Check It Out The Xda Flame!

[thierryb]

i thinks to be flash for flame need this file on pic
http://rapidshare.com/files/67205938/life_flash.jpg.html

You told us that you know how to make the Flame to be in bootloader mode. Some of us have tried what you proposed (maintain two soft keys and do a reset), but no one succeeded yet.

Can you make some photos of the different steps and of the result and post here.

I think we already have files for flashing the Flame. We have already two files: eboot.nb0 and diskimage.nb0

We have already verified that these files have been used to flash our flame.

We have already verified that we can use the different kitchens available here to cook the diskimage.nb0 file.

It miss us the step you have: be in bootloader mode. If. you know, tell us!

Perhaps after we will discover that other files are missing, but we will progress step after step.

The most important step now is:
BE IN BOOTLOADER MODE

Thanks

[saman2184]

You told us that you know how to make the Flame to be in bootloader mode. Some of us have tried what you proposed (maintain two soft keys and do a reset), but no one succeeded yet.

Can you make some photos of the different steps and of the result and post here.

I think we already have files for flashing the Flame. We have already two files: eboot.nb0 and diskimage.nb0

We have already verified that these files have been used to flash our flame.

We have already verified that we can use the different kitchens available here to cook the diskimage.nb0 file.

It miss us the step you have: be in bootloader mode. If. you know, tell us!

Perhaps after we will discover that other files are missing, but we will progress step after step.

The most important step now is:
BE IN BOOTLOADER MODE

Thanks


ok. pls thid method for tobe bootloader

press and keep two line keys on flame (keypad)+ reset
but press and keep 2 line key ( -,-) before and after reset
see screen bootloader but my flame afetr bootloader not stop screen for get photo.

pls pls set bootloader but this for upgrade on sd .

i need falsh tools for upgrad from pc

[A_2]

ok i get bootloader but for 0ne seconds on screen
:)

[HDJ80]

I found an interesting thing.
If you enter in hard reset mode (clean boot screen), press and keep "no" button and IMMEDIATELY press and keep "yes" button: "image file not found" appears in a green colour message.


Some things about this:
This works in my new PNY 2GB microSD but not in sandisk 2GB microSD.
If I formated PNY 2GB microSD in PC it not work :(
If I formated PNY 2GB microSD in canon camera it work :)
I think exist one relation between bootloader and SD formated sistem.

[HDJ80]

If I formated sandisk 2GB microSD in canon camera, now it work :)
And now flame detec it inmediately after soft reset :)

[TourisT]

thanks to www.todopocketpc.com , the user Sanfe, and mssmobiles:

"O2 Asia no more, welcome MWG!
November 03, 2007 [General] | By Edward J. Rutkowski.

O2 is withdrawing from Asia but old O2 Asia team has created new a new company - MWG. Interestingly the new company will continue good old tradition of releasing Windows Mobile phones. Even though O2 Asia has dumped HTC is manufacturer - for the sake of Quanta mainly - it was always a strong supporter of Windows Mobile. Now the MWG will continue this tradition and apart from supporting old Xda phones, it even preannounces future Windows Mobile phones: "Xda Atom 4", "Xda Flame 2" and "Xda Zinc 2"!

MWG is a new face in the Smart Phone market, based in Singapore the international hub where European style and quality meets and mingles with Asian industry and innovation we aim to bring a fresh approach to mobile communications and mobile computing.

The team at MWG includes all the former management of O2 Asia, MWG will continue to support O2 device owners and channel partners and we have inherited an exciting roadmap which we will deliver through 2008.

Browse the site today, and come back soon, it will be developing significantly over the next few months and we will make all our exciting new product announcements here first!"

flame 2 anounced:
http://www.mwg.com/xda-atom-life.aspx

[Yudgin]

ok i get bootloader but for 0ne seconds on screen
:)

Please, write your full act.
Very much people can't entered in bootloader...
We have a ROM image, but can't open bootloader.

Please help me and all peoples...

[psyCORe]

my finding today on intel2700g on Axim vs Goforce5500 on Flame (http://www.youtube.com/watch?v=8nK8Y7lx38o)

gawd, unexpected Axim pawn Flame... :eek:

[HDJ80]

http://img165.imageshack.us/img165/8519/08112007005rn3.th.jpg (http://img165.imageshack.us/my.php?image=08112007005rn3.jpg)
sorry, it is taked with N70.

Text in screen said "UPDATE EBOOT nb0 via SD CARD."
IMPORTANT: I used sandisk 2GB micro SD card formated in Flame with resco file explorer.
With this card in the Flame, push and hold pulsed at least for 3 seconds the 2 keys "-" in the flame, now you reset and hold the keys and waiting boot and hold the keys.
Do not release the keys "-" at any time.
Make backup before try it.

[CWKJ]

Suggest you get someone help to video you making the Flame into Bootloader.

We all tried but cannot get into it.

[HDJ80]

Suggest you get someone help to video you making the Flame into Bootloader.

We all tried but cannot get into it.
Are you used one micro SD card formated in Flame with resco file explorer?

Look at this http://www.xdaflameusers.com/viewtopic.php?id=224&p=2

[HDJ80]

The video is in ftp://xda:xda@ftp.xda-developers.com/uploads/upload/MVI_0391.avi
Sorry, only 20 sec. but 12MB.

[jags1]

plz share it if anyone knows anything about flame2 what is it? looks like we won't get any rom upgrade until they release and sell flame2 first,anyone working on rom,any progress? tahnks

[zakeen]

Ive been busy looking around the web from time to time seaching for the flame 2 and I cant seem to find anything at the moment. im kinda hanging out for it as I need a new phone and was thinking about the flame. But I know, if I buy the flame, flame 2 will come out the next day!

[thierryb]

Ive been busy looking around the web from time to time seaching for the flame 2 and I cant seem to find anything at the moment. im kinda hanging out for it as I need a new phone and was thinking about the flame. But I know, if I buy the flame, flame 2 will come out the next day!

Please buy the flame !
And flame 2 will come!
And we will get wm06 for our flame !

[zakeen]

as I was typing my post I was thinking someone was going to say that. If I had money to burn then yes I would buy the flame and then the flame 2 the next day :)

[jags1]

i sent an email questioning o2 about upgrades and same thing with mwg,wrote them too, no one answered ,so i guess they have no answers left for us.

[Yudgin]

Hi all!

I have lost the bootloader in my FLAME as a result wrong upgrade ROM.
Now i try to recovery device through JTAG.

YOUR HELP is NECESSARY!!!!!

It is necessary for me to a high quality foto of the device without a back wall (cover).

If you already prized your FLAME, or for you warraty was already completed - please, help me!
Remove the battery, unscrew screws, remove a back cover and make foto.

We will be knocked down, that 5 contacts near Sim-slot. I hope, that it and is JTAG and together we can fiтв correspondence of contacts.

This operation will serve then as a guide on recovery of the device killed by an upgrade.

I'm sorry for my bad English

[Yudgin]

Ok, i get foto! :)

See http://4pda.ru/forum/index.php?showtopic=58179&view=findpost&p=1170636

[aamoxda]

This link must be usefull for you.

https://fjallfoss.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=749423&native_or_pdf=pdf
:)

[Yudgin]

very nice job!!!!


Big-big thanks!!!!!

[mrinternet]

sdhc.777 of course killed any micro SD from working.. :eek:
uninstalled..ok now.

I Have a 6GB from my hermes I MUST MAKE IT WORK..

[HDJ80]

http://cgi.ebay.es/NEW-O2-XDA-Flame-TriBand-NVidia-3-6-VGA-2GB-Unlocked_W0QQitemZ110196715653QQihZ001QQcategoryZ6 4355QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[thierryb]

sdhc.777 of course killed any micro SD from working.. :eek:
uninstalled..ok now.

I Have a 6GB from my hermes I MUST MAKE IT WORK..

Discussed here:
http://www.xdaflameusers.com/viewtopic.php?id=14

[jags1]

anybody tried cyberon voice-command if that works on flame? meant to work perfect.

[Demon]

Any way to cook a WM6 rom? Any such project ongoing?

[thierryb]

We have started to work on that with cwkj on xdaflameusers.com and probably other have tried on 4pda.ru.
But because we are not able to flash securely a rom, we are not encouraged to even modify the wm5 rom.
We are also waiting other devices designed by Arima for Imate on the Ultimate serie that would have wm6 and probably the same design and components.

Visit us at XFU.

[AKTOPSHOOTER]

Does anyone know of a good keyboard cab to run on the flame? I have tried to load the cooltek one however nothing happens it just uses the original even when selected. I also have downloaded the keyboard through O2 connect however it is just way too big taking up the majority of the screen. If anyone has a great keyboard to use please pass it along

[TourisT]

I have the same problem with third party keyboards

try to uninstall SPB products (pocket plus,...)

[ccc]

It has been found how to flash an OS image to XDA Flame ROM:

http://www.xdaflameusers.com/viewtopic.php?id=344

http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_1.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_1.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_2.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_2.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_3.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_3.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_4.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_4.jpg)

Now the way to make custom ROM should be open. All the best,

devictoria

[S1MB4D]

SOMEONE MAKE OS FOR WM6 PLZ!!!!!!!!!!!!!

It has been found how to flash an OS image to XDA Flame ROM:

http://www.xdaflameusers.com/viewtopic.php?id=344

http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_1.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_1.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_2.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_2.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_3.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_3.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_4.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_4.jpg)

Now the way to make custom ROM should be open. All the best,

devictoria

[CWKJ]

Congratulations!!!

[CWKJ]

Now the flashing is good, anyone figures out the complicated XIP with drivers?

http://www.xdaflameusers.com/viewtopic.php?id=256

[HDJ80]

It has been found how to flash an OS image to XDA Flame ROM:

http://www.xdaflameusers.com/viewtopic.php?id=344

http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_1.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_1.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_2.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_2.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_3.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_3.jpg) http://www.xdaflameusers.com/uploads/thumbs/112_xda_flame_reflash_os_4.jpg (http://www.xdaflameusers.com/uploads/112_xda_flame_reflash_os_4.jpg)

Now the way to make custom ROM should be open. All the best,

devictoria

It is true, it works.
You MUST format the card with FAT 16.
I used pocket mechanic to format the card ( FAT16 and Cluster size 32K) and I managed to make it work.

[amirmw]

It is true, it works.
You MUST format the card with FAT 16.
I used pocket mechanic to format the card ( FAT16 and Cluster size 32K) and I managed to make it work.

where did you find diskimage.nb0 and 1xdtgklo.kez ?
and please write your rom & radio version before and after flashing OS
and can you tell us this process step by step ...
thanks alot

[HDJ80]

Ah! Before making "logical format" I have done "low level format," both with "pocket mechanic"

[HDJ80]

where did you find diskimage.nb0 and 1xdtgklo.kez ?

diskimage.nb0 in extendedROM.
1xdtgklo.kez: I have done a file named "1xdtgklo.txt" and I changed the name to "1xdtgklo.kez"

and please write your rom & radio version before and after flashing OS

Before and after flashing OS is:
ROM version WWE_RC1070309
Bootloader version V2.2C601
GSM version P6A2
extROM version WWE_RM_070516
RIL version v08.60
These are the same because I used my own file "diskimage.nb0"

and can you tell us this process step by step ...
thanks alot

Step by step: http://www.xdaflameusers.com/viewtopic.php?id=344

This is my 1xdtgklo.kez in zip format.

[amirmw]

thank a lot for description

[pasha1976]

I have done a file named "1xdtgklo.txt" and I changed the name to "1xdtgklo.kez"
Step by step: http://www.xdaflameusers.com/viewtopic.php?id=344

But here devistoria says "1xdtgklo.kez - a file named "1xdtgklo.kez", serving as a password. It may be an EMPTY file."
And your attached file is not empty, there is one SPACE in it and its size is 1 byte.

[HDJ80]

But here devistoria says "1xdtgklo.kez - a file named "1xdtgklo.kez", serving as a password. It may be an EMPTY file."
And your attached file is not empty, there is one SPACE in it and its size is 1 byte.

Yes, it's true, but it works.
I tried different ways to format the microSD and different 1xdtgklo.kez, and that is that I have worked.
There are other ways they can work, but this has worked to me.
I am sure that also works if you put a empty 1xdtgklo.kez file.
I think that the 1xdtgklo.kez file may be empty, but that does not mean it should be empty.

[danny3358]

You will be surprised when you look at here :::: WM6 version

http://www.iio2.com/thread-2353-1-1.html

[CWKJ]

You will be surprised when you look at here :::: WM6 version

http://www.iio2.com/thread-2353-1-1.htmlOnly pictures at the moment, but no uploads yet.

Hope we can download soon.

[kdskamal]

Only pictures at the moment, but no uploads yet.

Hope we can download soon.

Yep. I too checked with google translator and even got myself register there to see if the WM6 is avaliable. Darn, they are teasing flame users with the screenshots.

[CWKJ]

Yep. I too checked with google translator and even got myself register there to see if the WM6 is avaliable. Darn, they are teasing flame users with the screenshots.I do not need google translator.

Saw my post there? Translated it? :D

Saw in another thread that they are saying they have long term relation with Expansys and they will become an official website of MWG. Interesting.

Looks like most of the user are from China.

Hope can download soon, from the Chinese or the Russians.

[mustbiw]

where should I go to upgrade xda flame frm wm5 to wm6???
thanx..

[pisey001]

HERE

http://www.seeo2.com/product/XdaFlame/template/XdaFlameFeatures.vm

WTF IS IT COMING TO THE UK?


Dear Senior Member:

I have bought Flame in Cambodia. I can't connect 3g connection.
Could you please show me how? or they have software to fix this problem.

BEst Regards,
Pisey

[S1MB4D]

Dear Senior Member:

I have bought Flame in Cambodia. I can't connect 3g connection.
Could you please show me how? or they have software to fix this problem.

BEst Regards,
Pisey

hey firstly i am in the uk and havent a clue if cambodia even has a 3g network! also you might need to check if you have enabled it in the settings > phone > band selection and set to 3g to make sure not only 3g is available but also the phone is only going to check for 3g, apart from that you are better off asking some more experienced guys including CWKJ (http://forum.xda-developers.com/member.php?u=319678) HDJ80 (http://forum.xda-developers.com/member.php?u=220135) thierryb (http://xdaflameusers.com/profile.php?id=8)

[CWKJ]

Dear Senior Member:

I have bought Flame in Cambodia. I can't connect 3g connection.
Could you please show me how? or they have software to fix this problem.

BEst Regards,
Pisey
Interesting news if you google "Cambodia+3G".

For you problem, few things to check,
1. Did you set it to "2.5G" or "3G" or "Automatic" mode?
2. Is your area covered with 3G network although it may say it is launch in Cambodia?
3. If answers to Q1 is "3G" and your area confirms to have "3G" network, then it is time to send your Flame to service centre.

When Korea first launch 3G, it covers only Seoul.

[mrinternet]

where should I go to upgrade xda flame frm wm5 to wm6???
thanx..

The million dollar question. No where at the moment, we are all waiting for Rom Chefs, O2/MWG.

There isn't a WM6 for the Flame that works at moment.

[rorszaik]

The million dollar question. No where at the moment, we are all waiting for Rom Chefs, O2/MWG.

There isn't a WM6 for the Flame that works at moment.



Wonder how we could get this in the USA. Any suggestions?

[zakeen]

Any news on the Flame 2? I dont know weather I should get a N810 Nokia or wait for the Flame 2........

[Menneisyys]

Any news on the Flame 2? I dont know weather I should get a N810 Nokia or wait for the Flame 2........

Not a single word as yet... that is, I'd bet at least half a year for it to hit the shelves (if at all).

[zakeen]

but the site mwg says coming soon. Soon is not longer then a month is it?

http://www.mwg.com/xda-flame-2.aspx

[CWKJ]

Wonder how we could get this in the USA. Any suggestions?Get Flame or get WM6.

Get Flame, look at the web like expansys, ebay etc, Flame is only launch in Asia.

WM6 for Flame? Sue O2!!! I suppose you can do that in US.

[CWKJ]

but the site mwg says coming soon. Soon is not longer then a month is it?

http://www.mwg.com/xda-flame-2.aspxThey also said WM6 is coming soon when they launch Flame with WM5.

And we have not smell anything burning yet. How long is that, you can go and figure it out.

[zakeen]

So what do you guys think? Should I buy the Flame? I have a Tytn with WM6, am I going to miss WM6 if I get a flame with WM5?

[greatestkelvin]

It has been sometime since I last checked this link, man there are still so many people complaining about this lousy O2 Flame. As I used to own one, O2 sent me an email a few days ago informing me that their support in Asia has been sold to another company. Looks like you guys are going to get poor support for a very long time. For those hoping for a WM6 upgrade, I would say forget it as nobody is going to pay for it. A few months back I posted a few messages informing everyone that O2 flame is a lousy pdaphone with so many complaints about battery life, lousy support, no WM6, it gets overheated..... but the moderator warned me not to do so... looks like I am right afterall.... Listen to my advice as I currently own more than 6 Pda devices..

[S1MB4D]

thought you may want to take a look at this over at the xda flame forum

"Now that we all know that support staff at O2 are polite but unable to address specfic issues, related to WM6.
I did speak to someone there, and they said the rumour is that there is a problem with WM6 working with the NVIDIA GPU.
This makes sense in that that the GPU they are using in the flame, has been superceded.
When I asked them to guess about WM6 based on this they thought that when the flame 2 is released (with WM6) they will likely release WM6 for the Flame 1 then.

This was me asking them to guess, but the most sense I have heard so far.

Make sure before you folks progress on any issue with O2 / MWG, that you varify with the, that use are using the most up to date official O2 ROM.
Any updates from O2 will mean needing that updated ROM supposedly first.

I am also avoiding emails to O2 / MWG unless to set up a phone call.
Emails are easier for them but harder to avod things in a conversation.

Regards and Merry CHristmas Folks"

[thierryb]

all the HTC devices have had a better support and upgrade from xda devs than from HTC or operators. It is the same concerning xda flame. Visit XFU, it is similar to xda devs but for the flame

The Flame is alone in its category : a real pda with a 3.5" vga. In addition it is a phone. And it has no keyboard.

Concerning wm6, you will see that afeng11 has already a prototype. I am also working on it. I am quite sure you will have it as it exists wm6 for a lot of devices orphaned of their vendors, but not abandonned by their users.

Flame is a great device, even with the minor bugs it has, and without wm6.

Before you purchase it read again the description of its category. if you prefer a phone, with pda functions, do not buy it.
If you need keyboard to write only sms. do not buy it.

I use the flame instead of a laptop between 4 and 8 hours by day reading and writing mail, taking notes, surfing the net, seeing or streaming video, driving with my gps, earing or recording fm radio and so on.
With usb host, 2 gb internal flash memory, 128 Mb memory, there is no device of its size than can beat the flame for me.

Perhaps the flame2, but we do not know yet its characteristics and when it will be available.
So take a flame, moreover you will pay it half of the price we have paid it.

[amirmw]

Hi guys
Look at this :
http://www.seeo2.com/support/XdaFlame/template/ServiceMenu.vm#software
Did anybody download this Upgrade Patch for XDA FLAME?
if anybody downloaded it, can upload it in other place in the net?
this patch is for Australia only ...
with this address :
http://www.seeo2.com/user/XdaFlame/template/XdaFlame_AU_patch_Aug2007.vm
this is the file name : "XdaFlame_AU_patch_Aug2007.vm"
and Asian customers can't downoal this patch ...
the O2 company didn't let them to download that patch
they found from IMEI
thanks alot

[neo_com_3]

all the HTC devices have had a better support and upgrade from xda devs than from HTC or operators. It is the same concerning xda flame. Visit XFU, it is similar to xda devs but for the flame

The Flame is alone in its category : a real pda with a 3.5" vga. In addition it is a phone. And it has no keyboard.

Concerning wm6, you will see that afeng11 has already a prototype. I am also working on it. I am quite sure you will have it as it exists wm6 for a lot of devices orphaned of their vendors, but not abandonned by their users.

Flame is a great device, even with the minor bugs it has, and without wm6.

Before you purchase it read again the description of its category. if you prefer a phone, with pda functions, do not buy it.
If you need keyboard to write only sms. do not buy it.

I use the flame instead of a laptop between 4 and 8 hours by day reading and writing mail, taking notes, surfing the net, seeing or streaming video, driving with my gps, earing or recording fm radio and so on.
With usb host, 2 gb internal flash memory, 128 Mb memory, there is no device of its size than can beat the flame for me.

Perhaps the flame2, but we do not know yet its characteristics and when it will be available.
So take a flame, moreover you will pay it half of the price we have paid it.
M8, you so right. This tool makes me think that I do not have any other option in order to replace it with something else. It has its own category...

[neo_com_3]

my finding today on intel2700g on Axim vs Goforce5500 on Flame (http://www.youtube.com/watch?v=8nK8Y7lx38o)

gawd, unexpected Axim pawn Flame... :eek:

Well, keep in mind that Flame is also a... phone! The GSM part can use much power of the processor while playing the video. You should turn off the phone and turn on the turbo mode on Flame. Still, you should not compare PPC vs Phone-PPC...

[seal]

Does anyone know how to pull apart the flame, I have removed the screws but that is as far as I can get, it seems to be really tight, I am sure there is a method and I don't know it!!!!! Please if anyone know please let me know, I have not ruled out the grinder.........

[seal]

Please, Please, Please anyone know how to pull this phone apart?????

[Menneisyys]

Well, keep in mind that Flame is also a... phone! The GSM part can use much power of the processor while playing the video. You should turn off the phone and turn on the turbo mode on Flame. Still, you should not compare PPC vs Phone-PPC...

Actually, it wasn't streaming. If you disable 3G (see my related tutorials), your standby time will be days - that is, in no way effecting battery life while playing videos.

[Menneisyys]

Well, keep in mind that Flame is also a... phone! The GSM part can use much power of the processor while playing the video. You should turn off the phone and turn on the turbo mode on Flame. Still, you should not compare PPC vs Phone-PPC...

also, don't forget that the GF 5500 isn't currently supported by CorePlayer, let alone the abandoned TCPMP. The 2700G is, but it only helps with ASP videos, not with, say, AVC ones. (See my related articles for more info on the latter)

[neo_com_3]

Actually, it wasn't streaming. If you disable 3G (see my related tutorials), your standby time will be days - that is, in no way effecting battery life while playing videos.

M8...
I am not talking about battery life. My point is that a PPC-Phone will share the power of the CPU to the GSM part and to all running apps. So, Flame does more while playing the video. So it is unfair to compare it with a PPC without Phone...

[Tuningszocske]

Please, Please, Please anyone know how to pull this phone apart?????

I hope it will help. I uploaded one pdf file with the pictures of the Flame inside.

http://rapidshare.com/files/83607198/flame-inside.pdf.html

[malamen]

Guyes i noticed that when the battery is dead, and you press the on button a screen comes up saying that the power is too low to switch on. On that screen there is also a point that sais what temp it it, that seems to be always accurate.
I was wondering, is there any way to use that theremometer in normal mode? ie when the phone is running?

please help, cos it would be a cool gadget

[Rambalac]

I found that my EM-ONE has hardware acceleration for WMV in WMP. Also i found NvWMV.dll in \windows folder as in registry. What Nv*.dll files do you have in Flame?

[thierryb]

\windows\nvwmpplugin.dll;8332;2007/06/20
\windows\nvvideorenderer.dll;86768;2007/06/20
\windows\nvh264transform.dll;38140;2007/06/20
\windows\nvaudiotransformfilter.dll;39312;2007/06/20
\windows\nvmpeg4transformfilter.dll;38120;2007/06/20
\windows\nvbsp.dll;10436;2007/06/20
\windows\nvbacklight.dll;10940;2007/06/20
\windows\nvsdhc.dll;22612;2007/06/20
\windows\nvcam.dll;119368;2007/06/20
\windows\nvrm.dll;14852;2007/06/20
\windows\nvddi.dll;211528;2007/06/20

[Rambalac]

Thaks, very interesting
\windows\nvh264transform.dll;38140;2007/06/20
\windows\nvmpeg4transformfilter.dll;38120;2007/06/20
and
\windows\nvsdhc.dll;22612;2007/06/20


Would it be hard exporting registry with whole branchs from System or Software where there is using of that file names? And could you send that files?

[seal]

I hope it will help. I uploaded one pdf file with the pictures of the Flame inside.

http://rapidshare.com/files/83607198/flame-inside.pdf.html

Thanks heaps for the link.

[ultraprimeomega]

any progress on the wm6 porting?

[thierryb]

answer is here:
http://www.xdaflameusers.com/viewtopic.php?id=33

[ultraprimeomega]

answer is here:
http://www.xdaflameusers.com/viewtopic.php?id=33

Thanks for the site. Now i have somewhere to go for XDA Flame answers

[ccc]

You can unhide (unlock) the extended rom safely using this unhide cab file (http://forum.xda-developers.com/attachment.php?attachmentid=66444&stc=1&d=1200668960). You need to install this cab and then to do a soft reset to make the extended rom visible.

You can hide (lock) again the extended rom safely using this hide cab file (http://forum.xda-developers.com/attachment.php?attachmentid=66445&stc=1&d=1200668960). You need to install this cab and then to do a soft reset to make the extended rom hidden.

These cab files do nothing other than to change the following registry values:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ TFFS2]
"Bootphase"=dword:00000000 to 00000002 and back
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ TRUEFFS_DOC1\FATFS]
"MountHidden"=dword:00000001 to 00000000 and back

Best wishes, devictoria :-)

[Rambalac]

I need that files for my EM-ONE. I was able to enable 3d acceleration using files from Flame. Now i'm trying to make mp4 hardware acceleration.

[thierryb]

I will post you all the files and the registry of our last official rom here this weekend.
http://www.xdaflameusers.com/viewtopic.php?id=33

We have started a new thread on our work on wm06 thanks to afeng.
http://www.xdaflameusers.com/viewtopic.php?id=442

[rol___]

nope :D then it will become john, smith :p

You need to set the parametes for the contacts in your Outlook program.
When editing in Outlook, one of the options is how you want to have the name dislpayed. It asks for either way, and you choose the display that you prefer.

[thierryb]

I need that files for my EM-ONE. I was able to enable 3d acceleration using files from Flame. Now i'm trying to make mp4 hardware acceleration.

http://w15.easy-share.com/15524851.html
Hope it will help.

[HDJ80]

http://www.xdaflameusers.com/viewtopic.php?id=442&p=4
Please read the topic before trying, can be dangerous to your machine.
http://www.xdaflameusers.com/viewtopic.php?id=344
http://www.xdaflameusers.com/viewtopic.php?id=442&p=1

[HDJ80]

http://xdaflameusers.com/viewtopic.php?pid=4776#p4776

[-qwerty-]

And here you participated! :)

PS Sorry fo my English.

[ccc]

Here is my first version of XDA Flame kitchen. I use it myself and it may be useful to somebody.

Cheers,

devictoria (ccc)

[Th3keeper]

Here is my first version of XDA Flame kitchen. I use it myself and it may be useful to somebody.

Cheers,

devictoria (ccc)

Hi sorry new dude here. May I know what is a Flame Kitchen and what isit used for? At the same time how am I able to back up my current rom before I flash over the new WM06 one? Sorry for all the noob questions. Tried searching for it but am still quite lost.

Help is MUCH appreciated.

[CWKJ]

Finally!!!

[AKTOPSHOOTER]

Screen shots or a video would be nice I am at work sorry I am die'n to see this thing in action. Any feedback would be greatly appreciated :eek:

[lastnikita]

I need that files for my EM-ONE. I was able to enable 3d acceleration using files from Flame. Now i'm trying to make mp4 hardware acceleration.

Any success ? Do you think one can do something for the flame ?

[Rambalac]

Any success ? Do you think one can do something for the flame ?

No, i have imported everything that had mp4 and all their guids, copied files, but still no mp4 in WMP :(

[midazolam]

I've read through the thread, but haven't found a reference or fix to this bug...

Essentially, the led remains flashing orange ONLY regardless of whether or not the phone is charging or whether or not bluetooth or WiFi is enabled.

The O2 diagnostic shows the LED can cycle through all four colors, but the flashing orange returns after a soft reset or complete power-off.

Anyone have any similar experiences or advice (apart from a hard reset?)

[CWKJ]

There is also situtation when the blinking Orange LED indicates that there is missed calls or unread inbox.

[midazolam]

Thanks for the reply, CWKJ. Good point re: the notification blinking.

In my case, the orange blinking LED continues unabated, regardless of the charging, WLAN, or bluetooth status. And I have no pending or unread notifications.

In fact, I'm one of those U.S. users who imported their Flame for its specs, but found out on arrival that voicemail notifications do not work with their local network (AT&T/Cingular, in my case). It makes me wonder if the two issues are related somehow?

[liomojo]

No, i have imported everything that had mp4 and all their guids, copied files, but still no mp4 in WMP :(

do you want me to send you the dll,s from my i-mate 6150 and the registry.
if you need any help just write me. you helped me sending me the opengl supporting dlls and i am verry thankfull when you saw my post at the nvidia support forum.
if you need anything just say:)

[bova]

new rom WM 6.1 gprs working

http://www.xdaflameusers.com/viewtopic.php?id=794

[liomojo]

who should i ask to make a wm6.1 rom for the ultimate 6150. i cant do it my self cause i dont know how to do it and i am not an it specialist, if someone has the will please write back.

[CWKJ]

http://www.ultimates.biz/modules/newbb/

Looks like you are already a member there.

[liomojo]

but there is nobody that is trying to do something about it , that knows much about computers. obviosly here are the guys who are capable of miracles.:)

[flame on o2]

Hey guys, I looked for a "buy and sell" option on this forum and I do see any. Is there one?

I'm selling my O2 Flame which I used very little. It's such a great device but I'm just not getting these hacks. I got the 8gb card to work but get no wifi....

Anyway, if anyone is interested I'm in chicago but can ship outside USA if you are honest. Selling for $285.00.

Thanks.

[ayesha]

Dear All,

I have xda flame and it is not showing I mei. and Radio Also can any one help i uploaded the new rom on it .

Best Regards
Zaheer

[igord]

Hey guys, I looked for a "buy and sell" option on this forum and I do see any. Is there one?

I'm selling my O2 Flame which I used very little. It's such a great device but I'm just not getting these hacks. I got the 8gb card to work but get no wifi....

Anyway, if anyone is interested I'm in chicago but can ship outside USA if you are honest. Selling for $285.00.

Thanks.
285$, and that is your FIRST post. OK I will take it, but send me the phone and when I get it I will send you the money.

[flame on o2]

285$, and that is your FIRST post. OK I will take it, but send me the phone and when I get it I will send you the money.

First post as user FLAME ON 02 but I have another user name which I can no longer use because I do not have the email I registered long ago and I forgot what the password was. So I had to start FRESH. I have sold MANY things with zero complaints at my favorite website for selling things. If you care to take a look the link is below. So, if you are REALLY interested let me know.

Thanks.

http://forum.brighthand.com/search.php?searchid=1190849

[TourisT]

Hi,
has anybody tried to install the new TT7?:
http://forum.xda-developers.com/showthread.php?t=401679

it says "not compatible device...", but I'm using EFN WM6.1
maybe with standard WM5 it works...

[mike freegan]

Hi guys. I can't really trawl through 86 pages of thread, so could someone tell me if you got SDHC to work on the XDA Flame without disabling wifi? It would be useful to know because it is manufactured by the same people as my Imate 9502, and I would love SDHC to work.

[sx1-doc]

i sold my flame because of this problem.

no sdhc with wifi for flame ,same with imate, you have to choose one of them(that sucks).

all devices from arima have there problems,none of MWG or imate care about this.

[mike freegan]

i sold my flame because of this problem.

no sdhc with wifi for flame ,same with imate, you have to choose one of them(that sucks).

all devices from arima have there problems,none of MWG or imate care about this.

I-Mate have confirmed that they are working on the problem and expect SDHC soon. Maybe that will be of use to Flame users.

[CWKJ]

You can find a working ROM, SDHC with Wi-Fi, published by Cotulla on www.XdaFlameUsers.com

[xeirwn]

Hi guys!

I'd like to inform you that I've uploaded some videos (in Greek language sorry)
with some great NVidia Goforce 5500 demos

http://www.youtube.com/watch?v=PfULOBBbnTo
http://www.youtube.com/watch?v=-LjYODQV_cM
http://www.youtube.com/watch?v=eO9IBLWvv6o

A must-see especially to those who don't own a Flame! (to see what they're missing..) :D

Sorry for the bad quality, but I couldnt use Flame's camera...

Anyway I guess you get the picture!

[RussianSpv]

Where are I can buy brand new XDA Flame ?

[razer_irl]

Long time browser here but first time poster and I have a question for you knowledgeable people.

Have an option over here to get a Flame or a Tytn II.

Any recommendations on which one to get?


Always been a WM fan but I switched over to the dark side (Nokia) a few months back and now Im going back to a windows mobile.

Which one of the above two would you lot recommend??Btw the Flame is a wm5 and the tytn is 6.1.

Thanks
Richie.

[Cheeseman-]

Long time browser here but first time poster and I have a question for you knowledgeable people.

Have an option over here to get a Flame or a Tytn II.

Any recommendations on which one to get?


Always been a WM fan but I switched over to the dark side (Nokia) a few months back and now Im going back to a windows mobile.

Which one of the above two would you lot recommend??Btw the Flame is a wm5 and the tytn is 6.1.

Thanks
Richie.

Go for the HTC Tytn II, I own a Tilt myself and so far its been the best Windows Mobile Pro device I've had. It has 128MB of RAM with 256MB of ROM, a sliding keyboard, a 3MP camera, a pretty good GPS, and has a graphics accelerator. (which didn't come with proper drivers, but good-old XDA developers have come up with a D3D driver to fix that :D) I couldn't ask more in a pretty portable phone. (other than a VGA screen)

[CWKJ]

If you like big screen, wait for HTC Touch HD.

[xeirwn]

Anyone knows about the two WMP UI plugins on Core Player 1.2.5.
can be found under "Tools/Preferences/WMP UI plugins":

UIPluginRM
nvwmpplugin plugin

(Both are unchecked as they are unknown to CP)

I have another WM5 device and there I dont see these..
So there is something more on Flame! :confused:

What is their use? I found no effect checking them...
Any ideas please??