flashing from SD Card ?????

[rowin666]

hi

it is possible to write ROM from SD Card ?? :confused:

[vlodeck]

Yes it is, if you have the backup rom on SD card. Enter bootloader with sd card inside the device and it will ask you whether or not to flash the rom.

[rowin666]

i don't have backup on SD Card

[nocturne.op.15]

why do you need to use SD flashing? this was primary designed for emergency purposes, it makes physical rewritement of all parts of ROM (could be compared with complete format of your pc, not just quick format)a and new initialization

of course, you must have SD card to take backup from - this is easy to create with various tty clients, the most used for it is mtty (putty and others could be also used)

[Raptorgda]

I need to flash my harmer from sd can you write how do it??
I dont have backup on sd can make for me thiece backup and send me on mail or something like thiece ?? My harmer stop on splash screen i was flashing on cid locked maschine :|

[Raptorgda]

- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.

2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)

3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.

4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).

5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.

6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.

7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.

Thanks to all and hope this helps more people with this problem""

In Wizard forum Ozzy give me thiece solution

[amex4152]

Hi,

Im really new to all this, and... in a few words, I screw the registry of my Wizard T-Mobile, and now it doesn't boot, I can enter to the rgb mode, and, I understand that flashing from SD can help me, but, the steps described above are for restore a backup or make a backup ? Im so confused :confused:

Thanks in advance.

UPDATED: It worked great! but... just one thing, The SD is not reconigzed by my phone, is any way to format it from the Multi-Port/USB TTY ?

Regards.

[Nokia 3650]

6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.

7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.


I did all that you said (backed up to SD card, then restored to SD card successfully), but the problem still remains (obviously).

Is there anywhere I can simply download a 'clean' image file specially formatted for SD cards?