Fantastic Mobiz XBow v1.1i

[ajay13]

Fantastic Mobiz XBow v1.1i is a great rom... but it doesn't run stable on my prophet :( . it must be my prophet cause everybody else's device runs Fantastic Mobiz XBow v1.1i perfectly... so i will have to turn to another rom... :o

great job guys... thanks alot, keep up the great work... :)

[chuawc]

I have upgrade my S200 to this fantastic rom:) , and i have a little problem is:

When i connect my pocket to Internet (with GPRS connection), when i close my browser the connection is still connecting, this make me spend money and battery of my pocket:( .

Can you have any idea?

Thanks and continues with the good work .


Me Too! I've have to softreset, then only it can back to normal.

[kta]

Me Too! I've have to softreset, then only it can back to normal.

When you're done browsing, just hold the Red (hang-up) button for 3 seconds and the GPRS connection will end.

[TugaMojo]

When browsing that´s true, but i have my mail account sync with my pocket with sechudule, where the connection is never stopped if i don´t click in red button after 3 seconds.

Today i have my pocket connecting 3 hours :mad:

[chuawc]

When you're done browsing, just hold the Red (hang-up) button for 3 seconds and the GPRS connection will end.

Yup. I did it. after disconnected by hang-up button for few secs it auto re-connect again... again and again....

[kryptonite]

Great. I used Fantastic Rom 1.00 and during the update process it gives an error on my Phone screen saying Could not execute Calnot.exe .
I just clicked ok and everything went fine and i used 1.00 for a week. Now i upgraded to 1.1 and got the exact same error "Could not execute Calnot.exe "
I just clicked OK and it went away this error comes when CopyFileToTFFS operation is goining on during the Upgrade_rom.bat process. Whats this...why the error...Should i be even concerned?

[flykthewiz]

read through the thread - it's there!!!!!!!!!!!!!!!!!!!!!!!

Hi, I downloaded the two files. Somebody can send to me in private the password.

Thanks

[danny618]

Is anyway to hide the old sms from my sim card?

[ndCChris]

hello
can anybody describe me how to make shortcuts of ms word and excel? i need the shortcuts. in official roms these shortcuts are automatically there in the list but in these rom there aren't any shortcuts of them. just a lot of added stuff.

[iamwin]

Is anyway to hide the old sms from my sim card?

yup! use tweaking programs like SKtool.

[mccune]

Is anyway to hide the old sms from my sim card?


Or use an original register tweak:

Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show

This way you don't have to "buy" any of these programms ;)

[TugaMojo]

Or use an original register tweak:

Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show

This way you don't have to "buy" any of these programms ;)


Thanks great tip.

[danny618]

Or use an original register tweak:

Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show

This way you don't have to "buy" any of these programms ;)


Thanks for good tips, however, it seem only hide my SIM's contact but not SIM's SMS leh?? Am I missed any step!!:confused:

[ndCChris]

how can i disable gps application under connections?

[danny618]

Found another bug while trying to send file via Bluetooth in Resco Explorer..

Error message "Cannot connect to the OBEX device. It's either not accessible or does not support selected service."

Note: No problem to receive file from other via bluetooth

Can anyone help to fix this:confused:

[alsafe23]

In Beem, you must have receive all incoming beams, and the bluetooth is well.

[danny618]

In Beem, you must have receive all incoming beams, and the bluetooth is well.

Ya, I did. No problem on receiving but failed to send via resco explorer.

Additional finding during lunch.
1) Cannot send - Nokia, Sony Ericsson, Notebook
2) Can send - Eten ppc

Any idea :confused:

[tktk]

Ya, I did. No problem on receiving but failed to send via resco explorer.

Additional finding during lunch.
1) Cannot send - Nokia, Sony Ericsson, Notebook
2) Can send - Eten ppc

Any idea :confused:

I am having the same issues with bluetooth.
I can receive files through bluetooth but can't send any file using bluetooth.

[zeusin]

I am having the same issues with bluetooth.
I can receive files through bluetooth but can't send any file using bluetooth.

I havent had problems sending to Nokia or sony.. I did pair up the devices first. Worked like a charm.. receiving and sending

[divxmaniak]

I havent had problems sending to Nokia or sony.. I did pair up the devices first. Worked like a charm.. receiving and sending

To make BT trasnfer work properly I need to pair a device before? It's not possible to select a file, choose to send it via BT and then decide to wich devices?

[acer175]

Ya, I did. No problem on receiving but failed to send via resco explorer.

Additional finding during lunch.
1) Cannot send - Nokia, Sony Ericsson, Notebook
2) Can send - Eten ppc

Any idea :confused:

Are you using OBEX sending through RESCO explorer?

[acer175]

To make BT trasnfer work properly I need to pair a device before? It's not possible to select a file, choose to send it via BT and then decide to wich devices?

No, not necessarily, however OBEX is not compatible with all devices.

[divxmaniak]

No, not necessarily, however OBEX is not compatible with all devices.

I can't use the function on my jamin. I haven't the voice in the resco menù.
So...?

[danny618]

Are you using OBEX sending through RESCO explorer?

Well, I can't answer this answer cos I just try to send file via resco explorer & bluetooth with original new ROM setting. But from my findings it seem most ppc somehow support OBEX except non WM5/6 phone..

Any clues?

On the sidenote, even after I upgrade to XBox v1.1i WM6, I realise that it does come with new radio. So, I still using my old radio 02.19.21. Can anyone suggest which is best radio I shld upgrade? Where I can get it as I can't download from the xda archieve?? Thanks in advanced.

[divxmaniak]

I reinstall resco and everything work fine.

[dj_suca]

this Rom is very F** Damm Cool

Frinds The Bug's are most of than solved with a H Reset :P


Thns for this rom:) :)

[linking]

could anyone send me the extended rom for this rom please, because i failed to install step 1 and thus i dun have the extended rom installed. thx a lot~

linwillie@gmail.com

[UGURSIVRIKAYA]

I want to thank to people who made this ROM. I've used almost every rom in this site and all of them had some bugs. However this rom is really excellent. Fast stable and user friendly. I have empowered the rom with pocket plus and now I think it's much better than my expectations.

1.No bugs
2.Great battery time
3.Very Fast
4.Very stable

Thankkksssssss

[iamwin]

I want to thank to people who made this ROM. I've used almost every rom in this site and all of them had some bugs. However this rom is really excellent. Fast stable and user friendly. I have empowered the rom with pocket plus and now I think it's much better than my expectations.

1.No bugs
2.Great battery time
3.Very Fast
4.Very stable

Thankkksssssss

i agreee with you! best rom for me!

[danny618]

Hi,

Yet another new bug found:

- While my 818 pro connected to my notebook with USB cable, I cannot pick-up calls with either green button or soft-key, it continue ringing & everything just jammed. I hv to soft-reset:confused:

Any ideas?

[UGURSIVRIKAYA]

I don't have such a problem. During sync I can manage my calls as usual. You should have another problem. You may try to flash the rom again to solve this problem.

[TugaMojo]

I have resolved my problem, (GPRS Connection don´t close) with the GB-soft Tweak and a soft reset.

[KmoT]

This rom is great !!!!!

I've installed the fantastic rom on my brand new G4 orange spv m600 and everythings ok
(although step 1 failed at 10%, flashed 2.20 WWE, then step 2, then hard reset, then soft reset at extrom installation)

i've managed to get VOIP working after installing :
_"VOIP.cab" from the hermes forum (http://forum.xda-developers.com/showthread.php?t=299950)
_ "VOIP Settings" application from the other thread (http://forum.xda-developers.com/showthread.php?t=303493)

thanks all for your advices

[eddyve]

Hi guys,
Need some help. I can instaal the standard RUU_Prophet_220734_2207114_024721_QtekWWE_Ship installation from Vista, but I cannot install the fantastic 1.1i feom Vista. I followed the scipt that I found on this site and it works well for the first installation. Any idea?

[NetrunnerAT]

Use the Forums search funktion!

Vista doesnt support Flashing PDAs.

[eddyve]

Hi Netrunner,

I did read the posts on this forum and please read my post better. I can flash my prophet from Vista, but not all roms! I can install the factory shipped 2.47 rom and I can flash the smart1 v2 rom from Vista, however I cannot install the fantastic mobiz 1.1i rom. That was my question! BTW there is a post on this forum on how to flash from Vista!

[jychan28]

I have learnt a lot from this forum and able to download many files for me to play with my Prophet. But to look through all these pages (so far 29) took a lot of my sleeping time. There are some repeated question like asking password, complaining about password, accusing xda-developers being arogant not providing password etc... that took quite a bit of spaces.

I would suggest if any one need to ask something, look through the forum carefully. It took time to go through so many "reply" that keep asking password and so many "reply" that purposely answer the question but not giving it out directly until some one broke down and answer that the password is right there in the #1 Floor.

I also suggest this forum should provide a specific subject area for people that brick their machine. There seems quite a bit of people had that problem.

Bottom line is please help keep the Thread efficient.

Thank a lot guys!

[NetrunnerAT]

Hi Netrunner,

I did read the posts on this forum and please read my post better. I can flash my prophet from Vista, but not all roms! I can install the factory shipped 2.47 rom and I can flash the smart1 v2 rom from Vista, however I cannot install the fantastic mobiz 1.1i rom. That was my question! BTW there is a post on this forum on how to flash from Vista!

The 2nd Part use Nativ Writing the OS Part of the Firmware! You have a OS.nb file. You can make a nbf file with it and then you can use the normal Writer like Smart! To you need help or is this enough info?

[rjtd]

Is it possible to skip the installation of the extra stuff bundled on this rom, by reseting at the extended rom installation phase?
I really prefer a clean rom, but this Fantastic is, given your comments, the best WM6 rom out there.
So it would be great to get Fantastic without all the extra "garbage".

[chuawc]

Is it possible to skip the installation of the extra stuff bundled on this rom, by reseting at the extended rom installation phase?
I really prefer a clean rom, but this Fantastic is, given your comments, the best WM6 rom out there.
So it would be great to get Fantastic without all the extra "garbage".

Yup... You can do so...
I've skipped the ext_rom installtion part by softreset... For my opinion it works better for my prophet. (Since day 1 relaesed till now) :)

[rjtd]

I've just installed Fantastic Xbow 1.1i on my Prophet, over AKU 2.3.
Everything is working fine, and it is also faster than AKU 2.3.
I skipped the Ext Rom installation. Are there any important patches in it?
How can I access extended rom?
Also, where can I get the OldPhone ringtone? In my opinion the new WM6 ringtones are rather lame.

[NetrunnerAT]

You need some Patches from Extended ROM ... in the moment, your device doesnt Charge via usb vs pc!

[rjtd]

I connected the PDA to my PC, and on the battery applet it says "charging".
Do you know how to unlock extended rom in WM6?

PS: I now had confirmed. I connected my phone to my PC, with 95% remaining battery. I now have 99%, so it is charging properly without extrom cabs.

[TugaMojo]

Or use an original register tweak:

Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show

This way you don't have to "buy" any of these programms ;)




This tip is for hide The Sim Contacts, and to hide IM Contacts, do you know what is the key?

Thanks in advance.

[rjtd]

So far so good.
I did not spotted a single bug.
I was running AKU 2.3, and went straight to Step 2. Perfomed an hard reset after the step 2 completion, and a soft reset when extended rom was starting to get installed.
My results are the following:
. Wifi OK
. Bluetooth OK
. Bluetooth GPS OK
. SMS OK
. Voip OK
. Charging on car, charger and PC OK
. Settings kept after a soft reset OK
. Camera and CoolCamera OK

[rasanansa]

How do you activate extended rom?

[rjtd]

How do you activate extended rom?


Just use this cab.

[sanespace]

What is coolcamera?:confused:

[rasanansa]

I am a newbe. Thahns for the file.
From what i understand from various posts, the extended rom contains extra cabs (programs) that are installed after a hard reset and may be stopped from installation by a soft reset just before. These cabs can be deleted by/after unlocking the external rom. By undeleting the cabs, extra space is released.
Question - Is is better to first load the cabs, unlock the external rom, delete the cabs to make extra room or soft reset to void installation, but then the cabs ramain somewhere. Help i am a lot confused.

[videobelu]

So far so good.
I did not spotted a single bug.
I was running AKU 2.3, and went straight to Step 2. Perfomed an hard reset after the step 2 completion, and a soft reset when extended rom was starting to get installed.
My results are the following:
. Wifi OK
. Bluetooth OK
. Bluetooth GPS OK
. SMS OK
. Voip OK
. Charging on car, charger and PC OK
. Settings kept after a soft reset OK
. Camera and CoolCamera OK



...for me with CoolCamera the resolution in photo mode not reach 1600x1200....anyone???

[qdavhen]

Hi, I'm using this rom and it really is fantastic. But I would like to clear the ext rom programs.. Everytime I delete the files, they appear gone, but when I soft reset, they're there again. I've tried resco to change attributes, but it still doesn't work. Any idea how I can delete some of these? I've already done the softreset so many don't install, but want *some* of the others gone to free up ext rom.

Thanks

Dave.

[rjtd]

qdaheaven, can you please tell me what are the cabs on the extended rom?

[tktk]

Thanx for the Fantastic Mobiz XBow v1.1i ROM.
The only WM6 ROM that comes with many usefull tools like :
Registry Editor / Opera Browser / PocketRar / RealPlayer /TCPMP and lots more..

Tip:
To Remove Thai Keyboard(ThaiWinCE) from Input List change the following registry key(using PHM Registry Editor in Tools folder).

Only change the (Default) dword from 1 to 0
From:
HKEY_CLASSES_ROOT\CLSID\{C0B1F8B0-BB81-4424-931D-1E9611B0819B}\IsSIPInputMethod\(Default) = 1 (DWORD decimal)

To:
HKEY_CLASSES_ROOT\CLSID\{C0B1F8B0-BB81-4424-931D-1E9611B0819B}\IsSIPInputMethod\(Default) = 0 (DWORD decimal)

[rjtd]

Bugs I had experienced in this rom
- "Turn on wifi" link from the bubble? *FIXED*

[HKEY_LOCAL_MACHINE\ControlPanel\WrlsMgr]
"Group"=dword:2
"Hide"=dword:1
"Redirect"="CommManager.exe"

- VOIP calls go through the speakerphone, and not the front speaker
- Wireless shuts down on standby (normal), even when a VOIP call is active (this is the problem)

[danny618]

Another bugs i facing is CE-Star in 818 pro..

After I installed CE-Star r3, my ppc start to run unstable or hangs even when I run others applications.

Is anyone facing same problem? What is the solution?
I did remember someone say he install Monster Chinese after facing the same problem. If yes, pls share what version of Monster? Where I can get a copy with keygen? Thanks in advanced.

[Eladio.Linares]

Another bugs i facing is CE-Star in 818 pro..

After I installed CE-Star r3, my ppc start to run unstable or hangs even when I run others applications.

Is anyone facing same problem? What is the solution?
I did remember someone say he install Monster Chinese after facing the same problem. If yes, pls share what version of Monster? Where I can get a copy with keygen? Thanks in advanced.

Please read wikis. It is NOT allowed use this forum to propagate keygens/cracks or other sort of illegal attitudes...

[danny618]

Please read wikis. It is NOT allowed use this forum to propagate keygens/cracks or other sort of illegal attitudes...

So sorry!

Can anyone share experince on CE-Star or Monster running on XBow v1.1i:confused: :confused:

[qdavhen]

Ideally, I would like to clear the ext rom completely to put in programs I choose. Currently there are many things I will not use like VJBrisk, Screen Rotate, Opera, BT Toggle, TCPMP, Real Player etc. Like I said, I can access the Ext Rom, but can't delete anything... it just keeps coming back (even after changing attributes of files).

[sms755]

Thanks all for that great job you don here, but I need some help regarding some problems with my Jamin, after completing the upgrade I install ArabizerSuite2B342.exe and after that I couldn’t read my txt message the Arabic and the English one , if I uninstall the arabizer software I will be able to read the English message only can anyone help me with this issue also I am facing problem with WiFi it doesn’t switch off using spb suite it must be thru communication manager only.

ipl 1.00
spl 2.20.0000

[NetrunnerAT]

Extract the Ext_ROM from Fantastic ROM ... edit it with WinImage ... write it back.

[rjtd]

Extract the Ext_ROM from Fantastic ROM ... edit it with WinImage ... write it back.

How do we extract the extended rom?

[mostafa0007]

I have a strange problem

the folders in sd memory r appare but all the files were in it not appare !
some times some of files appare but it dosent work !

the only solution i found .... is to remove the sd card from ppc then put it again
and the files appare by this way
but ! after a bout 10 min. ...... the problem repeat !

help plz

hint: all wm6's roms do this problem with my sd card .... :(

[rasanansa]

I am a newbe. Thahns for the file.
From what i understand from various posts, the extended rom contains extra cabs (programs) that are installed after a hard reset and may be stopped from installation by a soft reset just before. These cabs can be deleted by/after unlocking the external rom. By undeleting the cabs, extra space is released.
Question - Is is better to first load the cabs, unlock the external rom, delete the cabs to make extra room or soft reset to void installation, but then the cabs ramain somewhere. Help i am a lot confused.

I have been through lots of posts but havent found a simple answer to the extended rom problem.
1) Why do you have to and how do you extract the extended rom?
2) I have downloaded "unlock_ext_rom_wizard_105.cab". What does it actually do the phone?
3) Where do we have to edit and cancel files?
Will someone help by explaining with simple english or is there a particular post to read?

[qdavhen]

How do we extract the extended rom?
A good question. How do I extract Ext_Rom to edit/remove it?

Thanks.

[rasanansa]

If you look at the post made yesterday at 7:36pm you will find an attachment file to unlock the extended rom. Why and how to do so i don't know and i hope someone explains why.
Thanks

[fadimck]

How do we extract the extended rom?




can anyone do this action for us ???

please experts make a clean copy without programs, and upload it to us

THANKSSSSS

now i've returned back to the ORIGINAL ROM as this version always hans with me and the ORIGINAL never do this (using it for one week now NEVER HANG)


PLEASE HELP EXPERTS

[qdavhen]

Yes, it would be very useful, and appreciated if somebody more knowledgeable at flashing roms than I could provide either a clean copy, a .cab or even clear instruction that would enable erasing of just ext_rom when a simple delete doesn't work.

Thanks.

[flykthewiz]

Why do you want to erase it???

Yes, it would be very useful, and appreciated if somebody more knowledgeable at flashing roms than I could provide either a clean copy, a .cab or even clear instruction that would enable erasing of just ext_rom when a simple delete doesn't work.

Thanks.

[qdavhen]

Most of the programs that are stored in it I won't use and I'd like the space to store programs that I will use.

[flykthewiz]

ok

I don't believe that on WM6 you can read and write properly to extended rom.

If what you want to do is put some cabs in there to install at hard reset then that can be done, but you may as well just install them afterwards anyway.

If you don't want the programs that are installed just reset with the stylus when it says "3 seconds"

If you want some of them - you can install afterwards by typeing \Extended_Rom into total commander and running the cabs you want manually.

bear in mind that most of the 1.1 "extras" don't take up much room in memory as only links to the programs in ext rom are created.



Most of the programs that are stored in it I won't use and I'd like the space to store programs that I will use.

[zyberlee]

just press RESET (Soft Reset) when the Customize program runs at Today Page. When you finish Welcome, Alignment, Password Screen , Just SOFT RESET IT.

you will get Clean ROM , that 's it.

[chuawc]

It works! Thanks alot! :D

[qdavhen]

Thanks, but I've already tried that. Then unlocked ext rom and there is still programs in there (TCPMP and real player and a host of small apps) that I don't want..... and unfortunately they do take up most of the rom..... Is there a way that I can reflash it or something??

[tktk]

just press RESET (Soft Reset) when the Customize program runs at Today Page. When you finish Welcome, Alignment, Password Screen , Just SOFT RESET IT.

you will get Clean ROM , that 's it.
Thanks a lot for the CLEAN ROM tip :)

[qdavhen]

This only works for not installing to rom, but I want a clean EXT_ROM.....

[rjtd]

To have a clean ext-rom, I guess that you have to cook your own rom.

[qdavhen]

Thanks, I suspected as much. Unfortunately, I'm a bad cook and am much safer with take out!

[flykthewiz]

You can do this.

downgrade to aku 2.2

find a rom update that installs extended rom via copy rather than ruu

edit the update.bat file and remove everything after the delete rom statements

execute update.bat - this will clear the rom

install part two only of mobiz 1.1 (it is in part one where the ext rom gets written)

not sure what this will give you because i don't believe you can read and write to ext rom in wm6 like you could in wm5


Thanks, I suspected as much. Unfortunately, I'm a bad cook and am much safer with take out!

[NetrunnerAT]

Install Fantastic X Bow without Ext_ROM ... dont do this! A lot of programms are Hardlinked in the Ext_Rom! Note ... alle Programms are Install direkt in Ext ROM and they doesnt use Space in the Programm area!!

[flykthewiz]

No they aren't. They are only linked if you allow the ext rom install to go ahead. And this guy doesnt want them. Opera installs to main memory.

I don't install ext rom either.

I have already said that there is no point in deleting them because you can't use the space anyway, but it doesnt matter if they are deleted as long as you haven't first let the ext rom install.

Install Fantastic X Bow without Ext_ROM ... dont do this! A lot of programms are Hardlinked in the Ext_Rom! Note ... alle Programms are Install direkt in Ext ROM and they doesnt use Space in the Programm area!!

[mhpcande]

install... jeje

[pplitro]

please send me pass
pepe_rubial@hotmail.com
thx

[Grolloo]

please send me pass
pepe_rubial@hotmail.com
thx

Well my friend, if you read the first post again, you'll know the password..........
Comeon guy, READ!!!!!!!!!!!

[Kina500]

Hi

Fantastic work, it works perfect on my Prophet.

I have disabled the Thai keyboard, but how do I enable the Intellipad T9 (phonepad) keyboard?

How do i add language DLL files, and change the regestri to use this language?

I wont to add the Danish files, and enable the IntelliPad.

Thank you all for your fantastic work.

[NetrunnerAT]

I work with some Guys on MUIs to change language ... need time -> very complicate!

[Kina500]

I work with some Guys on MUIs to change language ... need time -> very complicate!

If I can assist in translating something to Danish, for a Danish variant of the files, then write me please.

Best regards

[lepeux]

If I can assist in translating something to Danish, for a Danish variant of the files, then write me please.

Best regards

For translating have you a tutorial ?

[triplejay]

in response to kina500 I personally got my phonepad working using one of the ones in this thread http://forum.xda-developers.com/showthread.php?t=284378&page=9&highlight=phonepad+sip+download


There are instructions to install language there but you need to find the danish dll to install from somewhere. I've seen other people looking for t9DanishLdb.dll, but I haven;t seen anyone produce it yet...

[eddyve]

I am using 1.1i now for almost 1 week (I installed a clean version, I skipped extended memory) and it runs fine now: BT, WIFI, IR OK. One problem, I had the impression that 1.1i is using a lot of power and this morning I had the confirmation of this. Last night I switched my Prophet off with 98% power (11 PM), this morning 7.30 my device was at 0%, empty!
I installed the battery fix too, is this the problem?

[Reichi]

I can confirm this.
I have used 1.1i from the very first day the password was public and i had Energy Draining Problem for several times now.
I can't exactly say when it happens (as it is not there all the time) but i happened to me quite some times so switched back to latest official rom (aku 2.2 ger) which is doing way better when it comes to power draining.

[TugaMojo]

I am using 1.1i now for almost 1 week (I installed a clean version, I skipped extended memory) and it runs fine now: BT, WIFI, IR OK. One problem, I had the impression that 1.1i is using a lot of power and this morning I had the confirmation of this. Last night I switched my Prophet off with 98% power (11 PM), this morning 7.30 my device was at 0%, empty!
I installed the battery fix too, is this the problem?


Do you know if your operator network in this night don´t have problems?

[Kina500]

For translating have you a tutorial ?

No, I don't have a tutorial.
Does a tutorial exist?

[jbau33r]

Hi everyboby,

This is a great rom, really.

But wifi isn´t work very well. I mean, I can connect to the wireless router, but I can´t access internet using opera or ie.

My configuratios is very fine, because it was working on Asserg´s rom.

Any help, pls.

Thank all.

Ps. sorry my english

[iamwin]

I am using 1.1i now for almost 1 week (I installed a clean version, I skipped extended memory) and it runs fine now: BT, WIFI, IR OK. One problem, I had the impression that 1.1i is using a lot of power and this morning I had the confirmation of this. Last night I switched my Prophet off with 98% power (11 PM), this morning 7.30 my device was at 0%, empty!
I installed the battery fix too, is this the problem?

i didnt have any pwoer drain problem... seems weird. try to reflash it again..

[rjtd]

Actually, I never had so much battery time with older roms.
Fantastic is really an amazing rom :)

[eddyve]

I wish I could say that too that this is rom gives the best battery time. It happened again this night. 0% available, completely drained in the morning!

Are you using battery-fix?

I hope to find a solution, because this ROM is good.

[TugaMojo]

I wish I could say that too that this is rom gives the best battery time. It happened again this night. 0% available, completely drained in the morning!

Are you using battery-fix?

I hope to find a solution, because this ROM is good.

Do

It´s strange only happend in the night, do you shut off your mobile? Your operator don´t have problems? Do you have signal on your mobile phone?

[flykthewiz]

do you have the phone set to automatically switch off in power settings? If anything causes it to come on in the night, (text, call, alarm, etc) and it doesnt switch off then the screen will drain your battery.

Battery fix is nothing to do with the amount of power it uses. it is to do with the fact that sometimes charging is a problem.

I wish I could say that too that this is rom gives the best battery time. It happened again this night. 0% available, completely drained in the morning!

Are you using battery-fix?

I hope to find a solution, because this ROM is good.

[macp]

Hello guys,

I ve just discovered this forum yesterday and i decided to flash my SVP M600 with Fantastic Mobiz XBow v1.1i 1hour later :D

The image is almost perfect exept few points

- I have this message error notifying me a lot :
"Notification Error" - "Cannot execute \Windows\TimeWizard.exe"

I guess i could find this exe somewhere ?

- I can't access to "Contacts" from win->contact, neither from the phone pad which does not provide contact button like under wm5 (very bothering bug :()


Finally i have a question, i ve read topics on the forum but i did'nt find anything about WM6 MUIs? is there a way to download a MUI for free somewhere ? (i would like to get a frech keyboard layout at least)

Thanks

[deezer]

Hello guys,

I ve just discovered this forum yesterday and i decided to flash my SVP M600 with Fantastic Mobiz XBow v1.1i 1hour later :D

The image is almost perfect exept few points

- I have this message error notifying me a lot :
"Notification Error" - "Cannot execute \Windows\TimeWizard.exe"

I guess i could find this exe somewhere ?

- I can't access to "Contacts" from win->contact, neither from the phone pad which does not provide contact button like under wm5 (very bothering bug :()


Finally i have a question, i ve read topics on the forum but i did'nt find anything about WM6 MUIs? is there a way to download a MUI for free somewhere ? (i would like to get a frech keyboard layout at least)

Thanks
1. Do hard reset
2. On phone pad click left soft key (Hide Keypad) then scroll down to your contact list (under your call history)

sorry for my english

[macp]

1/ Thank you, hardreset solved my contact problem. Actually i discovered that wm5 and wm6 does not use same vol.pim format for contact database so before hardreset i was using a wm5 format vol.pim on a wm6 !!!

2/ Thank you again it s a big shame, i did not see it thanks to this ergonomic rollout:)

I m still investigating a trick for changing virtual keyboard..

[codex666]

Hi all,

Thanks for this great rom, one problem i have is that my activesync password and bluetooth pairing are lost each time i softreset. I searched this forum but couldnt find anything about it. Did anybody have this as well?

btw, i did a clean install (no rom) becouse the first step of the installation didnt finish. it crashes on vista. so i updated to this rom from the WM5 nvid rom.

if anybody could point me in the right direction, i'd apreciate it.

[smarvest]

I've install 1.1i. Since then the WIFI cannot be activated.

Any idea on how to overcome that problem?

__________________
IPL: 1.00
SPL: 2.15.0000
Radio: 2.69.21
OS: Fantastic V1.1i

[elFahd]

I've install 1.1i. Since then the WIFI cannot be activated.

Any idea on how to overcome that problem?



i've installed that rom at least 20 times (which includes my phone, my dad's my friends..)

and in some installations i had this problem, in other installations i didnt.

so i re-installed the ROM and everything is working fine now.

wifi occasionally doesnt turn on while clicking it in the comm manager, but that's not a serious problem.

[awechris]

...for me with CoolCamera the resolution in photo mode not reach 1600x1200....anyone???

Indeed, the resolution will not go up to 1600x1200 anymore on my JAMin with WM6 (was OK in WM5)

[videobelu]

Indeed, the resolution will not go up to 1600x1200 anymore on my JAMin with WM6 (was OK in WM5)

exactly....i have try different wm6 rom but the same limitation.....i think that cool camera is "thinking" of working on a Wizard instead of in a Prophet

[hksin]

exactly....i have try different wm6 rom but the same limitation.....i think that cool camera is "thinking" of working on a Wizard instead of in a Prophet

Same situation I have since using Aku3.x and all wm6. I managed to change the modelID from WIZA200 to PM300, but coolcamera is still assuming that it's a wizard. I think it either retrieve platform ID from deviceID or used a wizard driver to recognise the device.

[liverman666]

I've install 1.1i. Since then the WIFI cannot be activated.

Any idea on how to overcome that problem?

My Wifi will NEVER turn on,no matter how many times I try.Real shame as it`s the ONLY bug I have with this awesome rom!! Tries reflashing and restoring several times,but to no avail.Any fix available??

__________________
IPL: 1.00
SPL: 2.15.0000
Radio: 2.69.21
OS: Fantastic V1.1i[/QUOTE]

[Agentov]

I really can't understand why they stuff the extended ROM with all that software.

I mean, it's just so much and so unuseful that it makes you wonder!

My problem is even if i don't install all that crap (softreset after Hardreset) it still sits there on the extended ROM.

I do delete those files, but because some reason i don't know, they just keep appearing after a hardreset.

Can someone tell me how to delete those files so they don't occupy much needed space on my S200?

[Fady]

N can someone tell me how to change my Device ID to JAmin not WIZA200

[NetrunnerAT]

I really can't understand why they stuff the extended ROM with all that software.

It save RAM :-> this is why the pack all programm in the Extanded ROM.

[flykthewiz]

They DON'T occupy space that you can use so forget about them!

If you want I will post an empty extended ROM! But it won't give you anything because you can't use the space in WM6 anyway!!!!!!!




I really can't understand why they stuff the extended ROM with all that software.

I mean, it's just so much and so unuseful that it makes you wonder!

My problem is even if i don't install all that crap (softreset after Hardreset) it still sits there on the extended ROM.

I do delete those files, but because some reason i don't know, they just keep appearing after a hardreset.

Can someone tell me how to delete those files so they don't occupy much needed space on my S200?

[NetrunnerAT]

ahm ... this isnt true ... you can use all files in the extanded rom and use as file store!

if you cant use them ... you havent config the True FFS Driver right! The Extanded Rom stay in a Disk On Chip. It means ... its a extra flash store. The driver have settings in the Registry to switch, Read Only ... different Powerstats ... deeper Sleep ... what else :-> next ... read thsi thread ...

http://forum.xda-developers.com/showthread.php?t=297085&highlight=true+FFS+pdf

if you search long enough you can found a spec from TFFS Driver Producer with a discription about G3 and G4 DOC and all driver settings and possible Problem, if you use deep sleep.

[flykthewiz]

Ok, then doing what you say everybody should be able to simply delete all of their extended rom files themselves - problem solved :)

I have never managed to get ext rom working as storage since going to wm6 (had no problem in wm5). I will have a look at the thread you give.

ahm ... this isnt true ... you can use all files in the extanded rom and use as file store!

if you cant use them ... you havent config the True FFS Driver right! The Extanded Rom stay in a Disk On Chip. It means ... its a extra flash store. The driver have settings in the Registry to switch, Read Only ... different Powerstats ... deeper Sleep ... what else :-> next ... read thsi thread ...

http://forum.xda-developers.com/showthread.php?t=297085&highlight=true+FFS+pdf

if you search long enough you can found a spec from TFFS Driver Producer with a discription about G3 and G4 DOC and all driver settings and possible Problem, if you use deep sleep.

[NetrunnerAT]

next ... Windows Mobile 5 and Windows Mobile 6 are based on Windows CE 5.0!

If any thing working on WM5 ... its possible to activate or bring to run on WM6 ;-)

[rjtd]

I'm having problems now with this rom :(
My email account does not appear on the "messaging" client. But if I add it again, it says that the account already exists :(
Also, if I receive/delete a SMS and do a soft-reset, the changes will not be commited.
What can I do to solve this?

[TugaMojo]

I'm having problems now with this rom :(
My email account does not appear on the "messaging" client. But if I add it again, it says that the account already exists :(
Also, if I receive/delete a SMS and do a soft-reset, the changes will not be commited.
What can I do to solve this?

Do you have read the entire post?

You can resolved that in post 205.

[_andre_]

A lot of people know that solutions are in this forum. But information are ill-assorted. Reading more 50p can be very painful :confused: especially when your apparatus do not work :rolleyes:
It would very grateful if the whole list of known issues and solution can be in the same post or page for each release...:D

Anyway, this release seems to not be, as the others, the most stable.:cool:
Patience...

[rjtd]

Do you have read the entire post?

You can resolved that in post 205.


I have read almost all posts of this topic, but I guess that I missed that post.
Thanks.

[eddyve]

I tested 2.2a and the new smart1 v1.3, but I reverted back to mobiz 1.1i. This rom is much more stable and everythings works fine on my S200/Prophet. With all respect to all these great guys who working for new roms, but this v 1.3 seems almost the same as v 1.2 apart from a few (new) apps, but a number of things are not working like in v 1.2 and anyway it is made with the same built version as before. Maybe we better wait until this new built will be available.
Thx anayway to all the great guys.

[NetrunnerAT]

Fantastic Mobiz 2.0AC = Alpha Ware! Its a First Preview!

[dr_gribb]

:D :D :D Things are working good so far.
I haven’t found any mayor bugs so far. My Prophet has been running the Xbow 1.1 for 24h and I managed to test most of the basics. There was a small problem with the WiFi not wanting to come on... I did a soft-reset once and that did help, but the same bug showed up later. I found out that if I turned the unit off (suspend), wait 2-3 min and turn it back on the WiFi came on.

Thanx for a SUPERB job. Now i realy can wait a while longer for a better PDA phone, with VGA, nice CPU and lot of memory. :D

Summing up:
. Wifi ok
. Bluetooth OK
. Bluetooth GPS with TomTom 6 OK!!!
. SMS (no missing SMS's) OK
. Charging on car, charger and PC OK
. Settings kept after a soft reset OK
. Camera and CoolCamera ok (ONLY 1280x1024 on a registerd copy)
. Battery life is yet to be experienced, but its looks promising. The battery level didn’t slope much thought the night, and I still had 95% left after 10h sleep

[eddyve]

Hi, coolcamera works fine that's true, but can you use 2m pixel quality (1600x1200)?

[videobelu]

Hi, coolcamera works fine that's true, but can you use 2m pixel quality (1600x1200)?

no max 1024x768

[dr_gribb]

no max 1024x768

Mine goes up to 1280x1024 on a registerd copy of coolcamera

[Kelvino9]

Could somebody please upload the "You got mail!" and "You got message!" soundfile from this ROM for me?

Thank you very much in advance!

[tktk]

Could somebody please upload the "You got mail!" and "You got message!" soundfile from this ROM for me?

Thank you very much in advance!

Here are the sound files attached , better late than never

[crasah]

hi all, im usind smart v1.3 right now (and im having too many problems :( ) i want to load this rom, but do i have to downgrade to a wm5 before loading this ? if yes, how can i do it, does it enough to load the step1 as downgrade, then step2 as wm6? or can i just load step2 directly ? do i have to do something else ?

thanks all...

[TugaMojo]

hi all, im usind smart v1.3 right now (and im having too many problems :( ) i want to load this rom, but do i have to downgrade to a wm5 before loading this ? if yes, how can i do it, does it enough to load the step1 as downgrade, then step2 as wm6? or can i just load step2 directly ? do i have to do something else ?

thanks all...

It´s better downgrade to a wm5, yes the step1 as downgrade and step2 as wm6, run the two steps.

[crasah]

thanks a lot for the answer...

[Kelvino9]

Here are the sound files attached , better late than neverMany, many thanks tktk. Really appreciate your help.

[luisarriaga]

can anyone help?
Device id-Model no. dissapear...
with this i cannot enter live messenger...how can i change back to WIZA200?
tanks

[awechris]

On my G4 Prophet I have constant CPU usage around 20% even when the device is idle. I upgraded a G3 device for a friend and the CPU usage is 1~3% when idle. CPU usage measured with BatteryStatus on both.

Has anybody a G4 running at 1~3% with mobiz 1.1i ?

Any possible solutions ?

[NetrunnerAT]

what IPL/SPL have the G4?

Install a AKU2.2 Rom and then Mobiz 1.1i again. Dont forget every time hard reset.

[awechris]

I found the solution, had nothing to do with the update process. i did it twice before posting and definately with hard reset in between and the problem was still there. However, it involved altering 2 registry values and the CPU usage dropped to around 5% when idle.

what IPL/SPL have the G4?

Install a AKU2.2 Rom and then Mobiz 1.1i again. Dont forget every time hard reset.

[rasanansa]

I found the solution, had nothing to do with the update process. i did it twice before posting and definately with hard reset in between and the problem was still there. However, it involved altering 2 registry values and the CPU usage dropped to around 5% when idle.

I have the same problrm. What are the 2 registry values that need changing?
Thanks

[dkena]

Please new link ROM.

[rasanansa]

I found the solution, had nothing to do with the update process. i did it twice before posting and definately with hard reset in between and the problem was still there. However, it involved altering 2 registry values and the CPU usage dropped to around 5% when idle.

Could you please enlighten us on these 2 registry values on CPU usage? i want mine to drop to around 5% when idle.

Thanks

[eddyve]

I am interested in the registry tweaks too! Please send us the information.

[rasanansa]

I found the solution, had nothing to do with the update process. i did it twice before posting and definately with hard reset in between and the problem was still there. However, it involved altering 2 registry values and the CPU usage dropped to around 5% when idle.

Awechris,
Can you illuminate un on these 2 registry tweaks?
Thanks

[awechris]

Do both changes and reboot the device. If MountHidden does not exist, create it. Typical CPU usage on mine when 195Mhz is 1~2% and around 5% when underclocked to ~120MHz (with CPU scaler).

[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ TRUEFFS_DOC1] "MountHidden"=dword:00000000


Awechris,
Can you illuminate un on these 2 registry tweaks?
Thanks

[rasanansa]

Thanks a lot

[eddyve]

Hi chris
I tried these tweaks, but besides it makes the extended rom visible, I don't see any change in cpu speed. It is still around 37 to 40%.