USPL - 100% Working in vista

[grabson79]

I have a long fight with USPL and vista, but finally yesterday I won.

All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte

Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.

Thanks pof for your great release

[tom_codon]

I have a long fight with USPL and vista, but finally yesterday I won.

All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte

Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.

Thanks pof for your great release

Thanks for news about it..!
Worked for me. :D

[jefflefou]

Works Great !

[bigbit[pt]]

Working great!!!

Used it to upgrade to WM6 (bepe's) and later, GSM (2.93.90)!!

Big

[woggle]

Thank you, this helped me USPL my orbit on vista.

[mavericke]

Oh...My...God! That is so cool of you! Many thanks!!!

[Sharkey1802]

at step 4: do i stop after the DOS part? Or do i continue with the screen with the big picture of a mobile?
Because after the DOS part vista installs the drivers but i'm not yet in the bootloader screen on my mobile (but i've got a white screen).

at step 6: When i untick "allow USB connections" in the WMDC, my mobile is no longer in the Device Manager list so how can i then change te drivers to the XP drivers?

[j3roen]

at step 4: do i stop after the DOS part? Or do i continue with the screen with the big picture of a mobile?
Because after the DOS part vista installs the drivers but i'm not yet in the bootloader screen on my mobile (but i've got a white screen).

at step 6: When i untick "allow USB connections" in the WMDC, my mobile is no longer in the Device Manager list so how can i then change te drivers to the XP drivers?

First put your Artemis into bootloader then connect to your PC. Vista will install a driver for a PDA but this driver is not correct. You can find the correct drivers in the posts above this. After installing the NEW drivers you can reset your artemis and disconnect it from your pc. Restart it and just run USPL again. Has to work now.
Good luck!

[ffelan]

ok what am i doing wrong...?

have followed all the steps above... but still get a 270?

am on official O2 uk WM6 rom but want to upgrade radio as performance / batt life have become dire since moving from the HTC WM6 rom to the offical O2 one....

device now syncs without drop out having changed driver to the old 2004 one... but still cant upgrade radio or USPL or anything ......


HELP!

[ffelan]

the odd thing is the O2 wm6 rom updates fine within vista. but nothing will go over the top of it?

[ffelan]

o21 exchanged my orbit... new one updates fine.. woohooo

[jahrami]

first thanks for the news now we know the uspl works on vista
second 2. Do a hard reset or clean storage (some programs like battery status block full access to your device) is interesting to know this

I have a long fight with USPL and vista, but finally yesterday I won.

All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte

Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.

Thanks pof for your great release

[wheeny]

I succesfully flashed my Artemis (after using USPL)... At the moment, I'm tired of my cooked ROM and I would like to install a new ROM. Do I have to use USPL a second time? :confused:
Bootloader screen says: SPL 1.11.100 (or something like that...):rolleyes:

Many thanx... :D

[sascha l]

Doesn't work, because Vista says that it is not a Vista driver. How did you all installed the drivers under vista???