PDA

View Full Version : Anybody who has Smart MMS Settings for WM6 Hermes?


jenellej
8th June 2007, 04:36 PM
Anyone who has the cab settings or the manual procedure?

boz
8th June 2007, 09:10 PM
If you have no luck here, contact Smart and they should be able to send them to your phone.

Anyone who has the cab settings or the manual procedure?

joel32137
10th June 2007, 10:59 PM
Or, can always google Smart GPRS or Smart MMS. You should find all the configurations online.... this is assuming you know how to setup GPRS and MMS (in WM5 or WM6) in general.....

pa7rb
11th June 2007, 03:46 PM
Download HTC.COM new for WM6 (use the S710 file) works for Hermes WM6

pa7rb
11th June 2007, 03:48 PM
HTC.COM use de File for the S710 works for Tytn Hermes WM6

jenellej
11th June 2007, 05:36 PM
Where do i download this file? Do you have the direct link?

gbellini
7th July 2007, 10:48 AM
http://www.europe.htc.com/support/software/htcs710.html

cheers

jlahing
7th July 2007, 10:46 PM
GPRS Settings

Go to Settings> at the bottom tap Connections>Inside it tap another Connections> then Advanced> Select Network> Under Network Management -" In My ISP" - tap NEW> Under "MY ISP Name" – set to SmartInternet > tap MODEM at the bottom,> tap" New" ,> Under Make a New Connection - Enter a new connection name (SmartInternet) , Under Select a modem - tap " cellular line (GPRS, 3G)", then "Next" > Under Access Point name enter – internet then next > at the next page leave the Username, Password, Domain Blank and hit Finish. Try now to connect using Pocket IExplorer

MMS Configurations

Go to Settings> at the bottom tap Connections>Inside it tap another Connections> then Advanced> Select Network> Under Network Management -" In My ISP" - tap NEW> Under "MY ISP Name" – set to SmartMMS > tap MODEM at the bottom,> tap" New" ,> Under Make a New Connection - Enter a new connection name (SmartMMS) , Under Select a modem - tap " cellular line (GPRS, 3G)", then "Next" > Under Access Point name enter – mms then next > at the
next page leave the Username, Password, Domain Blank and hit Finish Go back to the network management again and select whatever you wrote for "GPRS connection " > ok

2. Go to Start >Messaging> Menu - Under menu select MMS Configuration > at the next page bottom tap "Servers" > then tap New > Fill up the following
Server Name : SmartMMS
Gateway : 10.102.61.46
Port Number : 8080
Server Address : http://10.102.61.238:8002
Connect via : to whatever you enter in Network
Management area for MMS connection
Sending Size : 100K or try 250 K
Wap Version : Try either 1.2 or 2.0
>>Tap OK

this is for xda exec but im sure it can be used for hermes. hope this helps