Error when install new rom....

[kayzee]

Hello....
I am using SPL 1.20.Olipro and the rom is 20070519_LVSW_Trinity_WM6_v2.0.0.7
When I want to update new rom....Its doesn't work....
Whenever which rom (mUn's version or LVSW's rom)

Pic 1 is the error message
Pic 2 is my phone turned to this screen
http://hk.geocities.com/crazy_kkkkk/error1.jpg
http://hk.geocities.com/crazy_kkkkk/error2.jpg

Can someone can teach me how to fix this problem!!????
THANKS so much!!

My English is poor...Sorry

[vinci59]

hi,when you have this error message you must try again and the Rom update works. I've already had this problem
salut,quand tu as un message d'erreur relance immédiatemment ta rom update et ça doit passer. J'ai déjà eu ce souci

[kayzee]

New error........

[ilmanu]

when the phone come to bootloader screen restart update utility, if don't work use hardspl....

[vimafeje]

hi,

have you unlock CID?

[Supergeert]

Hi,

I got the same problem, exactly the same error when i want to flash lvsw rom.
1. I superCID it (twice)
2. I updated using hard-SPL but everytime i get the same error code: 246 device not responding.

I tried reconnecting, resetting, with and without sim, but it all doesn't seem to work.
When I downloaded a shipped rom with GPS enabled, all went well...
Is there some kind of trick involved, or does it just not work for my p3600?

Thanx in advance,

Geert
--------------------------------------------------------------------------------------
@ kayzee

if you start hard-SPL and it opens the hard-SPL window, before you click next etc. open up lvsw rom updater and click next etc. in the lvsw updater.
I guess your Trinity thinks its hard-SPL but in fact ur flashing lvsw rom on ur Trinity

[YYYYY]

edit: please delete this message

[ilmanu]

Hi,

I got the same problem, exactly the same error when i want to flash lvsw rom.
1. I superCID it (twice)
2. I updated using hard-SPL but everytime i get the same error code: 246 device not responding.

I tried reconnecting, resetting, with and without sim, but it all doesn't seem to work.
When I downloaded a shipped rom with GPS enabled, all went well...
Is there some kind of trick involved, or does it just not work for my p3600?

Thanx in advance,

Geert
--------------------------------------------------------------------------------------
@ kayzee

if you start hard-SPL and it opens the hard-SPL window, before you click next etc. open up lvsw rom updater and click next etc. in the lvsw updater.
I guess your Trinity thinks its hard-SPL but in fact ur flashing lvsw rom on ur Trinity

same problem same procedure:;

when the first flash fail click exit and (w/o do anything) restart ruUpdate.exe or before do the update push and hold camera button and do a soft reset (holding camera button) when the phon is in "3 colors mode" start the update

[peterpanuk2000]

The way it worked for me was to flash it while it was up and running as the software send's you into bootloader mode and then let's you flash ok. This way works for me.

[moha_med]

I have problem!

After rom upgrade for cid unlock, the process stoped at 80% then phone now is freeze!
When i try to start up it it freeze on sfr logos! I've tried several times to repeat process rom upgrade for cid unlock but soft start qo at 7% an phone restart and same thing with original rom or sfr rom. Nothing to do it's died!

Please help me

[racerx_]

have you tried to flash hard spl to your phone first? then try to flash another rom.


if not, follow the instructions here (http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=60)to use splxploit, then flash hard spl, then another rom

[Hockert]

That didn't work for me. Does anyone know what to do yet?

[lion5877]

Hi,
I have the same problem.
I have followed the indication of this forum:

http://forum.xda-developers.com/showthread.php?t=293957

1. Transfer SSPL/SSPL-TRIN.exe to your phone and run it
2. Tri-color screen will appear
3. Disable activesync (file -> connection settings -> uncheck "allow USB connections")
4. Connect your phone to your computer using the USB lead.
5. Run RUU/ROMUpgradeUtility.exe
6. Follow the flashing process (Check the "I understand..." and "I completed..." boxes and update!)
7. Allow your phone to reboot.
8. Transfer TRIN_Unlock_v1.exe program to your phone and run it
9. Click the Unlock Button, select unlock option. Select if you want SIM/CID unlock.
10. Click "Unlock!" and wait until process finishes.
11. When done, turn off your phone for 10 seconds and reboot after that.


I hope of to have been useful, I have resolved therefore
d.

[checcototti]

Sorry for bothering you,

I had a problem while flashing a Rom. Now my trinity is dead. It only appears the "HTC smart mobility", symbol with some red little numbers at the bottom of the page.
Is there something I still can do my self or should I run to service assistance?
Obviously it doesn't connect to active sync.

Please just give me a hint....:(

[samov]

Download the official locked ROM

Put the trin in bootloader mode manually... Flash... now the phone is locked again... supercid it again... then try again with hard spl

[checcototti]

Download the official locked ROM

I've already downloaded the official WM5.


Put the trin in bootloader mode manually...

Please, I don't know how to do this operation. My PDA looks dead.



Flash... now the phone is locked again...

Ok, I think I know how to do this
.

supercid it again...

Supercid? Sorry, what does it mean?

then try again with hard spl

Please could you tell me how to do this?

Probably not very used to this operations, so please try to explain in a more explicit way.
Thank you so much for your kind assistance.

[racerx_]

you really should read more before you try to flash..

the wiki defines all of these terms that you aren't understanding.


manually place in bootloader by holding power button + camera button + soft reset.

You can download hard-spl(makes phone look like CID unlocked, does not void warranty and allows you to flash unsigned ROMs) in Trinity Upgrading forum, and also SuperCID tool (unlocks your phone to use ROMs from any carrier, but voids warranty). SuperCID is unnecessary in my opinion

please follow the upgrade guides on my site if you're confused. For now, Place your device in bootloader, and flash hard-spl, then the ROM of your choice. Follow the hard-spl guide on my site for details and download links.

hope it helps

[checcototti]

you really should read more before you try to flash..


You're right. Now I know.

manually place in bootloader by holding power button + camera button + soft reset.


Done.

You can download hard-spl(makes phone look like CID unlocked, does not void warranty and allows you to flash unsigned ROMs)


Done. I've downloaded the DES Crash Proof Spl.

please follow the upgrade guides on my site if you're confused.


I've followed the instructions here
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66

But I still have a doubt. Because it says "Make sure the activesync icon is be green (finished synchronizing)" . But as I've already said, it seems that my pda doesn't connect at all.

Please, help me. probably I'm close to the solution. Sorry for bothering you!

[checcototti]

Anyway I've tried the following:

Downloaded the DES CRASH PROOF SPL.
Connected my Trinity to my pc.
The active sync doesn't extablish a connection. No green light.
Put the PDA in bootloader mode manually
run the spl
After a few clicks, the program on the pc says: ERROR [270] The image file is corrupted. Please check your update utility.

:confused:

[checcototti]

I tried to flash the official WM5 and now it's ok. It works fine with it. Can I try again to flash the unofficial WM6 rom from the forum now?

thanx !

[dta1974]

I don't know how to explain it,because my english and knowledge about these sort of things is really low,but I can tell you guys to take a look at www.trinityguides.info (and say thanks to racerx for his great job and helpful website)you can find some ideas to those issues.

Later.

[Svenitos]

have you tried to flash hard spl to your phone first? then try to flash another rom.


if not, follow the instructions here (http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=60)to use splxploit, then flash hard spl, then another rom

Thanks, worked for me! I just used splxploit and then flashed a rom (didn't had to flash hard spl).