want to be misunderstood, but all these devices have a way of turning of the LCD backlight, a long pressure on the on button does this, it can restores with the same long pressure, see if this is not your case.

If you have some electrical problem with your PDA you might take it to repair or you could try to do it yourself -if you're able to do it obviously-.

Anyway, try to get yourself another battery (you might ask for it to someone else with a uni), put it on and see.
I'm also assuming that you have tried to hard reset your device.

good luck


thanks for all the help

1 it will not turn or power ,no led no screen
2 battery dose get hot when charging
3 screen has not been dimmed

its back at o2 shop now we will see if they repair it and ill report back !!!!!!!!!

towinguk
12th April 2007, 04:12 PM
Look maybe this will give you some hope. Yesterday I took my Htc Typhon (smartphone) after a long time, the battery was die. I tried to charge via usb, and nothings happened, then I tried to use a usb charger and nothing happened neither. Finally I charged the battery alone on an universal battery charger and after 30 minutes my phone was alive again.

Hope it will help you!

Felipe


hi thanks for the reply i have had the same on a m600 ,would not charge from usb or car kit but did start with mains charger
i have tryed hard reset but it will not do that either
battery is stuck at 3.7v even after trying to discharge it with a small bulb

thanks
John...

jdaveusmc
12th April 2007, 09:07 PM
This is something I've had happen in the past.

Try taking the battery out, and put it into a ziplock back, and place it in the freezer for a few hours. I know, I know, it sounds ridiculous. But sometimes, just sometimes, it will reactivate the cells, and you'll be able to charge it after that.

towinguk
7th May 2007, 11:43 PM
well as said before took my phone back to the O2 shop and sent it off to the service centre. The report came back that the main board US .not only did i get a new exec but But a new boxed one and a full set of all original parts !!

shaji007
8th May 2007, 06:15 PM
i had this problem when i first got my SPV m5000..i took it to the orange shop...(the people where nice) they kept it for few testing and said...

battary was faulty...so they gave me a new battery XD