Artemis doesnt`t start

[dr.moppi]

please help! I have made a wrong ROM Update for my Artemis. The result is that it doeasn`t starts anymore. I see only the start screen no more. If i make a SW or HW reset tahn i see a 3 colored screen and USB. But i don`t get a connection via usb to my compute`! How can i wake up my Artemis ???

[bdangol]

tell use more what did you do and how did you do it?

what artemis is it?

what rom was it

[Pyth]

Flash went sour..

You need the original ROM which was on your device when you bought it. What version (HTC, MDA, etc..) and what language was the original ROM?

[empathyvirus]

I guess I made the same or a similar mistake that dr.moppi did. My machine is a Dopod P800 from mainland china with the chinese operating system. I flahsed it with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap. Don't really remember what the original ROM was but now when i turn it on it freezes when it lights up. On the screen, it says

IPL 1.27.0001
SPL 1.27.0000
GSM 02.67.90

OS 1.28.0.0

DOPOD

I don't get a connection through usb to the computer either. I am not sure if I did the hard reset correctly. Didn't understand the instruction on that "press the soft key left and right and soft reset at the same time." Anyway, you guys are all experts, can you help me please?

[dr.moppi]

if i remeber than i used the same ROM Update :-(

I hope anyone could give us a solution, please.

[Pyth]

@dr. moppi we can only help you if we know what version you had before.

@empathyvirus you have to look for the original ROM which, in your case, should be the Chinese Dopod ROM. Install that one and your good to go.

Without the original ROM the only thing left to do is: sending your device to your provider or contact and sent it to the guys of imei-check (http://www.imei-check.co.uk/). Either way, you'll probably have to pay to get it fixed.

[empathyvirus]

Thanks for your quick reply Pyth. In the case I get the original ROM from somewhere, how do I install it if I can't get a connection between the phone and my computer? Can you advice?

[Pyth]

Put your device in bootloader by pressing the record button and reset at the same time. If you have your USB-cable connected between your PC and your phone it will indicate a connection by 'USB' in the left corner of your device. Now you should be able to run the ROM executable and update your device.

[empathyvirus]

i tried but it didn't seem to work. anyway, i have troubled you enough and maybe it's best i just go to the repair centre of dopod and pay for a fix. :) i really appreciate your help though Pyth.

[zMastaa]

Where can i find the t-mobile rom its the MDA Compact III that wont start for me