Artemis Windows Mobile 6 WWE

[bepe]

This ROM is based on the official German O2 ROM:
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
- replaced the localized packages
- removed the O2 operator package (Settings and O2 Theme)

Big thanks to rvbcrs for helping and mirroring

I don’t have an Artemis... ok, my girlfriend has one, but she would kill me if I use that... so the ROM has not been tested.
Please report all problems here.

!!! This thread is not for questions about unlocking the device !!!
(http://www.ramonshare.com/files/index.php?share=4&path=ROMS%2FHTC%20Artemis%2FWM6-By-Bepe%2FARTE_WWE_WM6.rar)- In case that you have questions about that open your own thread -

Download the ROM by reading and clicking the red text :D

http://www.imagehosting.com/out.php/i657597_Cap1.png (http://www.imagehosting.com)

[bepe]

Some screen captures: (again thanks to rvbcrs!)
http://www.imagehosting.com/out.php/i657598_Cap2.png (http://www.imagehosting.com)
http://www.imagehosting.com/out.php/i657599_Cap3.png (http://www.imagehosting.com)
http://www.imagehosting.com/out.php/i657600_Cap4.png (http://www.imagehosting.com)
http://www.imagehosting.com/out.php/i657601_Cap5.png (http://www.imagehosting.com)

[phsnake]

whAT about to compile it to nbh back? for exam use dopod Radio, empty extrom. And flfash it back?

[tom_codon]

Bepe ..!
this is cool :D :D :D
Thanks a lot

[sparcle]

---updated---
Thought to try using the PDAMobiz package and replace the ROM and give it a try even though it's based on pdocwrite.. Result is an error during writing at some time.. So kids don't try this is you don't know how to recover using the bootloader or you'll have a brick.
------
I'm actually flashing it at the moment... I hope I won't regret this..
... but somebody has to try..

[eddie2k3]

We had some problems to flash the OS.nb using pdocwrite... if someone has a solution for this, please help us

worked with small error, reset works perfect now
I need to upload pics but not allowed here..

[sparcle]

Hi,

Can you tell us how you flashed it ? From bootloader results in a CRC/Certificate error.. Using pdocwrite (modified from PDAMobiz) resulted in a somewhat delayed write error here.. So what did I miss ?

worked with small error, reset works perfect now
I need to upload pics but not allowed here..

[eddie2k3]

Hi,

Can you tell us how you flashed it ? From bootloader results in a CRC/Certificate error.. Using pdocwrite (modified from PDAMobiz) resulted in a somewhat delayed write error here.. So what did I miss ?

press voice command button and press reset -colour bars - loaded success
then used ARTE from FTP site, copied os.nb to arte folder and rename it to windows.nb -run upgraderom.bat.

[sparcle]

Update:

Never mind. Figured it out..

--
Hi,

What file exactly do you mean (filename pls) ? I only know of the PDAMobiz roms which are installed using a batch file.. The only ARTE I know if the official Dopod firmware update but it doesn't come with a batch file..

press voice command button and press reset -colour bars - loaded success
then used ARTE from FTP site, copied os.nb to arte folder and rename it to windows.nb -run upgraderom.bat.

[eddie2k3]

Hi,

What file exactly do you mean (filename pls) ? I only know of the PDAMobiz roms which are installed using a batch file.. The only ARTE I know if the official Dopod firmware update but it doesn't come with a batch file..


is your device orbit ?
is it cid-unlocked ?

then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.

after u get german rom installed , run ARTE os flash utility from xda ftp.
ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack

copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat

hard reset, soft reset done.

[lysy201]

hello

how to run arte flasher on vista 64bit?


thanks

[sparcle]

Requires a reset here since the os.nb/windows.nb update never finishes visually.. After that it works fine (after the reset needed during the missing bmp when customization attempts to start), exactly as you described.. Works great :)

For those wondering.. Works fine under Vista (32 bit version).. No idea about 64 bit version.

is your device orbit ?
is it cid-unlocked ?

then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.

after u get german rom installed , run ARTE os flash utility from xda ftp (log in properly) link don't work if not logon properly..

ftp://ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack

copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat

hard reset, soft reset done.

[rvbcrs]

I tried to flash it yesterday with the updaterom.bat file and it just stayed copying to my phone so I thought it did not work, but after killing the process after 25 min and resetting my phone I had WWE WM6 on my Artemis, still I think it is strange that pdocwrite never finishes. Apart from that great ROM some minor issues..

[skakers]

Cant download full ROM, only 24 M and stop, tried few times. Can someone upload to different place. Please!!

[Registerme]

This ROM is based on the official German O2 ROM:
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
- replaced the localized packages
- removed the O2 operator package (Settings and O2 Theme)


bepe, can you tell me how much free RAM you have? I hope that you have more than 30 MB by removing all the O2 stuff. I never had more than 30 MB after a hard reset and some of my apps need 30 but I have only 20 now.

[indiekiduk]

I was wondering if the apps e.g. windows live messenger are still in German?

[zaizaihn]

is your device orbit ?
is it cid-unlocked ?

then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.

after u get german rom installed , run ARTE os flash utility from xda ftp (log in properly) link don't work if not logon properly..

ftp://ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack

copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat

hard reset, soft reset done.
Why i can't download form this link? I saw that: " 530 Permission denied". Pls tell me why? I want to use English. Thanks!

[jamin100]

My Orbit is from O2 UK, does it still have to be CID unlocked to get this WM6 on it?

[bepe]

bepe, can you tell me how much free RAM you have? I hope that you have more than 30 MB by removing all the O2 stuff. I never had more than 30 MB after a hard reset and some of my apps need 30 but I have only 20 now.
I dont have the device... but I asked someone for some screencaptures

I was wondering if the apps e.g. windows live messenger are still in German?
It really is a WWE rom... I replaced all German files and rebuilded (not edited!) the Registry based on the WWE packages. The screencaptures will prove it :D

[Registerme]

I suppose you really know how to do this stuff. Can you tell me which tools I need for "cookin" my own ROM? I'd like to have it in German and with my own Ext ROM, maybe I can get rid of some apps that waste my RAM. I only need the names of the tools, I'd guess they are on the xda-dev ftp server. And how do I extract the ROM from the installation file? In your signature you have a nice GUI for the Hermes stuff, is it the same for the Artemis. If you want you can send me a short PM in German.

By the way, the link should be: ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip thats what people say about error 530

[bepe]

I suppose you really know how to do this stuff. Can you tell me which tools I need for "cookin" my own ROM? I'd like to have it in German and with my own Ext ROM, maybe I can get rid of some apps that waste my RAM. I only need the names of the tools, I'd guess they are on the xda-dev ftp server. And how do I extract the ROM from the installation file?
I'm using my own tools (see my Signature)... I can upload a German Rom Kitchen for Artemis... but need some time for that

about extracting the rom: Open the RUU exe using WinRAR and extract the nbh file. There are nbh tools to extract the OS.nb.

[pythons]

hello...
i have CID-unlocked P3300.
Can i flash first German O2 ROM and after flash OS.nb?
(i wont new radio etc)

[bepe]

hello...
i have CID-unlocked P3300.
Can i flash first German O2 ROM and after flash OS.nb?
(i wont new radio etc)

yes, that is possible... but there will be this error if you install the ext rom too
39552

that is because of this two lines inside \Extended_ROM\Config.txt
SHOW:\Windows\background_320x320_24b.bmp
EXEC:\Windows\cusTSK.exe \Windows\O2DE.tsk

but it is possible to edit the Config.txt inside the ext rom...

[Registerme]

Ok, I got it from the Temp folder, is basically the same. I downloaded the packages.sof and all the .dsm files from my P3300. Is there most of the information about the other stuff in your Hermes kitchen thread, cause then I will simply read everything in there and will try to cook my first ROM =D - the files that the package tool lists when I select build package are those the files from my old ROM or do I have to extract them from the 6.0 ROM ?

[LargePig]

Sorry guys, please could you help me out with this?

I have a UK CID-Unlocked Orbit,

So have I got this right?

1) Install the official Geman WM6

2) Extract os.nb, rename to windows.nb, flash with UpgradeRom.bat
This flashing for some reason does not complete.

3) I hard reset the device, then when I get missing bmp error, soft reset

4) Done

Or have I got confused?

[bepe]

Updated the first two posts for some screen captures :D

[bepe]

Ok, I got it from the Temp folder, is basically the same. I downloaded the packages.sof and all the .dsm files from my P3300. Is there most of the information about the other stuff in your Hermes kitchen thread, cause then I will simply read everything in there and will try to cook my first ROM =D - the files that the package tool lists when I select build package are those the files from my old ROM or do I have to extract them from the 6.0 ROM ?

1. you need to extract the OS.nb
2. dump it using mamaich's IMGFS tools
3. create packages using my Package Tool

[agento]

Hi,

Can this be used to fix my bricked Orbit? Currently it is NOT CID unlocked?

I can get to the bootloader no problem, will the official German Rom work?

[vo1968]

Done it, no problems apart from it didn't complete install. so after 25 mins unplugged, did reset & tapped screen to set up. much quicker to respond to screen taps & when using file explorer Windows file opens in about 5 seconds instead of the usual 45ish. So very nice, so far.

[pythons]

hmmm...

after installing German original ROM and reboot - all ok, windows normal start and work...

then i upgrade windows.nb and reboot - pda freeze on boot O2 screen and ROM version message...

try again? or something wrong with windows.nb?

[scarface]

I can upload a German Rom Kitchen for Artemis... but need some time for that



That would be really cool. Could somebody cook a german rom without ext rom??

[j0kkk3r]

The german version installed fine, and working.
But after installing WWE version ... it stuck on boot screen ...
(tryed twice Orbit UK, unlocked) :(

[sandoval]

I bricked my dutch CID unlocked MDA III C..

I recieved a REPLLOG.exe error on my PDA, then on the computer:

CopyFileToTFFS(windows.nb:0, 0, 03900000)
ERROR: ITWriteDisk - An existing connection was forcibly closed by the remote host.

It doesn't boot anymore!! What to do now?

[cyrx666]

i got exactly the same thing, installed the german rom on my compact III all was well and good, trued the WWE version, doesn't wanna boot, had to go back to the bootloader and put original t-mobile rom back on

[marcoma]

Same problem here... installed german O2 rom with no problems, then downloaded ARTE.ZIP, put the OS.NB file into the same folder (after unzipping off course), renamed it to Windows.nb and started the Romupdate... stopped with an error and now after Hard and Soft reset it won't get past the boot screen... HELP.... All I see is the O2 logo with the IPL, SPL, GSM and OS info... that's it...
Will try to go back to the german O2 version now...

edit: OK - at least it seems one can reflash with the O2 'official' ROM again by connecting the device and manually going into the bootloader (hold Voice-command button and press reset). phew....

[bepe]

I can not help with that... I dont have the device, but it worked for some ppl.
If someone of you find a solution, please share it

[adrenalin]

Same problem here. CID Unlocked UK Xda orbit.

German rom works fine, but WWE version locks at splash screen.

Using Activesync 4.5.5059 if that makes a difference!

[wadialdoor]

Same problem here. CID Unlocked UK Xda orbit.

German rom works fine, but WWE version locks at splash screen.

[rvbcrs]

I can not help with that... I dont have the device, but it worked for some ppl.
If someone of you find a solution, please share it

It looks like it is a problem with the newest Itsutils or with your cable, if you use the arte.zip as found on the FTP (someone wrote it some posts back) it wil work. There is only one problem the copying of the rom will never finish atleast that is what itsutils reports, but if you wait for about 20 minutes and then just press reset on your device it is WWE.

UPDATE:

While I was typing this I got this error:
ERROR: ITWriteDisk - An established connection was aborted by the software in yo
ur host machine.

So forget my post :)

[hotatomic]

Same problem here. CID Unlocked UK Xda orbit.

German rom works fine, but WWE version locks at splash screen.

Same problem here but upgrading finished with ok !!!
But stucks on o2 bootscreen :(

[tamAyT]

WHAHAHA

I tought...what the hell...and installed this rom succesfully on my CID LOCKED device only using the arte.zip method. Only error so far was with the automatic configuration after the hardreset --> it stuck. Then I softreset and all still goes well so far :D
So...check out my new signature :p

[ferid]

German running fine.
Tried updating in the bootloader by using arte, but I keep getting the error: "no device connected"
Tried on 2 PC's.

[rvbcrs]

German running fine.
Tried updating in the bootloader by using arte, but I keep getting the error: "no device connected"
Tried on 2 PC's.

It won't run at the bootloader, you got to have a working phone with a ActiveSync connection else the Arte batch update methode wont work.

[ferid]

Sorry. Didn't know that.
Already updates once in Windows. Same problem as the rest, device doesn't boot.
I'll try again.

[Perjan]

WHAHAHA

I tought...what the hell...and installed this rom succesfully on my CID LOCKED device only using the arte.zip method. Only error so far was with the automatic configuration after the hardreset --> it stuck. Then I softreset and all still goes well so far :D
So...check out my new signature :p

Could you describe step by step how you did it and which os you are using (vista/xp)

[Bullerfnis]

Been getting the same errors as above... seems like the problem is the device starting to hang... trying some tweaks and will report back

That did the trick!!!

1. Installed the orig dutch firmware
2. Uploaded omapclock to the device
3. removed all today items, overclocked to 216 (around that)
4. let arte do its work for about 25mins
5. cheerd :)

Oh yea... this is from a first time flasher :P

[wadialdoor]

Start Time: 14:21:03.95
*
* HTC ARTEMIS All Rom uprade utility
*
* Total process may take about 15-30 minutes depends on CPU speed.
*
Initializing.One or more CON code pages invalid for given keyboard code
.............*
*
* Start Time:
14:21:57.98
*
* Upgrade OS: This process takes about 12-20 minutes depends on CPU speed
* Please wait...
*
* After 30 minutes if it hang, just press at reset
*

3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 f8 0b 01 08 23 1e 03 0b 07 09 06 cc
CopyFileToTFFS(windows.nb:0, 0, 03900000)
ERROR: ITWriteDisk - An existing connection was forcibly closed by the remote ho
st.

* End Time
14:29:24.27
*
* Congratulation! (If there is no error message.)
Please Hard Reset your HTC Artemis to use new OS rom.
(Left and Right soft key button (hold) + Soft reset,
after new message display, press dial up botton to format storage
*
* Enjoy Tapping... Good Luck...
Press any key to continue . . .




after hard reset stock at boot screen


help please

[rvbcrs]

Been getting the same errors as above... seems like the problem is the device starting to hang... trying some tweaks and will report back

That did the trick!!!

1. Installed the orig dutch firmware
2. Uploaded omapclock to the device
3. removed all today items, overclocked to 216 (around that)
4. let arte do its work for about 25mins
5. cheerd :)

Oh yea... this is from a first time flasher :P

Hi,

Can you share this original Dutch firmware?

[Bullerfnis]

Hi,

Can you share this original Dutch firmware?

Theres a link to it on the first page m8

[sandoval]

Dutch is NOT the same as GERMAN!!! Besides that, do you have a dutch rom??

[Bullerfnis]

Dutch is NOT the same as GERMAN!!! Besides that, do you have a dutch rom??

lol sorry... my mistake... you see in my language dutch is allmost the same as our word for german..

used the GERMAN firmware then..

[pythons]

im now use your method, and after 10-15 min, maybe, can boot with new WM6 WWE :)

[rvbcrs]

Theres a link to it on the first page m8

That's a good one that's German, and indeed German is a bit different than Dutch :)

[ferid]

Because of the BMP error the customization packages won't be installed?

[mogre]

the update worked fine with me.

[mogre]

the only diferense from the german rom is the dial pad

[pythons]

wow, with omap overclock method - all ok!
boot without problems.
i have wm6 wwe now!

[RudydG]

Question, has anyone succesfully flashed with a dutch (= nederlands ;-) version? Or a wwe version?
I don't want the german version (no offence!!)
And if yes, how did you people succed?

[bepe]

Ok, so I think everything is working fine... the missing bmp problem is related to the ExtROM and this is only the OS part, so it is not my problem :D

Hope someone is interested in a French version of that rom :)

[Bullerfnis]

Question, has anyone succesfully flashed with a dutch (= nederlands ;-) version? Or a wwe version?
I don't want the german version (no offence!!)
And if yes, how did you people succed?

yea yea... i think we all got the idea now :)

Using omapclock i succeseeded using WWE... seems like some models cant handle the pressure unless overclocked...

[LargePig]

is your device orbit ? Yes
is it cid-unlocked ? Yes

then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method. What? I extract the file linked in red at the top here and flash what file to my phone how??

after u get german rom installed - Is that what i just did above with the file from the rar?
,

run ARTE os flash utility from xda ftp.
ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack
copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat - OK, I get this bit

hard reset, soft reset done.

Please help me, this is very unclear

[lysy201]

Rom working for me


But what about media hub? shouldent be with wm6 as standard?

[Registerme]

Hey bepe, can you share the German os.nb so not everyone has to find out how to extract it from the original ROM? Would save many people the time to find out all the command line stuff. I think you said that the one that you posted is English, right?

[jamiee]

Hi Guys.

It looks like there have been some problems with this today & a few of us haven't got any work done!!!

The way I got it to work (after 4th attempt):
Flash with German rom

*** important bit ***
Run upgraderom.bat from arte folder with windows.nb also in folder when your atom is asking you to configure screen positions

The original few tries left me at the O2 screen, or past that with a white screen, but the right noises.

Good luck!

[TryOG]

By the way... The thread name is wrong... It's not a WWE rom, but a GER rom... :)

[duke_stix]

would this rom work on a CID LOCKED XDA Orbit from the UK?

thanx

[bepe]

Look the pictures, looks like WWE for me :D

[indiekiduk]

By the way... The thread name is wrong... It's not a WWE rom, but a GER rom... :)

The thread name is correct. The point of this thread is he replaced the localization files in the GER ROM making his own WWE. It shouldn't be too long until the offical WWE ROM appears on O2 UK's website but this is still very cool stuff.

[bepe]

Hey bepe, can you share the German os.nb so not everyone has to find out how to extract it from the original ROM? Would save many people the time to find out all the command line stuff. I think you said that the one that you posted is English, right?

use this to extract the nbh file that you got from "xdaorbit-windows-update.exe" using WinRAR
NBHextract.exe RUU_signed.nbh

[Registerme]

Thanks bepe, you are the best! Is there somewhere a documentation how to change what?

The easiest ist the Splash-Screen since this is already there. Is there a connection between the MainSplash.bmp and MainSplash.nb? I'd suppose that I may need to change both to convert the Splash Screen correctly. Splash Screen is the second right, so boot screen is something else, I'd guess hidden in the ext-rom.

Would be cool to change the Ext-ROM and so on, I'd help building files.


Does anyone know if Windows Live works with those cooked ROMs?


By the way, that's what the package tool tells me, what does it want from where?


[Selected Path]
C:\arte\package_tool_v1.01\

[Core OS]
Windows Mobile-based Pocket PCs

[Versions]
SYS: 5.1.15096.3000
OEM: 1.12.0.0
NET: 2.0.5238.0
OEM: 8.4.112.407
OEM: 8.6.112.407
SYS: 5.1.15096.0
OEM: 8.1.112.407
OEM: 8.2.112.407
OEM: 8.3.112.407

[Language]
0407 - German (Germany)

[DPI]
96

[Certificates]
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=OEM_UpdateCert
CN=HTC__102

[Missing Files]
SYS\SMIME
MODULE: exsmime.dll

SYS\3002411e-ebfd-4829-b317-5c0d40a58707
MODULE: dlagent.exe
MODULE: cebits.dll
MODULE: mdsmailsvc.dll
MODULE: cebitsxf.exe
MODULE: imgupdatecsp.dll

SYS\DRM
MODULE: wmdrm.dll

SYS\RUNTIMES
MODULE: olece300.dll
MODULE: atlce300.dll
MODULE: mfcce300.dll

SYS\MSXIPKernel
MODULE: coredll.dll
MODULE: certmod.dll
MODULE: regenum.dll
MODULE: fsdmgr.dll
MODULE: diskcache.dll
MODULE: fsreplxfilt.dll
MODULE: device.exe
MODULE: fatutil.dll
MODULE: pm.dll
MODULE: hd.dll
MODULE: filesys.exe
MODULE: crypt32.dll
MODULE: fatfsd.dll
MODULE: imgfs.dll
MODULE: busenum.dll
MODULE: mspart.dll
MODULE: osaxst0.dll
MODULE: devmgr.dll

SYS\Transcriber
MODULE: TranscriberSip.Dll
MODULE: TraShapeSelector.Exe
MODULE: Transcriber.Exe

SYS\Enterprise
MODULE: ipsecsvc.dll
MODULE: scard.dll
MODULE: l2tp.dll
MODULE: ipsec.dll
MODULE: winscard.dll

SYS\NetCF
MODULE: mscoree.dll
MODULE: netcfagl2_0.dll
MODULE: mscoree2_0.dll
MODULE: netcfd3dm2_0.dll
MODULE: cgacutil.exe

SYS\BROWSING
MODULE: urlmon.dll
MODULE: ws2instl.dll
MODULE: eapchap.dll
MODULE: iexplore.exe
MODULE: jscript.dll
MODULE: dhcp.dll
MODULE: ppp.dll
MODULE: browser.dll
MODULE: ntlmssp_svc.dll
MODULE: wspm.dll
MODULE: asyncmac.dll
MODULE: ssllsp.dll
MODULE: wzcsapi.dll
MODULE: winsock.dll
MODULE: cxport.dll
MODULE: ntlmssp.dll
MODULE: browsres.dll
MODULE: mlang.dll
MODULE: wininet.dll
MODULE: eap.dll
MODULE: eaptls.dll
MODULE: zlib.dll
MODULE: credsvc.dll
MODULE: eapol.dll
MODULE: nspm.dll
MODULE: secur32.dll
MODULE: msscript.dll
MODULE: IECEExt.dll
MODULE: iphlpapi.dll
MODULE: wlclient.dll
MODULE: ws2.dll
MODULE: wzcsvc.dll
MODULE: shlwapi.dll
MODULE: imaging.dll
MODULE: msxml3.dll
MODULE: htmlview.dll
MODULE: netbios.dll
MODULE: credprov.dll
MODULE: ipv6hlp.dll
MODULE: schannel.dll
MODULE: webview.dll
MODULE: tcpstk.dll
MODULE: tcpip6.dll

SYS\Entertainment
MODULE: BubbleBreaker.exe
MODULE: solitare.exe

SYS\SQLCE
MODULE: sqlcese30.sys.dll

SYS\Transcriber_Lang_0407
MODULE: TraRecoDeu.dll
MODULE: infantry.dll
MODULE: TraRes0407.dll

SYS\Enterprise_Lang_0407
MODULE: rdpdr.dll
MODULE: rdpapi.dll
MODULE: mstsc40.exe
MODULE: tsctrc.dll
MODULE: tsctrc.dll.0407.mui

SYS\BaseApps
MODULE: calnot.exe
MODULE: calupd.exe
MODULE: miscres.dll
MODULE: officeres.dll
MODULE: exappres.dll
MODULE: updatebin.exe
MODULE: calc.exe
MODULE: hotvoice.exe
MODULE: riched20.dll
MODULE: note_prj.dll
MODULE: mailtrns.dll
MODULE: fexplore.exe
MODULE: caldll.dll
MODULE: shellresapps.96.dll
MODULE: doclist.dll
MODULE: wldap32.dll
MODULE: poutlook.exe
MODULE: cemapi.dll
MODULE: VoiceBar.dll
MODULE: voicedll.dll
MODULE: VCOMCtl.dll
MODULE: tmail.exe
MODULE: pimdlg.dll
MODULE: shellresapps.dll
MODULE: calstore.dll
MODULE: calendar.exe
MODULE: pimapi.dll
MODULE: pimg.exe
MODULE: tasks.exe
MODULE: pimstore.dll
MODULE: VBarCall.dll
MODULE: taskdll.dll
MODULE: notes.exe
MODULE: VoiceCtl.dll
MODULE: imagelib.dll
MODULE: beam.exe
MODULE: idledetect.exe
MODULE: riresdll.dll
MODULE: pimgdll.dll
MODULE: msnewmnu.dll
MODULE: riresdll.96.dll

SYS\Entertainment_DPI_96
MODULE: bbres.dll

SYS\OS
MODULE: ethman.dll
MODULE: umarshaller.exe
MODULE: ddraw.dll
MODULE: gpsapi.dll
MODULE: commctrl.dll
MODULE: dtpt_srv.dll
MODULE: ircomm.dll
MODULE: d3dm.dll
MODULE: DwXfer.dll
MODULE: servhost.dll
MODULE: msrle32.dll
MODULE: icm.dll
MODULE: notify.dll
MODULE: gsm610.acm
MODULE: dtpt_lsp.dll
MODULE: spnego.dll
MODULE: pptp.dll
MODULE: oleaut32.dll
MODULE: dhcpv6l.dll
MODULE: dhcpsrv.dll
MODULE: omadmclient.exe
MODULE: packageinfoapi.dll
MODULE: afd.dll
MODULE: wmvdmoe.dll
MODULE: wapdrv.dll
MODULE: toolhelp.dll
MODULE: softkb.dll
MODULE: ndisuio.dll
MODULE: lassd.dll
MODULE: services.exe
MODULE: ole32.dll
MODULE: regextdev.dll
MODULE: coredpus.dll
MODULE: gwes.exe
MODULE: trustmarshaller.dll
MODULE: ossvcs.dll
MODULE: irdastk.dll
MODULE: rundll32.exe
MODULE: wwan.dll
MODULE: msasn1.dll
MODULE: veim.dll
MODULE: dtpt_nsp.dll
MODULE: dw.exe
MODULE: commdlg.dll
MODULE: dwui.dll
MODULE: netmui.dll
MODULE: ndis.dll
MODULE: tmarshaller.exe
MODULE: quartz.dll

SYS\Entertainment_Lang_0407
MODULE: bbres.dll.0407.mui

SYS\Transcriber_Lang_0407_DPI_96
MODULE: TraRes0407.96.dll

SYS\Shell
MODULE: shfind.exe
MODULE: clockdll.dll
MODULE: imgdecmp.dll
MODULE: citydb.dll
MODULE: inreplce.dll
MODULE: waveapi.dll
MODULE: pegcards.dll
MODULE: tapi.dll
MODULE: rnaapp.exe
MODULE: unimodem.dll
MODULE: aygshell.dll
MODULE: mmtimer.dll
MODULE: cemedia.dll
MODULE: inkx.dll
MODULE: wceload.exe
MODULE: cspras.dll
MODULE: find.dll
MODULE: udp2tcp.exe
MODULE: clock.exe
MODULE: ctlpnl.exe
MODULE: termctrl.dll
MODULE: cabinstl.dll
MODULE: lap_pw.dll
MODULE: shutil.dll
MODULE: pimutil.dll
MODULE: richink.dll
MODULE: audevman.dll
MODULE: ceshell.dll
MODULE: shellres.dll
MODULE: cspnet.dll
MODULE: coreres.dll
MODULE: msnsspc.dll
MODULE: rapiclnt.exe
MODULE: appinstaller.dll
MODULE: mstli.exe
MODULE: repllog.exe
MODULE: ciphase2.exe
MODULE: coldinit.exe
MODULE: irsqrt.dll
MODULE: cspomadmconn.dll
MODULE: redir.dll
MODULE: syncres.dll
MODULE: shell32.exe
MODULE: peghelp.exe
MODULE: conncfg.dll
MODULE: cspproxy.dll
MODULE: tshres.dll
MODULE: wrlsmgr.exe
MODULE: chngtrk.dll
MODULE: 1f1aca24-d942-464a-9281-10567741499c.exe
MODULE: connmgr.exe
MODULE: cspwwan.dll
MODULE: sndplay.exe
MODULE: inkobj.dll
MODULE: rra_stm.dll
MODULE: actsyncc.dll
MODULE: synccsp.dll
MODULE: cellcore.dll
MODULE: connplan.dll
MODULE: syncmgr.dll
MODULE: AutoBind_lsp.dll
MODULE: cefobj.dll
MODULE: clocknot.exe
MODULE: certinst.exe
MODULE: syncutil.dll

SYS\MediaOS
MODULE: wmpocx.dll
MODULE: wmplayer.exe
MODULE: cedrmutil.dll
MODULE: wmcore.dll
MODULE: wmvdecoder.dll
MODULE: wmadecoder.dll
MODULE: msdmo.dll
MODULE: xmeevtsnd.dll
MODULE: wmploc.dll
MODULE: mp3dmod.dll

SYS\Base_Lang_0407
MODULE: commctrl.dll.0407.mui
MODULE: IECEExt.dll.0407.mui
MODULE: outres.dll.0407.mui
MODULE: tapres.dll.0407.mui
MODULE: cespell.dll
MODULE: quartz.dll.0407.mui
MODULE: waveapi.dll.0407.mui
MODULE: shlwapi.dll.0407.mui
MODULE: shellres.dll.0407.mui
MODULE: mlang.dll.0407.mui
MODULE: netmui.dll.0407.mui
MODULE: coredll.dll.0407.mui
MODULE: coreres.dll.0407.mui
MODULE: wmploc.dll.0407.mui
MODULE: urlmon.dll.0407.mui
MODULE: notify.dll.0407.mui
MODULE: tshres.dll.0407.mui
MODULE: wsp.dll.0407.mui
MODULE: fatutil.dll.0407.mui
MODULE: commdlg.dll.0407.mui
MODULE: exappres.dll.0407.mui
MODULE: certinst.exe.0407.mui
MODULE: MdsRes_wpc.exe.0407.mui
MODULE: msimde.dll
MODULE: compime.dll
MODULE: syncres.dll.0407.mui
MODULE: shellresapps.dll.0407.mui
MODULE: MsgStore.dll
MODULE: browsres.dll.0407.mui
MODULE: msscript.dll.0407.mui
MODULE: officeres.dll.0407.mui
MODULE: riresdll.dll.0407.mui
MODULE: miscres.dll.0407.mui
MODULE: hwhelp.exe
MODULE: filesys.exe.0407.mui
MODULE: crypt32.dll.0407.mui
MODULE: unimodem.dll.0407.mui
MODULE: wininet.dll.0407.mui

SYS\Base_Lang_0407_DPI_96
MODULE: msimde.96.dll

SYS\Base_DPI_96
MODULE: browsres.96.dll
MODULE: coreres.96.dll
MODULE: exappres.96.dll
MODULE: tshres.96.dll
MODULE: shellres.96.dll
MODULE: officeres.96.dll

OEM\d4753f11-c00a-9045-43a8-a5f137a595e5
MODULE: cecompr.dll
MODULE: HtcPm.dll
MODULE: nk.exe
MODULE: HtcFsdspy.dll
MODULE: TrueFFS.dll
MODULE: ceddk.dll

SYS\PhoneRedist
MODULE: cprog.exe
MODULE: btagsvc.dll
MODULE: ril.dll
MODULE: cplphone.dll
MODULE: siclnt.exe
MODULE: cfghost.exe
MODULE: celltsp.dll
MODULE: BthAGPhonebook.dll
MODULE: phone.dll
MODULE: siminit.dll

SYS\Office
MODULE: pwwiff.dll
MODULE: gdiplus.dll
MODULE: pxl2xls.dll
MODULE: ppt.exe
MODULE: pxlfile.dll
MODULE: pptres.dll
MODULE: pxl.exe
MODULE: pword.exe
MODULE: xls2pxl.dll
MODULE: office.dll

and so on, shortened because of limited length for threads

[pythons]

ok. what about SD-corruption bug in this ROM?

[duke_stix]

Bepe

could you provide a detailed 'how-to-flash' guide for O2 UK users please.

thanx

[bepe]

Bepe

could you provide a detailed 'how-to-flash' guide for O2 UK users please.

thanx

Sorry, I dont have this device, so I have no idea how to flash it

[bepe]

Thanks bepe, you are the best! Is there somewhere a documentation how to change what?

The easiest ist the Splash-Screen since this is already there. Is there a connection between the MainSplash.bmp and MainSplash.nb? I'd suppose that I may need to change both to convert the Splash Screen correctly. Splash Screen is the second right, so boot screen is something else, I'd guess hidden in the ext-rom.

I dont know how to do this... my tools work only for the os.nb not for extrom nor Splash

Would be cool to change the Ext-ROM and so on, I'd help building files.

I think it might be possible to edit the extrom using WinImage... but the problem is how to flash it

Does anyone know if Windows Live works with those cooked ROMs?

Yes, it should be working

By the way, that's what the package tool tells me, what does it want from where?
...

all modules seem to be missing... you dumped it the wrong way, you need to use mamaich's IMGFS tools

[j0kkk3r]

Hallo to everyone Again ...
How I have wrote before, I had a problem with booting device after installing WWE, but now I found how to do it ...

1. Install T-Mobile original ROM
2. Install Artem version (wwe version) straight away ... don't install German version ...

Now everything working fine for me ...

Cheers ... :cool:

[Registerme]

Where do I get this tool?

[bepe]

http://www.winimage.com/

[Registerme]

Is it WinImage or any other Tool? Can't see anything from mamaich there, thought he was somebody from this page and thought he created a tool. With Winimage I get an error trying to oben the .nbh file. Did I get anything wrong?

About the Ext-ROM: There are some highly modified ext-roms in this forum, I this for the Wizard or the Hermes, maybe both. They have their own programs in that, how is that possible, any idea? I'd be glad if every time I have to make a hard reset all my programs I need are preinstalled.

[bepe]

@Registerme: read the PM :D

[cbprod]

im getting stuck at the part where it sys copyfiletoTffs after running updaterom.bat do a reset and it gets stuck at the boot screen.
any ideas how to fix this?

[Sjaool]

WHAHAHA

I tought...what the hell...and installed this rom succesfully on my CID LOCKED device only using the arte.zip method. Only error so far was with the automatic configuration after the hardreset --> it stuck. Then I softreset and all still goes well so far :D
So...check out my new signature :p


Explain? You've got a CID locked phone and could install this rom? Are you sure it's CID locked?

Also you've got the original Dutch HTC P3300 and not the Dutch T-Mobile MDA Compact III?

[Registerme]

I unlocked mine and flashed it with the O2 standard version to see if it was working, yes it does! BUT.....I have only 24 MB RAM :( Well but there are many improvements, as already stated, Windows folder opens in 5 sec., even when no files are hidden!

[sandoval]

I tried overclocking full install, UK tmo-> windows.nb, UK tmo -> o2 -> windows.nb.. And all compbinations of the above things, but still no luck. Keeps freezing and is then stuck at bootloader..

I put UK tmobile back on the phone, it seems I will be stuck with it till a official WWE rom is there..

Is it possible to repack OS.nb into the original rom update thingy?? Because german rom works fine, appart of being german of cource.. My german is a little rusty.. The only word german I know is herunterladen... :-)

[fabbio87]

Anyone are able to make an Italian Version of this OS for all italian users???

[gesamgr]

Guys please ....

Can I put this ROM into an O2 XDA Orbit (sim & CID Unlocked)?

What is the procedure ?

Can I return back if something goes wrong?

Will HTC make its own WM6 ROM available?

:( :confused: Please I AM TOTALLY NEWBIE!!

[Perjan]

Would this work....

- Find the temp folder which is used by the installer of the german version (easy)
-Extract the NBH file (using NBHextract)
-Replace the OS file with the one of Bepe
-Create a new RUU_signed.nbh (using ROMBaker)
-Start the german update (which is wwe as we replaced the OS)

This is what I did but i'm to afraid to flash it.... Anybody who will risk to brick his Artemis (or already bricked his)?

Instructions:

-Download file posted underneath
-Extract files
-Run ROMUpdateUtility
-Cross your fingers

!!!!!You must understand that if anything goes wrong I can't help you!!!!!!!!!
ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/Homebrew.zip
!!!!!You must understand that if anything goes wrong I can't help you!!!!!!!!!

[rvbcrs]

Would this work....

- Find the temp folder which is used by the installer of the german version (easy)
-Extract the NBH file (using NBHextract)
-Replace the OS file with the one of Bepe
-Create a new RUU_signed.nbh (using ROMBaker)
-Start the german update (which is wwe as we replaced the OS)

This is what I did but i'm to afraid to flash it.... Anybody who will risk to brick his Artemis (or already bricked his)?

Instructions:

-Download file posted underneath
-Extract files
-Run ROMUpdateUtility
-Cross your fingers

!!!!!You must understand that if anything goes wrong I can't help you!!!!!!!!!
ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/Homebrew.zip
!!!!!You must understand that if anything goes wrong I can't help you!!!!!!!!!

Unfortunatly, I tried this too it won't work because of the signature size of the Artemis .nbh file, we have to hack the SPL first, pof promised he will take a look at this in the next few days!

[rvbcrs]

In the mean time you can try this one my Dutch Artemis WM6 ROM:

http://forum.xda-developers.com/showthread.php?t=308346

[kaemon]

Hi all,
i get "ERROR [294] : INVALID VENDER ID" when launching the german WM6 for the Orbit.
Why is that ??
is it because this rom is for orbit ? ( i thought orbit and htc p3300 rom are compatible ??)

( I have the HTC p-3300 WWE Rom version 1.12.405.1 WWE).

Thanks for ur help

[meschle]

:D Hi all,
i get "ERROR [294] : INVALID VENDER ID" when launching the german WM6 for the Orbit.
Why is that ??
is it because this rom is for orbit ? ( i thought orbit and htc p3300 rom are compatible ??)

( I have the HTC p-3300 WWE Rom version 1.12.405.1 WWE).

Thanks for ur help

Read the first thread of this sub-forum - surely guys you can do better than this - read the threads - many of the questions asked are already in the thread.

the flames are coming, the flames are coming :D

[Khuanchai]

Someone may be interested in flashing your CID-locked Artemis with Bepe's Rom image. I have done this with my locked Dopod P800W. Read step-by-step here:
http://forum.xda-developers.com/showthread.php?p=1276595#post1276595

- Thanks to Bepe for this ROM image
- Don't forget to read may warning on the risk to brick your phone
- Take your own risk
- Good luck!

[Registerme]

I unlocked my device and installed the German O2 package but after that my analog dual-sim adapter is not working correctly. One card is by Vodafone and the other from T-Mobile. When I switch between those cards it still shows T-Mobile in my Display although I've switched to Vodafone. Now I don't know any more which card I'm using except I really wanna go to the telephone settings and check every time I switch my card or do a soft reset. Kinda sucks, anyone has an idea? Did I find the first Crossbow Bug ? :p

[Neozzz]

Damn my arte.zip doesn't work under Vista 64 bit. sleep4.exe isn't compatible :(

[lairdy]

i have read the posts above and cannot get my orbit rom to change to wwe,
i have updated the orbit with the german rom then pasted the os.nb from bepe`s rom(in post one) into the arte rom, changed it to windows.nb but when i run upgraderom.bat it takes seconds and i get the error message "pdocwrite.exe is not recognised as an internal or external command" .
Were am i going wrong ??
Hope someone can help please , im not very good at german !
Thanks

[Neozzz]

I bricked my phone . I was able to update to three different roms with my CID locked phone, but this time it went wrong :(

But i'm lucky, I can still enter bootloader mode. Only problem is none of the original shipped roms seem to work on my Dutch HTC P3300 device, and the arte.zip tool won't recognize my phone in bootloader mode

Is it possible to CID unlock your device using imei when your phone is in bootloader mode??
And is there maybe someone who has a Dutch original P3300 rom??

Think my phone is bricked till the end of july lol, then I assume it will update in Bootloader mode

[brco]

Hello,

can somebody help me with finding T-mobile ROM (original WM5 English)? Becouse I need that in case of death my device during upgrade to WM6.

thanks a lot

[loxs]

In case people come across this and are unsure what to do I flashed my cid-locked MDA compact III with this rom with no problems at all these are my instructions.

1, Download the ARTE (ftp://xda:xda@ftp.xda-developers.com...temis/arte.zip) file.
2, Hard Reset your device (2 soft keys and reset button) once it boots back up reset just as its about to run the customization scripts.
3, ONce you have it restarted again copy the EnableRapi.cab from the ARTE zip and install it on your device do a soft reset (stick the stylus in the little whole on the lower left)
4, once it comes up again attach USB cable and ensure Active Sync has connected properly
5, copy the OS.nb file to the ARTE folder and rename it to windows.nb
6, Run the UpgradeRom.bat this will start to flash your device it will probably hang so after 30minutes unplug the cable and give it another hard reset.
7, Your device is now WM6 WWE

Hope this helps sorry if the info has been posted allready but i like step by steps and i hope somebody finds it usefull.

Of Course I take no responsibility if this method doesnt work for you but it worked fine for me.

Cheers and good luck
loxs

[PiGeonCZ]

I unlocked my device and installed the German O2 package but after that my analog dual-sim adapter is not working correctly. One card is by Vodafone and the other from T-Mobile. When I switch between those cards it still shows T-Mobile in my Display although I've switched to Vodafone. Now I don't know any more which card I'm using except I really wanna go to the telephone settings and check every time I switch my card or do a soft reset. Kinda sucks, anyone has an idea? Did I find the first Crossbow Bug ? :p

I am not sure if I have the same problem on my wifes StarTrek, she has the SimEmu card with 5 emulated SIM. It makes the same when she uses the Simtoolkit app for switching to another SIM.
The fastest and working trick is use the CommManager to switch the phone off and on, enter the proper PIN and the right provider shows up.

[hollinshead]

Hello,

can somebody help me with finding T-mobile ROM (original WM5 English)? Becouse I need that in case of death my device during upgrade to WM6.

thanks a lot

http://rapidshare.com/files/17854890/art_tmouk_11311001_024990_wwe_ship.exe

[PiGeonCZ]

Today I was able to write the bepes WM6 ROM, although I am familiar with this way of flashing this time it wasn't so easy.
Not sure what have been wrong but I must had written the ROM 5 or 6 times.
I was always getting following ERROR:
"ITWriteDisk - An existing connection was forcibly closed by the remote host." at arround the 0x2d00000 address, dont know if it was always the same address, not sure if it was due to my battery wasn't full charged or there was something with the sectors which were kind of repaired by running the original update file everytime the boot stuck on the splash screen.

So there are few things I can high recommend before you start:
-be sure you have working update for your device (with the right VendorID), to be really sure, install the original update before you begin with writing using the upgradeROM.bat (pdocwrite.exe)
-charge the battery to 100%
-don't give up after few (5) unsuccesfull attempts ;)

The bepes file is shorter then 0x3900000, it is actualy only 0x3500000 long and thats why the process never ends.
So until bepe corrects the file you can change the command in the upgradeROM.bat
And if you want have control about the writing of the file to your phone change the command to "pdocwrite -v os.nb 0 0x3500000". The -v option shows you the actual status of writing.

I also getting the error due to missing \Windows\cusTSK.exe and \Windows\HTC_Default.tsk files when the ExtROM autorun starts after hard reset.
The solution could be if bepe can add the files to his cooked ROM.
Or you can use the steps dokumented in this thread http://forum.xda-developers.com/showthread.php?p=1155823#post1155823 and customize your ExtROM. (Delete the row which tries to start the custsk.exe)

[psows]

Please help, I need a rom portuguese! my p3300 is a big brick!!! Help!

[Neozzz]

In case people come across this and are unsure what to do I flashed my cid-locked MDA compact III with this rom with no problems at all these are my instructions.

1, Download the ARTE (ftp://xda:xda@ftp.xda-developers.com...temis/arte.zip) file.
2, Hard Reset your device (2 soft keys and reset button) once it boots back up reset just as its about to run the customization scripts.
3, ONce you have it restarted again copy the EnableRapi.cab from the ARTE zip and install it on your device do a soft reset (stick the stylus in the little whole on the lower left)
4, once it comes up again attach USB cable and ensure Active Sync has connected properly
5, copy the OS.nb file to the ARTE folder and rename it to windows.nb
6, Run the UpgradeRom.bat this will start to flash your device it will probably hang so after 30minutes unplug the cable and give it another hard reset.
7, Your device is now WM6 WWE

Hope this helps sorry if the info has been posted allready but i like step by steps and i hope somebody finds it usefull.

Of Course I take no responsibility if this method doesnt work for you but it worked fine for me.

Cheers and good luck
loxs

I used the exact same steps but still it's very tricky, my phone bricked. I recieved a REPLLOG.exe error on my PDA when upgrading. Only problem is, I don't have an original HTC Rom that will upload to my phone in bootloader mode. So i'll have to wait for retail WM6 update.. all I want to say is that flashing this one to a CID - locked is risky, and you need to be lucky ;) . If i'm right, nobody succeeded in flashing this to a HTC model?? Only Orbit's and Compacts have success!

Correct me if i'm wrong

[CAVADIAS]

Just something I noticed:
I was unable to flash it using Windows XP, the process took only 6 minutes and it ended, after hard-reset i was stuck at the O2 screen.
Once I tried it on my friends Vista 32bit it worked fine. (Still got error message) and process took 11 minutes.

Cheers

[Khuanchai]

The bepes file is shorter then 0x3900000, it is actualy only 0x3500000 long and thats why the process never ends.
So until bepe corrects the file you can change the command in the upgradeROM.bat
And if you want have control about the writing of the file to your phone change the command to "pdocwrite -v os.nb 0 0x3500000". The -v option shows you the actual status of writing.



Great! I have tried this and it works fine.
Is there any problem with this smaller ROM image file? Any possibility to modify the file to increase program storage memory?

[PiGeonCZ]

Great! I have tried this and it works fine.
Is there any problem with this smaller ROM image file? Any possibility to modify the file to increase program storage memory?

I don't think there is another problem then the problem with infinite writing sing the wrong pdocwrite attribute.
With the pdocwrite is the partition on the Artemis written sector by sector from beginning so if the image is smaller it just doesn't overwrite the whole partition.

[rvbcrs]

The bepes file is shorter then 0x3900000, it is actualy only 0x3500000 long and thats why the process never ends.
So until bepe corrects the file you can change the command in the upgradeROM.bat
And if you want have control about the writing of the file to your phone change the command to "pdocwrite -v os.nb 0 0x3500000". The -v option shows you the actual status of writing.


Great find!

[carphead]

I did just that on my upgrade this morning and it worked perfectly. Made it much more stress free.

[orange]

i did it too on my CID LOCKED P3300 and everything was fine !!!
great Bios !!! much more faster !!

[RudydG]

i did it too on my CID LOCKED P3300 and everything was fine !!!
great Bios !!! much more faster !!

How do i know if my 3300 is "CID LOCKED"?

many thanks

[rvbcrs]

How do i know if my 3300 is "CID LOCKED"?

many thanks

Have you paid 28 euro's to the guys at http://www.imei-check.co.uk/ if not that your device is CID-LOCKED! paying money is the only way to get your device CID-unlocked at the moment..

[Pyth]

Have you paid 28 euro's to the guys at http://www.imei-check.co.uk/ if not that your device is CID-LOCKED! paying money is the only way to get your device CID-unlocked at the moment..

That's not true.. there are some devices that are CID-Unlocked from the factory. Some providers in some countries choose to not CID-Lock their devices. Unfortunately you can't check whether it is locked or unlocked..

I'm not going to try it just yet... haven't seen much Dutch T-Mobile Compact III WM6 Rom updates to convince me...

[jonboyuk]

Guys I really wanna make my mobile WM6 but no one's made any reports on the Orbit. I have a UK Orbit (CID locked I presume as I haven't done anything to it yet). Will it work on this device? Will it work without the CID unlock?

Thanks

Jon

[wadialdoor]

Guys I really wanna make my mobile WM6 but no one's made any reports on the Orbit. I have a UK Orbit (CID locked I presume as I haven't done anything to it yet). Will it work on this device? Will it work without the CID unlock?

Thanks

Jon

Someone here claiming it works with out CID Unlock

http://forum.xda-developers.com/showpost.php?p=1277913&postcount=97

I have o2 uk orbit with wm6 but i CID Unlocked before flashing with the wm6 rom

Its only £20 to get it unlocked and its worth it instad of risking your device and end up with a BRICK!

http://forum.xda-developers.com/showthread.php?t=308242

[Neozzz]

Someone here claiming it works with out CID Unlock

http://forum.xda-developers.com/showpost.php?p=1277913&postcount=97

I have o2 uk orbit with wm6 but i CID Unlocked before flashing with the wm6 rom

Its only £20 to get it unlocked and its worth it instad of risking your device and end up with a BRICK!

http://forum.xda-developers.com/showthread.php?t=308242


Well it's not that BIG of a problem, if you brick it, you'll probably be able to enter bootloader. And then you'll only have to wait till June for the official WM6 update rom from your provider. That's why I tried it, but I had bad luck, did all the precaution steps but still it failed. Happily, I can enter the bootloader, so only have to wait for WM6 retail... :)

[EazyVG]

Ok. I have flashed this ROM to my CID-Locked HTC P3300 and it is working nicely.

More info here. (http://eazyvg.wordpress.com/2007/05/23/running-wm6-on-htc-p3300-cid-locked/)

I got ONLY 38.5MB of free storage space, unlike around 42MB that I see in the screenshot on first page!!!!

P.S. Waiting for official HTC P3300 WM6 update, till then this one is cooooool.

[mongday]

How can I upgrade my Doopod P800W to Windows mobile 6. I would like tools for upgrade.

[mistral82cy]

Sorry guys to ask about this, but i am not quite sure about this, and i am not willing to risk breaking my phone.

I bought my Artemis directly through HTC, not a T-mobile or O2...
my artemis is CID Unlocked...

will this work on my phone?

the steps i have to make are those listed below?
install the 02 german rom
install the WWE version?

thanks,

and again sorry if i am requesting again something that was written before... ( i went through the thread, not quite sure though)

[paalkr]

Hi!

I uppgraded my HTC-P3300 NOR device with Bepe's WWE ROM, and everything went fine. :-)

Regards,
PK

[Stephen.Gazard]

I know I am being dumb .... but step by step .... how do I upgrade by unlocked O2 Orbit to the WM6 .....?

[wakke]

Ok. I have flashed this ROM to my CID-Locked HTC P3300 and it is working nicely.

More info here. (http://eazyvg.wordpress.com/2007/05/23/running-wm6-on-htc-p3300-cid-locked/)

I got ONLY 38.5MB of free storage space, unlike around 42MB that I see in the screenshot on first page!!!!

P.S. Waiting for official HTC P3300 WM6 update, till then this one is cooooool.



Can anybody confirm this?

I want to try it as well but I need my P3300 badly. So I don’t want to brick it and have to wait until the official ROM gets released in July…

[wakke]

Ok. I have flashed this ROM to my CID-Locked HTC P3300 and it is working nicely.

More info here. (http://eazyvg.wordpress.com/2007/05/23/running-wm6-on-htc-p3300-cid-locked/)

I got ONLY 38.5MB of free storage space, unlike around 42MB that I see in the screenshot on first page!!!!

P.S. Waiting for official HTC P3300 WM6 update, till then this one is cooooool.

I always get the following error after +- 10 minutes using your method:

Copying C:\DOCUME~1\BEBXAU~1\Desktop\P3300W~1\ARTE_W~1\its utils.dll to WCE:\wind
ows\itsutils.dll

3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 fd 25 02 08 13 1d 12 c3 10 08 06 53
CopyFileToTFFS(tom.nba:0, 0, 03900000)
ERROR: ITWriteDisk - An established connection was aborted by the software in your host machine.

* End Time
20:10:26,28
*
* Congratulation! (If there is no error message.)
* Finish upgrade

[rvbcrs]

I always get the following error after +- 10 minutes using your method:

Copying C:\DOCUME~1\BEBXAU~1\Desktop\P3300W~1\ARTE_W~1\its utils.dll to WCE:\wind
ows\itsutils.dll

3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 fd 25 02 08 13 1d 12 c3 10 08 06 53
CopyFileToTFFS(tom.nba:0, 0, 03900000)
ERROR: ITWriteDisk - An established connection was aborted by the software in your host machine.

* End Time
20:10:26,28
*
* Congratulation! (If there is no error message.)
* Finish upgrade


Change 03900000 to 03500000 in your batchfile! Then it works.. and leave your PC alone while flashing!

[wakke]

I always get the following error after +- 10 minutes using your method:

Copying C:\DOCUME~1\BEBXAU~1\Desktop\P3300W~1\ARTE_W~1\its utils.dll to WCE:\wind
ows\itsutils.dll

3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 fd 25 02 08 13 1d 12 c3 10 08 06 53
CopyFileToTFFS(tom.nba:0, 0, 03900000)
ERROR: ITWriteDisk - An established connection was aborted by the software in your host machine.

* End Time
20:10:26,28
*
* Congratulation! (If there is no error message.)
* Finish upgrade

I repeated the procedure on another computer -> same error

[EazyVG]

Hmmm .... all I can say is that this has worked already on 3 P3300 devices.

Try doing hard reset (with your original ROM) -> manage till today screen -> make sure you have an activesync connection established -> then run the batch file.

Apart from that I am clueless what is happening.

[almozaffar]

I got the same error everyone had, but I did the followings:
1-disbaled all background-running programms
2-dummped a shipped original Artemis ROM
3- when reached at Screen calibration, I didin't proceed with anything but plugged in my PPC with Activesync, then
4-upgraded as recommended in this thread

I got the WW6 running now like a chammp after several errors.

hope someone will get anyhelp frm my experience here.

TIA

[HaiLe512]

I loaded the bepe's wm6 os and it works GREAT!!!! I also load the cab to fix the SD problem as well. Things are running good. The ThemeMaster program I had never work right with WM5 before and it is now running...

Bepe, thanks...:D :D :D

P3300
2G mSD

[sandoval]

I found a small bug in WM6..

If you delete the dataconnection "The Internet", you wil see that it is no longer in the your connections tab. I you make a new connection, say t-mobile.. Programs as email will still try to connect to "The Internet" even if you set it to t-mobile.

If you then try to add the connection "The Internet" you will get a messagebox telling you that the connection allready exists..

[pirgas]

Hi
I manage to install WM6 on my cid locked Artemis following instructions posted by EasyVG. Thanks a lot.
I would like to ask if there is any way to increase free Program memory because after boot i have only 17.3 M free
I installed Spb Shell and Battery status
When i run some programs the free Program memory sometimes if below 10 M
I would like to ask also if i erase Extended memory, the free Program memory will be increased ?

Regards

John

[wakke]

Change 03900000 to 03500000 in your batchfile! Then it works.. and leave your PC alone while flashing!


I downloaded the arte.zip (ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip) file from the ftp and started from that one, and the upgrade now worked!

This is the full procedure (http://www.voipsec.eu/?p=92) I executed:

* Download Bepe’s WM6 English ROM (http://www.ramonshare.com/files/index.php?share=4&path=ROMS%2FHTC%20Artemis%2FWM6-By-Bepe%2FARTE_WWE_WM6.rar)
* Download the ARTE file (ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip).
* Extract the ARTE zipfile to a new folder
* Extract the WM6 English ROM to that directory and rename the file to windows.nb
* Make an ActiveSync connection
* Run UpgradeRom_Artemis.bat
* After around 25-30 mins hard reset your device (don’t worry if the installer looks to be hanging) and WM6 will boot

[rvbcrs]

I downloaded the arte.zip (ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip) file from the ftp and started from that one, and the upgrade now worked!

This is the full procedure (http://www.voipsec.eu/?p=92) I executed:

* Download Bepe’s WM6 English ROM
* Download the ARTE file.
* Extract the ARTE zipfile to a new folder
* Extract the WM6 English ROM to that directory and rename the file to windows.nb
* Make an ActiveSync connection
* Run UpgradeRom_Artemis.bat
* After around 25-30 mins hard reset your device (don’t worry if the installer looks to be hanging) and WM6 will boot

Thats why you have to change the value from 03900000 to 03500000 in the upgrade_rom.bat file so pdocwrite will finish properly..

[wakke]

Thats why you have to change the value from 03900000 to 03500000 in the upgrade_rom.bat file so pdocwrite will finish properly..

OK, thx for the tip

[mos33y]

Originally Posted by wakke
I downloaded the arte.zip file from the ftp and started from that one, and the upgrade now worked!

This is the full procedure I executed:

* Download Bepe’s WM6 English ROM
* Download the ARTE file.
* Extract the ARTE zipfile to a new folder
* Extract the WM6 English ROM to that directory and rename the file to windows.nb
* Make an ActiveSync connection
* Run UpgradeRom_Artemis.bat
* After around 25-30 mins hard reset your device (don’t worry if the installer looks to be hanging) and WM6 will boot

would it be the same procedure for the Orbit?

[clonepony]

Just bricked my T-mobile UK MDAC3, trying to restore to a dopod asia WM5 version. PS: cid-unlocked

[HaiLe512]

I loaded the WM6 fine. My radio version is 02.67.90 and protocol version is 4.1.13.28. How to get to the later versions?

Thks

[obionenairobi]

Originally Posted by wakke
I downloaded the arte.zip file from the ftp and started from that one, and the upgrade now worked!

This is the full procedure I executed:

* Download Bepe’s WM6 English ROM
* Download the ARTE file.
* Extract the ARTE zipfile to a new folder
* Extract the WM6 English ROM to that directory and rename the file to windows.nb
* Make an ActiveSync connection
* Run UpgradeRom_Artemis.bat
* After around 25-30 mins hard reset your device (don’t worry if the installer looks to be hanging) and WM6 will boot

would it be the same procedure for the Orbit?

in point 2 - Download the ARTE file do you mean the one from the german orbit site?

[obionenairobi]

oops, bricked my 3300

I found the arte.zip and ran the procedure as wakke described.
after 20 minutes I got a message that the upgrade was succesfull and hard reseted my artemis. after that I only got the black startup screen with all release numbers and that was it.
Currently I am restoring an WM5 rom through the bootloader

[obionenairobi]

so finally got my HTC 3300 back to the powermap ROM I was using before the attempted upgrade to WM6.... ooff.
I am however still temped to give it another go.

- are there any DUTCH MDA or HTC 3300 users that have succesfully upgraded to the WM6 rom?
- what procedure did you use? I have read through the entire thread and there are so many mentioned that I am a bit puzzled.

P.S. I have unlocked my MDA using IMEI-Check.co.uk so I guess I should normally be able to upgrade

cheers

[paalkr]

Hi!

On the screen dump in the second post there is an memory display saying a total of 48 MB internal storage. How do you obtain that amount? My device is reporting only approx 37 MB total internal storage. Is this controlled by the original ROM installed before flashing this WM6 WWE ROM?

Regards,
PK

[wakke]

in point 2 - Download the ARTE file do you mean the one from the german orbit site?

This one: arte.zip (ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip)

[aleksander100]

will it with qtek 2020i or o2xdaIIi

[phsnake]

aleksander100: dont even think about it. wont work. U'll brick ur device

[aleksander100]

okey nevermind i still try on my friends device and is it german or english

[EazyVG]

Perhaps someone can post the WM6 GER External_ROM here .... would be nice.

[Insane Devil]

Thanks a lot for this , Bepe!

This is working just superb on my HTC P3300 - Now i dont know if its unlocked or not, but i havent done anything towards unlocking it. So either its already unlocked, or this one doesnt need it.
I am so happy finally i got on WM6! thanks to u!

Only grouch (towards htc!), i still have only 37.xx mb of storage space, unlike some i see got 47.xx and in my cousin's Orbit (on wm5) has 52.xx mb of storage!

Bepe, and all, is there any tool to unlock this hidden memory somehow?

[paalkr]

Hi!

On the screen dump in the second post there is an memory display saying a total of 48 MB internal storage. How do you obtain that amount? My device is reporting only approx 37 MB total internal storage. Is this controlled by the original ROM installed before flashing this WM6 WWE ROM?

Regards,
PK

Any clues?

PK

[Dead Cell]

Hey guys,

Been away for awhile and just caught up on this thread. Seems quite a few people are having trouble installing this.

My MDA is CID unlocked so I was looking to give this a go.

Will try it when I get home tonight.

Just to double to check, all I need to do is download the Rom and install it as normal? Or are there any other steps which I need to follow?

Any help would be appreciated as always.

Regards.

[Dead Cell]

Guys where can I find the Artem Version that Jokker is on about and will it be a .nb file or an .exe file? If its a .nb file then how do I go about installing this?

Sorry to be a pain and thanks in advance.

Hallo to everyone Again ...
How I have wrote before, I had a problem with booting device after installing WWE, but now I found how to do it ...

1. Install T-Mobile original ROM
2. Install Artem version (wwe version) straight away ... don't install German version ...

Now everything working fine for me ...

Cheers ... :cool:

[sandoval]

O2 extended rom..

http://rapidshare.com/files/34372694/extended_rom.zip.html

[planeta]

Can anyone post here the rom link or send me the rom?
the old link are broken!
Thanks a lot, @

[@it]

Can anyone post here the rom link or send me the rom?
the old link are broken!
Thanks a lot, @

I have uploaded Bepe's WM6 to rapidshare.

http://rapidshare.com/files/34397941/ARTE_WWE_WM6.rar

@it

[@it]

On another note, tried upgrading to WM6 and now with a long story cut short, can only access the bootloader screen, what can I do from here?

cheers for the info ppl..

@it

[Ovenscrubber]

I got to this stage last night, very depressing.
But loaded real german o2 WM6, then soft restart and let it load with all its bits, then loaded Bepe's version (after renaming os.nb to windows.nb and after editing said file with the correct figures menyioned previously) and hey presto, now have english version of WM6 on a cid unlocked UK O2 Orbit.

[biou]

I did it, now i'm on wm6 with my M650. just one thing I do not knw how to get back french Orange Edge setting.

[planeta]

Mercy bocaup!
Danke viel mal!
Machas gracias!
Many thanks!!!

[cobalt78]

Hi

Is it a way to localize the WM6 ? link french .... :)

[CAVADIAS]

I had problems installing it on a xp system. With my friends vista it worked fine.

[planeta]

I have updated sucsessfull but after the reset it gets stuck at the boot screen.
any ideas?
maybe i have pressed the wrong reset keys for the p3300?
Please heelp...

[@it]

On another note, tried upgrading to WM6 and now with a long story cut short, can only access the bootloader screen, what can I do from here?

cheers for the info ppl..

@it

Have tried to do update through the bootloader screen, with the German Rom gets to 3% and restarts. Looking for some advice or help.

PLEASE, PLEASE, PLEASE.....

@it

[planeta]

Have tried to do update through the bootloader screen, with the German Rom gets to 3% and restarts. Looking for some advice or help.

PLEASE, PLEASE, PLEASE.....

@it

Hello, can you send me a copy from your german ROM?
After the WM6 update cant more boot, allway stay in the boot logo from HTC.

[Dead Cell]

Guys does anybody here know how I can install OS.nb by itself, or how I can repack it into an .exe file so that I can install it?

[@it]

Hello, can you send me a copy from your german ROM?
After the WM6 update cant more boot, allway stay in the boot logo from HTC.

Can I ask why, trying to get mine working.

@it

[planeta]

Can I ask why, trying to get mine working.

@it

Because the only posibility to resore my phone are with the shipped german rom and i dont find a copy for download.
I think you have the same problem, after you update wm6, the phone restart und stay in the boot log.
I see that many pepople have the same problem, the cause is that before you can update to wm6, you must unlock the CID (Country ID) from your phone, otherwise the phone stay after the update and you can only savage with the original rom and original language.
If you have a HTC German ROM please send me a copy, my phone are dead whitout these ROM.
Thank you and greets from Liechtenstein.

[@it]

The only german rom I have is the o2 WM6 released recently and available here : http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html

Does anyone have or know how I can restore the original rom o2 orbit UK, I think I may be CID Locked. Or should I send it back to o2

Cheers and many thanks...

@it

[Neozzz]

The only german rom I have is the o2 WM6 released recently and available here : http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html

Does anyone have or know how I can restore the original rom o2 orbit UK, I think I may be CID Locked. Or should I send it back to o2

Cheers and many thanks...

@it

If I were you I shouldn't send it to O2, tomorrow it's June :) ! That means HTC and other providers are gonna release their official WM6.

[@it]

If I were you I shouldn't send it to O2, tomorrow it's June :) ! That means HTC and other providers are gonna release their official WM6.

OK, cheers will the official WM6 update from bootloader and CID Locked?

Cheers for the info...

@it

[Spamkit]

Hello all,

let me tell my story. I hope it will save somebody some hours and much of headache.

Today I've got O2 Orbit XDA. Since I'm not a German myself German language is a little bit too complex for me, so I've decided to upgrade to bape's (vivat respect!) WWE (World Wide English when somebody doesn't know it already).

First I've tried to download ARTE (ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip) and bape's WWE pack and install it like it was described in the topic. Result: after around 10 minutes ARTE responded with an error, nice O2 boot screen comes with versions and it stays stuck like a bad dream mountain ;-).

To push it back I've used O2 german WM6 via bootloader (hold voice, gently press and hold reset until your screen don't become dark, then release reset and keep holding voice button until you see multi colored lanes on a display) available from their website. Now I'm happy: my device got back working. Reanimated as well. But I'm didn't got smallest step forward. Well... Let's begin to search topic more preciously.

Here i did got a trick with OMAPClock. Result: ARTE fails with error, standing mountain comes back laughing like my try was a loss. Nevermind. Can happen.

Next thing I've tried OMAPClock and ARTE got started during display crossbar calibration. Result: mountain is still here. As russian's say: the clever one will not go up into the mountain way - he will bypass it from the side.

Next one important detail grabbed from the topic: not really correct image size specified in UpgradeRom.bat (ARTE package). Well... It's becoming fixed by replace original call to pdocwrite (line 51) with this one:

pdocwrite.exe -v windows.nb 0 0x3500000

"-v" (hello UNIX ;-)) has an advantage of verbosing (v like verbose) and shilding write process pretty clever. Result: write breaks near 0x34a0000. Hell! It was really like thunderstruck from pure heaven ;-).

Sometime later I noticed: it stopped writing at the same time display got darker. What could be the problem here? Well, timeouts? Get it one try more! Yes! 10 minutes after last touch my Orbit pushes itself into the sleep of galaxies (standby!) So the final approachment was to touch some controls (like touching display or trackball in the middle) every 20-30 seconds in order not to let it go into the deep sleep. This time everything worked as expected.

Now the final guide:

1. Download and extract ARTE pack.
2. Fix pdocwrite call in UpdateRom.bat (line 51) to: pdocwrite.exe -v windows.nb 0 0x3500000
3. Extract bope WWE pack into the directory you've extracted ARTE and rename bape's file into windows.nb.
4. Now you can install OMAPClock and set the frequency to 228 mHz.
5. Start Windows Exporer and let it start UpdateRom.bat (double click).
6. Every 20-30 seconds just slightly touch a display in the shortcut free area or play a deck football with trackball.
7. After 10-15 minutes you should be done. Now reset your device simply and wait for 2-3 minutes for WM6 boot. Prepare here to be fast enough to press reset once more.
8. Now you can learn how not to leave your visit to dentist and talk to Mother Clara. When you become to see the desktop and message that your PDA will begin with installing customization packs - press reset. It is better not to mix "adult male chicken" and the dog. Voila! Here you've passed the mountain by side.

Some need-to-know:
1. O2 XDA Orbit purchased in Germany look like not to be CID locked. When somebody will tell me how do I check that - I'll do.
2. You cannot use original HTC Artemis firmware - it will begin to install and will stop at 10% telling you, your model is not corrent.
3. My try to create NBHTool package brought also nothing. Netiher HTC Artemis nor NBHTool homebrew moonshine will do the trick.
4. Homebrew package listed somewhere in this forum did not work for my device too.

Be happy with your device.

P.S. Some question (not related to this bible): phone software (dial pad, call journal, SMS and contact lists) provided with bape's package seems not to be right comfortable. What do you use?

[Sebi]

Hello all,

let me tell my story. I hope it will save somebody some hours and much of headache.

Today I've got O2 Orbit XDA. Since I'm not a German myself German language is a little bit too complex for me, so I've decided to upgrade to bape's (vivat respect!) WWE (World Wide English when somebody doesn't know it already).

First I've tried to download ARTE (ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/arte.zip) and bape's WWE pack and install it like it was described in the topic. Result: after around 10 minutes ARTE responded with an error, nice O2 boot screen comes with versions and it stays stuck like a bad dream mountain ;-).

To push it back I've used O2 german WM6 via bootloader (hold voice, gently press and hold reset until your screen don't become dark, then release reset and keep holding voice button until you see multi colored lanes on a display) available from their website. Now I'm happy: my device got back working. Reanimated as well. But I'm didn't got smallest step forward. Well... Let's begin to search topic more preciously.

Here i did got a trick with OMAPClock. Result: ARTE fails with error, standing mountain comes back laughing like my try was a loss. Nevermind. Can happen.

Next thing I've tried OMAPClock and ARTE got started during display crossbar calibration. Result: mountain is still here. As russian's say: the clever one will not go up into the mountain way - he will bypass it from the side.

Next one important detail grabbed from the topic: not really correct image size specified in UpgradeRom.bat (ARTE package). Well... It's becoming fixed by replace original call to pdocwrite (line 51) with this one:

pdocwrite.exe -v windows.nb 0 0x3500000

"-v" (hello UNIX ;-)) has an advantage of verbosing (v like verbose) and shilding write process pretty clever. Result: write breaks near 0x34a0000. Hell! It was really like thunderstruck from pure heaven ;-).

Sometime later I noticed: it stopped writing at the same time display got darker. What could be the problem here? Well, timeouts? Get it one try more! Yes! 10 minutes after last touch my Orbit pushes itself into the sleep of galaxies (standby!) So the final approachment was to touch some controls (like touching display or trackball in the middle) every 20-30 seconds in order not to let it go into the deep sleep. This time everything worked as expected.

Now the final guide:

1. Download and extract ARTE pack.
2. Fix pdocwrite call in UpdateRom.bat (line 51) to: pdocwrite.exe -v windows.nb 0 0x3500000
3. Extract bope WWE pack into the directory you've extracted ARTE and rename bape's file into windows.nb.
4. Now you can install OMAPClock and set the frequency to 228 mHz.
5. Start Windows Exporer and let it start UpdateRom.bat (double click).
6. Every 20-30 seconds just slightly touch a display in the shortcut free area or play a deck football with trackball.
7. After 10-15 minutes you should be done. Now reset your device simply and wait for 2-3 minutes for WM6 boot. Prepare here to be fast enough to press reset once more.
8. Now you can learn how not to leave your visit to dentist and talk to Mother Clara. When you become to see the desktop and message that your PDA will begin with installing customization packs - press reset. It is better not to mix "adult male chicken" and the dog. Voila! Here you've passed the mountain by side.

Some need-to-know:
1. O2 XDA Orbit purchased in Germany look like not to be CID locked. When somebody will tell me how do I check that - I'll do.
2. You cannot use original HTC Artemis firmware - it will begin to install and will stop at 10% telling you, your model is not corrent.
3. My try to create NBHTool package brought also nothing. Netiher HTC Artemis nor NBHTool homebrew moonshine will do the trick.
4. Homebrew package listed somewhere in this forum did not work for my device too.

Be happy with your device.

P.S. Some question (not related to this bible): phone software (dial pad, call journal, SMS and contact lists) provided with bape's package seems not to be right comfortable. What do you use?

It works on my T-mobile MDA Compact III! But
"7. After 10-15 minutes you should be done. Now reset your device simply and wait for 2-3 minutes for WM6 boot. Prepare here to be fast enough to press reset once more." DON'T SOFT RESET, MAKE HARD RESET.

THX SPAMKIT!!!!

[delta146]

I followed the guide to flashing my o2 UK purchased phone, and it ran like a dream first time. Thank you.

I have however since found that WM6 will not sync with a Mac computer.:eek:

Before you flash your phone ensure you backup all your contacts, calendar etc to a PC. This will make restoring your valuable data a more siple process.:)

[lewman]

I followed the guide to flashing my o2 UK purchased phone, and it ran like a dream first time. Thank you.

I have however since found that WM6 will not sync with a Mac computer.:eek:

Before you flash your phone ensure you backup all your contacts, calendar etc to a PC. This will make restoring your valuable data a more siple process.:)

Worked for me too! I followed the guide a few pages back; flashing with the German ROM and then ARTE Bape's ROM. After a hard reset it got stuck on the o2 Splash screen with the version numbers.

SO at 4am this morning (and reading spamkits VERY helpful post) I reflashed the unit with the German ROM. When in WM6 I stuck on the OMAPClock program and set the clock speed. Reinstalled ARTE Bape's ROM and it worked first time!

Love the new WM6! Much faster and nicer looking.

BTW for all you o2 Orbit users who do the upgrade remember to re-download the 02 plugins from here -
http://forum.xda-developers.com/showthread.php?t=299567&highlight=o2+today+plugin

You will of course need to re-enter your MMS and GPRS settings too.
-Lew

[resita]

Hi there,

I've been following this thread from the begining, as I am more than interested in having WM6 working on my Artemis.

The first step(installing the German version) is accomplished, than I followed the instructions given by Spamkit. Every time I get the same error and the connection between ActiveSync and Artemis is lost.

Any suggestion is more than welcomed (although I'm living in Netherlands, my German knowledge is closed to Chinese :)... )

Thank you !
M.

[resita]

Just made it working :)....

The only thing I did is that I did not go through the first time initialization routines of the german firmware(screen calibration, a.s.o.).

To add here, the last 10Kb package transferred to the device ended up at the address 0x34F0000 (In this way you know for sure when UpgradeRom.bat finishes).

So the procedure is now:

1. Download & Install the german WM6:
http://www.o2online.de/nw/support/do...bit/index.html
!!!Do not perform any initialization, but connect it to a desktop computer
2. Download the ARTE (english) related files
http://rs91.rapidshare.com/files/32826418/orbit_WM6.rar
2. Fix pdocwrite call in UpdateRom.bat (line 51) to: pdocwrite.exe -v windows.nb 0 0x3500000
4. Start UpdateRom.bat
7. It is done when the last address written is 0x34F0000 (watch the DOS box)

[babak_73]

Just made it working :)....

The only thing I did is that I did not go through the first time initialization routines of the german firmware(screen calibration, a.s.o.).

To add here, the last 10Kb package transferred to the device ended up at the address 0x34F0000 (In this way you know for sure when UpgradeRom.bat finishes).

So the procedure is now:

1. Download & Install the german WM6:
http://www.o2online.de/nw/support/do...bit/index.html
!!!Do not perform any initialization, but connect it to a desktop computer
2. Download the ARTE (english) related files
http://rs91.rapidshare.com/files/32826418/orbit_WM6.rar
2. Fix pdocwrite call in UpdateRom.bat (line 51) to: pdocwrite.exe -v windows.nb 0 0x3500000
4. Start UpdateRom.bat
7. It is done when the last address written is 0x34F0000 (watch the DOS box)

I did install wm6 on my dutch mda comact 3. Thanx for the instruction. For people with dutch rom just remember to soft reset immediately after each hard reset to prevent installing customazation packages, otherwise you brick your artemis. Good luck!

[Dead Cell]

What does this mean?

Die von Ihnen gewählte Seite existiert leider nicht (mehr)Mögliche Erklärungen
Haben Sie die Adresse selbst in Ihren Browser eingegeben? Bitte überprüfen Sie Ihre Eingabe, um sicherzustellen, dass sie korrekt ist.
Sie haben eines Ihrer Bookmarks aufgerufen? Manchmal ändern sich die Adressen innerhalb von Websites wenn Änderungen inhaltlicher oder optischer Natur vorgenommen werden. Die alten Adressen sind dann nicht mehr erreichbar.
Sie haben ein Suchmaschinenergebnis angeklickt? Auch Suchmaschinen sind nicht immer aktuell – oft finden sich noch alte Seiten in den Suchmaschinen, die gar nicht mehr existieren
Vorgehensweise
Von der Startseite ausgehend können Sie komfortabel in alle Bereiche navigieren. Nutzen Sie hierzu einfach die obenstehende Navigation oder falls Sie etwas ganz Bestimmtes suchen, geben Sie den Begriff in die Volltextsuche ein.
Kontakt
Sollten weiterhin Probleme auftreten, freuen wir uns, wenn Sie mit uns Kontakt aufnehmen und das Problem beschreiben. Sie helfen uns damit die Seite weiter zu optimieren.
Kontakt

[kidkoala_uk]

In case people come across this and are unsure what to do I flashed my cid-locked MDA compact III with this rom with no problems at all these are my instructions.

1, Download the ARTE (ftp://xda:xda@ftp.xda-developers.com...temis/arte.zip) file.
2, Hard Reset your device (2 soft keys and reset button) once it boots back up reset just as its about to run the customization scripts.
3, ONce you have it restarted again copy the EnableRapi.cab from the ARTE zip and install it on your device do a soft reset (stick the stylus in the little whole on the lower left)
4, once it comes up again attach USB cable and ensure Active Sync has connected properly
5, copy the OS.nb file to the ARTE folder and rename it to windows.nb
6, Run the UpgradeRom.bat this will start to flash your device it will probably hang so after 30minutes unplug the cable and give it another hard reset.
7, Your device is now WM6 WWE

Hope this helps sorry if the info has been posted allready but i like step by steps and i hope somebody finds it usefull.

Of Course I take no responsibility if this method doesnt work for you but it worked fine for me.

Cheers and good luck
loxs


Perfect loxs worked a treat on my CID locked T-Mobile mdaIII. Thanks bepe for the rom :)

[pklein90]

@deadcell

the site dosent exist anymore, "deeplink" try from the mainpage on.

here is the correct link http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
Cu

[mital]

For all those previous posts from UK O2 users, I've confirmed that this does work on CID unlocked UK Orbit.
At first I bricked my phone but that was because I hadn't first installed the German ROM.

So (I know it's been said a few times before now):

1. CID Unlock your phone via IMEI-Check
2. Download and Flash GERMAN ROM from O2 Germany.
3. Download ARTE WWE WM6 ROM and ARTE utility. Extract os.nb from rar file and extract arte.zip. Copy os.nb into extracted arte folder and rename to windows.nb
3. With phone connected via USB At the calibrate your screen page, run UpgradeRom.bat.
4. After upgraderom.bat has finished, hard reset your phone (2 soft keys + reset button via stylus).

Hey presto it's done :)
I now have a UK orbit with WM6 on it.

Confirmed TomTom, SPB PocketPlus, SPB Mobile Shell and SPB Backup all work fine. I even restored my contacts, email and text messages to WM6 from a backup I made in WM5. Now if only I could get messenger to display all my contacts instead of randomly selected ones!

[babak_73]

I did install wm6 on my dutch mda comact 3. Thanx for the instruction. For people with dutch rom just remember to soft reset immediately after each hard reset to prevent installing customazation packages, otherwise you brick your artemis. Good luck!


Just to add that my MDA compact III is CID locked. SO you really don't have to unlock it. Just remember about those immedate soft-resets after each hard-reset. Good luck, Babak

[ADB100]

Would it be possible for someone to post the Enterprise files from this ROM? The four directories Zipped up would be nice, however just the files 'ipsec.dll, ipsecsvc.dll, l2tp.dll, scard.dll & winscard.dll' should be OK.

I am having a real issue getting L2TP/IPSec working with my Wizard running ROM 5.2.1413 and have been trying other Enterprise files to see if I can get it going.

Thanks

Andy

[smartphone.net.pl]

One important (for me obviously :-)) question: does original german O2 ROM have built-in SIP client?
As far i know operators - probably not :-(

[StevenAFC]

When installing the German rom i get ERROR [244] : INVALID MODEL ID

[tamAyT]

Hi all,

After succesfully installed wm6 on my cid locked device I decided to unlock my cid with imei. After that i decided to install wm6 again but now by installing the O2 german version first and then the wwe version (so yes, first time i didn't use O2 upgrade because of my cid locked device).

Before I began i made a full backup using sprite software for all my installed applications. So after the upgrade I restored my backup and saw 1 big difference: I suddenly have 30.7 MB free storage space and before I had 20 MB free storage space. The fun part is that all my applications are working.

How is this possible? And 1 other thing...I get an error message whenever I want to add a new contact but editing existing contacts i don't get an error message. So I cannot add new contacts.

Furthermore...is it possible to replace the O2 startup screen with the htc one?

[Kari1988]

ERROR: ITWriteDisk - An established connection was aborted by the software in your host machine.
help:(

[pm007]

ERROR: ITWriteDisk - An established connection was aborted by the software in your host machine.
help:(

Try to change windows.nb size in Artemis_upgrade.bat from 3900000 to 3500000, i tried and had a sucsessfull flashing

[Kari1988]

Try to change windows.nb size in Artemis_upgrade.bat from 3900000 to 3500000, i tried and had a sucsessfull flashing
I have tested but it doesn't work:(

[Kari1988]

Try to change windows.nb size in Artemis_upgrade.bat from 3900000 to 3500000, i tried and had a sucsessfull flashing
it writes the same thing

:(

[t_dushman]

Hi Guy's, succesfully upgraded my HTC P3300(CID UNLOCKED) to wm6 wwe, only worked after i installed the O2 rom first. Works great.

thx, keep up the good work.

t_dushman

[Pelhamgw]

Hi,
My usb connection died halfway through the upgrade and now I am stuck at bootloader. How can I create an nbh file from the nb file to load the OS using an SD card?

Thanks,
pelhamgw

[mongday]

Thank you for this rom..
I upgraded my Dopod P800W, so it work very well. And I did download HTC Audiomanager from this site it work too.

[Pocha]

@ pelhamgw you must format first your SD card in FAT32, then put your ROM (only file called *.nbh) into SD card, and finally rename this file to ARTEIMG.nbh, then reboot and automatically ROM will be installed, but do to this, you must have first your Original ROM !!!

[Paladin13]

####

message edited

PDAMobiz ver works fine for me!

[itschase]

:).........................

[manples]

Hi guys,

I've an Orbit UK (CID Unlocked) flashed by imeicheck with last T-Mobile Rom (1.28)

I've read the entire topic but I still not understand what I must do to update it properly... Wich files exactly should I use and what steps should I follow ?

Thx for your help guys,

[martin.eu]

GPRS/EDGE indicator (G/E) in this ROM version is still indicating that there is only GPRS available. Is it only problem with the indicator or this version of ROM doesn't support EDGE ?

[Pelhamgw]

Hi Pocha,

Thanks for responding. Unfortunately I don't have the original ROM and tried the ROMs available on the forum. The Device ID is ARTE110. When I use the .nbh files, the bootloader starts by "Checking SD Contents" and then goes to the bootloader screen (Red Green Blue White). Where can i get a working ROM for the ARTE110?

Thanks,
pelhamgw

[rvbcrs]

Hi Pocha,

Thanks for responding. Unfortunately I don't have the original ROM and tried the ROMs available on the forum. The Device ID is ARTE110. When I use the .nbh files, the bootloader starts by "Checking SD Contents" and then goes to the bootloader screen (Red Green Blue White). Where can i get a working ROM for the ARTE110?

Thanks,
pelhamgw

Did you format the SD Card first? When you do not format the card first you can get this problem that it will skip directly to the bootloader.

Try to format the SD Card put only the ARTEIMG.nbh file on it and try again. Also make sure your phone is CID-Unlocked.

[Pocha]

In order to make a flash from SD your SD must be formated in FAT32 if you for