Loading Black 3.01-Bricked-Bootloader ?

[tomcat777]

Hi,
Well after 2 phones and countless upgrades, I finally bricked my hermes! I have read countless threads and the WIKI but I don't see my problem anywhere. When I soft reset my phone, it sticks at the Logo Screen(AT&T in my case). If I try to go to bootloader, it will go to boot loader screan(tri-color) for about 2-3 seconds then it goes to the loading screen that you see when you are upgrading. I have 1.01 bootloader.
I have cid unlocked and upgrading many times, but at last, I am totally stumped. Can someone point me in the right direction! Thanks

[dcoelho]

try to upgrade a complete rom from a microsd card. You can try one with SPL 1.01 if possible from your original carier. You know waht to do: you rename the nbh file to HERMIMG.nbh and put it in a empty card. with the card in the slot produce the tri-color mode.

[Wam7]

Hi,
Well after 2 phones and countless upgrades, I finally bricked my hermes! I have read countless threads and the WIKI but I don't see my problem anywhere. ...

It's a shame that you did not do the reading of countless threads and the WIKI BEFORE updating your phone, why didn't you have HARDSPL 2.10 on there?

Check the thread in my sig or/and look on the WIKI for the table that Pof kindly put together it should point you to the answer you need. It's not Black 3.01 fault so I wouldn't have mentioned it in the heading as it will insult those people responsible for Black 3.01.

[tomcat777]

Thanks everyone, I believe I am back on the right track....it seems that my microSD card was causing my phone to kick out of bootloader mode. Not sure why but I took the card out and I am now flashing back.
Thanks for all the help!!! Knowledge is power!

[tanim_1976]

try to upgrade a complete rom from a microsd card. You can try one with SPL 1.01 if possible from your original carier. You know waht to do: you rename the nbh file to HERMIMG.nbh and put it in a empty card. with the card in the slot produce the tri-color mode.

I got one Hermes100. I tried upgrade via Microsd, Upgrade 100% cOMPLETE, but after it the phoe become complete dead. No Boot Loader using Boot Sequence. Nothing not even red light when USB inserted. Any Possinility to Bring it in Boot Loader mode?

Thank U.

[Percz]

Press (at the same time) the Power Button, The OK Button on the left side and the reset button with the pen. Should go into Bootloader.
When you flash, you have to tell it what bootloader you are using as it won't autodetect.

[tanim_1976]

Press (at the same time) the Power Button, The OK Button on the left side and the reset button with the pen. Should go into Bootloader.
When you flash, you have to tell it what bootloader you are using as it won't autodetect.

Dont know what goes wrong, But here is the story, The phone was Perfect but in Japanes Langauge. O2 Trion, with DOCOMO rom in it. It was flashed for Langauge change and Update to WM2006, used DEV_HERMES_WWE_WM6 rom. Using olipro boot loader via filemanager and using sd card for flashing. It flashed 100% and after reset nothing.... No Boot Mode, No KITL, No Light when USB / Charger insert. But without battery the signal light blink RED. thats the story. Cant get any report via mtty cause I cant bring it in to boot mode.
Any help would be appriciable.

[austinsnyc]

Why do you people not read the upgrade guides before you flash your $600 phones? the first thing you HAVE TO DO is load SPLV7 on your phones with out it its like going to a whore house and expecting to not come out without some STD its just not going to happen....

[tanim_1976]

Why do you people not read the upgrade guides before you flash your $600 phones? the first thing you HAVE TO DO is load SPLV7 on your phones with out it its like going to a whore house and expecting to not come out without some STD its just not going to happen....

Thanks austin I deserve that kinda comment.... But it wont help me now I think, so I have to go to whore haouse and have some std now!!!!!!!!! SPLV7!!! if i have time maching then I will return to the date and have that on my herma!!!

Any way more comments please

[miffymiffy]

Why do you people not read the upgrade guides before you flash your $600 phones? the first thing you HAVE TO DO is load SPLV7 on your phones with out it its like going to a whore house and expecting to not come out without some STD its just not going to happen....

So poetically put, i like it! :D

[tanim_1976]

How do u like that poetry when the subject is U? Very very painful must be. Cause its still hurting me with my 600$ hermes!!! Ha ha ha ha ha ha