Help ! One of the bricked phone society....

[evileyes]

I just got a softbank x01ht and it bricked when i tried to flash a wm6 rom made by WM6 ROM Kitchen of bepe and the koch v0.99.........

it just stay at "softbank" screen and nothing comes out.... i can enter the bootloader mode and KITL enabled.....

I tried use mitty but it only show "cmd" instead of "usb".....
and anyway, here's what i got from mitty...


________________________________________

Cmd>checkimage
IPL CRC checksum = 0xF703D3F0

SPL CRC checksum = 0xC27E0E42

CE CRC checksum = 0x2AC4C63F

ExtROM CRC checksum = 0x231B5515

Radio Image CRC checksum = 0x6A8DFA7


Cmd>info 2
HTCSSuperCID婩軫TCE
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x1EB00
Partition[3], type=0x4, start=0x21C00, total=0x18C00

CE Total Length(with sector info) = 0x448E000
CE CheckSum Length(without sector info) = 0x4380000

Cmd>task 32
Level = 0

Cmd>lnbs SPL-1.01.nbs 50020000
:F=SPL-1.01.nbs
:A=50020000
:O=00000000
:L=FFFFFFFF

start NB image download
SH
Load ADDR: 50020000 Length: 402C4
***
SPL flag is incorrect, please check your SPL is correct.
Write NAND error, addr=0x50020000
Error !! The image must be in ROM area.
____________________________________________

what can i do now ? I've read thru the forum and wiki, but still don't know what to do..... please help........

[evileyes]

Will the KITL method works for me ? I will go for that if there's no other choices........ coz it will take few hours.......

[mrvanx]

You REALLY need to post this in the unbricking thread at the top of this forum dude. that thread is already full of info, theres no need for a new thread ;)

[evileyes]

thanks for the direction mrvanx