PDA

View Full Version : car holder for MDA compact III


xda_guy
10th June 2007, 01:57 AM
Hello,

I wanted to get a car holder for my MDA Compact III,

do you guys recommend an air vent car holder or a windscreen mount phone holder?

mikealder
10th June 2007, 09:32 AM
Have a look at the Brodit range they do a nice holder active and passive and a number of options to hold the unit in your car. I use the Brodit and HR holders in my vehicle - have a read of http://www.pocketgpsworld.com/broditartemis.php for a few details - Mike

xda_guy
10th June 2007, 03:30 PM
thanks for the reply,

is the HR one the windscreen mount phone holder?

mikealder
10th June 2007, 03:45 PM
The write up contained Brodit products, only one part was the HR holder coupled to the Brodit Pro-Clip, you can see the three pictures using the HR Holder around the text -
"The HR mount is supplied with a flexible arm and windscreen suction cup, I much prefer the Brodit Pro clip as it provides a more stable mounting solution that is vibration free."
or read my post at this link http://www.pocketgpsworld.com/modules.php?name=Forums&file=viewtopic&t=48131&postdays=0&postorder=asc&start=51


Both Brodit and the HR units can be used with a winscreen holder or Pro clips, an edless choice of options depending on the vehicle and phone - Mike

xda_guy
10th June 2007, 08:03 PM
thanks for the reply,

i am a bit confused as to how to select the car holder. i am a bit concerned as to if the car holder would fit the MDA copact III.

i checked in the t-mobile store and they are doing something for 10 pounds. the upside is if it does not fit, i can return it.
but then i be limited to a certain choice.

not sure if i should be going for something that attaches to the vents or something that sticks to the windscreen.

i came across this one
http://www.lhdigital.co.uk//product_info.php?cPath=6_127&products_id=126

is there much between two holders?

mikealder
10th June 2007, 08:24 PM
Its quite a simple choice to be honest, are you happy to entrust a cheap £10 holder from the shop that can mount a mutitude of devices or get a specific holder that has a degree of quality about it?
I have a T-Mobile generic holder and its CR*P - I certainly wouldn't use it to hold a device worth around £400 - your choice - the position is down to what suits you and the style of mount/ Pro clip available for your car - or go with the cheap offerings and take a chance - Mike

xda_guy
10th June 2007, 09:27 PM
thanks for the reply mike,

i think i will go with a nice decent holder.

i looked ath the herbert rickter mount in the post, and the verdict is that it vibrates.
would it be correct to say that all windscreen mounts vibrate?

i have been using the regular tomtom on the windscreen. so i am used to that.

does a pda on the air vent enable easy viewing for navigation purposes (i guess one gets used to it)

are all the herbert richter's the screen mounts.

what is pro clip?

xda_guy
10th June 2007, 09:29 PM
thanks for the reply mike,

i think i will go with a nice decent holder.

i looked ath the herbert rickter mount in the post, and the verdict is that it vibrates.
would it be correct to say that all windscreen mounts vibrate?

i have been using the regular tomtom on the windscreen. so i am used to that.

does a pda on the air vent enable easy viewing for navigation purposes (i guess one gets used to it)

are all the herbert richter's the screen mounts.

what is pro clip?

stunno
12th June 2007, 11:27 PM
Well I trust my device to a £3.50 flexible windscreen mount from ebay, and it works perfectly!

I've tried vent mounts, but they are generally rubbish - but it could be my vents! I've tried magnetic ones but they don't stick to my dash - it could be my dash! So far, the windscreen one has been perfect! Although it did wiggle about a bit until I 'adjusted' it by getting it to rest against the instrument console. Not a judder out of it now! and I highly recommend it and the £36.50 saving :)

ayde66
13th June 2007, 11:33 AM
where t mobil mda compact ııı wm6 rom

xda_guy
13th June 2007, 11:30 PM
thanks for the reply stunno,

what is the make of your windscreen mda holder?

stunno
14th June 2007, 08:30 PM
It was this one
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160072850929&ssPageName=ADME:B:EOIBSA:UK:11

but I was mistaken about the price, sorry. It was 99p +£2.99 postage ;)

EDIT: they are being sold by someone else now
http://cgi.ebay.co.uk/Air-Vent-Mount-Suction-Car-Holder-Cradle-Phone-PDA-iPOD_W0QQitemZ230142021787QQihZ013QQcategoryZ10364 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

and the postage is only £1.99

xda_guy
17th June 2007, 01:26 AM
thanks for the reply,
i went to the site and though it says that 5 are available i cant seem to be able to buy it.
i think they are all sold out. if you come across any other holders do let me know.

stunno
17th June 2007, 10:28 AM
Search ebay for
"Air Vent Mount Suction Car Holder"

there are quite a few

dannyoneill
17th June 2007, 08:42 PM
I personally use a Brodit mount attached to a Dashmout bracket.

The wives Vario also uses a brodit mount but attched using a Brodit Proclip, nice and easy to install.

See attched for my car. Need a new pic with the phone attched.

http://img248.imageshack.us/img248/5001/img3789kw3.jpg