Does SDHC work after WM6 update?

[geezer78]

Hi guys,

I need to get a bigger microsd card, but i would very much like to buy (and use) the new sandisk 4gb micro SDHC. I read in another (http://forum.xda-developers.com/showthread.php?t=294648) thread that it might work after WM6 upgrade...

i've also read this (http://www.bsquare.com/about/story.asp?PressID=451) press release stating that new drivers are available also for the omap850...

Can someone confirm wether or not a 4gb micro SDHC works after the WM6 upgrade?

thanks!

[phsnake]

no, wont work. there is different sd-reader HW. You are asking questions like if i can play DVDs on my CDplayer after firmware upgrade. NO IT WONT.

[geezer78]

no, wont work. there is different sd-reader HW. You are asking questions like if i can play DVDs on my CDplayer after firmware upgrade. NO IT WONT.
I don't think you've read the pages i linked to. The first is a thread here on xda-dev. where someone tells us that the upgrade to WM6 brought sdhc to the trinity... so that would tell us it is not a hardware thing.

the second link tells us about a softwarestack to bring sdhc to (among others) Omap850 ... so that's why i would like to know if someone that has actual hands on experience with the combination WM6 & sdhc cards could tell us if it works, instead of someone just bloating without looking.

[esackbauer]

so that would tell us it is not a hardware thing.


Regarding Trinity: The Software upgrade also brought GPS to Trinity. So GPS is only a software thing??

I guess Trinity has already SDHC compatible HW chip inside, just the SDHC drivers were missing.

[nemo8]

2esackbauer
Well, and why do you think Artemis has no SDHC compatible chip inside? Are you an insider? Recall please,
HTC has not ever declared the fact that Trinity has got SDHC compatible chip inside, either. Moreover, Trinity can not work yet with SDHC cards running officially issued ROMs installed.

[phsnake]

as far as i understand, they are speaking about drivers for CPU beccause as i know OMAP, Marvele.... are CPU's. So it means that those drivers will be able to communicate with CPUs mentioned in that article and SDHC hw. Still we are on the same point, if U have cd player it wont read DVDs. Other thing is if Trinity has SDHC hw. but i dont believe so. It will be unreasonable expensive for htc to built it. You can argue that Ericcsson T10 and T18 were the same except for active flip and vibrations, but the reasson then, was in amount t10 and t18 sold(or expected) and price of changing or making another line. I could believe it in case that htc already presented Arte lookalike with SDHC supp. but in this case i simply dont. BTW as i remember, Trinity was presented in betas with GPS, and when it was launched it was widely known that it has GPS chip+antena, but they launch it without drivers because there were some troubles with comm between drivers and chip and OS, and it will be too expensive to delay launch of trinity even if it was w/o GPS

esackbauer: in this case was GPS only SW prob. (btw i like beer too)
nemo8: do you think that if you can enable SDHC only by new drivers, here will be numbers of those drivers in beta versions for downld?With 10-50%functionality? For ex. at least using those drvrs u would be able to read directory tree? i believe that yes.
HTC has not ever declared the fact that Trinity has got SDHC compatible chip inside, either. - i dont have trinity but can U give me link where u found out that it has SDHC hw? DOes it have SDHC supp on cooked ROMS?

[smartphone.net.pl]

From wikipedia:

A new SD format, SDHC (Secure Digital High Capacity), allows capacities in excess of 2GB (4GB to 32GB)[10]. SDHC uses the FAT32 file system which supports the higher capacity instead of FAT16[11]. It uses the same form factor as SD, but the SD 2.0 standard in SDHC uses a different memory addressing method (sector addressing vs byte addressing[12]). SDHC cards only work in SDHC compatible devices, but standard SD cards work in both SD and SDHC devices. The SDHC trademark is licensed to ensure compatibility.[13]

All changes are in logical access. According to this, driver change could allow to use SDHC card in devices.

[nemo8]

DOes it have SDHC supp on cooked ROMS?[/QUOTE]
Yes, it does have SDHC support on WM6 ROMs cooked by two talented ROM-creators, whoose nick-names are mun and lvsw. I have seen it with my own eyes(it worked successfully with 4G miniSDHC). And therefore I hope p3300 also would be able to support this card format running WM6 OS. The new driver might have been included into officially issued WM6 ROM. We just need someone to check that.

[mavericke]

DOes it have SDHC supp on cooked ROMS?
Yes, it does have SDHC support on WM6 ROMs cooked by two talented ROM-creators, whoose nick-names are mun and lvsw. I have seen it with my own eyes(it worked successfully with 4G miniSDHC). And therefore I hope p3300 also would be able to support this card format running WM6 OS. The new driver might have been included into officially issued WM6 ROM. We just need someone to check that.[/QUOTE]
Marvellous! In that case I would have to try it out on my XDA Orbit then. Just waiting for the 4GB SDHC to arrive. FIngers crossed.

[phsnake]

OK then i appologise, it will be perfect to have sdhc supp on artemis (if u check size of W-Euro map for tomtom - some 850mb) it will be marvelous. I never heard of making sd devices working with sdhc, but if you've seen trinity working with SDHC i simply believu You. btw i think trinit was released before arte(month or two) so there is a chance to have same sd hw. Sorry again, that i didnt believe it.

[geezer78]

Marvellous! In that case I would have to try it out on my XDA Orbit then. Just waiting for the 4GB SDHC to arrive. FIngers crossed.

Excellent! I am Really looking forward to your experiences!

[geezer78]

Just waiting for the 4GB SDHC to arrive. FIngers crossed.
Any Luck Yet?

[coz83_2000]

alright gutys got wm6 running. went into my local o2 store and tried one of the sandisk 4gb. DOES NOT WORK!! the only dam phone they work with without any modding is the n95!!!

[geezer78]

alright gutys got wm6 running. went into my local o2 store and tried one of the sandisk 4gb. DOES NOT WORK!! the only dam phone they work with without any modding is the n95!!!

Maybe we need some (cooked) drivers? i believe that was necessery for the p3600 as well??

thanks for giving it a try though!

[jontymisra]

Has anyone tried the official HTC ROM and tried using the 4GB MicroSDHC card?

[asd]

i ve got the XDA orbit with the HTC WM6 ROM installed and the 4 gig SDHC CARD DOESNT WORK

;(

[jontymisra]

That friggin sucks!

[fbgeeks-qtek]

Just find this driver : SDIO Hx version 1.1

Compatible omap850 on wm5 and wm6

[jontymisra]

That driver does what exactly? Has it been tested?

[fbgeeks-qtek]

That driver does what exactly? Has it been tested?

"BSQUARE announced the availability of SDIO Hx version 1.1, the newest release of its ultra high-performance software stack for Windows Mobile and Windows® CE devices. Version 1.1 features support for next-generation high-capacity memory cards. SDIO Hx version 1.1 is the only software stack with both Windows Mobile and Windows CE support for the new Secure Digital High Capacity (SDHC) standard defining high-performance memory cards from above 2 GB to 32 GB."

more information here (http://www.bsquare.com/about/story.asp?PressID=451)

Thx for info geezer78

[geezer78]

Just find this driver : SDIO Hx version 1.1

Compatible omap850 on wm5 and wm6

Hi fbgeeks-qtek,

Have you been able to find the driver?? if so, would you be so kind as to share it with us?

thanks,
geezer78

[meer]

In these (http://www.pocketnavigation.de/article/view_609_1586__HTC-P3300/2.4.67.html) test of the Artems a updated is mentointed that makes the Artemis SDC compatible.

[HaiLe512]

I extract the WM6 ROM and it does have a folder called OMAP850_SDHC.dll. I will try to extract a WM5 ROM to see if what is included there. Staytune...

I do want higher storage SD and do not want to buy a SDHC unless it works. 100 bucks can buy a lot of beer man.

[HaiLe512]

Updated...
WM5 also has the same folder. Wm6 is 2K larger than wm5. I guess due to driver update...cannot confirm at this time

[geezer78]

Updated...
WM5 also has the same folder. Wm6 is 2K larger than wm5. I guess due to driver update...cannot confirm at this time


The DLL file you are talking about has nothing to do with High Capacity SD, the SDHC in the filename stands for something else (i forgot what exactly).

[geezer78]

Hi there,

I found a thread where there are 2 files (drivers?) for the trinity. i have asked the poster if he can help us. but in the meanwhile maybe someone can give the files a try?

the link: http://forum.xda-developers.com/showthread.php?t=312499

look at the files attached to the first post

[lbendlin]

The DLL file you are talking about has nothing to do with High Capacity SD, the SDHC in the filename stands for something else (i forgot what exactly).
Host Controller

[geezer78]

Host Controller


thanks! that's it!

anyone tried the drivers yet? i don't own a sdhc card so i can't try it :-(

[AndyLawrie]

anyone tried the drivers yet?(

A couple of weeks ago I asked this question of HTC support and they told me the WM5 SD card update would enable SDHC cards to be used. So I downloaded the WM5 SD update from the HTC site, bought an 4GB SDHC card, and tried it. The Orbit did not recognise the card. I have sent another email to HTC support.

Rgds, Andy

[kinski]

I've got this reply from HTC a couple of weeks ago.


Our apologies regarding the FAQ, it is currently incorrect and the department who is in charge of the website has been informed.
The FAQ should state that we support up to 4GB with SD cards and 2GB with Mini and Micro-SD. We do not currently support SDHC/2.0 and as such we could not say as to whether these formats would work correctly with your device.
So as to repeat your question on capacity briefly, your HTC P3300 is supported for use with up to a 2GB Micro-SD card.

[geezer78]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

[kespir]

Hollleeeeyyyy :)


This CAB works for me!!!

I have a HTC Artemis P3300 with WM6, Radio-v02.97.90, 4gb SDHC

and it finally works:)

Thanx for all

[tom_codon]

Hollleeeeyyyy :)


This CAB works for me!!!

I have a HTC Artemis P3300 with WM6, Radio-v02.97.90, 4gb SDHC

and it finally works:)

Thanx for all

Nice....!
Updated in my newest version...!:D

[aslan998]

Hollleeeeyyyy :)


This CAB works for me!!!

I have a HTC Artemis P3300 with WM6, Radio-v02.97.90, 4gb SDHC

and it finally works:)

Thanx for all
really ???????????????:confused: :confused:

[Twiggerdingo]

Nice....!
Updated in my newest version...!:D

Hey Tom WB! (Welcome back, good 2 c u!)

[Sir1]

...and does it still work with standard MicroSD??? (Not that you'll ever go back to a smaller size ;o)
Regards
Søren

[epmulligan]

Hollleeeeyyyy :)


This CAB works for me!!!

I have a HTC Artemis P3300 with WM6, Radio-v02.97.90, 4gb SDHC

and it finally works:)

Thanx for all

Kespir

Please let us know make and model of card your using. Could you also tell us how formatted, FAT16 /32 etc.

Thanks

Emul

[mr.lumbergh]

Anyone try this out on a treo w/wx? I don't have a sdhc card to test it out :(

If it works I will be getting the 8gb :D

[nemanracing]

Anyone try this out on a treo w/wx? I don't have a sdhc card to test it out :(

If it works I will be getting the 8gb :D

I have used this on my Treo 700 WX and both my wm5 and wm6 XV6700's. Now i am able to use my 4 gb SDHC on all of those as well as my regular cards...

[nightswim]

Hollleeeeyyyy :)


This CAB works for me!!!

I have a HTC Artemis P3300 with WM6, Radio-v02.97.90, 4gb SDHC

and it finally works:)

Thanx for all

I have HTC P3300, cab installed, but i can't see my 4GB microSDHC SanDisk card. I have official WM6 ROM from HTC.

Any ideas? Thanks!

[Denischti59]

the official rom of the P3300 did not leave yet…

[bababa]

any news when the official HTC P 3300 WM6 ROM comes out?

I have a device that says

IPL 1.14001
SPL 1.14000
GSM 02.67.90
OS 1.14.0

can I use the "Artemis_USPL" CID-Unlock? It's only SPL 1.11 as far as I can see? Or do I have to use the commercial service?

[tom_codon]

any news when the official HTC P 3300 WM6 ROM comes out?

I have a device that says

IPL 1.14001
SPL 1.14000
GSM 02.67.90
OS 1.14.0

can I use the "Artemis_USPL" CID-Unlock? It's only SPL 1.11 as far as I can see? Or do I have to use the commercial service?

No need use the commercial service.U can Unlock your phone with USPL by Pof
Info here :
http://forum.xda-developers.com/showthread.php?t=311403

If it work and u happy with it Donate to Pof (https://www.paypal.com/cgi-bin/webscr?cmd=_xclick&business=pau%40eslack%2eorg&item_name=xda%2ddevelopers%20donation&no_shipping=1&cn=Comments&tax=0&currency_code=USD&bn=PP%2dDonationsBF&charset=UTF%2d8)

Cheers..!

[bababa]

Thank you, Tom! It works like a charm - with one exception: SDHC drivers posted in this thread do NOT work... is this depending on the ROM I use? E. g. if I use B&B4.1 it works and on Artemis Touch WWE 1.0 it won't?

Hell, we all need those SDHC drivers to surface :)

[anters]

Tried the drivers listed here on my XDA Orbit with O2 WM6 rom. Unfortunatly it didnt work with my 4gb microsd hc, but my 1gb microsd still works fine.Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

[ymson73]

Hi..

I am Yeongmoon Son living in Korea
I have O2 XDA Orbit which is upgraded into WM6

I tried SDHC driver on my PDA

It seems that the driver works.
But I have a problem:
Wireless LAN doesn't work while SDHC driver is installed on my PDA.

When I click on WLAN button in Comm Manger of my PDA, PDA seems to try to activate WLAN I/F (Waiting cursor apprears in the middle of screen for a while). Nevertheless, WLAN is not activated.

I removed the SDHC driver from my PDA. At that time, WLAN does work.

How about your PDA?

Could you do me a forvor to tell me how your WLAN operates after installation of SDHC driver on your PDA?

Thanks

[manaaa]

Hi..

I am Yeongmoon Son living in Korea
I have O2 XDA Orbit which is upgraded into WM6

I tried SDHC driver on my PDA

It seems that the driver works.
But I have a problem:
Wireless LAN doesn't work while SDHC driver is installed on my PDA.

When I click on WLAN button in Comm Manger of my PDA, PDA seems to try to activate WLAN I/F (Waiting cursor apprears in the middle of screen for a while). Nevertheless, WLAN is not activated.

I removed the SDHC driver from my PDA. At that time, WLAN does work.

How about your PDA?

Could you do me a forvor to tell me how your WLAN operates after installation of SDHC driver on your PDA?

Thanks

where you got your drivers from?
could you share YOUR SDHC DRIVERS with us?
pls attach it here, so others can test your drivers and maybe fix the wlan problem : )

ty in advance

so far ..

[manaaa]

the official rom of the P3300 did not leave yet…

http://www.asia.htc.com/asia/event/WM6/download.html !!!

[cybercontroller]

http://www.asia.htc.com/asia/event/WM6/download.html !!!

Hi manaaa,

it seems that the dopod upgrade for WM6 is really there - but only for registered users unfortunately.
Can you confirm that SDHC is really working?
Which Micro SD card did you use?
Rgs
Cybercontroller

[manaaa]

Hi manaaa,

it seems that the dopod upgrade for WM6 is really there - but only for registered users unfortunately.
Cybercontroller
im no registered member too.
if you thought the new rom would solve the sdhc prob.. i dont know if its works after update but i guess not.


Can you confirm that SDHC is really working?


i hoped ymson73 could send us his sdhc drivers to test it.

ymson73 is tha man for now, seems he has working sdhc drivers with bugs


so far ..

[mpik]

Hi,

I just installed the previously linked "sdhc.cab". I see the "HTC SDHC" entry in the uninstall software menu. My SanDisk 4GB microSDHC does not seem to work (Settings->Memory->Storage Card show 0MB used, 0MB available - any tools known to show SD card slot contents and/or format SD??????????????!!!!).
I can confirm, that WLAN does not work until I uninstall the driver. I'm using the WM6 ROM from O2 (german).

Any ideas???

mpik

[alfiejts]

Well my 6gb micro-SDHC card arrived today (originally to go with my new 2gb P3300 that arrived on Tuesday) but from the discussions so far, I can't see much point upgrading the standard HTC WM5 OS yet until someone has some success...

Looks like I've just bought myself a fairly expensive 6gb USB pen drive with no other use at the moment....

[Shadoe]

Hello, I am using the ROM from Mark (Meschle)
Touch 2.0 WM6 Full

I am using a Scandisk Ultra 2 Micro Card with 2GB.
Works perfect here, and fast..


l8ter
Tim

[athanaso77]

Hello, I am using the ROM from Mark (Meschle)
Touch 2.0 WM6 Full

I am using a Scandisk Ultra 2 Micro Card with 2GB.
Works perfect here, and fast..


l8ter
Tim



The problem is not the 2GB microSD cards... Artemis never had problem with these.

The problem is to make microSDHC (bigger that 2GB and up to 32GB) to work with Artemis.

[bugfree]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

No luck for me. :mad:
O2 Orbit WWE 3.7

[herbie65]

Well my 6gb micro-SDHC card arrived today (originally to go with my new 2gb P3300 that arrived on Tuesday) but from the discussions so far, I can't see much point upgrading the standard HTC WM5 OS yet until someone has some success...

Looks like I've just bought myself a fairly expensive 6gb USB pen drive with no other use at the moment....

No luck for me. :mad:
O2 Orbit WWE 3.7

I don't understand you guys; You both do like it is the fault of the guys who are doing a lot of work for all of us, that your SDHC is not working.
And i have an idea for you: Sent your "fairly expensive" card to Meschle, so he can try to make it work. He wrote many times that he doesn't have a crad to test.....

[bugfree]

I don't understand you guys; You both do like it is the fault of the guys who are doing a lot of work for all of us, that your SDHC is not working.


didn't mean :mad:
I meant :(

[alfiejts]

I wasn't getting at any of the excellent people who are helping us by cooking enhanced ROMs, merely commenting that it doesn't look too hopeful that we'll ever get SDHC working on our Artemis's.

The extract below explains the problems with full-sized SDHC compatibility but this also applies to the micro-SDHC issue.

The SD card access protocol uses byte field addressing whereas the SDHC controller requires block field addressing. As it says below, although minor, a firmware upgrade is required to enable this change (which is more than just the operating system or drivers).

FAT32 is already needed to access any address above 1gb, so this alone isn't the issue, the real problem is the firmware of the SD device IO controller which doesn't currently cater for block-mode addressing..

So, I fear, unless HTC release an actual firmware upgrade for the device hardware controller, we're not going to see SDHC working on our Orbits or P3300s.....

Quote from the SD standards organisation:

"A new SD format, SDHC (Secure Digital High Capacity, SD 2.0), allows capacities in excess of 2 GB. SDHC uses the FAT32 file system which supports a higher data density than FAT16. It uses the same form factor as SD, but the SD 2.0 standard in SDHC uses a different memory addressing method (sector addressing vs byte addressing), thus theoretically reaching a maximum capacity of up to 2048GB. SDHC cards only work in SDHC compatible devices, but standard SD cards work in both SD and SDHC devices. The SDHC trademark is licensed to ensure compatibility.

Compatibility with 2 gigabyte and larger SD cards has been poor, due to the SD/MMC protocol's using a 32-bit address field denominated in bytes. The SDHC standard addresses this limitation by using 32-bit block addresses instead. Both SD and SDHC are traditionally accessed as 512-byte blocks on 512-byte boundaries, so the change to host software or firmware is minor but required. Before SDHC was standardized, various manufacturers "extended" the SD control block fields for their 2 GB and 4 GB cards in different ways. Those cards are incompatible with many SD and some SDHC devices, as they conform to neither standard. All SDHC readers work with standard SD cards."

[kakainis]

Don't underestimate our hackers, I think USPL hack is on the same level that this SDHC driver issue, so keep holding your breath. :D

[mpik]

http://www.uwsg.indiana.edu/hypermail/linux/kernel/0701.0/0741.html

This (and the tendency to move the most hardware functionality into software) suggests that SDHC support is a question of the right drivers.

Are there any proven successes in trying to get a SDHC card working?

[dominick_7]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

WOW! This actually allows me to read data off of my 8GB SD Card for my Samsung i730. I haven't tested whether it actually reads AND WRITES all 8GBs, but I assume it won't..I'm using the SD CArds to backup my Computer before I reformat because my DVD Burner doesn't work..I will test it but it will take a while..Is there a way you/ or someone can make sure it reads and writes above 4GBs on a Samung i730, or is it already supposed to do that? Thanks.

[TryOG]

no, wont work. there is different sd-reader HW. You are asking questions like if i can play DVDs on my CDplayer after firmware upgrade. NO IT WONT.

Actually, there was an HP CD-Burner that could read DVD's after a software hack.

I don't remember it clearly, but I think they had the DVD-lens in the burner, but blocked the DVD reading part. Because of some license problem or something. And that happens often.

And this kind of questions shouldn't be WRONG, because if he hasn't learnt it until today, he should learn it RIGHT NOW. :)

EDIT: I didn't replies to this guy's message, so don't read this ;)

[stingraze]

Any one know if the sdhc will work on Windows CE .NET 4.1? I have a Sigmarion III, and was wondering if it will work on it.

[fuhrmann]

I have used this on my Treo 700 WX and both my wm5 and wm6 XV6700's. Now i am able to use my 4 gb SDHC on all of those as well as my regular cards...

Hello: Newbie here.

How would I try this and how would I undo it if it doesn't work?

Bill Fuhrmann
Treo 700W

[jwhitham]

Has anyone got a SanDisk 6GB MircoSD working with this driver?

I have installed the X500 driver on my Toshiba and it can read the 4GB card fine but the 6GB card shows as 1.7GB (even with 5GB of data on it) and cannot be written to. Although you can read the files fine.

So I'm not sure if this is a problem with the card and driver or specific to the G900. Anyone with any device using this driver using a 6GB card ok?

[nemanracing]

Hello: Newbie here.

How would I try this and how would I undo it if it doesn't work?

Bill Fuhrmann
Treo 700W

Download the cab file, and transfer to you device. When you install the cab file, You can remove it from the installed programs.

[Maiisoh]

Has anyone got a SanDisk 6GB MircoSD working with this driver?

I have installed the X500 driver on my Toshiba and it can read the 4GB card fine but the 6GB card shows as 1.7GB (even with 5GB of data on it) and cannot be written to. Although you can read the files fine.

So I'm not sure if this is a problem with the card and driver or specific to the G900. Anyone with any device using this driver using a 6GB card ok?

Can't get the 6GB card to work with my xv6700 either. Is there any chance of the sdhc cab being updated to work with this card. Sandisk is supposd to come out with a 8GB card by the end of the year and it would be great to be able to use either if we had an update for our phones.

[vrich75]

I got it to semi work in my Ipaq 2755. It will read my 8gb card but it only see 4gb of the card.. don't know how to get the hole 8 yet. Also it cause the wi-fi to not work.. every thing on mine works except that.. but I don't use it any way. I am going to list things I saw wrong I found with the PDA viet Rom. some one else can list if for the 4PDA one.
1. The WM player will not work that well.. was told this is due to codecs problem
2. The windows live doesn't work off the bat - you have to download another one to fix this.
3. SDHC is not supported at first you have to down load the drivers (yes they work) but you lose wi-fi if you install them (this must be a bug or a fix is needed here)
4. Contact and calendar don't work at first it just flickers or you can't store dates and time and etc (you must do another hard restart) a soft one will not do to correct this. - in other words it must tell you it is formating.
5. Blue tooth has a issue - you must download the driver for this.
6. Some people have report that active sync keeps alive even with disconnected causing the unit to discharge and die. Even when off. There is a fix at HP site for this not sure if if works on WM6 though.

[zandadoum]

sorry for my noobiness... but what has the Ipaq 2755 anything to do with an HTC artemis?

[EdenzoXDA]

Really don’t get it.

Updated my Artemis with a Dutch rom found on de HTC FTP site and while looking at the registry found the following keys:

[HKEY_LOCAL_MACHINE\Drivers\Active\59]
"Hnd"=dword:008ebe40
"Name"="SHC1:"
"Key"="Drivers\\BuiltIn\\SDHC"
"BusParent"=dword:00032690
"InterfaceType"=dword:00000000
"BusName"="BuiltInPhase1_0_14_0"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
"BaseClockFrequency"=dword:01312d00
"CDPriority"=dword:00000065
"CardDetectSysIntr"=dword:0000001d
"SDIOPriority"=dword:00000064
"ControllerIRQ"=dword:0000001c
"Prefix"="SHC"
"Dll"="OMAP850_SDHC.dll"
"Order"=dword:00000021

Does that mean it does have a SDHC driver?
Can’t verify if this works because I don’t own an SDHC card nor do i understand the registry keys.

[geezer78]

...
"Dll"="OMAP850_SDHC.dll"
"Order"=dword:00000021

Does that mean it does have a SDHC driver?


Nope, sorry, the SDHC in this dll filename stands for SD Host Controller as opposed to SD High Capacity

[Vege]

Yesterday my Samsung Blackjack i600 WM6 did not id my 4GB micro sdhc card.

Today, after applying the sdhc.cab it does ;)

No other issues yet, will report if I find any. Until then, let me be your secks slave to repay the debt :D

[shawndh]

Yesterday my Samsung Blackjack i600 WM6 did not id my 4GB micro sdhc card.

Today, after applying the sdhc.cab it does ;)

No other issues yet, will report if I find any. Until then, let me be your secks slave to repay the debt :D

What does the Samsung Blackjack have to do with an Artemis?:confused:

[alfiejts]

Nope, sorry, the SDHC in this dll filename stands for SD Host Controller as opposed to SD High Capacity

Except that the problem with getting the Artemis to recognise SDHC cards, is that the SD Host Controller needs to be changed so that it will work in block mode addressing instead of byte mode addressing, which is what High Capacity cards use, so the SD Host Controller drivers are exactly what we will need to upgrade eventually, when someone finds a block-mode host controller driver that works on the Artemis......

[Mr.Feelgood]

HTC TyTN II and Touch uses microSD...
Whats about dll from TyTN II or Touch?

[mugglesquop]

i thought it was a hardware issuse, not software.... i might be wrong :D

[franktompson]

Just installed on my IPAQ 6915 and works fine.

VMT to whatever genius came up with this. Hunting around for 4Gb non-SDHC mini SD cards was a real pain and they now seem to be almost unavailable.

I shall follow this forum with interest to see how things progress with higher capacity micro SD cards.

Wow, what a good start to the day!

[mugglesquop]

Just installed on my IPAQ 6915 and works fine.

VMT to whatever genius came up with this. Hunting around for 4Gb non-SDHC mini SD cards was a real pain and they now seem to be almost unavailable.

I shall follow this forum with interest to see how things progress with higher capacity micro SD cards.

Wow, what a good start to the day!

apparently, there will be 8Gb SDHC cards availible soon.... :D

i presume you have read that someone has made a ROM that lets the Artemis read SDHC....

[geezer78]

i presume you have read that someone has made a ROM that lets the Artemis read SDHC....

Indeed! Big Thanks to Bepe, he has solved the puzzle! Now we can use big micro sd cards with our Artemis!!!

you can download bepe's rom from http://forum.xda-developers.com/showthread.php?t=340748

or you can use Meschle's new rom from http://forum.xda-developers.com/showthread.php?t=342298

[alfiejts]

Yes - I can confirm. I've tried both Bepe's ROM and Meschle's 3.01 ROM and my 6gb SDHC card works fine with both......

You just need to ensure that you remove the SDHC card before "flashing", as you can't flash a ROM with the SDHC card inserted.

[zandadoum]

i presume you have read that someone has made a ROM that lets the Artemis read SDHC....

awesome!

now... i don't use any special cooked rom, i use original HTC WM6 ... is there any way now to get a 4GB microSDHC working on my P3300 without having to flash a whole new rom? i am not a big fan of roms to be honest.

[s3tTz]

Yesterday my Samsung Blackjack i600 WM6 did not id my 4GB micro sdhc card.

Today, after applying the sdhc.cab it does ;)

No other issues yet, will report if I find any. Until then, let me be your secks slave to repay the debt :D
This post came up in my Google search on this issue. Just installed the sdhc.cab on my phone. If it works, I'll gladly be your secks slave! :D

[jburgess]

Silly question I think. Does this one sdhc.cab file fix the ability to use a 4gb micro sd memory in the Samsung i760 by any chance? Or does the Samsung have it's own unique cab file? If so I can't find one.
Thanks, jEff
:confused:

[ipaqusernz]

i got linked here from another site wher ipaq 6945 users have sucessfully used this cab file.

http://mobilitytoday.com/forum/showthread.php?t=16180

i tried it on my 6515 and it didn't work and disabled the sd slot entirely... have been able to use a hp update which got the ipaq seeing the normal sd cards again. if anyone is sucessfull with the hp ipaq 6515 i would be keen to know

[Av8eR]

I just installed the file on my Ipaq hx2495b and it seems to work great so far.

Thank you!

[alstarr]

I used the sdhc.cab to get my iPAQ rx5915 to recognize a Sandisk 4GB SDHC card. The only issue was that after the unit went to sleep and "re-awoke" the card was not seen and I had to perform a soft reset. Then I stumbled upon this thread - I tried it and all is now as it should be.
http://www.pda4x.com/read.php?tid=57284

[Sequenzial]

Hi,

well I can confirm: IT IS WORKING

1.)
I got this 8 GB MicroSD-card (SDHC) from Amazon:
http://www.amazon.de/SanDisk-SDSDQR-8192-E11M/dp/B000WH6H1M/ref=pd_bbs_1?ie=UTF8&s=ce-de&qid=1198272372&sr=8-1

2.)
I installed the SDHC cap
ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/SDHC-Artemis.cab

3.)
I used the 8 GB
(I copied all TOMTOM, Navigon MAPS and a lot of MP3/AVI onto it -> perfect !!!)

________

BUT:
Using WM5torage and ActiveSync is very slow (~500 kb/s)
(so I used the USB-Adapter, that is VERY fast).
Internal access (playing mp3 or reading larger maps) looks ok to me.

Have fun!
_____
Seq

[CambaAmba]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

Hi,

I apologize for posting HP IPAQ stuff in this thread, but link to it was created from HP WM5 SDHC card support. Because WORKING !!! :) cab was from this thread I hope that people from this community will find this experience useful.
As the title says I used SDHC cab from this thread and applied it directly to WM5. So procedure was realy simple - just install sdhc.cab. After reset my IPAQ recognizes "old" 2MB SD card and new 4GB Kingston SDHC 4 GB class 6 card. Many thanks to everyone participating in solution

Linking threads:

http://forums11.itrc.hp.com/service/forums/bizsupport/questionanswer.do;HP-FORUMS-S-WPA-IDX=HcmLGnNr65WBhdhPGJYk18wdyqwFxRDn0DHq7cHJqG5GpN nmpp7J!-2121343701!-1885766594?threadId=1174150
http://forums11.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1020250

Amba Camba
IPAQ rw6815 WM5

[ezguy]

I Installed this SDHC as well and It works great with My Ipaq rx9510 Travelmate. So far the biggest problem I had with other drivers, after I shut down the unit.. and restarted it it would loose the sdhc card and I would have to soft reset it every time to get it to work.

This Driver seems to be holding up...
Ill keep you posted if there are any changes.
Though it doesnt give me the remainding space available on the card on the HP storage as it did with the regular cards.

[beveridge]

i just put the cab on my rx5915.. did soft reboot and it appears to work.
It recognized it anyway.
I am just putting a couple of movies on 4gb sdhc to see how it works.

Hey just pluged card back in and am watching 'Transformers' on pda.

yahoo seems to work ok

opps I DO LOSE THE CARD AFTER SUSPEND
I have to soft reboot to get it back.

[fordy]

HI, I have a P3300....
I installed the Artemis sdhc cab as listed above and put in a 4gb SANDISK SDHC card fom Amazon. It works fine!!:):)
I also have full use of my Wifi which some people seem to have problems with.
I can also STILL read my old non-SCHC 2gb card.

Off to try it on my friend's Orbit now.

Cheers....Thanks for this site, really good !!!!

Rob

[UnschuldVomLAN.de]

Hi, with ther German WM6 Rom from T-Com the 8GB SDHC-Kart works fine.
I had Problems with the original HTC WM6 ROM, the SDHC Patch dosent work.

I hope it was helpfull.

[gmihajlovic]

Hi,

well I can confirm: IT IS WORKING

1.)
I got this 8 GB MicroSD-card (SDHC) from Amazon:
http://www.amazon.de/SanDisk-SDSDQR-8192-E11M/dp/B000WH6H1M/ref=pd_bbs_1?ie=UTF8&s=ce-de&qid=1198272372&sr=8-1

2.)
I installed the SDHC cap
ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/SDHC-Artemis.cab

3.)
I used the 8 GB
(I copied all TOMTOM, Navigon MAPS and a lot of MP3/AVI onto it -> perfect !!!)

________

BUT:
Using WM5torage and ActiveSync is very slow (~500 kb/s)
(so I used the USB-Adapter, that is VERY fast).
Internal access (playing mp3 or reading larger maps) looks ok to me.

Have fun!
_____
Seq

Same here, XDA-Orbit WM6, followed the above, all works so far, Copilot (just copied data from Copilot 512 SD to new 4GB SDHC), my new software (I am a gas engineer), music the lot, no issues with WIFI so far, great forum

[nihasa]

hx2490b wm5 ... worked like a charm on my 4gb apacer sdhc

thanx.

[bneuro1]

Hello

I installed SDHC-Artemis.cab and on my htc p3300 with original wm6 and with a SandDisk 4 sdhc all is working well

[kiwi992]

Hi All,


The microSDHC card patch for Artemis by BEPE works flawlessly on my XDA Orbit. I've never faced any problem with the apps on my phone - WiFi, TomTom Navigator 6, and VFR charts (aviation maps) all work fine.

In fact, my 8gb Sandisk microSDHC card is already full! I've got several full motion pictures and mp3's on it. I can't wait for the 32gb to come out.

Thanks once again to Bepe for the patch.




kiwi992.

[mithrin]

Hi just to say installed in my O2 Trion, works great. Thanks.

[anicolac]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

The cab works with Portégé G500 card Mini SDHC4Gb.
Thanks :)

[gtmatt22]

I am still having problems. I can see my card at times but it disappears other times. I have installed the CAB twice. After the install it will recognize the card but shortly there after, ~12 hours or so, it won't show up on file explorer. I am running WM5 on a Treo 700wx. Thanks.

[Takie]

Does this also work with WM5? I'm hope so because my P3300 hasn't got WM6.

[mseewald]

Yesterday my Samsung Blackjack i600 WM6 did not id my 4GB micro sdhc card.

Today, after applying the sdhc.cab it does ;)

No other issues yet, will report if I find any. Until then, let me be your secks slave to repay the debt :D

I would like to confirm the same for an 8GB MicroSD SDHC Card. I bought it from Amazon.
http://www.amazon.de/SanDisk-SDSDQR-8192-E11M/dp/B000WH6H1M/ref=pd_bbs_1?ie=UTF8&s=ce-de&qid=1198272372&sr=8-1

Thanks to whoever made the little sdhc.cab!
Michael

[k_o_t_s]

I would like to confirm the same for an 8GB MicroSD SDHC Card. I bought it from Amazon.
http://www.amazon.de/SanDisk-SDSDQR-8192-E11M/dp/B000WH6H1M/ref=pd_bbs_1?ie=UTF8&s=ce-de&qid=1198272372&sr=8-1

Thanks to whoever made the little sdhc.cab!
Michael

could you please tell us if wi-fi is still working after the sdhc.cab installation and if your i600 can still recognise non-sdhc cards (2gb or less)

[mestro]

Just put this on my 6945 and it seems to be working just fine.

[beaches]

I was so proud of myself finding a great price for a 4 GB SD card online and little did I realize until it arrived that it was a SDHC with all kinds of warnings regarding compatability. Then I realized that my Treo 700 mx was not compatable.....

I was quite relieved to find this "patch" which worked easily and seemlessly.

Thanks again.

[balasriram]

Thanks soooooo much! I was thinking my sdhc card is a waste. But now it works like a champ. If it were not for the person who did this I would have returned my phone. Thanks once again.

Card Mfr: Kingston - 4GB - MicroSD (Mini sd adaptor used)
Phone: HP IPAQ 6920 (Non camera)

UPDATE: Card is detected but does not allow any data to be transferred. What do i do????????????? Please help.

[geezer78]

Hi there guys,

since i started this thread a lot has happened.
my original question was asked to find out if the upcoming upgrade to WM6 would bring us SDHC capacity to our artemis... everybody thought it wouldn't and briljant minds created the sdhc cab that works for so many people (but not me..)

Other briljant minds created roms that are sdhc capable, so I too am using a nice big card now ;-)

but i actually never even checked out if the original update of my provider T-mobile NL to WM6 did or did not bring the update... But now i did... and guess what: T-mobile NL WM6 rom for artemis has SDHC support! so there's your answer ;-)

[souljahh2050]

Does anyone know if the SDHC.cab works with the T Mobile dash?

[revere]

i can verify this works with a Dell axim x51v running windows mobile5
no problems (wifi/bluetooth/normal sd cards all still work)

had nothing to lose so i gave it a go ;)

[sabbathbh]

i can verify this works with a Dell axim x51v running windows mobile5
no problems (wifi/bluetooth/normal sd cards all still work)

had nothing to lose so i gave it a go ;)

Please, be more specific, which size is the SD ? 6GB ? 8GB ?

[sergeyso]

The mentioned SDHC driver works for rx5940 Thanks a lot!

[josephcowan]

HP2795, the driver works flawlessly with my ONY SDHC 4Gb card, was not even recognized before

[algypan]

SDHC-Artemis.CAB driver works on O2 Orbit WM6 - I can now see my 4gb sdhc card.


WIFI works well, no issues found.

[gnfr01]

Absolutely wonderful! The patch worked great on my Ipaq 2490b
I now have 4bg sdhc recognized.
Thank you guys!

[davidE_08]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

ok im sorry if i sound like a noob i am not a computer person one bit, but after i download the attatchment what do i do? i got these four files and i dont no what to do with any of them thank you for the help.

[hiyouqing]

Absolutely wonderful! The patch worked great on my Ipaq 2490b
I now have 4bg sdhc recognized.
Thank you guys!

Hi，does it work under WM6？

[cosmabgd]

yes it work i have a 8GB sandisk and it is work perfect with artemis touch 4.02 ROM wm6.1

[wgarciaa]

a mi no me funciona el driver para mi htc s620, alguien tiene otro driver para que funcione, no me funciona mi sdhc de 4gb :(, muchas gracias.

[bonzo222]

it works well with my hp rx5935

THANKS

[vikasch]

This cab works on my HP Ipaq 6940. I'm using 4gb micro sdhc card with mini SD card adapter. This card combination was not working before installing this cab file. Great work guys

[ady_uaic]

The mentioned SDHC driver works for rx5940 Thanks a lot!

does exist wm6 for Rx5940 ?

[huyvu98]

I installed the driver in my RX5915. Tried it with 4 gb SDHC = works fine. 16 GB SDHC = only recognized as a 3 GB.

[bangar]

My HTC P 3300 with 4gb hdsc is working fine with following CAB


Thank You Very Much For Sharing This CAB

My PDA Details :- (This are came with my Phone)

model no :- arte100

cpu :- omap850

speed :- 201 mhz

ram :- 64mb

flash size :- 128mb

data bus :- 16bits

display :- 240x320

rom :- 3.7.707.1 wwe

rom date :- 6/21/07

radio ver :- 02.69.90

protocol ver :- 4.1.13.30

extrom ver :- 3.6.707.101

[gudmundsonsc]

I have an iPaq rx5915 and my testing shows that for me the best SDHC cab file is SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_Fre ePK.cab 32.8kb which can be found all over this forum.


SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_Fre ePK.cab - BEST OPTION OUT THERE
SDHC.cab - does not work above 4gb (shows the storage card, but can't access files stored outside the first 4gb).
A639_SDHC.cab - does not even show a 16gb card.
SDHC-Artemis.cab - does not even show a 16gb card.


On other note I was able to avoid having to soft reset every time by adding this registry value (using pregutl with activeSync):

pregutl -s hklm\DRIVERS\SDCARD\ClientDrivers\Class\SDMemory_C lass :DisablePowerManagement=dword:1

But be careful with this. For example if you leave a file open and playing in media player and turn it off and on, it will freeze and lock up, then requiring the soft reset you were trying to avoid.

[mft39]

hmm ... first of all thank you guys fo this thread. I got iPAQ rw6815 and insatlled that cab attached above HTC Driver SDHC. And I hope it will work well with Sandisk product. I will post a result once I will buy&test it.

[conchchowder]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

My rx1955 is now playing a 4GB SDHC card filled with lossless WMA files thanks to you!

[lanu42]

hi ,
ı want to use 4 gb micro sdhc kart in my smartflip wm 6.1, but it dosnt work.
if anybody now which sdhc.cab driver can ı use?
thanks for help...

[htckaiseruser]

hi ,
ı want to use 4 gb micro sdhc kart in my smartflip wm 6.1, but it dosnt work.
if anybody now which sdhc.cab driver can ı use?
thanks for help...

Try these two, one of them will work with 4gb. delete the one from your phone that dont work

[CAPECAPE]

Run greats! ty!!

[cornstick]

I did the WM6 update on my 700wx today. I tried my 8GB SDHC card and with the stock VZW build it did not see the card at all. After running the SDHC.cab it now sees the card. BUT.... Only 3.5GB of it.

[dontpannic]

no, wont work. there is different sd-reader HW. You are asking questions like if i can play DVDs on my CDplayer after firmware upgrade. NO IT WONT.

Bet you feel silly now lol :D

[dannybose]

Guys i have a SPV C100 and a 4G Memory Card and nothing or no cab seems to work. I hate this phone but for the time is the only one i can aford until i get back to my nice new White Niki. Can anyone help me make this card work in the SPV C100? Thank you guys in advance!

[gurinder7singh]

My 8Gb was working with in windows mobile 5 and is fine in windows mobile 6 afrer firmware update !!!!

[1 of 5]

Just got a 4gb sdhc up and running in a SPV M3100 on WM5 using
http://rapidshare.com/files/53794030/sdhc-driver-x500.zip.html

[johnathanamber]

Hey everyone,

I've got a Palm Treo 700wx.

I also have the SDHC_WM5WM6.zip file.

I recently did a hard reset.

I've used this before with this palm so I know it works.

However when I installed the SDHC.cab, it did ;let me see and copy from the card, but then I could not write to the card. But when I replace the two DLL files in the Windows folder and install the Cert.cab, I can no longer see the card.

Any ideas?

God bless,
Johnathan

Visit my sites:
http://www.agodblessedman.com
http://www.tsgcomputers.net

[ichigoni]

i got read some forum to mention the detail of installation of it
you may go and try the step.

http://forum.bisik.net/viewthread.php?tid=32&extra=page%3D1

[pinitoair]

Thanks a lot, I just installed an 8 gb sdhc on my ipaq 1150. it really works.
Thanks again to all the members for all the input every provides.

[Dizzyliciousess]

I'am new to this does anyone know how to install this because I have know idea how!

[MarcoRM65]

Many thanks !! I have a Kingston 4Gb micro SDHC (in a mini SD adapter) splitted in 2 primary partitions of 1.9 Gb each and they are fully recognized by my HP Ipaq hw6915. I will use one of the 2 partitions for all TomTom stuff and the other one for file storage (mp3, avi, imags, ecc....)

I used the driver attached in THIS (http://forum.xda-developers.com/showpost.php?p=1492651&postcount=31) post.
Thanks again.

[Nosfi]

I have an Artemis with radio rom 3.34 and WM6.1: ARTEMIS & LOVE WM6.1 ROM V35 (BLUE) - Build 20924.1.5.0 (Manila2D) and my SDHC 4gb Sandisk works flawlessly.

With the original update from HTC sdhc (WM6) it doesn't work.

[finncolors]

I tried your hack on my Ipaq hw6915 running windows mobile 5.0 and it did not work . I returned the chip and purchased a 2g for now but maybe there is something different about the Ipaq ??? thanks for trying though\


gary

[milsum]

how do i use tjis zip file or how do install it

[milsum]

how do i use ths attached file anyone ! im new! :confused:

[jobbie]

how do i use ths attached file anyone ! im new! :confused:

You will need to unzip the file first (should be a CAB file inside). Transfer that file to your Artemis, than run the CAB file.

[twindaniel]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

It works 4 me.Thanks a lot

[bigboy87]

I installed SDHC_DRIVERS_FOR
_C550_AND_N560_BY
_GreateVK_AND_FreePK.cab
, my hp ipaq hx2490b recorgnized SDHC card, but i can't write data to it. Please help me,
what can i do??

[Critical_C]

Thanks for sharing

[callpavan]

Hello Friends... Thanks for the files. Can some one post the installation instructions please. I have downloaded the files but don't see .exe file or some thing relevent to install.

Thanks in advance..

[adam1890]

Very Good ROM so fast, i like it!

[ill4elements]

This works with my tmobile dash. didnt see if anyone confirmed that it worked for it or not. so far i can read and write to the 4gb sdhd card.

ftp://xda:xda@ftp.xda-developers.com/Uploads/Artemis/SDHC-Artemis.cab

[arojasc]

I do not know if work after WM& update, I would like to let you know that I use on my HP 6945 and now I can use a 4 Gb SD Card

Thanks to the guy that add this cab :)

[dustuseley]

It worked with my ipaq travel mate. After installing the provided cab file, it was able to access my 8GB SDHC card where I had 2.3 GB already stored, how ever it was showing : Total storage card memory: 1777.50MB , In use: 1354.50MB (But actually it is over 2700.00MB in used) Free: 423.00MB, I don't understood why it showed those information wrong, but I am happy to be able to read the card. If any of you know the solution to fix those size related information, let us know. Thanks again!!!
~ AL-Amin

[sofocado]

I have a M88 Is not reading the 8GB card. I have search but no luck. Can anyone help me out? Thanks

[nicino]

Just wanted to say thanks as i can now access my 4gb SDHC via my blackjack. Much apreciated. :)

[1mexicano1]

Man it didnt work 4 me =[

[DarkPlex]

I use a Toshiba microSDHC 8GB Class4 Card on my XDA Orbit with gullums TF2D Beta5.

[Pastorpeter]

I tried the Cab in HP Ipaq 6900 series and it is working just fine, my 4gb sdhc card now works when it simply would not read it before. Thanks

[LEFTKOYL]

Hi,
Is there any solution if we put wrong drivers for sdhc?
Because the mobile is stuck at green screen.
Is there any safe boot?

[dolzenko]

Thanks a lot!

The driver from the first post worked on my old iPaq rx1950 with Kingston SDHC Class 6 4Gb SD card.

[laricasdog]

Thanks a lot!

The driver from the first post worked on my iPaq 9640 with Kingston SDHC micro 4Gb SD card on minisd adapter.

[nikqd2]

Could someone please try the drivers mentioned in this thread in e-ten user forum, suposedly they are htc drivers... and they work succesfully for e-ten x500....

http://eten-users.eu/index.php?showtopic=9410&st=45

thanks in advance!

Geezer

WOWWW it's works... my artemis can working now and i will have alot of storeage ... feuture i will try 8gb and 32 gb i will tell if it's work

[toshikovskij]

Yeaaahhh ;] HP IPAQ 5710 perfectly works with 4GB Kingston SDHC after driver install ;] big thaks to all of You :D megarespect