View Full Version : Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking
meschle
13th May 2007, 05:32 PM
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WWE Wm5 factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Pinesio
15th May 2007, 08:15 PM
Will foundling oneself such man which advise me with this problem ? whether oneself it will subject ? His HTC has to kill persons how much ? Does someone be able to this repair? How do to repair this ?
My HTC is brick. I it can not flicker rom, I it can not take off CID because I it can not him start. Whether someone can me to help or what I can they would make he he was lively.
I it can not flash rom by bootloader because do not it know from where from him download. It my HTC is from Danngard (Denmark) .
I ask help me. T - Mobile O2 Dopod - ROM do not it fit . INVALID DEVICE ID
meschle
15th May 2007, 11:21 PM
Will foundling oneself such man which advise me with this problem ? whether oneself it will subject ? His HTC has to kill persons how much ? Does someone be able to this repair? How do to repair this ?
My HTC is brick. I it can not flicker rom, I it can not take off CID because I it can not him start. Whether someone can me to help or what I can they would make he he was lively.
I it can not flash rom by bootloader because do not it know from where from him download. It my HTC is from Danngard (Denmark) .
I ask help me. T - Mobile O2 Dopod - ROM do not it fit . INVALID DEVICE ID
You do need the factory rom for your device and then flash it from bootloader mode. Contact the dealer you bought your phone from or htc denmark.
bdangol
16th May 2007, 01:13 AM
ah for me too little too late.......... still waiting for an O2 rom the bloody bas*ards!!
agento
16th May 2007, 01:46 PM
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
rvbcrs
16th May 2007, 01:47 PM
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
I'll buy it where do you live ;)
meschle
17th May 2007, 12:56 AM
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
Its only truely bricked if the bootloader is damaged - if you can get into bootloader mode you can salvage with the factory rom.
arif101
20th May 2007, 03:17 AM
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable and flash factory rom. You do not need to be activesynced to do this.
How do I flash the factory rom from here please?
meschle
20th May 2007, 03:24 AM
How do I flash the factory rom from here please?
Well you need the factory rom from o2 - o2 have not released it so there is a problem. I have not found any links to download this rom or a link to a dumped rom. I will ask others in the team if they know a link and let you know.
Did you manage to get into bootloader mode?
arif101
20th May 2007, 03:38 AM
Well you need the factory rom from o2 - o2 have not released it so there is a problem. I have not found any links to download this rom or a link to a dumped rom. I will ask others in the team if they know a link and let you know.
Did you manage to get into bootloader mode?
Yeah the device goes into the bootloader mode. If you could find out where i can get the factory rom from that would be great. Also if i could have instructions how to upload the rom in the bootloader mode i would really appreciate it.
TheGame1594
20th May 2007, 08:42 PM
whats about the upcoming crossbow rom for the o2 xda orbit.Can that be flashed to from bootloader? or is the only way to get this repaierd to send it too o2?
meschle
20th May 2007, 10:23 PM
whats about the upcoming crossbow rom for the o2 xda orbit.Can that be flashed to from bootloader? or is the only way to get this repaierd to send it too o2?
Yes if you have a uk o2 orbit and you flash the uk wm6 orbit rom it will be fine as long as you can still get into bootloader mode.
TheGame1594
20th May 2007, 11:46 PM
ok thx :) than i wait a few days for the rom and see if it work's
wakke
22nd May 2007, 09:34 AM
I have an original HTC P3300. How do I check if my device is CID locked?
I am currently running this ROM: PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap (http://forum.xda-developers.com/showthread.php?t=294830)
meschle
22nd May 2007, 11:36 AM
I have an original HTC P3300. How do I check if my device is CID locked?
I am currently running this ROM: PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap (http://forum.xda-developers.com/showthread.php?t=294830)
Unless you have unlocked you're device via imei check - you're device will still be cid locked.
wakke
23rd May 2007, 12:41 PM
Unless you have unlocked you're device via imei check - you're device will still be cid locked.
Is there any chance a tool will be released in the future which allow you to unlock your device for free?
I noticed that for other devices such tools are available.
meschle
23rd May 2007, 01:10 PM
Is there any chance a tool will be released in the future which allow you to unlock your device for free?
I noticed that for other devices such tools are available.
We hope so but none on the immediate horizon.
ialloul
24th May 2007, 12:55 PM
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
I flash my rom with wm6 buth it hangs after the update.
now it stops at the first screen. I can start the bootloader and see the usb on the bottom left screen but when i want to use the HTC P3300 WWE factory the solve the problem, i can 't connect via usb. is this because this is not the rignt ROM. I have this version on my artemis 1.12.406.1 9/12/06 FRE. Is there someone who knows where to find his version?
Another point, I've tried to put the nbh directely on my SD Card like explained on the wiki but nothing happens at all.
Please help.
eraserbabyboy
26th May 2007, 08:48 PM
http://rapidshare.com/files/19995855/ART_HTCFRA_11240601_026790_FRA_SHIP.exe
gghh
26th May 2007, 09:39 PM
Someone out there with a HTC P3300 German ROM ? I would be very pleased if someone could provide a link.....
mr_boogie
28th May 2007, 04:05 PM
can anyone help me with a TW Dopod p800W... cannot even find RUU update to try to put the WWE on it...
duy_ctytvxdkg
1st June 2007, 10:04 AM
http://rapidshare.com/files/19995855/ART_HTCFRA_11240601_026790_FRA_SHIP.exe
Can you help me! Pls give me German rom! thanks!
Pocha
3rd June 2007, 02:17 PM
Hi to all, I need Spanish ROM, if someone have one please contact me ;), I tried a SD flash, bootloader init Ok, i have a msg like that "veryfing SD content", then appear Tricolor Scrren, and in upper right corner appears RUU, it's means that Flash process started? if I plug my HTC apperas in left bottom USB...
Thanks
eraserbabyboy
4th June 2007, 03:51 PM
Which version of German Rom?
gghh
4th June 2007, 04:01 PM
The Version needed is the shiped German WM5 Rom for an unbranded HTC Device in any Version which allows to reflash the device so it can be unlocked with IMEI-Check.
/GG
eraserbabyboy
4th June 2007, 04:10 PM
Sorry, I dont have it.
biker200
5th June 2007, 10:05 AM
http://rapidshare.com/files/19995855/ART_HTCFRA_11240601_026790_FRA_SHIP.exe
hi
is this htc french rom ? or orange spv 650 french rom ?
thanks
huyanh
10th June 2007, 05:08 AM
I flash my rom with wm6 buth it hangs after the update.
now it stops at the first screen. I can start the bootloader and see the usb on the bottom left screen but when i want to use the HTC P3300 WWE factory the solve the problem, i can 't connect via usb. is this because this is not the rignt ROM. I have this version on my artemis 1.12.406.1 9/12/06 FRE. Is there someone who knows where to find his version?
Another point, I've tried to put the nbh directely on my SD Card like explained on the wiki but nothing happens at all.
Please help.
I think your device is not be CID unlocked
Shand359
12th June 2007, 04:31 PM
I stupidly tried to flash my Orbit. I thought i had unlocked it but obviously not. I can get into bootloader no problem. Can someone please help me try to salvage this please.
Pocha
12th June 2007, 11:38 PM
@ Shand359 you need to flash your orbit again with your original ROM, review wiki to see some upgrades (and first post)
Shand359
13th June 2007, 11:29 AM
I need an O2 ROM which you can't get for some reason. I have a dumped .BIN file of the ROM but don't know what to do with it.
I am about to contact O2 and see if they can repair it. As this is my fault i am expecting to have to pay for this. Don't know how much though.
Shand359
13th June 2007, 12:05 PM
I would love to but I don't have one that I can run from BOOTLOADER and can't get it into Windows to run any other one.
Pocha
13th June 2007, 03:31 PM
Same as me dude, I sent yesterday my PDA to HTC for repair... about your backup, as some posts talks, if your device is cid locked your backup is useless, because you can't make an nbh trusted file...
Sorry
haffonso
28th June 2007, 11:34 AM
Hello People,
I´m new here and I have updated my HTC p3300 withou unlock. Now, I try to flash with the ROM from the link posted on this site but it stops at 2%.
I heard about the UPL and SPL version. I guess that I have a hope at end of the tunnel. Because I can enter on bootloader.
Anybody know where I can find the original ROM ? Or another way to flash with ROMs informed on this forum ?
My IPL and SPL are 1.140000 and 1.140001.
The worst, I´m from Brazil and we don´t have HTC to repair! :(
Bunghead
28th June 2007, 05:23 PM
Yeah the device goes into the bootloader mode. If you could find out where i can get the factory rom from that would be great. Also if i could have instructions how to upload the rom in the bootloader mode i would really appreciate it.
As a fellow brick maker I'm in the queue for the Orbit O2 ROM too - Doh!
Updated my MDA with no problems - cool
crazyclimber
7th August 2007, 06:11 PM
hi, how can i unlock CID in bootloader mode?
MaskedMarauder
7th August 2007, 09:21 PM
hi, how can i unlock CID in bootloader mode?
You can't. Have you bricked your device?
crazyclimber
10th August 2007, 03:57 PM
yes, it start only in bootloader mode, and when i download new rom it show me an error (file corrupted or invalid model).
02AN
22nd August 2007, 09:40 PM
Hi, i have updated my device with Artemis_USPL program...
(I supposed i have done cid unlock..)
Now what will i do for english rom...??
Please help, i do not know anything about german-language ... :D
drkbg
17th September 2007, 07:25 PM
I have German O2 Orbit WM6.
Do I need German o2 WM6 ROM to reflash if something wrong happens or it will work also with German o2 WM5 ROM?
What about English o2 ROMs?
Where can I find factory ROM for my device, so that I'm sure I have backup plan?
Is there way to dump my ROM? And use it after that?
10x :)
meschle
17th September 2007, 08:17 PM
I have German O2 Orbit WM6.
Do I need German o2 WM6 ROM to reflash if something wrong happens or it will work also with German o2 WM5 ROM?
What about English o2 ROMs?
Where can I find factory ROM for my device, so that I'm sure I have backup plan?
Is there way to dump my ROM? And use it after that?
10x :)
either german wm5 or wm6 o2 rom will be fine.
drkbg
17th September 2007, 09:20 PM
there is one:
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
but its in the category "dumped ROMs". is there any difference between dumped and factory ROMs?
meschle
17th September 2007, 09:29 PM
there is one:
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
but its in the category "dumped ROMs". is there any difference between dumped and factory ROMs?
heres the german o2 wm6 rom http://forum.xda-developers.com/showthread.php?t=308127
Totest
19th September 2007, 01:52 PM
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WWE Wm5 factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Hello,
I have an Artemis from Movistar Spain and I'm able to enter to bootloader but I can't flash any ROM (Invalid Vendor ID). I've tried with the one you say in your text and with the spanish one from "Artemis Shipped ROM". Could you give some clues abot what is happenning and how to fix it? Thanks
Paco
Flower
19th September 2007, 05:39 PM
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
meschle
19th September 2007, 10:20 PM
Hello,
I have an Artemis from Movistar Spain and I'm able to enter to bootloader but I can't flash any ROM (Invalid Vendor ID). I've tried with the one you say in your text and with the spanish one from "Artemis Shipped ROM". Could you give some clues abot what is happenning and how to fix it? Thanks
Paco
You have to flash your factory rom - the one that originally came with your device
meschle
19th September 2007, 10:21 PM
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
Go into bootloader mode and flash factory rom flower - howto is described in my first post.
Flower
20th September 2007, 08:12 PM
Go into bootloader mode and flash factory rom flower - howto is described in my first post.
I just tried to do everything according to your instructions in the sticky. here is what I succeeded: it could not be flashed the factory rom in the bootloader mode as what the update utility gave me is that: ""ït cannot be used for your PDA Phone. Please, check your Update Utility"....
So.... i really don't know what to do... :(
meschle
20th September 2007, 08:56 PM
I just tried to do everything according to your instructions in the sticky. here is what I succeeded: it could not be flashed the factory rom in the bootloader mode as what the update utility gave me is that: ""ït cannot be used for your PDA Phone. Please, check your Update Utility"....
So.... i really don't know what to do... :(
Is you device wwe (world wide english)? - did you download factory rom from the link?
Flower
21st September 2007, 01:29 PM
Is you device wwe (world wide english)? - did you download factory rom from the link?
As far as I know - it is wwe. Yes, i have downloded the factory rom, but when starting it ends to 2%. May be it is just better to see the position my pda blocks. i put the image to this. But i am sure that the rom is in english, doesn't matter that in the start there the letters you can see.
i would be grateful if you see and write your opinion.
meschle
21st September 2007, 03:43 PM
flower - it look like you need to flash the dopod rom not the htc one. From your splash it looks like its in chinese - is it a chinese or wwe device?
Flower
21st September 2007, 05:51 PM
flower - it look like you need to flash the dopod rom not the htc one. From your splash it looks like its in chinese - is it a chinese or wwe device?
the device was bought from china. till now i haven't upgrade the rom so you are probably right.... and it doesn't matter that the software i worked on was in english right ?
so... what else i should do in order to solve the problem ?:o
meschle
24th September 2007, 01:49 AM
You'll need to flash the chinese dopod rom flower.
Flower
24th September 2007, 04:52 PM
You'll need to flash the chinese dopod rom flower.
Ok meschle, thank you for the advice.... I will... but please, tell me where i could find it ?
meschle
25th September 2007, 03:00 AM
Ok meschle, thank you for the advice.... I will... but please, tell me where i could find it ?
Try chinese dopod website or your supplier - not a rom we commonly deal with.
loney_frsu
7th October 2007, 03:11 AM
I'm using XDA O2 ORBIT
Very easily I can up grade wm5 to wm6.now its b&b v 4.1 WWE:)
BUT now I can't flash wm6 official rom to my XDA.says INVALID:(
can help me?
RaZoR X
7th October 2007, 03:57 PM
Does someone have the T-Mobile MDA Compact III Rom? I tried to download it from the Dutch T-Mobile site, but they are only hosting a small 4mb file for the MDA Compact III :confused:
mugglesquop
24th October 2007, 10:20 AM
Does someone have the T-Mobile MDA Compact III Rom?
i could do with the UK MDACIII ROM too... does anyone know if there is a factory ROM around? i'd rather find one before i try and brick my phone :p
Gerdal
4th November 2007, 01:43 PM
I need a factory ROM to ERA MDA COMPACT III (bought in Poland).... Does anyone have it?
Sorry for my poor english...
Awais
19th November 2007, 09:09 AM
i have a bricked xda orbit "stuck at booloader"
The boot loader says
IPL 3.04.0001
SPL 3.04.0000
i have tried latest official wm6 from this link of o2.de
http://www.o2online.de/nw/assets/blo...ows-update.exe
this rom xdaorbit-windows-update.exe
and also this one from o2 uk
http://member.htc.com/ruudownload/O2...tSoftware.html
this rom
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Shi p.exe
and got the same error "invalid update tool"
what it could be????
is there any special ruu (no id) for artemis ???
which factory rom i should try now???
is there any way to check the from which country this set is ????
when i write getdevinfo in mtty it says
"need password"
johnjcr63
23rd December 2007, 08:34 PM
Hi
Probably a daft question, but once i've CID unlocked my XDA Orbit will this mean that it is automatically cid unlock with IMEI? Using Artemis_USPL cid unlock
After using this software I wil be using Artemis_Touch_3.01_full
Should this work ok? It's just that I'm new to this kind of stuff?
Thanks
John
exploitation_mobilysim
4th January 2008, 12:51 PM
Hello i have a big probleme
I have put a bad spl on my artemis
I have put the spl from herald :s , and now when i start the bootloader with the 3 colours(green red and blue) and i put from my computer an other spl, i have an error [300]invalid tools.
Please help me I cant send pda to htc.
andrew_green
4th January 2008, 02:11 PM
Hello i have a big probleme
I have put a bad spl on my artemis
I have put the spl from herald :s , and now when i start the bootloader with the 3 colours(green red and blue) and i put from my computer an other spl, i have an error [300]invalid tools.
Please help me I cant send pda to htc.
Have you tried going back to your original carrier ROM via SD?
exploitation_mobilysim
4th January 2008, 04:08 PM
yes i tried to do this but i can't boot on the SD.
Perhaps it is because i can't format the SD???
Yet I do exactly what is on this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
jifranky
4th January 2008, 08:20 PM
I have a bricked HTC P3300 ARTE100, it turn on only in boot loader
IPL 3.13.0001
SPL 3.13.0000
I have the latest oficial rom downloaded from htc club with my serial number when i tried to flash with the RUU i got an error:
" ERROR [300] INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility. "
I tried via SD too but it can't work, appears "Checking SD Contents" for 2 minutes and then go to bootloader screen.
Help me please!!!!
andrew_green
4th January 2008, 08:26 PM
I have a bricked HTC P3300 ARTE100, it turn on only in boot loader
IPL 3.13.0001
SPL 3.13.0000
I have the latest oficial rom downloaded from htc club with my serial number when i tried to flash with the RUU i got an error:
" ERROR [300] INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility. "
I tried via SD too but it can't work, appears "Checking SD Contents" for 2 minutes and then go to bootloader screen.
Help me please!!!!
Have you followed the instructions in The Wiki (http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing) for SD Flashing (e.g. extracted and renamed the .nbh file)?
jifranky
6th January 2008, 08:06 PM
Yes it does not work, i tried with the original rom and appears "Checking SD Contents" for 2 minutes and then go to bootloader screen. I'm using a 2gb Kingston MicroSD card, it can be the problem?. Thanks for your help.
jifranky
6th January 2008, 08:44 PM
Have you followed the instructions in The Wiki (http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing) for SD Flashing (e.g. extracted and renamed the .nbh file)?
Yes it does not work, i tried with the original rom and appears "Checking SD Contents" for 2 minutes and then go to bootloader screen. I'm using a 2gb Kingston MicroSD card, it can be the problem?. Thanks for your help.
andrew_green
7th January 2008, 10:52 AM
Yes it does not work, i tried with the original rom and appears "Checking SD Contents" for 2 minutes and then go to bootloader screen. I'm using a 2gb Kingston MicroSD card, it can be the problem?. Thanks for your help.
It's not an instantaneous process, it will take about 30-45 minutes.
jifranky
8th January 2008, 11:26 AM
It's not an instantaneous process, it will take about 30-45 minutes.
I understand, but the process don't start, it go to bootloader screen. Sometimes says "invalid certificate" and then go to bootloader screen other times don't say anything.
pksarkar
21st January 2008, 02:40 AM
How do I find ut if my o2 XDA Orbit is CID unlocked?? It is SIM Unlocked since I moved to Fiji Last year and have been using it on the local Vodafone Network.
The reason being, I'm thinking of upgrading it WM6 and don't want a brick in the process.
Cheers,
petervbeck
22nd January 2008, 12:26 AM
How do I find ut if my o2 XDA Orbit is CID unlocked?? It is SIM Unlocked since I moved to Fiji Last year
CID unlock has nothing to do with SIM unlocking.
When your device is CID unlocked you'll see it when you soft reset your device - SPL is 1.11 = you're CID unlocked.
greenleef
8th February 2008, 12:11 AM
Hi, I've made my own extended ROM, used all the files from the origninal nbh except the extended rom file. Sorry if I'm being dumb, but how to I flash it to my orbit? I know I have to CID unlock it.... but.... ??
Thanks:)
satarielxx
5th March 2008, 04:33 PM
one question
i have one MDA Compact III from T-Mobile Germany. This Phone is now brandingfree (i got it from a customer)
Now i want to flash it back to "Original" T-Mobile
Can i use the ROM WM6 from www.t-mobile.*e site??
Is this ROM from the site an "Original ROM"??
When i want to flash it back must i unlock CID??
IPL: 1.14.0000
SPL: 1.14.00001
thx :)
nakarin55
6th March 2008, 03:45 AM
after I flash my O2 Orbit with original rom WM5, It has ERROR 226 Flash Write. What should I do ? and I try to flash by sd card but it has an error again with "SD FAT Failed" please help me . Thanks
matisamd
8th March 2008, 02:01 AM
okay lol its been an evening alright but looks like you saved me :) thanks. Well i learnt alot in past 5 hours or so, now i am ready to flash again but this time i know what to do ish lol ;)
ianian
8th March 2008, 02:01 PM
messaged deleted
ultimatekaiser
1st April 2008, 12:16 AM
hey, wenever i try to cid unlock my Artemis, i open the file but i always get the error 260. it says it cannot connect however the usb cable is connected properly. i think the phone goes into some kind of mode where the screen goes blank and the only way to get out of that mode is by soft reseting. the active sync stops connecting when this happens and i don't know what to do to make this stop.
Please Help!
- I'm running on vista in case this has sometging to do with it.
thanx.
mayflyer
15th April 2008, 01:14 PM
Hi guys I have Artemis, bootloader not available, but when I connect phone to PC activsync available. When I started flashing him, he said that you need newer update utility? Can you give me work rom...
athanaso77
11th May 2008, 03:14 PM
Hi!
Did anyone managed to bypass the ERROR [300] INVALID UPDATE TOOL problem? My device in stack in bootloader and every ROM (including official) i try to flash i get the same error.
What can i do to make my bricked O2 Orbit to work?
ElVikin
18th October 2008, 11:33 PM
Yes it does not work, i tried with the original rom and appears "Checking SD Contents" for 2 minutes and then go to bootloader screen. I'm using a 2gb Kingston MicroSD card, it can be the problem?. Thanks for your help.
did u get it to work? or does anyone else know how to? i have excatly same issue
ElVikin
22nd October 2008, 09:50 PM
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.....
i have as i stated in other treads a problem my phone suddle couldnt be turned on, only get into boot mode. someone told me that i need original rom that was shipped with my device but i cant find the cd i found the empty paper case for it (like that would help me)
my spl and the other thingy is 3.13.0001 3.130000
I downloaded original wm 6 and upgrade from offical homepage but it says wrong vendor id or something like that. does anybody know if my device will take the original wm5 rom? (if i would find my cd or the rom another way (tried for many days now)
naruto_kun
23rd December 2008, 05:31 PM
i flashed my P3300 with AJE rom then i wanted to flash it back with official wm6 rom. At 9% the connection is broken.
RUU asked me to remove the battery and return it again, i do and after that nothing. The P3300 don't want to go on. I press power button, i do soft/hard reset and nothing happened.
I think the phone is bricked.
Can you help me having the phone working again ?
Sturmovick
23rd December 2008, 11:47 PM
I'm having problems with my 3300 (Arte100). it turns off suddendly and I must restart it over and over. I've tried a Rom upgrade, but when it goes at 2%, it crashes and return me an error like "the device model is wrong".
Could anyone advise me the correct one running WM6?
Thanks in advance.
muthapratikg
25th December 2008, 10:30 AM
:mad: PLEASE HELP ME
IM FACING A PROBLEM OF APPEARING WHITE SCREEN
sbettencourt
7th May 2009, 03:18 PM
Hi ppl
I have one P3350 ARTE 30000, and have a brick :(
Where i can find an original WM5 ROM, WWE???
i have this data running MTTY:
IPL 1.36.0001,
SPL 1.36.0000,
GSM 02.67.90,
OS 3.4.0.0
I searched at the Artemis available ROM´s on Wiki and i don´t find anything for ARTE 30000...
Anyone can tell me where i can find???
thank´s in advance...
Zecanilis
7th May 2009, 10:44 PM
Hi ppl
I have one P3350 ARTE 30000, and have a brick :(
Where i can find an original WM5 ROM, WWE???
i have this data running MTTY:
IPL 1.36.0001,
SPL 1.36.0000,
GSM 02.67.90,
OS 3.4.0.0
I searched at the Artemis available ROM´s on Wiki and i don´t find anything for ARTE 30000...
Anyone can tell me where i can find???
thank´s in advance...
I can't say if it will work, but try this one:
ftp://upload_user:upload_user@ftp1.pdafans.com:2122/RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEon gsm4.1.13.30_02.69.90_Cmp_Ship_R.exe
Cheers
edit : Dead link sorry... :|
sbettencourt
7th May 2009, 11:45 PM
Thank´s Zecanillis for the reply and attention:)
Yep... the link is dead...maybe someone have that ROM and upload soon...
Zecanilis
8th May 2009, 01:31 AM
I have a love too, but never tried this ROM...
So you will be the first that i know to try...
Good luck... :D
http://www.4shared.com/file/104024783/96ec9940/RUU_Artemis_DOPODASIA_WWE_LOVE_1287171_INFINEongsm 411330_026990_Cmp_Ship_R.html
Cheers
sbettencourt
8th May 2009, 01:35 AM
I have a love too, but never tried this ROM...
So you will be the first that i know to try...
Good luck... :D
http://www.4shared.com/file/104024783/96ec9940/RUU_Artemis_DOPODASIA_WWE_LOVE_1287171_INFINEongsm 411330_026990_Cmp_Ship_R.html
Cheers
Ohhhhh.... I will trie yes :) then i will say if it work´s :)
Obrigadaoooooooo Zecanilis :) o LOVE não é meu, mas vou já lhe passar o Link e espero que resulte... Mal saiba o resultado digo-te!
Obrigado
TalhaQasim
8th May 2009, 03:18 PM
Can anyone tell me that can I install the official HTC Touch Cruise Rom in my HTC P3300 by unlocking it by a USPL.
Thanks in advance if someone helps me.
sbettencourt
8th May 2009, 03:32 PM
I have a love too, but never tried this ROM...
So you will be the first that i know to try...
Good luck... :D
http://www.4shared.com/file/104024783/96ec9940/RUU_Artemis_DOPODASIA_WWE_LOVE_1287171_INFINEongsm 411330_026990_Cmp_Ship_R.html
Cheers
Didn´t work :(
Thank´s anyway Zecanilis... I think the guy is missing something... HTC Love, and with a ROM in PT and UK, allways gives incorrect CID... smells wrong... i don´t know...
Now he Know´s the power of doing CID-Unlock first :D
Zecanilis
8th May 2009, 03:36 PM
Can anyone tell me that can I install the official HTC Touch Cruise Rom in my HTC P3300 by unlocking it by a USPL.
Thanks in advance if someone helps me.
No you can't!
Zecanilis
8th May 2009, 03:38 PM
Didn´t work :(
Thank´s anyway Zecanilis... I think the guy is missing something... HTC Love, and with a ROM in PT and UK, allways gives incorrect CID... smells wrong... i don´t know...
Now he Know´s the power of doing CID-Unlock first :D
Yes that's true.. Specially for Love, because it doesn't have shipped ROM...
I never needed it till now, and i allready flashed hundreds of times... :D
Power of USPL.. :D
ronaksv
9th May 2009, 02:04 PM
I have HTC P3300 and it came with WM6 with the following config.
ROM : 3.7.701.1 WWE
ROM date : 6/21/07
Radio : 02.69.90
Protocol : 4.1.13.30
ext Rom : 3.6.707.101
Now i want to upgrade it to WM6.1
I SEARCHED THRU MANY POSTS. i got so many answers to my questions but i have some fundamental questions and if anybody can answer that i will be really obliged.
1) I have vodafone India. Can i flash a ROM which is for another carrier. For eg. when I searched the thread "Artemis_Upgrades" I could not find any HTC WWE factory ROM which matched the above specs. BUT when i saw the factory ROM of DOPOD WM6. It matched the above specs perfectly.
so the basic question is if anything goes wrong in my upgrade then can I flash the DOPOD rom on my HTC
2) I have searched the forums but i could not find a valid factory WM6.1 ROM. If anybody can provide a link then it would be a great help to me. Please also specify which ROM (dopod or any other) is compatible to my HTC.
3) Once i get both the above factory ROMs (WM6 and WM6.1) i will be flashing my HTC and the steps that i would follow is as mentioned in this post
http://forum.xda-developers.com/showthread.php?t=401814
1) soft -reset using the USPL
2) flashing the ROM.
Please let me know if I need to do anything other than this!
Thank you in advance.
morpheus01
18th May 2009, 10:31 AM
Hi Guys,
I am new on this system...
I am in possession of an HTC P3300 called Artemis too.
Last week I tried to install a new rom cooked but probably the CID was looked and I didn’t know.
I read that there is a new tool from Mr. POF "Artemis_USPL.zip" but I cannot run because this says to establish a connection with AS but in bootloader mode AS doesn’t see my PDA.
Please help me! I am distraught!
Thank you in advance for your answer
www.g5m.ro
28th May 2009, 02:55 PM
i try flash with: "Tom_ART_v2.00.01PDAVIET_CB"
And new phone not run OS, only power and stop in first screen with HTC and say:
IPL: 1.12.0001
SPL 1.11.0000
GSM 02.67.90
OS 1.28.0.0
www.g5m.ro
28th May 2009, 06:51 PM
i try flash with: "Tom_ART_v2.00.01PDAVIET_CB"
And new phone not run OS, only power and stop in first screen with HTC and say:
IPL: 1.12.0001
SPL 1.11.0000
GSM 02.67.90
OS 1.28.0.0
to put in BOOT mode must pres power button and in left side UP is record button and at same time press reset with stylus for short time and keep another 2 buton and enter in boot mode !!! THX :)
kricha
6th August 2009, 03:15 PM
I couldn't run start_uspl.exe in Windows 7 X64 because it said 'unsupported 16 bit application'.
How could I run uspl? or any other way to unlock CID?
Thanks for any suggestion.
vukashin
27th August 2009, 06:45 PM
Hi, all!
I have a T-mobile MDA Compact III model and once I have updated my OS to Artemis Touch 4.0. Since then I cannot install any other ROM. Whenever I try to install, RGB screen appears and after a couple of seconds Update aborts with error code 260 (don't know what is that). My SPL is 1.11.0000. Does anyone know what is the problem and how can it be fixed? Thanks in advance.
amjad4u
3rd September 2009, 06:53 AM
When I start the phone, I got the Bootloader mode.
The screen reads
IPL 3.07.0001
SPL 3.07.0000
When I connect the phone via USB Cable to PC, i got the following
The bottom line says 'USB'
The top right corner says 'RUU'
I tried to flash the Original ROM using SDCard, But after fave minute got "SD FAT Update Failed!!!
When I try to run the original 'ROM' using the 'ROM Update Utility', I got the 'Error[226]:FLASH WRITE ERROR
Tell me please... WHAT I DO?
vukashin
8th September 2009, 08:49 PM
I have finally found a solution for my problem. I found this ROM which helped me solve my problem. This is the only ROM which I was able to install on my T-Mobile MDA Compact III:
http://rapidshare.com/files/277360439/Artemis_0409_bepe_0.53_Full.rar
Now I am able to unlock my phone and install any ROM I want.
KJ Sekeira
1st October 2009, 06:30 PM
Hi everyone...
I've tried to cid unlock my artemis but I wasn't able to do it...
any clues?
When I trie to install a rom (oficial Portuguese 3.14) it gives me Invalid vendor ID...
What could I been doing wrong?
Thanks in advance!
Cramiekske
9th October 2009, 12:30 PM
I have a bricked device, well sort off I can get into bootloader, but that's all. I managed to borough an identical P3300 from a friend. So I could dump his original ROM and upload into mine.
Could someone please explain how to dump the original ROM for further use?
Or point me to a threat where this is explained since I could not find anything.
Thanks for your help
Aloosh99
16th February 2010, 06:07 PM
how i can know if my cid is unlocked after doing the cid unlock
kyriakosss
15th July 2010, 04:13 PM
Hello, My 3300 its bricked....can someone re upload the factory rom cause that link at the first post its dead?
kvnxp
24th July 2010, 05:35 PM
Hi .. my p3300 is bricked ....!!! CID bricked .. have boot mode ... but RUU see error 300 ... how to fix this problem .. fix CID to flash ... original rom no work error 300... and .mtyy to flash no work .. HELP !!! y need save my p3300 :'(
Kal1n
19th February 2011, 10:50 PM
All ok
I have no problem
strat7ender
25th February 2011, 09:25 PM
When I start the phone, I got the Bootloader mode.I connect the phone via USB Cable to PC.
tried to flash the Original ROM using SDCard, But after fave minute got "SD FAT Update Failed!!!
When I try to run the original 'ROM' using the 'ROM Update Utility', I got the 'Error[226]:FLASH WRITE ERROR
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.