Default Notifications List

[GavinN]

Hi all,

I had the alarm issue when it would not switch off so I deleted all notifications in the notifications list. I've since learned this was a bad thing to do! My only real problem at the moment is being unable to connect to ActiveSync. I get assigned the correct IP address and activesync goes green but it doesn't connect and I get an error message. I've check all settings/fixes listed in about 4 seperate threads but none have helped.

If someone has Buzz's TaskManger v2.7 installed can you list which notifications you have listed, especially any which look AticveSync related?

TaskManager is available here: http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,27,15027

Edit: Connecting to ActiveSync via Bluetooth is fine. It's only the USB connection which appears broke.

Thanks!

Gavin.

[marisa4755]

This may help you:

http://www.ppcsg.com/lofiversion/index.php/t53614.html

Hope so

[mikechannon]

This may help you:

http://www.ppcsg.com/lofiversion/index.php/t53614.html

Hope so

marisa4755 that is a particularly useful link you give to cure the lost Active Sync connection. So good in fact I think it should be re-written (perhaps tailored) and credited to Aficionado + fattyfattybombom, might put my mind to this for the wiki.

It also serves as a reminder that although scarybear is free it does allow you to easily delete key entries in notifications. The other tools memmaid and SKtools etc at least make it more troublesome though still possible to delete replog.exe.

Mike

[marisa4755]

I agree with you. I found it by accident when wondering what a lot of the 'stuff' in my notifications queue was, with a view to - should it be there. So I googled this one and that link came up.

When we look into the queue, some things are easily identifiable, others are guessable, and some are a bit of a mystery. It's sometimes a bit trial and error deciding what stays and what goes. Anyone producing a guide to this would have to be at least up for sainthood in my book.

[mikechannon]

I agree with you. I found it by accident when wondering what a lot of the 'stuff' in my notifications queue was, with a view to - should it be there. So I googled this one and that link came up.

When we look into the queue, some things are easily identifiable, others are guessable, and some are a bit of a mystery. It's sometimes a bit trial and error deciding what stays and what goes. Anyone producing a guide to this would have to be at least up for sainthood in my book.

Yes indeed, in fact I'll put some work into that, although I recently cleared a lot of mine out so getting a full list of items that show up may be a problem.

Meantime I have adapted the info in the link you gave and posted as a thread - not on wiki yet:

http://forum.xda-developers.com/showthread.php?t=302459

Mike

[marisa4755]

That's really good, makes it very clear. I'm sure this happens to lots of people and the only thing they know will fix it is a hard reset.

If it helps, these seem to be the non clock/calendar or application specific notifications in my queue (original ROM):

Windows\calupd.exe
AppRunAtTime

repllog.exe
/sched /remote /h

repllog.exe
AppRunAfterRndisFnDetected

repllog.exe
AppRunAfterTimeChange

repllog.exe
AppRunAtRs232Detect

clocknot.exe
AppRunAtTime

clocknot.exe
AppRunAfterTimeChange

clocknot.exe
AppRunAfterRestore

CALNOT.EXE
\Windows\TimeWizard.exe
AppRunAtTime

\\.\Notifications\NamedEvents\TimeWizardTimeChange
\\.\Notifications\NamedEvents\TimeWizardWakeUp

CALNOT.EXE
AppRunatTime

CALNOT.EXE
AppRunAfterRestore

CALNOT.EXE
AppRunAfterTimeChange

I haven't yet done my 'fake server' trick so some of the repllogs may change after that.

Hope this helps

[mikechannon]

@Marisa
Thanks for the info. Like you said some are guessable others will take some investigation - see you in a few weeks!!!

Mike

[GavinN]

Hi all,

Thanks very much for taking time to give all the info, including creating a new thread to help others. Unfortunately nothing has helped here. I've created all the notifications using either TaskManger or MemMaid, resetting the device each time but I'm still getting the same behaviour. Even when I manually run repllog.exe.

The only thing I can think of which I have not tried is that the repllog.exe entries for AppRunAfterRndisFnDetected and AppRunAtRs232Detect have aguments also but this isn't mentioned in any post here so I guess I'm clutching at straws.

I'll see what I can do before Monday then I think it's a hard reset.

Gavin.

[marisa4755]

You mention in your first post that you get an error message, what is that message. Sorry, should have asked this first instead of making assumptions. That might give an extra clue.

[GavinN]

Hi Marisa,

Good point.

On the mobile I get "Unable to obtain a server assigned IP address. Try again later or enter and IP address in Network settings" although if I goto Settings > Connections > Network Cards and check I've been assigned 169.254.2.1 and I've tried assigning a fixed address in Remote-NDIS Host but it still doesn't work. Activesync spends ages at 'connecting'. I did get an error message on my laptop (testing now with my desktop) from activesync along the lines of "can not connect to mobile device. click OK to troubleshoot or cancel to end".

Gavin.

[mikechannon]

Hi Marisa,

Good point.

On the mobile I get "Unable to obtain a server assigned IP address. Try again later or enter and IP address in Network settings" although if I goto Settings > Connections > Network Cards and check I've been assigned 169.254.2.1 and I've tried assigning a fixed address in Remote-NDIS Host but it still doesn't work. Activesync spends ages at 'connecting'. I did get an error message on my laptop (testing now with my desktop) from activesync along the lines of "can not connect to mobile device. click OK to troubleshoot or cancel to end".

Gavin.

Have heard of folks with this kind of problem who got it working by uninstalling ActiveSync and re-installing latest version of thee net. You see in your case it looks like repllog is opening active sync so it's not the repllog being missing problem. One other thought is to go to the active sync setting that says delete mobile device and then reconnect the mobile and see if setting up a new connection works. (Only thoughts of things to try before a hard reset!!)

Mike

[johnburn]

Hi Marisa,

Good point.

On the mobile I get "Unable to obtain a server assigned IP address. Try again later or enter and IP address in Network settings" although if I goto Settings > Connections > Network Cards and check I've been assigned 169.254.2.1 and I've tried assigning a fixed address in Remote-NDIS Host but it still doesn't work. Activesync spends ages at 'connecting'. I did get an error message on my laptop (testing now with my desktop) from activesync along the lines of "can not connect to mobile device. click OK to troubleshoot or cancel to end".

Gavin.

Gavin,

Try this. I copied it from a posting on this site a long time ago and put it into an Outlook Note, so I can't acknowledge the original poster (my apologies to whomever you are).

(Title bar) Pocket PC Networking
(Exclamation point yield sign warning icon)
(Error body) Unable to obtain a server-assigned IP address. Try again later or enter an IP address in Network settings.

Solution:

1. Remove the PPC from the cradle.
2. Edit the PPC registry. I used PHM Registry Editor Version 0.7.
3. Look for the registry key:
HKEY_LOCAL_MACHINE\Comm\RNDISFN1\Parms\TcpIp
Change
EnableDHCP=1
to
EnableDHCP=0
4. Quit the registry editor using Tools > Exit. I did not soft reset the PPC.
5. After making the above registry change, dock the PPC. I waited more than 30 minutes and still no error. Before the registry change, the error appeared between 1 to 3 minutes after docking the PPC.

John

[GavinN]

Hello.

Thanks again for all your help but I still don't havet working yet :(

I'm sure the info here will help others though.

Gavin

[marisa4755]

I suppose you have tried unticking the advanced functionality box?

Start/settings/Connections/USB to PC

[GavinN]

Update:
I forgot about my HTC Universal. I loaded TaskManager onto the Universal and copied the repllog.exe notifications one by one and it now works...

These are as follows:

Notification > Task > Arguments > Type > Event
Application repllog.exe /sched /remote /h CNT_TIME None - (date and time)
Application repllog.exe AppRunAfterRndisFnDetected CNT_EVENT RNDISFN interface instantiated.
Application repllog.exe AppRunAfterTimeChange CNT_EVENT The system time has changed.
Application repllog.exe AppRunAtRs232Detect CNT_EVENT An RS232 connection is made.

Gavin