PDA

View Full Version : How I did my ROM upgrade to WM6 PDAVIET

llapao
25th May 2007, 01:59 AM
After reading and made some big mistakes I've found this process:

Its very simple, around 1h job. : P

If you can access to the bootloader (press camera, use stylus and press reset, release reset) and you see your original IPL/SPL everything is ok. (you can now take a deep breath)

Reboot your PC. In bootloader mode connect USB cable to Prophet and PC. ActiveSynk will not give you any response.

I used the file RUU_Prophet_220734_2207114_024721_NVID_QTEK.exe dowloaded from xda-developers ftp while the Prophet was in bootloader mode and connected via USB to computer. (I just cant find it to give you the link, but let me know if you need it)

you just have to click next [a la windows...]

You should hard reset your Prophet (camera + commmanager key, use stylus and press reset, release reset, click call button when asked)

You should be able to use ActiveSynk now!

After that I installed the Cert_SPCS.cab and EnableRapi.cab, no reset was needed.

Then installed the Prophet_4.0.0.0.1_PV rom by running Upgrade_ROM.bat from the computer. ( http://forum.xda-developers.com/showthread.php?t=308266
)

Done with success!!!!

Hope this helps... Let me know if it did ; )

Luis


Note: so far so good, no bugs/flicks, everything seems to work like it should. A very very nice work from PDAVIET crew
uk19xx
25th May 2007, 07:52 AM
active sync seam not working ??

i'm using version 4.5?
llapao
25th May 2007, 03:24 PM
active sync seam not working ??

i'm using version 4.5?

Just follow the procedures and you will have everything working. Don't know exactly what is 4.5, but nevertheless beware that in bootloader mode activesynk will not give you any response.
namco
25th May 2007, 04:19 PM
When in bootloader mode (the known tri-color screen), ActiveSync doesn't recognize the device. This is a normal behaviour.

4.5 is the latest ActiveSync version, BTW.

After that I installed the Cert_SPCS.cab and EnableRapi.cab, no reset was needed.

Then installed the Prophet_4.0.0.0.1_PV rom by running Upgrade_ROM.bat from the computer. ( http://forum.xda-developers.com/showthread.php?t=308266
)

You don't need to install those CABs prior to upgrading to the WM6 rom. The UPGRADE_ROM.BAT file does that for you. Edit it and check for yourself ;)